Polymerization of an epoxy‐containing silacyclobutane and its application to networked polymer synthesis

Polymerization of a silacyclobutane having an epoxy moiety and its application to networked polymer synthesis were examined. Four‐membered ring‐opening polymerization of silacyclobutane having a 3,4‐epoxybutyl group on the silicon atom (OBMSB) was achieved by using a platinum vinyldisiloxane complex with keeping the epoxy ring unchanged. Copolymerization of 1,1‐diethylsilacyclobutane (DESB) with OBMSB by using the same catalyst effectively gave the corresponding copolymers [poly(DESB‐co‐OBMSB)]. Thermal properties of the polyOBMSB, polyDESB, and poly(DESB‐co‐OBMSB) were investigated by DSC and TGA. Cast films of the obtained polymers with 1‐naphthylmethylmethyl‐p‐hydroxyphenylsulfonium hexafluoroantimonate, a small amount of thermally latent acid generator were prepared. Heating the films at 80 °C for 2 h gave crosslinked networked polycarbosilanes through cationic ring‐opening of the epoxy moieties. Thermal and mechanical properties of the networked polymers were investigated by TGA, DSC, and tensile strength measurements. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3400–3405     

Synthesis of bicyclic bis(γ‐butyrolactone) derivatives bearing sulfide moieties and their alternating copolymers with epoxide

A series of bicyclic bis(γ‐butyrolactone)s (BBL) bearing sulfide moiety 2 were readily synthesized from a precursor BBL bearing isopropenyl group 1. This efficient and versatile synthesis of 2 was achieved by a highly reliable radical addition reaction of thiols to the C‐C double bond in the isopropenyl group 2 underwent anionic copolymerization with glycidyl phenyl ether in a 1:1 alternating manner to give a series of the corresponding polyester 3, of which side chains inherited the sulfide group from 2. The glass transition temperatures (T_g) of 3 showed clear dependence on the flexibility of the sulfide side chains. The scope of this copolymerization system was further expanded by synthesizing a bifunctional BBL 4 from 1 with using hexanedithiol and performing its copolymerization with bisphenol A diglycidyl ether 5. The copolymerization gave the corresponding networked polymer in high yield. During the copolymerization, the volume expanding nature of the double ring‐opening reaction of 4 contributed to the efficient compensation of the intrinsic volume shrinkage of the ring‐opening of epoxide to achieve a shrinkage‐free curing system. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and cationic ring‐opening polymerization of oxetane monomer containing five‐membered cyclic carbonate moiety via highly chemoselective addition of CO2

The bicyclic amidinium iodide effectively catalyzed the reaction of carbon dioxide and the epoxy‐containing oxetane under ordinary pressure and mild conditions with high chemoselectivity to give the corresponding oxetane monomer containing five‐membered cyclic carbonate quantitatively. The cationic ring‐opening polymerization of the obtained monomer by boron trifluoride diethyl ether proceeded to give linear polyoxetane bearing five‐membered cyclic carbonate pendant group in high yield. The molecular weight of the polyoxetane was higher than that of polyepoxide obtained by the cationic ring‐opening polymerization of epoxide monomer containing five‐membered cyclic carbonate. The cyclic carbonate functional crosslinked polyoxetanes were also synthesized by the cationic ring‐opening copolymerization of cyclic carbonate having oxetane and commercially available bisoxetane monomers. Analyses of the resulting polyoxetanes were performed by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2606–2615     

Anionic alternating copolymerization of epoxide and six‐membered lactone bearing naphthyl moiety

This article describes the anionic copolymerization of glycidyl phenyl ether (GPE) and 1,2‐dihydro‐3H‐naphtho[2,1‐b]pyran‐3‐one (DHNP), a six‐membered aromatic lactone bearing naphthyl moiety. The copolymerization proceeded in a 1:1 alternating manner, to afford the corresponding polyester. The ester linkage in the main chain was cleavable by reduction with lithium aluminum hydride to give the corresponding diol that inherited the structure of the alternating sequence. The copolymerization ability of DHNP permitted its addition as a comonomer to an imidazole‐initiated polymerization of bisphenol A diglycidyl ether. The resulting networked polymer, of which main chain was endowed with the DHNP‐derived rigid naphthalene moieties, showed a higher glass transition temperature than that obtained similarly with using 3,4‐dihydrocoumarin (DHCM) as a comonomer, an analogous aromatic lactone bearing phenylene moiety instead of naphthalene moiety of DHNP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and radical polymerization of styrene‐based monomer having a five‐membered cyclic carbonate structure

A styrene‐based monomer having a five‐membered cyclic carbonate structure, 4‐vinylbenzyl 2,5‐dioxoran‐3‐ylmethyl ether (VBCE), was prepared by lithium bromide‐catalyzed addition of carbon dioxide to 4‐vinylbenxyl glycidyl ether (VBGE). Radical polymerization of the obtained VBCE was carried out using 2,2′‐azobisisobutyronitrile as an initiator. PolyVBCE with number‐averaged molecular weight higher than 13,800 was obtained by a solution polymerization in N,N‐dimethylformamide, N,N‐dimethylacetamide, dimethyl sulfoxide, and methyl ethyl ketone. The glass transition temperature and 5 wt % decomposition temperature of the polyVBCE were determined to be 52 and 305 °C by differential scanning calorimetry and thermal gravimetry analysis, respectively. It was confirmed that a polymer consisting of the same VBCE repeating unit can be also obtained via chemical modification of polyVBGE, that is, a lithium‐bromide‐catalyzed addition of carbon dioxide to a polyVBGE prepared from a radical polymerization of VBGE. Further copolymerization of VBCE with styrene gave the corresponding copolymer in a high yield. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Photoactive Polymers with Benzocyclobutene/Silacyclobutane Dual Crosslinked Structure and Low Dielectric Constant

Low dielectric photopatternable materials have aroused much interest owing to their potential application as alternatives of conventional photoresists. Although a number of photosensitive groups have been established to construct photopatternable materials for many years, it is still a challenge to introduce them into polymer chains via a facile and control polymerization technique, such as living free radical polymerization. In this work, on the basis of the photoactive silaycyclobutene moiety, a new monomer, 1‐methyl‐1‐(4‐vinylphenyl) silacyclobutane (1‐MVPSCB), was synthesized and demonstrated successful to conduct atom transfer radical polymerization (ATRP). Subsequently, the copolymerization of 1‐MVPSCB with 4‐vinylbenzocyclobutene (4‐VBCB) and styrene produced a kind of benzocyclobutene/silacyclobutane double‐crosslinked polymer (BS‐DCP) with controlled benzocyclobutene/silacyclobutane ratios and low polydispersity index. Owing to the UV/thermally dual crosslinked structure, BS‐DCP possesses photapatternability, high dimensional stability and low dielectric constant (2.37 at 10 MHz). These properties make BS‐DCP a potential photoresist that could be directly used as interconnected dielectrics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1920–1928     

Cationic ring‐opening polymerization behavior of a five‐membered cyclic thiocarbonate having a spiro‐linked adamantane moiety

This work deals with the synthesis and cationic ring‐opening polymerization behavior of a novel five‐membered cyclic thiocarbonate bearing a spiro‐linked adamantane moiety, tricyclo[3.3.1.1^3,7]decane‐2‐spiro‐4′‐(1′,3′‐dioxolane‐2′‐thione) ( TC2 ). The cationic ring‐opening polymerization of TC2 did not proceed with trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, triethyloxonium tetrafluoroborate (Et₃OBF₄), boron trifluoride etherate (BF₃OEt₂), titanium tetrachloride, or methyl iodide as the initiator, presumably because of the steric hindrance of the adamantane moiety. However, the cationic ring‐opening copolymerization of TC2 with five‐ or six‐membered cyclic thiocarbonates, that is, 1,3‐dioxolane‐2‐thione, 1,3‐dioxane‐2‐thione, 5‐methyl‐1,3‐dioxane‐2‐thione, or 5,5‐dimethyl‐1,3‐dioxane‐2‐thione, initiated by BF₃OEt₂ or Et₃OBF₄, proceeded to afford the corresponding copolymer via a selective ring‐opening direction. The increase in the feed ratio of TC2 in the copolymerization increased the unit ratio derived from TC2 in the copolymer; however, the molecular weight of the copolymer decreased. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 699–707, 2003     

Multifunctional Cyclic Carbonates Comprising Hyperbranched Polyacetals: Synthesis and Applications to Polymer Electrolytes and Networked Polymer Materials

Hyperbranched polyacetals (HBPAs) bearing cyclic carbonate (CC) terminals were synthesized from protocatechuric aldehydes bearing bifunctional trimethylolpropane (TMP) or glycerol (Gly) structures and then utilized to design polymer electrolytes and networked polymer materials. Since TMP‐based cyclic acetals (CAs) are thermodynamically more stable than Gly‐derived CSs, the copolymerization of these monomers favors to form HBPAs comprising TMP‐based acetal stems and Gly terminals. Consequently, HBPAs composed of larger amounts of TMP or Gly terminals were separately synthesized by changing monomer feed ratios. Their diol terminals react efficiently with diphenyl carbonate to give HBPAs bearing 5‐ or 6‐membered CC (5‐CC or 6‐CC) terminals. HBPAs bearing 5‐CC terminals were mixed homogeneously with lithium bis(trifluoromethanesulfonyl)imide to form uniform films showing lithium ion conductivity ranging from 8.2 × 10^?9 to 2.1 × 10^?3 S cm^?1 at 23–80 °C, whereas networked polycarbonate and polyhydroxyurethane films were successfully fabricated using HBPAs having CC terminals. These results apparently indicate that HBPAs having CC terminals are useful scaffolds to design functional polymer materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2295–2303     

Expected and unexpected reactions in ring‐opening (co)polymerization

This review covers most of the authors' work on ring‐opening polymerization and copolymerization of heterocyclic monomers during the time of their cooperation since 1985. The mechanistic aspects of anionic ring opening polymerization of cyclic carbonates with a variety of functional groups are described first. By sequential polymerization of first styrene, methyl methacrylate or suitable heterocyclic monomers and then secondly a cyclic carbonate, the site transformation is highlighted. The influence of the chemical nature of macroinitiators with identical active sites on the course of polymerization of cyclic carbonates was studied for poly(ethylene oxide), poly(tetrahydrofuran), and poly(dimethylsiloxane) macroinitiators. For the copolymerization of cyclic carbonates with lactones and lactide the dependence of the polymer microstructure on the polymerization conditions is discussed on the basis of the copolymerization mechanism. The copolymerization of cyclic carbonates with ε‐caprolactam and with tetramethylene urea results in an alternating copolymer, i. e. a poly(ester urethane) and an [m, n]‐polyurethane, respectively, the key step being the insertion of the lactam or the cyclic urea into the carbonate chain. The cationic ring opening polymerization of cyclic six and seven membered carbamates leading to [4]‐ and [5]‐polyurethane with uniform microstructure is reported with respect to kinetic, mechanistic, and thermodynamic aspects. This new access to [n]‐polyurethanes by a chain growth reaction allows the synthesis of well defined polymer architectures with polyurethane sequences. Sequential polymerization of tetrahydrofuran and the cyclic carbamate with mono‐ and bifunctional initiators leads to the respective A–B and B–A–B block copolymers. Site transformation from the oxonium to the immonium active species is the key step in the polymerization mechanism. Finally, mechanistic aspects of the ring‐opening polymerization of cyclic ester‐amides are presented.     

Cationic addition polymerization of 1,4‐dioxene using gacl3 as lewis acid catalyst: Long‐lived species‐mediated polymerization

Effective cationic addition polymerization of 1,4‐dioxene, a six‐membered cyclic olefin with two oxygen atoms adjacent to the double bond, was performed using a simple metal halide catalyst system in dichloromethane. The polymerization was controlled when the reaction was conducted using GaCl₃ in conjunction with an isobutyl vinyl ether–HCl adduct as a cationogen at –78°C to give polymers with predetermined molecular weights and relatively narrow molecular weight distributions. The long‐lived properties of the propagating species were further confirmed by a monomer addition experiment and the analyses of the product polymers by ¹H NMR and MALDI–TOF–MS. Although highly clean propagation proceeded, the apparent rate constant changed during the controlled cationic polymerization of 1,4‐dioxene. The reason for the change was discussed based on polymerization results under various conditions. The obtained poly(1,4‐dioxene) exhibited a very high glass transition temperature (T_g) of 217°C and unique solubility. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and properties of star‐shaped polymers by the ring‐opening polymerization of cyclic carbonate initiated with a trifunctional,poly(ethylene glycol)‐based surfactant

Amphiphilic, star‐shaped copolymers were synthesized by the ring‐opening polymerization of trimethylene carbonate initiated with a trifunctional, poly(ethylene glycol)‐based surfactant (polyoxyethylene sorbitan monolaurate) in the absence of any catalysts. The metal‐ and solvent‐free polymerization proceeded at 150 °C and afforded polyoxyethylene sorbitan monolaurate‐block‐poly(trimethylene carbonate) with number‐average molecular weights of 4500–11,900 in excellent yields. The copolymers successfully dispersed in a water/ethyl acetate (10/1 v/v) mixture, and the uniform suspension could contain a hydrophobic pigment and pyrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6633–6639, 2006     

Conductive networked polymer gel electrolytes composed of poly(meth)acrylate,lithium salt,and ionic liquid

Self‐standing films of (meth)acrylate‐based polymer gel electrolytes with high ionic liquid content (80 wt %) were prepared by in situ thermally or photo induced radical copolymerization of mono‐functional and di‐functional (meth)acrylates in an ionic liquid in the presence/absence of a lithium salt. Their ionic conductivity, thermal property, mechanical property, and flammability were examined. 1‐Ethyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide (EMImTFSI) or 1‐ethyl‐3‐methylimidazolium bis(fluorosulfonyl)imide (EMImFSI) was used as the ionic liquid, and lithium bis(trifluoromethanesulfonyl)imide LiTFSI was used as the lithium salt. The obtained films were semitransparent and flexible with good to moderate thermal stability and mechanical strength with high ionic conductivity. The EMImFSI‐containing gel electrolytes showed higher ionic conductivity than the corresponding EMImTFSI‐containing gel electrolytes. The ionic conductivity in the acrylate‐based gel electrolytes was slightly increased by addition of lithium salt, while that in the corresponding methacrylate‐based electrolytes was decreased significantly. The flame test showed the ionic liquid containing networked polymer gel electrolytes to have low if any flammability and was therefore confirmed to be highly safe. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cationic polymerization of seven‐membered cyclic monothiocarbonate 1,3‐dioxepan‐2‐thione

The cationic ring‐opening polymerization of a seven‐membered cyclic monothiocarbonate, 1,3‐dioxepan‐2‐thione, produced a soluble polymer through the selective isomerization of thiocarbonyl to a carbonyl group {? [SC(C?O)O(CH₂)₄]_n? }. The molecular weights of the polymer could be controlled by the feed ratio of the monomer to the initiators or the conversion of the monomer during the polymerization, although some termination reactions occurred after the complete consumption of the monomer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1014–1018, 2005     

Synthesis of core‐crosslinked carbosilane block copolymer micelles and their thermal transformation to silicon‐based ceramics nanoparticles

Carbosilane fine particles were synthesized by core‐crosslinking of carbosilane block copolymer micelles and they were pyrolytically transformed into silica nanoparticles. The carbosilane block copolymer, poly(1‐(3‐butenyl)‐1‐methylsilacyclobutane)‐block‐polystyrene, (polyBMSB‐b‐polySt), [(m, n) = (31, 16), (54, 30), and (75, 28)], was synthesized by anionic polymerization of BMSB and St, where m and n represent polymerization degrees of BMSB and St segments, respectively. The block copolymer formed micelles in N,N‐dimethylformamide (DMF). The hydrodynamic diameters (D_h) of the micelles evaluated by dynamic light scattering ranged from 40 to 158 nm depending on the copolymer molecular weight. The core of the micelle was cross‐linked by Pt‐catalyzed hydrosilation with 1,2‐bis(dimethylsilylethane). The D_h of the core‐cross‐linked micelles in THF ranged from 56 to 164 nm. These precursor particles were pyrolyzed at 850 °C under N₂ to give ceramic nanoparticles. The diameters of the spherical ceramic particles estimated by AFM ranged from 25 to 60 nm. X‐ray fluorescence analysis of the ceramic products revealed that it consisted of mainly SiO₂ rather than SiC. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3778–3787, 2005     

Synthesis and characterization of novel aliphatic polycarbonates

A new six‐membered cyclic carbonate monomer, 5‐benzyloxy‐trimethylene carbonate, was synthesized from 2‐benzyloxy‐1,3‐propanediol, and the corresponding polycarbonate, poly(5‐benzyloxy‐trimethylene carbonate) (PBTMC), was further synthesized by ring‐opening polymerization in bulk at 150 °C using aluminum isobutoxide [Al(OⁱBu)₃], aluminum isopropoxide, or stannous octanoate as an initiator. The results showed that a higher molecular weight polycarbonate could be obtained in the case of Al(OⁱBu)_3. The protecting benzyl group was removed subsequently by catalytic hydrogenation to give a polycarbonate containing a pendant hydroxyl group (PHTMC). The polycarbonates obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR,¹³C NMR, gel permeation chromatography, and DSC. NMR results of PBTMC offered no evidence for decarboxylation occurring during the propagation. The pendant hydroxyl group in PHTMC resulted in an enhancement of the hydrophilicity of the polycarbonate. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 70–75, 2002     

Radical ring‐opening polymerization of five‐membered cyclic vinyl sulfone using p‐toluenesulfonyl halides

Radical ring‐opening polymerizations of a five‐membered cyclic vinyl sulfone monomer, 2‐vinylthiolane‐1,1‐dioxide (VTDO), was carried out by using p‐toluenesulfonyl iodide (TosI) and bromide (TosBr) as radical initiators, and the corresponding ring‐opened polymer (PVTDO) was obtained. Both TosI and TosBr were found to work as the radical initiators for the polymerization of VTDO in bulk. The use of TosI gave PVTDOs with a broad, multimodal distribution of molecular weight in low yields. When 10 mol % of TosBr was employed, the isolated yield of PVTDO reached 49%, and the obtained PVTDO had a relatively narrow, monomodal molecular weight distribution of 1.8 with an M_n of 4100. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Cyclopolymerization of dipropargylfluorene by transition‐metal catalysts

A fluorene‐containing spiro‐type conjugated polymer, poly(dipropargylfluorene), was synthesized via the cyclopolymerization of dipropargylfluorene by Mo‐ and W‐based transition‐metal catalysts. The polymerization of dipropargylfluorene proceeded well by MoCl₅ catalyst itself to give a quantitative yield of polymer. The Mo‐based catalysts are more effective than those of W‐based catalysts. The structure of poly(dipropargylfluorene) was characterized by various instrumental methods (NMR, IR, and UV–visible spectroscopies) to have the conjugated polymer backbone carrying fluorene moieties. Analysis of the ¹³C NMR spectrum revealed that the polymer structure consists of only six‐membered rings. The resulting poly(dipropargylfluorene)s were brown or black powder and soluble in aromatics and halogenated hydrocarbons such as benzene, chlorobenzene, tetrahydrofuran, chloroform, and methylene chloride. Thermal and morphological properties of the polymer are also discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4101–4109, 2001     

Amphiphilic PEG‐grafted poly(ester‐carbonate)s: Synthesis and diverse nanostructures in water

Novel biodegradable amphiphilic graft copolymers containing hydrophobic poly(ester‐carbonate) backbone and hydrophilic poly(ethylene glycol) (PEG) side chains were synthesized by a combination of ring‐opening polymerization and “click” chemistry. First, the ring‐opening copolymerization of 5,5‐dibromomethyl trimethylene carbonate (DBTC) and ε‐caprolactone (CL) was performed in the presence of stannous octanoate [Sn(Oct)₂] as catalyst, resulting in poly(DBTC‐co‐CL) with pendant bromo groups. Then the pendant bromo groups were completely converted into azide form, which permitted “click” reaction with alkyne‐terminated PEG by Huisgen 1,3‐dipolar cycloadditions to give amphiphilic biodegradable graft copolymers. The graft copolymers were characterized by proton nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectra and gel permeation chromatography measurements, which confirmed the well‐defined graft architecture. These copolymers could self‐assemble into micelles in aqueous solution. The size and morphologies of the copolymer micelles were measured by transmission electron microscopy and dynamic light scattering, which are influenced by the length of PEG and grafting density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and polymerization of 5‐(methacrylamido)tetrazole,a water‐soluble acidic monomer

The reaction of methacryloyl chloride with 5‐aminotetrazole gave the polymerizable methacrylamide derivative 5‐(methacrylamido)tetrazole ( 4 ) in one step. The monomer had an acidic tetrazole group with a pK_a value of 4.50 ± 0.01 in water methanol (2:1). Radical polymerization proceeded smoothly in dimethyl formamide or, after the conversion of monomer 4 into sodium salt 4‐Na , even in water. A superabsorbent polymer gel was obtained by the copolymerization of 4‐Na and 0.08 mol % N,N′‐methylenebisacrylamide. Its water absorbency was about 200 g of water/g of polymer, although the extractable sol content of the gel turned out to be high. The consumption of 4‐Na and acrylamide (as a model compound for the crosslinker) during a radical polymerization at 57 °C in D₂O was followed by ¹H NMR spectroscopy. Fitting the changes in the monomer concentration to the integrated form of the copolymerization equation gave the reactivity ratios r _4‐Na = 1.10 ± 0.05 and r_acrylamide = 0.45 ± 0.02, which did not differ much from those of an ideal copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4333–4343, 2002     

Allyl ethers as combined plasticizing and crosslinkable side groups in polycarbonate‐based polymer electrolytes for solid‐state Li batteries

Allyl ether‐functional polycarbonates, synthesized by organocatalytic ring‐opening polymerization of the six‐membered cyclic carbonate monomer 2‐allyloxymethyl‐2‐ethyltrimethylene carbonate, were used to prepare non‐polyether polymer electrolytes. UV‐crosslinking of the allyl side groups provided mechanically stable electrolytes with improved molecular flexibility—T_g below ?20 °C—and higher ionic conductivity—up to 4.3 × 10^?7 S/cm at 25 °C and 5.2 × 10^?6 S/cm at 60 °C—due to the plasticizing properties of the allyl ether side groups. The electrolyte function was additionally demonstrated in thin‐film Li battery cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2128–2135