Cationic addition polymerization of 1,4‐dioxene using gacl3 as lewis acid catalyst: Long‐lived species‐mediated polymerization

Effective cationic addition polymerization of 1,4‐dioxene, a six‐membered cyclic olefin with two oxygen atoms adjacent to the double bond, was performed using a simple metal halide catalyst system in dichloromethane. The polymerization was controlled when the reaction was conducted using GaCl₃ in conjunction with an isobutyl vinyl ether–HCl adduct as a cationogen at –78°C to give polymers with predetermined molecular weights and relatively narrow molecular weight distributions. The long‐lived properties of the propagating species were further confirmed by a monomer addition experiment and the analyses of the product polymers by ¹H NMR and MALDI–TOF–MS. Although highly clean propagation proceeded, the apparent rate constant changed during the controlled cationic polymerization of 1,4‐dioxene. The reason for the change was discussed based on polymerization results under various conditions. The obtained poly(1,4‐dioxene) exhibited a very high glass transition temperature (T_g) of 217°C and unique solubility. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Living cationic polymerization of vinyl ethers with a naphthyl group: Decisive effect of the substituted position on naphthalene ring

Living cationic polymerization of a vinyl ether with a naphthyl group [2‐(2‐naphthoxy)ethyl vinyl ether, βNpOVE] was achieved using base‐assisting initiating systems with a Lewis acid. The Et_1.5AlCl_1.5/1,4‐dioxane or ethyl acetate system induced the living cationic polymerization of βNpOVE in toluene at 0 °C. The living nature of this reaction was confirmed by a monomer addition experiment, followed by ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) analyses. In contrast, the polymerization of αNpOVE was not fully controlled; under similar conditions, it produced polymers with broad molecular weight distributions. The ¹H NMR and MALDI‐TOF‐MS spectra of the resultant poly(αNpOVE) revealed that the products had undesirable structures derived from Friedel–Crafts alkylation. The higher reactivity of αNpOVE in electrophilic substitution reactions, such as the Friedel–Crafts reaction, was attributable to the greater electron density of the naphthyl ring, which was calculated based on frontier orbital theory. The naphthyl groups significantly affected the properties of the resultant polymer. For example, the glass transition temperatures (T_g) of poly(NpOVE)s are higher by approximately 40 °C than that of poly(2‐phenoxyethyl vinyl ether). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Living cationic polymerization of isobutyl vinyl ether using a variety of metal oxides as heterogeneous catalysts: Robust,reusable, and environmentally benign initiating systems

Cationic polymerization of isobutyl vinyl ether (IBVE) was examined using a variety of metal oxides in conjunction with IBVE–HCl adduct as a cationogen in toluene at 0 °C. Iron oxides (α‐Fe₂O₃, γ‐Fe₂O₃, and Fe₃O₄) induced living polymerization in the presence of an added base, ethyl acetate or 1,4‐dioxane, to give polymers with very narrow molecular weight distributions (MWDs). Conversely, with other metal oxides such as Ga₂O₃, In₂O₃, ZnO, Co₃O₄, and Bi₂O₃, polymers with bimodal MWDs, including long‐lived species along with uncontrolled higher molecular weight portions, were produced in the presence of an added base. A small amount of nBu₄NCl or 2,6‐di‐tert‐butylpyridine (DTBP) suppressed the uncontrolled portion to induce controlled reactions with Ga₂O₃, In₂O₃, and ZnO. The roles of these reagents are discussed in terms of the nature of the active sites of the catalyst surface and the polymerization mechanisms. In addition, the reusability of the catalyst, the effect of stirring before and during polymerization, and the estimation of the number of active sites are also described. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 916–926, 2010     

Selectively degradable alternating copolymers of isobutyl vinyl ether and plant‐derived aldehydes with acyclic side chains: Effects of side group structures on copolymerization behaviors

Side group structures of aldehydes were demonstrated to have decisive effects on cationic copolymerizations with alkyl vinyl ether (VE). Alternating copolymerizations of isobutyl VE (IBVE) and plant‐derived aldehydes with acyclic side chains such as trans‐2,cis‐6‐nonadienal, trans‐2‐nonenal, and citral proceeded under appropriate reaction conditions with the EtSO₃H/GaCl₃ initiating system. In addition, some aldehydes copolymerized in a well‐controlled fashion to yield alternating copolymers with controlled molecular weights and narrow molecular weight distributions. Quantitative and selective acid hydrolysis of the resulting alternating copolymers, based on the acetal structures in the main chains, was also achieved to give other conjugated aldehydes as nearly sole degradation products. Copolymerization results of IBVE and various plant‐derived aldehydes with acyclic or cyclic side groups suggested that electron‐donating ability and bulkiness of the side groups were most likely responsible for the alternating and/or controlled copolymerization behaviors. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4684–4693     

Synthesis of dual pH/temperature‐responsive polymers with amino groups by living cationic polymerization

For the precision synthesis of primary amino functional polymers, cationic polymerization of a phthalimide‐containing vinyl ether monomer precursor, 2‐vinyloxyethyl phthalimide (PIVE), was examined using a base‐assisting initiating system. Living polymerization of PIVE in CH₂Cl₂ in the presence of 1,4‐dioxane as an added base yielded nearly monodispersed polymers (M_w/M_n < 1.1) and higher molecular weight polymers, which have never been obtained using other initiating systems. Furthermore, block copolymers with hydrophobic or hydrophilic groups could be prepared. The deprotection of the pendant phthalimide groups gave well‐defined pH‐responsive polymers with pendant primary amino groups. Dual‐stimuli–responsive block copolymers having a pH‐responsive polyamine segment and a thermosensitive segment self‐assembled in water in response to both pH and temperature. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1207–1213, 2010     

Dansylation of Streptomyces subtilisin inhibitor: spectrometric analysis of the fluorescence-labeled inhibitor

Specific labeling of tyrosine residues of Streptomyces subtilisin inhibitor (SSI) was carried out by dansyl chloride. Analysis revealed that two tyrosine residues out of three in SSI were modified. The resulting fluorescent SSI was fully active as a subtilisin inhibitor. Fluorescence spectra of the modified SSI were investigated. Efficiency of energy transfer from intrinsic tryptophan residues of SSI to the introduced dansyl residue was found to be influenced by the complex formation of SSI with subtilisin.     

Synthesis of various stimuli‐responsive gradient copolymers by living cationic polymerization and their thermally or solvent induced association behavior

Stimuli‐responsive gradient copolymers, composed of various monomers, were synthesized by living cationic polymerization in the presence of base. The monomers included thermosensitive 2‐ethoxyethyl vinyl ether (EOVE) and 2‐methoxyethyl vinyl ether (MOVE), hydrophobic isobutyl vinyl ether (IBVE) and 2‐phenoxyethyl vinyl ether (PhOVE), crystalline octadecyl vinyl ether (ODVE), and hydrophilic 2‐hydroxyethyl vinyl ether (HOVE). The synthesis of gradient copolymers was conducted using a semibatch reaction method. Living cationic polymerization of the first monomer was initiated using a conventional syringe technique, followed by an immediate and continuous addition of a second monomer using a syringe pump at regulated feed rates. This simple method permitted precise control of the sequence distribution of gradient copolymers, even for a pair of monomers with very different relative monomer reactivities. The stimuli‐responsive gradient, block and random copolymers exhibited different self‐association behavior. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6444–6454, 2008     

Living cationic polymerization of α‐methyl vinyl ethers using SnCl4

Cationic polymerization of α‐methyl vinyl ethers was examined using an IBEA‐Et_1.5AlCl_1.5/SnCl₄ initiating system in toluene in the presence of ethyl acetate at 0 ～ ?78 °C. 2‐Ethylhexyl 2‐propenyl ether (EHPE) had a higher reactivity, compared to corresponding vinyl ethers. But the resulting polymers had low molecular weights at 0 or ?50 °C. In contrast, the polymerization of EHPE at ?78 °C almost quantitatively proceeded, and the number‐average molecular weight (M_n) of the obtained polymers increased in direct proportion to the EHPE conversion with quite narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight ≤ 1.05). In monomer‐addition experiments, the M_n of the polymers shifted higher with low polydispersity as the polymerization proceeded, indicative of living polymerization. In the polymerization of methyl 2‐propenyl ether (MPE), the living‐like propagation also occurred under the reaction conditions similar to those for EHPE, but the elimination of the pendant methoxy groups was observed. The introduction of a more stable terminal group, quenched with sodium diethyl malonate, suppressed this decomposition, and the living polymerization proceeded. The glass transition temperature of the obtained poly(MPE) was 34 °C, which is much higher than that of the corresponding poly(vinyl ether). This poly(MPE) had solubility characteristics that differed from those of poly(vinyl ethers). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2202–2211, 2008