A simple high‐performance liquid chromatography for the determination of linezolid in human plasma and saliva

Linezolid is an antimicrobial agent for the treatment of multiresistant Gram‐positive infections. A practical high‐performance liquid chromatography method was developed for the determination of linezolid in human plasma and saliva. Linezolid and an internal standard (o‐ethoxybenzamide) were extracted from plasma and saliva with ethyl acetate and analyzed on a Capcell Pak C₁₈ MG column with UV detection at 254 nm. The calibration curve was linear through the range 0.5–50 µg/mL using a 200 μL sample volume. The intra‐ and interday precisions were all <6.44% for plasma and 5.60% for saliva. The accuracies ranged from 98.8 to 110% for both matrices. The mean recoveries of linezolid were 80.8% for plasma and 79.0% for saliva. This method was used to determine the plasma and saliva concentrations of linezolid in healthy volunteers who were orally administered a 600 mg dose of linezolid. Our liquid–liquid extraction procedure is easy and requires a small volume of plasma or saliva (200 μL). This small volume can be advantageous in clinical pharmacokinetic studies, especially if children participate. Copyright © 2015 John Wiley & Sons, Ltd.     

Fluorescence Properties and Exciplex Formation of Emissive Naphthyridine Derivatives: Application as Sensors for Amines

Water-soluble donor–acceptor-type fluorophore 15Nap-Cl having two trifluoromethyl groups and a Cl group on a 1,5-aminonaphthyridine framework was prepared. Fluorophore 15Nap-Cl showed strong solvatochromic fluorescence, and, as the solvent polarity increased, a bathochromic shift was observed accompanied by an increase in the fluorescence quantum yield. In addition, in the presence of amines such as ethylamine, diethylamine, and aniline, further considerable bathochromic shifts in the fluorescence were observed. Density functional calculations identified the source of the fluorescence behavior as exciplex formation between 15-Nap-Cl and the corresponding amine. The fluorescence behavior was exploited to fabricate a sensor that can identify various primary, secondary, and tertiary amines.     

Effects of polyethylene spacer length in polymeric electrolytes on gelation of ionic liquids and ionogel properties

Polymer electrolytes containing N,N′-(trans-cyclohexane-1,4-diyl)dibenzamide linkages, polyethylene ((CH₂)_m, m = 2, 4, 10) spacers, and bis(trifluoromethanesulfonyl)amide (TFSA) or bis(fluorosulfonyl)amide (FSA) counteranions (polymer abbreviation: CDBAm•X; m = 2, 4, 10; X = TFSA, FSA) have been synthesized, adding to our previous report (m = 6). In addition, their ability to effect the gelation of six ionic liquids and the properties of the resulting ionogels have been examined. The polymers, except for CDBA10•TFSA, effect the gelation for all ionic liquids used in this study at fairly low concentrations (0.9–50 g/L). Ionogel ionic conductivity is not dependent on the spacer length, but does decrease slightly as increasing amounts of the gelatinizer are introduced. In contrast to ionic conductivity, the temperatures at which these ionogels transition into isotropic fluids is dependent on the spacer length; the gel composed of [EMI][FSA] and 100 g/L of CDBA6•FSA transforms at 120 °C, while the gel composed of [EMI][FSA] and 5 g/L of CDBA2•FSA does not transform into a sol even when temperatures become 155 °C. In brief, ionogel heat resistance can be improved by changing the spacer length of the polyelectrolyte. Finally, it has been determined using cyclic voltammetry that the potential window of the polyelectrolytes is particularly wide, ranging from −1.6 to 2.5 V. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 249–255     

Path to achieving molecular dispersion in a dense reactive mixture

A uniform dispersion of reactants is necessary to achieve a complete reaction involving multicomponents. In this study, we have examined the role of plasticizer in the reaction of two seemingly unlikely reactants: a highly crystalline hexamethylenetetramine (HMTA) and a strongly hydrogen bonded phenol formaldehyde resin. By combining information from NMR, infrared spectroscopy and differential scanning calorimetry, we were able to determine the role of specific intermolecular interactions necessary for the plasticizer to dissolve the highly crystalline HMTA and to plasticize the phenol formaldehyde resin in this crosslinking reaction. The presence of the plasticizer increased the segmental mobility, disrupted the hydrogen bonded matrix, and freed the hydroxyl units, which further increased the solubility of the HMTA. Both the endothermic and exothermic transitions are accounted for in the calorimetric data obtained. For the first time, it is possible to obtain the effective molar ratio of each component needed to complete the crosslinking reaction efficiently. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1519–1526     

Synthesis of Heat-resistant Polymers by Thiol–Ene Reaction of N-Allylmaleimide Copolymers Using Glycoluril Crosslinkers with Rigid Molecular Structures

We carried out the thermal curing of the copolymers of N-allylmaleimide (AMI) and 2-ethylhexyl acrylate (2EHA) using 1,3,4,6-tetra(2-mercaproethyl)glycoluril ( G1 ), 1,3,4,6-tetra(3-mercaptopropyl)glycoluril ( G2 ), 1,3,4,6-tetraallylglycoluril ( G3 ), triallylisocyanurate (TAIC), and pentaerythritol tetrakis(3-mercaptobutyrate) (PEMB) as the crosslinkers. Based on the results for the analysis of thiol–ene reactions monitored by IR spectroscopy, it was confirmed that the curing rate significantly depended on the combination of the used crosslinkers. The insoluble fraction after curing was more than 90% for the systems using the glycoluril crosslinkers, while the conversion of the allyl groups was suppressed due to the rigid structure of these crosslinkers. The heat resistance and the mechanical properties of the crosslinked polymers were investigated by thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, and mechanical tensile tests. For the products cured using the glycoluril crosslinkers, the glass transition temperature (T_g) and the maximum temperature of thermal decomposition (T_max) were 54–59 °C and 395–409 °C, respectively, being higher than those for the cured product prepared with PEMB and TAIC as the conventional crosslinkers. The elasticity (75–139 MPa), the maximum strength (3.0–4.1 MPa), and the adhesion strength (6.7–10.7 MPa) for the polymers cured with the glycoluril crosslinkers, determined by the mechanical tensile and single lap-shear adhesion tests, were higher than those for cured materials produced with PEMB. Thus, the thermal and mechanical properties of the maleimide copolymers were efficiently enhanced by crosslinking using the rigid glycoluril compounds. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 923–931     

Fabrication of Carbon Nanotube Thin Films for Flexible Transistors by Using a Cross-Linked Amine Polymer

Owing to their remarkable properties, single-walled carbon nanotube thin-film transistors (SWCNT-TFTs) are expected to be used in various flexible electronics applications. To fabricate SWCNT channel layers for TFTs, solution-based film formation on a self-assembled monolayer (SAM) covered with amino groups is commonly used. However, this method uses highly oxidized surfaces, which is not suitable for flexible polymeric substrates. In this work, a solution-based SWCNT film fabrication using methoxycarbonyl polyallylamine (Moc-PAA) is reported. The NH₂-terminated surface of the cross-linked Moc-PAA layer enables the formation of highly dense and uniform SWCNT networks on both rigid and flexible substrates. TFTs that use the fabricated SWCNT thin film exhibited excellent performance with small variations. The presented simple method to access SWCNT thin film accelerates the realization of flexible nanoelectronics.     

Molecular Insights into the Ligand-Based Six-Proton- and Six-Electron-Transfer Processes Between Tris-ortho-Phenylenediamines and Tris-ortho-Benzoquinodiimines

The global demand for energy and the concerns over climate issues renders the development of alternative renewable energy sources such as hydrogen (H₂) important. A high-spin (hs) Fe^II complex with o-phenylenediamine (opda) ligands, [Fe^II(opda)₃]²⁺ (hs- [6R] ²⁺), was reported showing photochemical H₂ evolution. In addition, a low-spin (ls) [Fe^II(bqdi)₃]²⁺ (bqdi: o-benzoquinodiimine) (ls- [0R] ²⁺) formation by O₂ oxidation of hs- [6R] ²⁺, accompanied by ligand-based six-proton and six-electron transfer, revealed the potential of the complex with redox-active ligands as a novel multiple-proton and -electron storage material, albeit that the mechanism has not yet been understood. This paper reports that the oxidized ls- [0R] [PF₆]₂ can be reduced by hydrazine giving ls-[Fe^II(opda)(bqdi)₂][PF₆]₂ (ls- [2R] [PF₆]₂) and ls-[Fe^II(opda)₂(bqdi)][PF₆]₂ (ls- [4R] [PF₆]₂) with localized ligand-based proton-coupled mixed-valence (LPMV) states. The first isolation and characterization of the key intermediates with LPMV states offer unprecedented molecular insights into the design of photoresponsive molecule-based hydrogen-storage materials.