Cationic polymerization of seven‐membered cyclic monothiocarbonate 1,3‐dioxepan‐2‐thione

The cationic ring‐opening polymerization of a seven‐membered cyclic monothiocarbonate, 1,3‐dioxepan‐2‐thione, produced a soluble polymer through the selective isomerization of thiocarbonyl to a carbonyl group {? [SC(C?O)O(CH₂)₄]_n? }. The molecular weights of the polymer could be controlled by the feed ratio of the monomer to the initiators or the conversion of the monomer during the polymerization, although some termination reactions occurred after the complete consumption of the monomer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1014–1018, 2005     

Pendant cyclic carbonate‐polymer/Na‐smectite nanocomposites via in situ intercalative polymerization and solution intercalation

Nanocomposites of sodium smectite with polyether‐ and polystyrene‐containing pendant cyclic carbonates offer a novel approach to improving hydraulic barrier properties of Na‐smectite liners to saline leachates. The cyclic carbonate polyethers were prepared by cationic ring opening polymerization of a cyclic carbonate‐containing epoxide, whilst polystyrene polymers having pendant cyclic carbonate groups were obtained from radical photopolymerization of styrene. Na‐smectite nanocomposites of these polymers were formed via clay in situ polymerization and solution intercalation methods. X‐ray diffraction (XRD) and FT‐IR analysis confirmed that the polyether can be intercalated within the layers of smectite via in situ as well as solution intercalation of the pre‐formed polymer. The cyclic carbonate polyether nanocomposite was more resistant to leaching in 3M aqueous sodium chloride than its respective cyclic carbonate. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2421–2429     

Hyperbranched polyethers by ring‐opening polymerization: Contribution of activated monomer mechanism

Propagation in the cationic ring‐opening polymerization of cyclic ethers involves nucleophilic attack of oxygen atoms from the monomer molecules on the cationic growing species (oxonium ions). Such a mechanism is known as the active chain‐end mechanism. If hydroxyl groups containing compounds are present in the system, oxygen atoms of HO? groups may compete with cyclic ether oxygen atoms of monomer molecules in reaction with oxonium ions. At the proper conditions, this reaction may dominate, and propagation may proceed by the activated monomer mechanism, that is, by subsequent addition of protonated monomer molecules to HO? terminated macromolecules. Both mechanisms may contribute to the propagation in the cationic polymerization of monomers containing both functions (i.e., cyclic ether group and hydroxyl groups) within the same molecule. In this article, the mechanism of polymerization of three‐ and four‐membered cyclic ethers containing hydroxymethyl substituents is discussed in terms of competition between two possible mechanisms of propagation that governs the structure of the products—branched polyethers containing multiple terminal hydroxymethyl groups. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 457–468, 2003     

New aliphatic poly(ester‐carbonates) based on 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one

The synthesis, characterization, and ring‐opening polymerization of a new cyclic carbonate monomer containing an allyl ester moiety, 5‐methyl‐5‐allyloxycarbonyl‐1,3‐dioxan‐2‐one (MAC), was performed for the first time. MAC was synthesized in five steps in good yield beginning from the starting material, 2,2‐bis(hydroxymethyl)propionic acid. Subsequent polymerization and copolymerizations of the new cyclic carbonate with rac‐lactide (rac‐LA) and ?‐caprolactone (CL) were attempted. Rac‐LA copolymerized well with MAC, but CL copolymerizations produced insoluble products. Oligomeric macroinitiators of MAC and rac‐LA were synthesized from stannous ethoxide, and both macroinitiators were used for the controlled ring‐opening polymerization of rac‐LA. The polymerization kinetics were examined by monitoring the disappearance of the characteristic C? O ring stretch of the monomer at 1240 cm^?1 with real‐time in situ Fourier transform infrared spectroscopy. Postpolymerization oxidation reactions were conducted to epoxidize the unsaturated bonds of the MAC‐functionalized polymers. Epoxide‐containing polymers may allow further organic transformations with various nucleophiles, such as amines, alcohols, and carboxylic acids. NMR was used for microstructure identification of the polymers, and size exclusion chromatography and differential scanning calorimetry were used to characterize the new functionalized poly(ester‐carbonates). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1978–1991, 2003     

Mapping the characteristics of the radical ring‐opening polymerization of a cyclic ketene acetal towards the creation of a functionalized polyester

Radical ring‐opening polymerization of cyclic ketene acetals is a means to achieve novel types of aliphatic polyesters. 2‐methylene‐1,3‐dioxe‐5‐pene is a seven‐membered cyclic ketene acetal containing an unsaturation in the 5‐position in the ring structure. The double bond functionality enables further reactions subsequent to polymerization. The monomer 2‐methylene‐1,3‐dioxe‐5‐pene was synthesized and polymerized in bulk by free radical polymerization at different temperatures, to determine the structure of the products and propose a reaction mechanism. The reaction mechanism is dependent on the reaction temperature. At higher temperatures, ring‐opening takes place to a great extent followed by a new cyclization process to form the stable five‐membered cyclic ester 3‐vinyl‐1,4‐butyrolactone as the main reaction product. Thereby, propagation is suppressed and only small amounts of other oligomeric products are formed. At lower temperatures, the cyclic ester formation is reduced and oligomeric products containing both ring‐opened and ring‐retained repeating units are produced at higher yield. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4587–4601, 2009     

Cationic ring‐opening polymerization behavior of a five‐membered cyclic thiocarbonate having a spiro‐linked adamantane moiety

This work deals with the synthesis and cationic ring‐opening polymerization behavior of a novel five‐membered cyclic thiocarbonate bearing a spiro‐linked adamantane moiety, tricyclo[3.3.1.1^3,7]decane‐2‐spiro‐4′‐(1′,3′‐dioxolane‐2′‐thione) ( TC2 ). The cationic ring‐opening polymerization of TC2 did not proceed with trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, triethyloxonium tetrafluoroborate (Et₃OBF₄), boron trifluoride etherate (BF₃OEt₂), titanium tetrachloride, or methyl iodide as the initiator, presumably because of the steric hindrance of the adamantane moiety. However, the cationic ring‐opening copolymerization of TC2 with five‐ or six‐membered cyclic thiocarbonates, that is, 1,3‐dioxolane‐2‐thione, 1,3‐dioxane‐2‐thione, 5‐methyl‐1,3‐dioxane‐2‐thione, or 5,5‐dimethyl‐1,3‐dioxane‐2‐thione, initiated by BF₃OEt₂ or Et₃OBF₄, proceeded to afford the corresponding copolymer via a selective ring‐opening direction. The increase in the feed ratio of TC2 in the copolymerization increased the unit ratio derived from TC2 in the copolymer; however, the molecular weight of the copolymer decreased. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 699–707, 2003     

Radical ring‐opening polymerization of five‐membered cyclic vinyl sulfone using p‐toluenesulfonyl halides

Radical ring‐opening polymerizations of a five‐membered cyclic vinyl sulfone monomer, 2‐vinylthiolane‐1,1‐dioxide (VTDO), was carried out by using p‐toluenesulfonyl iodide (TosI) and bromide (TosBr) as radical initiators, and the corresponding ring‐opened polymer (PVTDO) was obtained. Both TosI and TosBr were found to work as the radical initiators for the polymerization of VTDO in bulk. The use of TosI gave PVTDOs with a broad, multimodal distribution of molecular weight in low yields. When 10 mol % of TosBr was employed, the isolated yield of PVTDO reached 49%, and the obtained PVTDO had a relatively narrow, monomodal molecular weight distribution of 1.8 with an M_n of 4100. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Living cationic ring‐opening polymerization of five‐membered cyclic dithiocarbonate controlled by neighboring group participation of carbamate group

A five‐membered cyclic dithiocarbonate having phenylcarbamate moiety 1 underwent cationic ring‐opening polymerization by using methyl trifluoromethanesulfonate as an initiator in nitrobenzene at 60 °C. Both of the corresponding first‐order kinetic plot and conversion‐molecular weight plot showed linearity to suggest the living fashion of the polymerization, which was then supported by two‐stage polymerization experiment. The living fashion as well as the regioselective formation of the repeating unit suggested significant contribution of the neighboring group participation of the carbamate group to form a stabilized cationic propagating end, of which structure was confirmed by performing an equimolar reaction of 1 and methyl trifluoromethanesulfonate with analyzing the resulting species by NMR spectroscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4459–4464, 2007     

Controlled cationic ring‐opening polymerization of cyclic thiocarbonates with ester groups

This work deals with the cationic ring‐opening polymerization of the cyclic thiocarbonates 5‐benzoyloxymethyl‐5‐methyl‐1,3‐dioxane‐2‐thione ( 1 ), 5,5‐dimethyl‐1,3‐dioxane‐2‐thione ( 2 ), and 4‐benzoyloxymethyl‐1,3‐dioxane‐2‐thione ( 3 ). The polymerization was carried out with 2 mol % trifluoromethanesulfonic acid, methyl trifluoromethanesulfonate, boron trifluoride etherate, or triethyloxonium tetrafluoroborate as the initiator to afford the polythiocarbonate with a narrow molecular weight distribution accompanying isomerization of the thiocarbonate group. The molecular weight of the obtained polymer could be controlled by the feed ratio of the monomer to the initiator and increased when the second monomer was added to the polymerization mixture after the quantitative consumption of the monomer in the first stage. The block copolymerization of 2 and 3 was also achieved, and this supported the idea that the cationic ring‐opening polymerization of these monomers proceeded via a living process. The order of the polymerization rate was 3 > 2 > 1 . The cationic ring‐opening polymerization of 1 and 3 involved the neighboring group participation of ester groups according to the polymerization rate and molecular orbital calculations with the ab initio method. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 185–195, 2003     

Novel ABC miktoarm star terpolyphosphoesters: Facile construction and high‐flame retardant property

A combination of ring‐opening metathesis polymerization (ROMP), ring‐opening polymerization (ROP), and acyclic diene metathesis (ADMET) polymerization approach was first time utilized in the preparation of novel ABC miktoarm star terpolyphosphoesters (PPEs). Acrylate‐terminated monotelechelic PPE was first prepared through ROMP of 7‐membered cyclic phosphate monomer in the presence of a terminating agent, and then terminal acrylate group was readily converted, by thiol‐Michael addition click reaction and esterification, to a heterodifunctional PPE with hydroxyl and acrylate groups, which was a key precursor for the preparation of ABC miktoarm terpolymers. ROP of the cyclic phosphoester monomer initiated by this PPE was successively carried out to generate the acrylate‐functionalized block PPE, which utilized as a selective macromolecular chain stopper in subsequent ADMET polymerization of α,ω‐diene phosphate monomer, finally producing miktoarm terpolyphosphoester. These prepared miktoarm star terpolyphosphoesters demonstrated superior thermal and flame retardant properties via TGA, limiting oxygen index, and microscale combustion calorimetry tests. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 692–701     

Allyl ethers as combined plasticizing and crosslinkable side groups in polycarbonate‐based polymer electrolytes for solid‐state Li batteries

Allyl ether‐functional polycarbonates, synthesized by organocatalytic ring‐opening polymerization of the six‐membered cyclic carbonate monomer 2‐allyloxymethyl‐2‐ethyltrimethylene carbonate, were used to prepare non‐polyether polymer electrolytes. UV‐crosslinking of the allyl side groups provided mechanically stable electrolytes with improved molecular flexibility—T_g below ?20 °C—and higher ionic conductivity—up to 4.3 × 10^?7 S/cm at 25 °C and 5.2 × 10^?6 S/cm at 60 °C—due to the plasticizing properties of the allyl ether side groups. The electrolyte function was additionally demonstrated in thin‐film Li battery cells. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2128–2135     

Hybrid free radical/cationic frontal photopolymerizations

The irradiation of hybrid photopolymer systems consisting of a free radically polymerizable multifunctional acrylate monomer and a cationically polymerizable epoxide or oxetane monomer was conducted under conditions where only the free radical polymerization takes place. This results in the formation of a free‐standing polyacrylate network film containing quiescent oxonium ions along with the unreacted cyclic ether monomer. The subsequent application of a point source of heat to the film ignites a cationic ring‐opening frontal polymerization that emanates from that site and propagates to all portions of the irradiated sample. This article examines the impact of various molecular structural and experimental parameters on these novel hybrid frontal polymerizations that produce interpenetrating network polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4331–4340, 2007     

Synthesis of polycarbosilanes having a five‐membered cyclic carbonate structure and their application to prepare gel polymer electrolytes for lithium ion batteries

A silacyclobutane having a five‐membered cyclic carbonate structure (SBMC) was prepared, and its transition metal‐catalyzed ring‐opening polymerization at the four‐membered carbosilane unit was investigated as well as formation of carbosilane networked polymers and polymer gel electrolytes. The SBMC was synthesized by epoxidation of 1‐(4‐butenyl)‐1‐methylsilacyclobutane followed by insertion of CO₂ to the epoxide. Ring‐opening polymerization of the silacyclobutane moiety in the SBMC readily proceeded by a transition metal catalyst such as platinum divinyltetramethyldisiloxane complex. A flexible networked polymer film was obtained by copolymerization of the SBMC with a small amount of crosslinker, hexamethylene‐1,6‐bis(1‐methylsilacyclobutane) (HMBS). The copolymerization of SBMC and HMBS in 1 M LiPF₆ solution in ethylene carbonate and diethyl carbonate (3/7 v/v) gave a gel polymer electrolyte, which showed good ionic conductivity and could be applied to lithium ion batteries. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Expected and unexpected reactions in ring‐opening (co)polymerization

This review covers most of the authors' work on ring‐opening polymerization and copolymerization of heterocyclic monomers during the time of their cooperation since 1985. The mechanistic aspects of anionic ring opening polymerization of cyclic carbonates with a variety of functional groups are described first. By sequential polymerization of first styrene, methyl methacrylate or suitable heterocyclic monomers and then secondly a cyclic carbonate, the site transformation is highlighted. The influence of the chemical nature of macroinitiators with identical active sites on the course of polymerization of cyclic carbonates was studied for poly(ethylene oxide), poly(tetrahydrofuran), and poly(dimethylsiloxane) macroinitiators. For the copolymerization of cyclic carbonates with lactones and lactide the dependence of the polymer microstructure on the polymerization conditions is discussed on the basis of the copolymerization mechanism. The copolymerization of cyclic carbonates with ε‐caprolactam and with tetramethylene urea results in an alternating copolymer, i. e. a poly(ester urethane) and an [m, n]‐polyurethane, respectively, the key step being the insertion of the lactam or the cyclic urea into the carbonate chain. The cationic ring opening polymerization of cyclic six and seven membered carbamates leading to [4]‐ and [5]‐polyurethane with uniform microstructure is reported with respect to kinetic, mechanistic, and thermodynamic aspects. This new access to [n]‐polyurethanes by a chain growth reaction allows the synthesis of well defined polymer architectures with polyurethane sequences. Sequential polymerization of tetrahydrofuran and the cyclic carbamate with mono‐ and bifunctional initiators leads to the respective A–B and B–A–B block copolymers. Site transformation from the oxonium to the immonium active species is the key step in the polymerization mechanism. Finally, mechanistic aspects of the ring‐opening polymerization of cyclic ester‐amides are presented.     

Mild incorporation of CO2 into epoxides: Application to nonisocyanate synthesis of poly(hydroxyurethane) containing triazole segment by polyaddition of novel bifunctional five‐membered cyclic carbonate and diamines

The cyclic amidinium iodide effectively catalyzed the ring‐expansion addition of epoxides with carbon dioxide under ordinary pressure and mild conditions to obtain the corresponding five‐membered cyclic carbonates in high yield. The novel triazole‐linked bifunctional five‐membered cyclic carbonate was synthesized successfully by the click reaction of the azide‐ and the alkyne‐substituted five‐membered cyclic carbonates under ambient temperature in high yield. The chemical structure of the novel bis(cyclic carbonate) was characterized by one‐ and two‐dimensional nuclear magnetic resonance spectra. The obtained bis(cyclic carbonate) was converted with commercially available diamines to poly(hydroxyurethane) containing triazole segment without catalyst in high yield. Analyses of the resulting poly(hydroxyurethane)s were performed by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 986–993     

Free radical ring‐opening polymerization of cyclic allylic sulfides: Liquid monomers with low polymerization volume shrinkage

The free radical polymerization of four methylated cyclic allylic sulfides was examined with reference to their polymerization volume shrinkage and the effect of ring size on reactivity. The compounds examined were 2‐methyl‐5‐methylene‐1,3‐dithiane ( 5 ) (solid), 2‐methyl‐6‐methylene‐1,4‐dithiepane ( 6 ) (liquid), 6‐methyl‐3‐methylene‐1,5‐dithiacyclooctane ( 7 ) (liquid), and 6,8‐dimethyl‐3‐methylene‐1,5‐dithiacyclooctane ( 8 ) (liquid). The monomers were stable materials not requiring any special handling or storage conditions. They were polymerized in bulk using thermal azobisisobutyronitrile (AIBN, VAZO88) and photochemical initiators (Ciba DAROCUR 1173) and in benzene solutions (AIBN, 70 °C). The six‐membered ring monomer 5 was unreactive whereas seven‐membered ring monomer 6 polymerized to high conversion in bulk. In addition, 6 did not polymerize in benzene solution at 70 °C at [ 6 ] = 1.25M. Eight‐membered ring monomers 7 and 8 polymerized in bulk to complete conversion with thermal and photochemical initiators to give lightly crosslinked materials. Near complete conversion to soluble polymers could be obtained in solution polymerizations in benzene. Soluble polymers were also obtained in photochemical initiated bulk polymerizations by lowering initiator concentrations or length of irradiation. The methyl substituent had no effect on which allylic carbon–sulfur bond fragmented in the ring‐opening step. The polymerization volume shrinkages of monomers 7 and 8 were 1.5 and 2.4% respectively and together with monomer 4 (1.5–2.0% shrinkage) are the best available liquid free radical ring‐opening monomers that can be polymerized in bulk at room temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 202–215, 2001     

Enzyme‐catalyzed ring‐opening polymerization of 3(S)‐isopropylmorpholine‐2,5‐dione

The enzymatic ring‐opening polymerization of a 6‐membered cyclic depsipeptide, 3(S)‐isopropylmorpholine‐2,5‐dione in the bulk, was investigated by using lipases as catalysts at 100 and 130°C. Unchanged monomer was recovered in the absence of the enzyme or using an inactivated enzyme, indicating that the present polymerization proceeds through enzymatic catalysis. Poly(3‐isopropylmorpholine‐2,5‐dione) has a carboxylic acid group at one end and a hydroxy group at the other end.     

Anionic ring‐opening polymerization of a five‐membered cyclic urethane derived from d‐glucosamine

The anionic ring‐opening polymerization of a five‐membered cyclic urethane, 2‐amino‐4,6‐O‐benzylidene‐2‐N,3‐O‐carbonyl‐2‐deoxy‐α,d ‐glucopyranoside (MBUG), which was prepared from naturally abundant d ‐glucosamine, was examined. Potassium tert‐butoxide (t‐BuOK) was the most effective initiator among the evaluated bases and produced polyurethane with the Mn of 7800 without any elimination of CO₂. The equimolar reaction of MBUG and t‐BuOK in the presence of CH₃I produced N‐methylated MBUG and suggested that the initiation reaction involves proton abstraction from the NH group. This N‐methylated compound did not undergo the polymerization. Therefore, the mechanism of propagation in the ROP of MBUG should involve the proton abstraction and nucleophilic substitution of the resulting amide anion. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2491–2497     

Oxetane‐terminated telechelic epoxy‐functional polyesters as cationically polymerizable thermoset resins: Tuning the reactivity with structural design

A series of epoxy‐functional telechelic oligomers containing oxetane end groups have been synthesized. The precursor monomer, extracted from outer Birch bark, was first polymerized through enzyme‐catalyzed esterification to form oligomers having epoxy and/or oxetane groups in the structures. The oligoesters were subsequently crosslinked through cationic polymerization either by epoxy or oxetane homopolymerization or copolymerization when both functionalities were present. A study of the polymerizations of the resins was performed “in situ” using real‐time Fourier transform infrared spectroscopy revealing a preferred copolymerization when compared with the homopolymerization. By tailoring the different structures, it was possible to control the final mechanical properties of the networks. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2258–2266     

Reactivity comparison of five‐ and six‐membered cyclic carbonates with amines: Basic evaluation for synthesis of poly(hydroxyurethane)

The reaction of six‐ and five‐membered cyclic carbonates, 5‐(2‐propenyl)‐1,3‐dioxan‐2‐one ( 1 ) and 4‐(3‐butenyl)‐1,3‐dioxolan‐2‐one ( 2 ) with hexylamine and benzylamine was carried out in N,N‐dimethylacetamide at 30, 50, and 70 °C. The six‐membered cyclic carbonate 1 proceeded quantitatively with hexylamine at 30 °C for 24 h, while the five‐membered cyclic carbonate 2 converted in 34%. The reaction rate constants at 50 °C are evaluated as follows; 1.42 L/mol · h ( 1 with hexylamine) > 0.29 L/mol · h ( 1 with benzylamine) > 0.04 L/mol · h ( 2 with hexylamine) > 0.01 L/mol · h ( 2 with benzylamine). The activation energies in the reactions of 1 and 2 with hexylamine were estimated to be 10.1 and 24.6 kJ/mol, respectively. The ring‐strain energy was calculated by the semi‐empirical method using the PM3 Hamiltonian. The ring‐strain energy of the six‐membered cyclic carbonate was 2.86 kcal/mol larger than that of five‐membered one. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 162–168, 2001