Chiral recognition and separation of beta2-amino acids using non-covalently molecularly imprinted polymers

Non-covalently molecularly imprinted polymers (MIPs) for beta2-amino acids were prepared for the first time. N-(2-chlorobenzyloxycarbonyl)-(R)-beta2-homophenylalanine (N-2-ClZ-(R)-beta2-HPhe) was imprinted with methacrylic acid (MAA) and/or 4-vinylpyridine (4-VPy) as the functional monomers, with ethylene glycol dimethacrylate (EDMA) as the cross-linker. The MIPs made with different ratios of MAA:4-VPy were studied in HPLC mode. The results show that MIPs made with 4-VPy yielded the best chiral separation factor (alpha= 1.86) for the template molecule. The importance for an efficient separation of pi-stacking interactions between the MIPs and the template molecule is demonstrated. Racemates of Z-alpha-amino acids and beta-amino acid analogues of the template were either not or poorly resolved by the MIPs, thus demonstrating the close three-dimensional complementarity of the MIPs' recognition sites with the template.     

微波聚合快速制备分子印迹毛细管电色谱整体柱

以甲基丙烯酸为功能单体、己二醇二甲基丙烯酸酯为交联剂、 对羟基苯甲酸为模板分子, 采用微波辐射聚合的方式快速制备了分子印迹毛细管电色谱整体柱, 并取得了较好的印迹效果. 分子印迹材料的原位制备5 min即可完成, 大大快于国内外传统的方法.     

Investigation of enantiomer recognition of molecularly imprinted polymeric monoliths in pressurized capillary electrochromatography screening the amino acids and their derivatives

Molecularly imprinted monolithic columns were prepared for chiral separation of tyrosine and its amino acid derivatives by in situ therm-initiated copolymerization of methacrylic acid, 4-vinylpyridine and ethylene glycol dimethacrylate. The enantiomers were rapidly separated on monolithic columns in less than 10 min by pressurized capillary electrochromatography (pCEC). The influences of several parameters such as the content of cross-linking monomer on the composition of the pre-polymerization mixture were systematically investigated. The influence of the pCEC conditions including the composition of the mobile phase was also optimized to obtain the good enantioseparation. It was found that in addition to molecularly imprinted recognition, chromatographic retention and electrophoretic migration play important roles in the retention and chiral recognition of molecularly imprinted polymer (MIP) columns. The cross-selectivity for similar amino acids and its derivatives were systematical investigated for understanding the recognition mechanism on the MIP monolithic columns. The results indicated that molecularly imprinted polymer recognizes the template molecule by its molecular shape defined binding cavity.     

Examination of Template Structural Effects on CEC Chiral Separation Performance of Molecule Imprinted Polymers Made by a Generalized Preparation Protocol

Some acidic chiral templates were used to prepare open tubular (OT) molecule imprinted polymer (MIP) capillary columns to explore the effects of molecular structures of templates on chiral recognition capabilities and to verify the feasibility of the general MIP preparation protocol introduced in the previous study. The templates are phenyl carboxylic acids and their derivatives. Optimization was carried out for chiral separation of template enantiomers for each MIP column through varying pH and composition of eluent. It was found that the preparation protocol can be successfully applied for the appropriate templates with functional groups fulfilling the three-points interaction rule. The chiral separation performances were quite satisfactory for MIPs of such templates although they are yet inferior to the separation performances of the MIP columns fabricated with the templates of profen drugs (2-arylpropionic acids with a large substituent on the phenyl ring). Subtle variations of the template molecular structures have been found to be critical to enhance chiral recognition ability of the resultant MIP column.     

Study on the mechanism of chiral recognition with molecularly imprinted polymers

This study aimed at elucidating the chiral recognition mechanism with molecularly imprinted polymers (MIPs) in aqueous environment. The system used ethylene glycol dimethacrylate (EGDMA), methacrylic acid (MAA), and 4-l-phenylalanylamino-pyridine (4-l-PheNHPy) as the cross-linking monomer, functional monomer and template, respectively, to assemble the imprinted polymer. A self-assembly mechanism, which includes the pre-organizing functional monomers around template before polymerization process, was proposed. This mechanism was supported by NMR titration test. Interactions between functional monomer and template were observed using UV-Vis spectroscopy of solutions of these components as well. These studies indicated a 1:2 molecular complex dominantly formed between 4-l-PheNHPy and MAA. Association constant was estimated to be 97,000 M⁻². Based on these results, a model mainly involving two-spot interaction was proposed evolving from our reported concept of exact placement of functional group. Ionic interaction between the primary amino group of 4-l-PheNHPy and carboxylic acid group inside the microcavity on MIPs was believed to play a predominate role in the enantioselectivity as supported by the observation of the relationship between the retention factor of 4-l-PheNHPy and the pH of mobile phase. While thermodynamic study at different pH revealed that, the interaction between the pyridyl group of 4-l-PheNHPy and the carboxylic acid group on the MIPs is also strong, implying that it also plays a profound role in determining the highly chiral selectivity of MIPs.     

Development and characterisation of a molecularly imprinted polymer prepared by precipitation polymerisation for the determination of phenylurea herbicides

New materials based on molecularly imprinted polymers (MIPs) have been developed for use as sorbents in solid phase extraction to preconcentrate some urea herbicides. In the preconcentration step, different molecularly imprinted polymers were tested using methacrylic acid (MAA) and 2-(trifluoromethyl)acrylic acid (TFMAA) as functional monomers, and linuron and isoproturon as templates. The best results were obtained when the polymer was synthesised using MAA with isoproturon as template. Another parameter evaluated was the way in which the polymer was obtained. We observed that the imprinted polymers obtained by precipitation displayed a greater capacity to retain the phenylureas. Studies conducted using scanning electron microscopy (SEM) revealed that the bulk polymerisation method is far from ideal owing to the random shape and size distribution of the particles obtained, whereas when polymerisation was carried out in precipitation microspheres were obtained. In order to confirm the interaction between the functional monomer and the template, 1H NMR (CD2Cl2) analyses were conducted. The results obtained suggest that the hydrogen and/or nitrogen of the amino group of the template would be involved in the formation of hydrogen bonds with the functional monomer. The imprinted polymer obtained by precipitation polymerisation with MAA as functional monomer and isoproturon as template can be applied to preconcentrate phenylureas when the sample is dissolved in toluene. The proposed methodology was employed to evaluate polymer selectivity towards humic acids and towards other herbicides.     

Chiral separation of racemic mandelic acids by use of an ionic liquid-mediated imprinted monolith with a metal ion as self-assembly pivot

A new chiral stationary phase based on molecularly imprinted polymers (MIP) was prepared in ionic liquid by use of the metal pivot concept. Imprinted monoliths were synthesized by use of a mixture of R-mandelic acid (template), 4-vinylpyridine, ethylene glycol dimethacrylate, and several metal ions as pivot between the template and functional monomer. A ternary mixture of dimethyl sulfoxide–dimethylformamide–[BMIM]BF₄ containing metal ions was used as the porogenic system. Separation of the enantiomers of rac-mandelic acid was successfully achieved on the MIP thus obtained, with resolution of 1.87, whereas no enantiomer separation was observed on the imprinted monolithic column in the absence of metal ions. The effects of polymerization conditions, including the nature of the metal ion and the ratios of template to metal ions and template to functional monomer, on the chiral separation of mandelic acid were investigated. The results reveal that use of metal ions as a pivot, in combination with ionic liquid, is an effective method for preparation of a highly efficient MIP stationary phase for chiral separation.

多壁碳纳米管表面对硝基苯酚印迹复合材料的制备与吸附性能

以多壁碳纳米管表面接枝的L-苯丙氨酸为结合位点, 甲基丙烯酸为功能单体, 乙二醇二甲基丙烯酸酯为交联剂, 采用沉淀聚合技术, 在碳纳米管表面制备了对硝基苯酚印迹复合材料. 采用红外光谱和扫描电镜研究了该印迹复合材料的结构和形貌, 结果表明, 在碳纳米管表面接枝了一层稳定的印迹材料. 采用高效液相色谱研究了该印迹材料的等温吸附性能, 结果表明, 该印迹材料对模板分子具有较大的吸附容量(Qmax=80.5 μmol/g)和良好的选择吸附性能(选择因子达2.5). 以该印迹材料作为固相萃取吸附剂, 研究了它对对硝基苯酚和其它结构类似物混合溶液的动态吸附性能, 结果表明, 印迹复合材料对对硝基苯酚的吸附容量不受结构类似物浓度的影响, 能较好地应用于对硝基苯酚的分离富集检测.     

Preparation and evaluation of a macroporous molecularly imprinted hybrid silica monolithic column for recognition of proteins by high performance liquid chromatography

A novel type of macroporous molecularly imprinted hybrid silica monolithic column was first developed for recognition of proteins. The macroporous silica-based monolithic skeleton was synthesized in a 4.6 mm i.d. stainless steel column by a mild sol–gel process with methyltrimethoxysilane (MTMS) as a sole precursor, and then vinyl groups were introduced onto the surface of the silica skeleton by chemical modification of γ-methacryloxypropyltrimethoxysilane (γ-MAPS). Subsequently, the molecularly imprinted polymer (MIP) coating was copolymerized and anchored onto the surface of the silica monolith. Bovine serum albumin (BSA) and lysozyme (Lyz), which differ greatly in molecular size, isoelectric point, and charge, were representatively selected for imprinted templates to evaluate recognition property of the hybrid silica-based MIP monolith. Some important factors, such as template–monomer molar ratio, total monomer concentration and crosslinking density, were systematically investigated. Under the optimum conditions, the obtained hybrid silica-based MIP monolith showed higher binding affinity for template than its corresponding non-imprinted (NIP) monolith. The imprinted factor (IF) for BSA and Lyz reached 9.07 and 6.52, respectively. Moreover, the hybrid silica-based MIP monolith displayed favorable binding characteristics for template over competitive protein. Compared with the imprinted silica beads for stationary phase and in situ organic polymer-based hydrogel MIP monolith, the hybrid silica MIP monolith exhibited higher recognition, stability and lifetime.     

L-卡尼丁分子压印聚合物作为手性分离色谱固定相的研究

以L－卡尼丁为模板分子，分别以α－甲基丙烯酸和丙烯酰胺为功能单体，乙二醇二甲基丙烯酸酯为 剂，采用分子压印技术合成了对L－卡尼丁具有高选择性的分子压印聚合物。将所得聚合物用作高效液相色谱固定相，研究了它们对外消旋卡尼丁盐酸盐的拆分能力，分析结果表明，α－甲基丙烯酸作为功能单体所得聚合物对外消旋卡尼丁盐酸盐具有良好的拆分作用，其分离因子α为1．89。     

Preparation and characterization of macroporous monoliths imprinted with erythromycin

The synthesis of macroporous molecularly imprinted monoliths was performed using the monomers system 2‐hydroxyethyl methacrylate‐ethylene glycol dimethacrylate and erythromycin as a template. The copolymerization was carried out in situ inside 50 mm × 4.6 mm i.d. stainless‐steel tubing. The morphology of the monoliths was examined with scanning electron microscopy. The porous characteristics were determined both from the data of hydrodynamic permeability of monoliths and by means of mercury intrusion porosimetry. The retention parameters of target substance (erythromycin), values of calculated imprinting factors and apparent dynamic dissociation constants were obtained for monoliths prepared with the application of different amount of template (4, 8 and 12 mol%). The separations of the mixtures azithromycin/erythromycin and ciprofloxacin/erythromycin were demonstrated. Additionally, the possibility of erythromycin quantification in human blood plasma was shown.     

Open tubular layer of S‐ofloxacin imprinted polymer fabricated in silica capillary for chiral CEC separation

An open tubular molecule imprinted polymer (OT‐MIP) capillary column has been prepared for chiral separation of ofloxacin enantiomers in CEC. The S‐ofloxacin imprinted OT column was fabricated by thermally initiated non‐covalent polymerization procedure inside a pretreated and silanized fused silica capillary. The template molecule was incorporated with methacrylic acid (MAA), ethylene glycol dimethacrylate (EDMA) and 4‐styrenesulfonic acid (4‐SSA) and dissolved in a porogen mixture of ACN/2‐propanol (9:1). The separation efficiency of the 4‐SSA MIP column was found quite better than that of the MIP column without 4‐SSA. It has been demonstrated that our OT‐MIP column can separate ofloxacin enantiomers with excellent chiral separation efficiency after tuning the various chromatographic conditions. The optimized chromatographic eluent was 85:15, v/v%, ACN/60 mM sodium acetate at pH 7. The separation efficiency and selectivity of chiral separation of this study were far better than those obtained by previous methods for chiral separation of R‐ and S‐ofloxacin.     

以混旋邻氯扁桃酸为模板的分子印迹聚合物的制备及拆分性能研究

以混旋邻氯扁桃酸为模板分子和合成的(S)-(1-萘乙基)-丙烯酰胺为手性功能 单体制备分子印迹聚合物作为色谱固定相，对混旋邻氯扁桃酸有较好的拆分能力， 分离因子α达到1.36。但对模板分子的类似物混旋扁桃酸和对氯扁桃酸没有拆分能 力。用Hyperchem软件模拟了(S)-邻氯扁桃酸与(S)-(1-萘乙基)-丙烯酰胺形成的复 合物的结构模型，其在聚合物母体中留下的具有立体构型和作用力双重识别的S-S 型空穴，对(S)-邻氯扁桃酸有较强的保留作用，从而达到对混旋物拆分的目的。     

三甲氧基苄啶分子印迹整体柱的制备及色谱性能

选择甲基丙烯酸为功能单体\, 甲基丙烯酸乙二醇双酯为交联剂, 制备了三甲氧基苄啶分子印迹整体柱, 对整体柱材料的形貌进行了表征, 并且研究了TMP和5种磺胺类药物在分子印迹整体柱上的色谱行为.     

原位聚合那格列奈分子印迹手性固定相的分子识别特性研究

以手性药物那格列奈为模板分子,采用原位聚合法制备了具有特定识别性能和手性拆分能力的分子印迹聚合物,并用作高效液相色谱固定相实现了那格列奈与其对映体的手性拆分．通过静态结合方法考察了该聚合物的选择结合能力,并讨论了手性分离过程中的热力学性质．结果表明,原位聚合法制备的棒状聚合物固定相对模板分子及其对映体有很好的手性拆分性能．     

碳纳米管表面绿原酸印迹固相萃取材料的制备及应用

在多壁碳纳米管表面接枝的双键键合,以绿原酸为模板,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用沉淀聚合技术,在碳纳米管表面成功制备绿原酸印迹材料.采用红外光谱、扫描电镜和热重分析研究此印迹材料的性能.结果表明,在碳纳米管表面接枝一层稳定、均匀、30～40 nm厚的印迹材料.采用高效液相色谱研究此印迹材料的吸附动力学及吸附容量,实验结果表明,此印迹材料对绿原酸的结合存在两个结合位点,最大吸附容量Qmax分别为21.5和32.7 μmol/g.以此印迹材料作为固相萃取剂,优化萃取条件,成功应用于金银花提取液中绿原酸的富集分离研究,富集因子达25.     

Separation of chiral compounds using magnetic molecularly imprinted polymer nanoparticles as stationary phase by microchip capillary electrochromatography

In this work, a simple and rapid approach was developed for separation and detection of chiral compounds based on a magnetic molecularly imprinted polymer modified poly(dimethylsiloxane) (PDMS) microchip coupled with electrochemical detection. Molecularly imprinted polymers were prepared employing Fe₃O₄ nanoparticles (NPs) as the supporting substrate and norepinephrine as the functional monomer in the presence of template molecule in a weak alkaline solution. After extracting the embedded template molecules, Fe₃O₄@polynorepinephrine NPs (MIP–Fe₃O₄@PNE NPs) showed specific molecular recognition selectivity and high affinity towards the template molecule, which were then used as stationary phase of microchip capillary electrochromatography for chiral compounds separation. Mandelic acid and histidine enantiomers were used as model compounds to test the chiral stationary phase. By using R‐mandelic acid as the template molecule, mandelic acid enantiomer was effectively separated and detected on the MIP‐Fe₃O₄@PNE NPs modified PDMS microchip. Moreover, the successful separation of histidine enantiomers on the MIP–Fe₃O₄@PNE NPs modified microchip using L‐histidine as template molecule was also achieved.     

Molecularly imprinted poly (methacrylamide-co-methacrylic acid) composite membranes for recognition of curcumin

In this study, molecularly imprinted poly (methacrylamide-co-methacrylic acid) composite membranes with different ratio of methacrylamide (MAM) versus methacrylic acid (MAA) were prepared via UV initiated photo-copolymerization on the commercial filter paper. Curcumin was chosen as the template molecule. Infra-red (IR) spectroscopy was used to study the binding mechanism between the imprinted sites and the templates. The morphology of the resultant membranes was visualized by scanning electron microscopy (SEM). Static equilibrium binding and recognition properties of the imprinted composite membranes to curcumin (cur-I) and its analogues demethoxycurcumin (cur-II) or bisdemethoxycurcumin (cur-III) were tested. The results showed that curcumin-imprinted membranes had the best recognition ability to curcumin compared to its analogues. From the results, the biggest selectivity factor of α_cur-I/cur-II and α_{cur-I/cur-III} were 1.50 and 5.94, and they were obtained from the composite membranes in which MAM/MAA were 1:4 and 0:1, respectively. The results of this study implied that the molecularly imprinted composite membranes could be used as separation membranes for curcumin enrichment.     

鹅去氧胆酸分子印迹聚合物微球的制备及选择性分子识别

以鹅去氧胆酸(CDCA)为印迹分子, 甲基丙烯酸为功能单体, 丙烯酸乙二醇二甲基酯和三羟甲基丙烷三甲基丙烯酸酯为交联剂, 在氯仿中采用沉淀聚合法制得平均粒径为200~300 nm的分子印迹聚合物微球(MIPMS). 用红外光谱研究了印迹分子与功能单体之间的作用类型, 用透射电镜对聚合物的形貌进行了表征. 结果表明, 聚合物微球在合成过程中形成了两类结合位点, 该分子印迹聚合物对CDCA具有良好的特异吸附性能, 可用于胆汁酸的分离、纯化, 交联剂的种类可以影响分子印迹聚合物的形貌和吸附性能.     

Selective adsorption of D- and L-phenylalanine on molecularly-imprinted polymerized organogels formed using polymerizable gelator N-octadecyl maleamic acid

The polymerizable gelator N-octadecyl maleamic acid (ODMA) can self-assemble in selected polymerizable organic solvents, such as 2-hydroxyethyl methacrylate (HEMA) and methylacrylic acid (MAA) to form thermally stable polymerizable organogels. A mixture consisting of HEMA and MAA as the monomer and functional monomer, PEG dimethacrylates (PEG200DMA) as the crosslinker, BOC-L-phenylalanine (BPA) or L-phenylalanine ethyl ester (PEE) as the chiral templates, was gelatinized by ODMA firstly and subsequently polymerized by in situ UV irradiation or thermal initiation. The molecularly imprinted polymerized organogels were obtained after the removal of the templates through ethanol extraction. Selective adsorption of D- and L-phenylalanine was performed on the polymerized organogels. The results indicate rather high adsorption efficiency obtained for L-phenylalanine compared with that for D-phenylalanine, which was found to be dependent on the concentrations of ODMA, content of template, and the method of polymerization. Herein, the concentration of ODMA in the organogels played an important role for the adsorption efficiency of D- and L-phenylalanine.