Chiral separation of racemic mandelic acids by use of an ionic liquid-mediated imprinted monolith with a metal ion as self-assembly pivot

A new chiral stationary phase based on molecularly imprinted polymers (MIP) was prepared in ionic liquid by use of the metal pivot concept. Imprinted monoliths were synthesized by use of a mixture of R-mandelic acid (template), 4-vinylpyridine, ethylene glycol dimethacrylate, and several metal ions as pivot between the template and functional monomer. A ternary mixture of dimethyl sulfoxide–dimethylformamide–[BMIM]BF₄ containing metal ions was used as the porogenic system. Separation of the enantiomers of rac-mandelic acid was successfully achieved on the MIP thus obtained, with resolution of 1.87, whereas no enantiomer separation was observed on the imprinted monolithic column in the absence of metal ions. The effects of polymerization conditions, including the nature of the metal ion and the ratios of template to metal ions and template to functional monomer, on the chiral separation of mandelic acid were investigated. The results reveal that use of metal ions as a pivot, in combination with ionic liquid, is an effective method for preparation of a highly efficient MIP stationary phase for chiral separation.

Chromatographic Separation of the Enantiomers of a Series of C2-Asymmetric Bi-Naphthyl Compounds by Molecularly Imprinted Polymers

The aim of this study was to observe the chiral separation of a series of C₂-asymmetric bi-naphthyl compounds on molecularly imprinted polymers (MIPs) using 1,1′-bi-2-naphthol (BINOL) as template. MIP prepared using 4-vinylpyridine as the functional monomer showed better chiral recognition for the template than the MIPs prepared using acrylamide, 2-(diethylamino)ethylmethacrylate and 2-vinylpyridine, respectively. ¹H-NMR was used for comparison of the interactions between template and functional monomers. For chromatographic analysis the effects of mobile phase and temperature on the chiral separation were investigated. When 4-vinylpyridine was employed as the functional monomer, chiral separation of 1,1′-bi-2-naphthol and its analogues were studied. The MIP also demonstrated an ability to discriminate between enantiomers of structurally related compounds that had not been imprinted. The thermodynamic parameters of interactions between substrates and MIP in acetonitrile based mobile phase were investigated by the Van’t Hoff equation. In this study, the specific hydrogen-bonding interactions seemed to be the key factor to achieve chiral separation.     

Preparation of open tubular molecule imprinted polymer capillary columns with various templates by a generalized procedure and their chiral and non‐chiral separation performance in CEC

A generalized preparation procedure of open tubular (OT) molecule imprinted polymer (MIP) columns is proposed for a number of templates with acidic functionality such as profen drugs and others. The template (S‐enantiomer) was mixed with methacrylic acid, ethylene glycol dimethacrylate and 4‐styrenesulfonic acid, dissolved in a porogen mixture of ACN/2‐propanol (9/1), and incubated in a pretreated and silanized fused silica capillary by the thermal non‐covalent polymerization procedure. The whole preparation procedure was exactly the same for all the MIP capillaries except for the selection of template. Nevertheless, the morphologies of the MIP layers were markedly variant depending upon the choice of template. The separation efficiency of each OT‐MIP column for chiral separation of R‐ and S‐enantiomers was examined and tuned to obtain the best separation efficiency by changing the chromatographic parameters such as eluent composition and pH. Different optimized conditions were obtained for different OT‐MIP columns. Nevertheless, a unified eluent could be used to obtain still quite satisfactory results. Non‐chiral separation of the MIP columns were also examined in the unified eluent with two sets of test mixtures, that is, a mixture of alkylbenzenes and a mixture of small polar solutes. The chiral and non‐chiral separation of this study resulted in very good separation efficiencies. This work is the very first study for the generalization of preparation of OT‐MIP columns for a number of templates.     

A molecularly imprinted monolith for the fast chiral separation of antiparasitic drugs by pressurized CEC

Molecularly imprinted polymer (MIP) monoliths with (S)‐ornidazole ((S)‐ONZ) as the template molecule have been designed and prepared by the simple thermal polymerization of methacrylic acid, 4‐vinylpyridine, and ethylene dimethacrylate in the presence of a binary porogenic mixture of toluene and dodecanol. The influences of polymerization mixture composition on the chiral recognition of ONZ have been evaluated, and the imprint effect in the optimized MIP monolith has been clearly demonstrated. The new monolithic stationary phase with optimized porous property and good selectivity was used for the chiral separation of ONZ by pressurized CEC. The pressurized CEC conditions were also optimized to obtain the good chiral separation. The enantiomers were rapidly separated within 9 min on the MIP‐based chiral stationary phase, whereas the chiral separation was not obtained on the nonimprinted polymer. Additionally, the proposed method has been successfully applied to the chiral separation of ONZ in tablet samples by injection of the crude sample. The cross‐selectivity for similar antiparasitic drug was investigated. The results indicated that the chiral separation of secnidazole could also be obtained on the optimized MIP monolith within 14 min.     

Selective Solid‐phase Extraction of Bisphenol A Using a Novel Stir Bar Based on Molecularly Imprinted Monolithic Material

In this paper, a novel monolithic stir bar based on molecularly imprinted polymer (MIP) was firstly developed by filling modified neodymium magnet (Nd₂Fe₁₄B) powders into a glass tube (60 × 4 mm), followed by the imprinted grafting with bisphenol A (BPA) as the template molecule by thermal polymerization. It has been successfully used for the stir bar sorptive extraction (SBSE) and its extraction performance illustrated that the MIP‐encapsulated stir bar had stronger affinity to the template molecule, compared with the stir bar based on the non‐imprinted molecularly polymer (NIP). Under the optimal extraction conditions, a simple method based on the coupling of MIP‐SBSE with high performance liquid chromatography (HPLC) was used for the selective determination of the model mixtures of BPA, 4‐phenylphenol (PP) and phenol (P) in bottled water. The recoveries of BPA, PP and P were in the range of 88.5‐96.1%, 78.2‐89.7%, 81.3‐89.5% at three spiked levels, respectively, demonstrating that higher extraction and the specific absorption occurred between the template molecule and the prepared MIP stir bar.     

The Synthesis of Magnetic Lysozyme‐Imprinted Polymers by Means of Distillation–Precipitation Polymerization for Selective Protein Enrichment

A protein imprinting approach for the synthesis of core–shell structure nanoparticles with a magnetic core and molecularly imprinted polymer (MIP) shell was developed using a simple distillation–precipitation polymerization method. In this work, Fe₃O₄ magnetic nanoparticles were first synthesized through a solvothermal method and then were conveniently surface‐modified with 3‐(methacryloyloxy)propyltrimethoxylsilane as anchor molecules to donate vinyl groups. Next a high‐density MIP shell was coated onto the surface of the magnetic nanoparticles by the copolymerization of functional monomer acrylamide (AAm), cross‐linking agent N,N′‐methylenebisacrylamide (MBA), the initiator azodiisobutyronitrile (AIBN), and protein in acetonitrile heated at reflux. The morphology, adsorption, and recognition properties of the magnetic molecularly imprinted nanoparticles were investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and rebinding experiments. The resulting MIP showed a high adsorption capacity (104.8 mg g^?1) and specific recognition (imprinting factor=7.6) to lysozyme (Lyz). The as‐prepared Fe₃O₄@Lyz‐MIP nanoparticles with a mean diameter of 320 nm were coated with an MIP shell that was 20 nm thick, which enabled Fe₃O₄@Lyz‐MIP to easily reach adsorption equilibrium. The high magnetization saturation (40.35 emu g^?1) endows the materials with the convenience of magnetic separation under an external magnetic field and allows them to be subsequently reused. Furthermore, Fe₃O₄@Lyz‐MIP could selectively extract a target protein from real egg‐white samples under an external magnetic field.     

Open tubular layer of S‐ofloxacin imprinted polymer fabricated in silica capillary for chiral CEC separation

An open tubular molecule imprinted polymer (OT‐MIP) capillary column has been prepared for chiral separation of ofloxacin enantiomers in CEC. The S‐ofloxacin imprinted OT column was fabricated by thermally initiated non‐covalent polymerization procedure inside a pretreated and silanized fused silica capillary. The template molecule was incorporated with methacrylic acid (MAA), ethylene glycol dimethacrylate (EDMA) and 4‐styrenesulfonic acid (4‐SSA) and dissolved in a porogen mixture of ACN/2‐propanol (9:1). The separation efficiency of the 4‐SSA MIP column was found quite better than that of the MIP column without 4‐SSA. It has been demonstrated that our OT‐MIP column can separate ofloxacin enantiomers with excellent chiral separation efficiency after tuning the various chromatographic conditions. The optimized chromatographic eluent was 85:15, v/v%, ACN/60 mM sodium acetate at pH 7. The separation efficiency and selectivity of chiral separation of this study were far better than those obtained by previous methods for chiral separation of R‐ and S‐ofloxacin.     

Preparation of chitosan‐based molecularly imprinted material for enantioseparation of racemic mandelic acid in aqueous medium by solid phase extraction

An S‐mandelic acid imprinted chitosan resin was synthesized by cross‐linking chitosan with glutaraldehyde in 2% acetic acid solution. S‐Mandelic acid imprinted chitosan resin was used to enantioselectively separate racemic mandelic acid in aqueous medium. When keeping the pH of sample solution (100 mM Tris‐H₃PO₄) at 3.5 and adsorption time at 40 min, the enantiomer excess of mandelic acid in supernatant was 78.8%. The adsorption capacities of S‐mandelic acid imprinted chitosan resin for S‐ and R‐mandelic acid were determined to be 29.5 and 2.03 mg/g, respectively. While the adsorption capacities of non‐imprinted cross‐linked chitosan for S‐ and R‐mandelic acid were 2.10 and 2.08 mg/g, respectively. The result suggests that the imprinted caves in S‐mandelic acid imprinted chitosan resin are highly matched with S‐mandelic acid molecule in space structure and spatial arrangement of action sites. Interestingly, the enantiomer excess value of mandelic acid in supernatant after adsorption of racemic mandelic acid by R‐mandelic acid imprinted cross‐linked chitosan was 25.4%. The higher enantiomer excess value by S‐mandelic acid imprinted chitosan resin suggests that the chiral carbons in chitosan and the imprinted caves in S‐mandelic acid imprinted chitosan resin combine to play roles for the enantioselectivity of S‐mandelic acid imprinted chitosan resin toward S‐mandelic acid. Furthermore, the excellent enantioselectivity of S‐mandelic acid imprinted chitosan resin toward S‐mandelic acid demonstrates that using chiral chitosan as functional monomer to prepare molecularly imprinted polymers has great potential in enantioseparation of chiral pharmaceuticals.     

Facile synthesis and application of teicoplanin‐modified magnetic microparticles for enantioseparation

A facile, mild method for the preparation of teicoplanin (TE) modified Fe₃O₄ microparticles (MPs) employing polydopamine (PDA) layer as a versatile secondary reaction platform was developed. The synthesized magnetic MPs (Fe₃O₄@PDA@TE) were characterized by various characterization techniques, such as TEM, zeta potential etc, to affirm the successful modification of TE to magnetic Fe₃O₄ MPs. Using the as‐synthesized materials as chiral adsorbents, efficient chiral separation of representative racemic compounds was successfully achieved. Due to the magnetic responsivity, the materials were easily isolated from the racemic solutions under an external magnetic field and could be readily reused for at least three times. Thus, the well‐prepared functional magnetic MPs have great potential in preparative chiral separation.     

Convenient enantioseparation by monolithic imprinted capillary clamped in a chip with electrochemical detection

A microchip integrated with a monolithic imprinted capillary has been manufactured for performing the chip-based capillary electrochromatographic enantioseparation. The microporous monolith anchored on the inner wall of the microchannel was prepared by in situ chemical copolymerization, and characterized with scanning electron microscopy, IR spectroscopy, and solid-state UV-vis spectroscopy. The monolithic network with high porosity gave a large surface area, good permeability, low mass-transfer resistance, and thus high separation efficiency. A portable microchip was conveniently constructed by integrating an imprinted capillary with 5-cm length as the separation channel and a carbon fiber microdisk working electrode for amperometric detection. Using L-tyrosine (L-Tyr) as the template molecule, Tyr enantiomers could be baseline separated within 55 s under the optimized preparation and separation conditions. The linear ranges for online amperometric detection of both Tyr enantiomers were from 20 to 2400 μM. The microporous monolithic chip strategy exhibited excellent separation efficiency and promising analytical application in enantioseparation. It opens an avenue for high-throughput screening of chiral compounds.     

Recovery and separation of erythromycin from industrial wastewater by imprinted magnetic nanoparticles that exploit β‐cyclodextrin as the functional monomer

A type of surface imprinting over magnetic Fe₃O₄ nanoparticles utilizing erythromycin‐A as a template for use in the separation and recovery of erythromycin was developed and investigated. As the intermolecular forces play a key role in the performance of imprinted materials, differential scanning calorimetry, and ¹H NMR spectroscopy was employed to evaluate the interactions between erythromycin and the functional monomer β‐cyclodextrin. To synthesize the surface imprinted polymers, magnetic Fe₃O₄ nanoparticles, the core materials, were modified with a free radical initiator to initialize polymerization in a “grafting from” manner. Then using acryloyl‐modified β‐cyclodextrin as the functional monomer and ethyleneglycol dimethacrylate as the cross‐linker, thin erythromycin‐imprinted films were fabricated by the radical‐induced graft copolymerization of monomers on the surface of the Fe₃O₄ nanoparticles. Selectivity experiments showed that the erythromycin‐A‐imprinted materials had recognition ability toward erythromycin derivatives. Finally, these magnetic molecularly imprinted particles were successfully used for the separation and enrichment of erythromycin from the mother liquor. The recovery, detected by high‐performance liquid chromatography and differential pulse voltammetry, approached 97%. The combination of the specific selectivity of the imprinted material and the magnetic separation provided a powerful tool that is simple, flexible, and selective for the separation and recovery of erythromycin.     

Open tubular capillary columns with basic templates made by the generalized preparation protocol in capillary electrochromatography chiral separation and template structural effects on chiral separation capability

Some open tubular (OT) molecule imprinted polymer (MIP) silica capillary columns have been prepared using atenolol, sulpiride, methyl benzylamine (MBA) and (1-naphthyl)-ethylamine (NEA) as templates by the pre-established generalized preparation protocol. The four MIP thin layers of different templates showed quite different morphologies. The racemic selectivity of each MIP column for the template enantiomers was optimized by changing eluent composition and pH. The template structural effects on chiral separation performance have been examined. This work verifies the versatility of the generalized preparation protocol for OT-MIP silica capillary columns by extending its boundary toward templates with basic functional group moieties. This study is the very first report to demonstrate a generalized MIP preparation protocol that is valid for both acidic and basic templates. The chiral separation performances of atenolol and sulpiride by the MIPs of this study were found better than or comparable to those of atenolol and sulpiride obtained by non-MIP separation techniques and those of some basic template enantiomers obtained by MIP based techniques.     

Examination of Template Structural Effects on CEC Chiral Separation Performance of Molecule Imprinted Polymers Made by a Generalized Preparation Protocol

Some acidic chiral templates were used to prepare open tubular (OT) molecule imprinted polymer (MIP) capillary columns to explore the effects of molecular structures of templates on chiral recognition capabilities and to verify the feasibility of the general MIP preparation protocol introduced in the previous study. The templates are phenyl carboxylic acids and their derivatives. Optimization was carried out for chiral separation of template enantiomers for each MIP column through varying pH and composition of eluent. It was found that the preparation protocol can be successfully applied for the appropriate templates with functional groups fulfilling the three-points interaction rule. The chiral separation performances were quite satisfactory for MIPs of such templates although they are yet inferior to the separation performances of the MIP columns fabricated with the templates of profen drugs (2-arylpropionic acids with a large substituent on the phenyl ring). Subtle variations of the template molecular structures have been found to be critical to enhance chiral recognition ability of the resultant MIP column.     

Preparation and Characterization of Prometryn Molecularly Imprinted Solid‐Phase Microextraction Fibers

Abstract

A novel reproducible solid‐phase microextraction (SPME) coating was prepared on the surface of silanized silica fibers by molecularly imprinted polymerization using prometryn as template molecule. The structure and extraction performance of molecularly imprinted polymer (MIP) coating was studied with the scanning electron microscope and high performance liquid chromatography (HPLC). Specific selectivity was found with the prometryn MIP‐coated fiber to prometry and its structural analogues such as atrazine, simetryn, terbutylazin, ametryn, propazine and terbutryn. In contrast, these triazines could not be selectively extracted by the non‐imprinted polymer fiber or commercial polydimethylsiloxane (PDMS), polydimethylsiloxane/divinylbenzene (PDMS/DVB), polyacrylate (PA) fibers.     

Investigation of enantiomer recognition of molecularly imprinted polymeric monoliths in pressurized capillary electrochromatography screening the amino acids and their derivatives

Molecularly imprinted monolithic columns were prepared for chiral separation of tyrosine and its amino acid derivatives by in situ therm-initiated copolymerization of methacrylic acid, 4-vinylpyridine and ethylene glycol dimethacrylate. The enantiomers were rapidly separated on monolithic columns in less than 10 min by pressurized capillary electrochromatography (pCEC). The influences of several parameters such as the content of cross-linking monomer on the composition of the pre-polymerization mixture were systematically investigated. The influence of the pCEC conditions including the composition of the mobile phase was also optimized to obtain the good enantioseparation. It was found that in addition to molecularly imprinted recognition, chromatographic retention and electrophoretic migration play important roles in the retention and chiral recognition of molecularly imprinted polymer (MIP) columns. The cross-selectivity for similar amino acids and its derivatives were systematical investigated for understanding the recognition mechanism on the MIP monolithic columns. The results indicated that molecularly imprinted polymer recognizes the template molecule by its molecular shape defined binding cavity.     

Preparation and Characterization of Fe3O4/Ethiodized‐oil Magnetic Fluids Used in Arterial Embolization Hyperthermia

Fe₃O₄ nanoparticles (NPs) were prepared by the co‐precipitation of Fe³⁺ and Fe²⁺ with ammonium hydroxide, and were modified by four different surfactants. The modified Fe₃O₄ NPs were characterized by Fourier transform infrared spectroscopy, X‐ray powder diffraction, transmission electron microscopy and vibrating sample magnetometer. Then, the modified Fe₃O₄ NPs were dispersed in ethiodized‐oil by mechanical agitation and ultrasonic vibration to obtain stable Fe₃O₄/ethiodized‐oil magnetic fluids (MFs). The magnetic properties and rheological properties of the MFs were measured using a Gouy magnetic balance and a rotational rheometer, respectively. The saturation magnetization of the Fe₃O₄ modified by oleic acid was 52.1 emu/g. Furthermore, the result showed that the inductive heating effect of oleic acid stabilized Fe₃O₄/ethiodized‐oil MF was remarkable and it only took 650 s for the temperature rising from 25°C to 65°C. The specific absorption rate of the MF was 50.16 W/(g of Fe). It had a potential application in arterial embolization hyperthermia.     

三元交联剂分子烙印手性固定相

采用２－乙烯基吡啶＋丙烯酰胺复合功能单体,以三甲氧基丙烷三甲基丙烯酸酯为三元交联剂制备了苯甲氧羰基－Ｌ－色氨酸烙印手性固定相,并与二元交联剂烙印相同氨基酸衍生物的情况进行了对比,发现三元交联剂在较小的用量下就可使分子烙印聚合物达到足够的交联度,实现烙印分子对映体的基线分离。     

Selective extraction of morphine from biological fluids by magnetic molecularly imprinted polymers and determination using UHPLC with diode array detection

The determination of morphine concentration in the blood and urine is necessary for patients and recruitment purposes. Herein, a magnetic molecularly imprinted polymer for selective and efficient extraction of morphine from biological samples was synthesized by using a core–shell method. Fe₃O₄ nanoparticles were coated with SiO₂‐NH₂. The molecularly imprinted polymer was coated on the Fe₃O₄/SiO₂‐NH₂ surface by the copolymerization of methacrylic acid and ethylene glycol dimethacrylate in the presence of morphine as the template molecule. The morphological and magnetic properties of the polymer were investigated. Field‐emission scanning electron microscopy indicated that the prepared magnetic polymer is almost uniform. The saturation magnetization values of Fe₃O₄ nanoparticles, Fe₃O₄/SiO₂‐NH₂, and the magnetic polymer were 48.41, 31.69, and 13.02 emu/g, respectively, indicating that all the particles are superparamagnetic. Kinetics of the adsorption of morphine on magnetic polymer were well described by second‐order kinetic and adsorption processes and well fitted by the Langmuir adsorption isotherm, in which the maximum adsorption capacity was calculated as 28.40 mg/g. The recoveries from plasma and urine samples were in the range of 84.9–105.5 and 94.9–102.8%, respectively. By using the magnetic molecularly imprinted polymer, morphine can selectively, reliably, and in low concentration be determined in biological samples with high‐performance liquid chromatography and UV detection.     

Electrochemical sensor based on super-magnetic metal–organic framework@molecularly imprinted polymer for Sarcosine detection in urine

Accurate determination of Sarcosine (SAR) in urine with high sensitivity and selectivity is important, because it was recently recommended as a prospective biomarker for prostate cancer (PCa) and significant for the early identification of PCa. In this study, an electrochemical sensor based on Fe₃O₄ incorporated metal–organic frameworks (MOFs) @molecularly imprinted polymer (MIP) was constructed for SAR detection. Magnetic Fe₃O₄ nanoparticles embedded zeolitic imidazolate framework-8 (ZIF-8) was used as the support of MIP. MIP provides specific recognition sites for template molecules SAR and MOFs increase the rate of mass transfer and adsorption capacity due to the porous structure. The synthesized super-magnetic Fe₃O₄@ZIF-8@MIP was self-assembled onto an Au electrode in magnetic field and used as the sensing unit of electrochemical sensor. Cyclic voltammetry was used to monitor the electrochemical behavior, and the binding of SAR resulted in a reduction in the measured current. The results revealed a wide linear range from 1 to 100 pM towards trace SAR determination, with extremely low limit of detection down to 0.4 pM. In conclusion, the Fe₃O₄@ZIF-8@MIP based sensor provides a selective, sensitive, and convenient method for SAR diagnosis and other cancer marker detection.     

Molecularly imprinted polymer functionalized magnetic Fe3O4 for the highly selective extraction of triclosan

We present a facile strategy to prepare the molecularly imprinted polymers layer on the surface of Fe₃O₄ nanoparticles with core‐shell structure via sol–gel condensation for recognition and enrichment of triclosan. The Fe₃O₄ nanoparticles were first synthesized by a solvothermal method. Then, template triclosan was self‐assembled with the functional monomer 3‐aminopropyltriethoxysilane on the silica‐coated Fe₃O₄ nanoparticles in the presence of ethanol and water. Finally, the molecularly imprinted polymers were formed on the surface of silica‐coated Fe₃O₄ nanoparticles to obtain the product. The morphology, magnetic susceptibility, adsorption, and recognition property of magnetic molecularly imprinted polymers were characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffractometry, vibrating sample magnetometry, and re‐binding experiments. The magnetic molecularly imprinted polymers showed binding sites with good accessibility, fast adsorption rate, and high adsorption capacity (218.34 μg/g) to triclosan. The selectivity of magnetic molecularly imprinted polymers was evaluated by the rebinding capability of triclosan and two other structural analogues (phenol and p‐chlorophenol) in a mixed solution and good selectivity with an imprinting factor of 2.46 was obtained. The application of triclosan removal in environmental samples was demonstrated.