簇合物中锥形四重桥硫3d轨道成键的EHMO研究

运用EHMO方法对四个[M_4S_2]（M＝Co，Nb）型簇合物的电子结构进行了计算，通过对硫原子3d轨道引入前后体系总能量、轨道能级、电荷分布和Mulliken键级等性质的比较，发现簇合物中锥形四重桥硫原子的3d轨道参与了成键，对稳定[M_4S_2]结构单元有重要的作用．     

Mo(W)-Co(Ni,Fe)簇合物的加氢脱硫催化活性

对线型、立方烷型和笼状３种不同构型的Ｍｏ（Ｗ）－Ｃｏ（Ｎｉ，Ｆｅ）－Ｓ（Ｏ）簇共１２种化俣物进行了噻吩加氢硫和环己烯加氢的催化活性研究，讨论了簇合物的组成，金属原子的配比、价态与催化活性的关系，探讨了不同构型对活性的影响。     

Cu_4簇合物“元件组装”合成及其结构与电催化作用

以元件组装方法合成了Cu4(HL)4·2H2O簇合物(H2L=N-乙氧羰基-N′-o-硝基苯基硫脲)。用X射线单晶衍射技术、核磁共振谱、红外光谱和元素分析等确定了簇合物及其相应组装元件的晶体结构和化学组成,并对簇合物的电催化性质进行了检测。结果表明,该簇合物由4个Cu(I)以M-M键构成簇核,4个硫脲配体分别以硫羰基硫原子和氮原子配位于Cu(I)构成簇合物配位结构,DPV分析显示该簇合物对O2具有较高催化活性。     

含强端基配体桥硫簇合物的电子结构与成键

继过去20多年过渡金属原子簇化学的飞速发展,大量含μ_2-S桥的双核或多核过渡金属簇合物相继被合成出来.虽然对含弱端基配体桥硫簇合物的电子结构和成键特征用各种量子化学方法进行了较为广泛的研究,但对含强端基配体桥硫异金属簇合物的电子结构方面的研究尚少.为系统地总结桥硫簇合物的成键规律,本文用MAD—SCC—EHMO法计算了6个端基配体为NO或CO的异金属桥硫簇合物的电子结构,并系统地分析其成键特征。     

一种含桥基的三钴羟基硫簇合物的合成与结构

用CO2（CO）8与各种硫代酸胺反应得到不同配位方式且具有手征性的钴羰基簇衍生物，我们曾作过报导[1]．鉴于硫腺和硫代酰胺有相似之处：都含有N、S配位原子．因而，可以期望硫脲与相应过渡金属联基化合物反应，而得到结构新颖、配位方式独特的簇合物．本文用Co2（CO）8和反应，     

钼铁钴硫簇合物催化乙炔还原性质的研究

钼铁钴硫簇合物催化乙炔还原性质的研究①南玉明②（大庆石油学院石化系，安达１５１４００）徐吉庆蔡辉（吉林大学化学系，长春１３００２３）关键词簇合物类立方烷结构催化电化学性质在化学模拟生物固氮研究的推动下，人们已合成了上百种Ｍｏ－Ｆｅ－Ｓ簇合物，并研究了...     

Lien元素簇合物的成键作用

镇元素簇合物是人们最感兴趣的簇合物之一l‘－’］．已有的。作主要是研究它的稳定性和电子结构，对其成键性质还研究得不多·为止匕我们对Lkin为元素簇合物中所含原子个数，e为该化合物的电荷）进行了定域化研究，并得出一些有意义的结果·1计算我4rl采用GAMESS90程序m，在4－31G基组下进行了正则分子轨道SCFi十算（闭壳层采用RHF，开壳层采用UHF）．然后，以QSU90程序问，用B0yS方法进行了定域化计算，得到定域分子轨道（LM），再根据LMO的系数和集居数分析，判断各分子中原子的成键情况问．共计算了18个簇合物．它们的原子数…     

平面型四核铜簇合物Cu4(CH2XMen)4桥键性质的密度泛函研究

采用密度泛函B3LYP方法，用LanL2DZ和6—31G^＊基组分别优化了平面型四核铜簇合物Cu4（CH2SiMe3）4和Cu4（CH2XMe2）4（X=P，As）的几何构型，并对B3LYP／LanL2DZ方法优化的结构进行了红外振动频率计算和自然键轨道分析．结果表明，簇合物均呈笼状结构，Cu—C—Cu三中心桥键之间电子的离域增强了Cu簇合物的稳定性，配位C原子的C—H平伏键与C—Cu配位键之间存在σ-超共轭效应．     

簇合物Mo2X4(X＝S,O)电子结构和光谱性质的Ab Initio研究

在abinitio水平上对含cis/trans-MO₂S₄核和含Mo₂O₄核簇合物的电子结构进行了研究.对钼原子选取和构造了一组适合于含Mo-Mo金属键的双核钼簇合物从头算的(4s4p2d)基组,利用该基组并结合自然键轨道(NBO)方法,对含上述簇胳的3个簇合物的电子结构进行了研究,并与相应的钨簇合物进行了比较.     

[Fe4S4Cl4—n（S2CNEt2）n]^2—（n=0,1,2,4）：原子簇的电子结构研究

用CNDO/2(s,p,d)方法研究了类立方烷系列Fe-S簇合物[Fe_4S_4Cl_4(?)(S_2CNEt_2)_n]~(2-)(n=0,1,2,4)的电子结构。得出[S_2CN(Et)_2]-螯合配位Fe_4S_4~(2+)簇合物中存在两类不同价态铁原子的结论;骨架Fe_4S_4~(2+)中μ_3-S电子是非定域化的,同Mssbauer谱测定结果一致。讨论了簇合物Fe—Fe之间的成键作用、螫合配体的作用和氧化还原性质。     

Aqueous solution chemistry of [Mo3CuSe4]n+ (n = 4, 5) and [W3CuQ4]5+ (Q = S, Se) clusters

The triangular cluster [Mo3Se4(H2O)9]4+ reacts with Cu turnings to give a new heterometallic cuboidal cluster [Mo3CuSe4(H2O)10]4+(purple; UV/Vis lambda(epsilon): 352(3907), 509(2613)). The reaction of [Mo3Se4(H2O)9]4+ with CuCl afforded the 5+ cube [Mo3CuSe4(H2O)10]5+(red; UV/Vis lambda(epsilon): 356(5406), 500(3477)). In contrast, [W3Se4(H2O)9]4+ both with Cu and CuCl gives the 5+ cube, [W3CuSe4(H2O)10]5+(yellow-green; UV/Vis lambda(epsilon): 312(5327), 419(3256) and 628(680)). Cyclic voltammetry of [M3CuQ4(H2O)10]5+ in 2 M HCl (M = Mo, W; Q = S, Se) shows a reversible one-electron reduction wave for the Mo clusters, but no reduction occurs for the W clusters prior to H+ reduction. In HCl solutions, Cl is coordinated to the Cu site of the clusters, alongside some less extensive coordination to Mo and W, and for [W3(CuCl)S4(H2O)6Cl3]+, isolated as the supramolecular adduct with cucurbit[6]uril, [W3(CuCl)S4(H2O)6Cl3]2Cl2 x C36H36N24O12 x 12H2O, the crystal structure was determined (Cu-W 2.856(4) angstroms, W-W 2.7432(15) angstroms, Cu-Cl 2.167(13) angstroms).     

Preparation and properties of the full series of cuboidal clusters [Mo(x)W4-xSe4(H2O)12]n+ (n = 4-6) and their derivatives

Hydrothermal reactions between incomplete cuboidal cluster aqua complexes [M3Q4(H2O)9]4+ and M(CO)6 (M = Mo, W; Q = S, Se) offer easy access to the corresponding cuboidal clusters M4Q4. The complete series of homometal and mixed Mo/W clusters [Mo(x)W4-xQ4(H2O)12]n+ (x = 0-4, n = 4-6) has been prepared. Upon oxidation of the mixed-metal clusters, it is the W atom which is lost, allowing selective preparation of new trinuclear clusters [Mo2WSe4(H2O)9]4+ and [MoW2Se4(H2O)9]4+. The aqua complexes were converted by ligand exchange reactions into dithiophosphato and thiocyanato complexes, and crystal structures of [W4S4((EtO)2PS2)6], [MoW3S4((EtO)2PS2)6], [Mo4Se4((EtO)2PS2)6], [W4Se4((i-PrO)2PS2)6], and (NH4)6[W4Se4(NCS)12]-4H20 were determined. Cyclic voltammetry was performed on [Mo(x)W4-xCO4(H2O)12]n+, showing reversible redox waves 6+/5+ and 5+/4+. The lower oxidation states are more difficult to access as the number of W atoms increases. The [Mo2WSe4(H2O)9]4+ and [MoW2Se4(H2O)9]4+ species were derivatized into [Mo2WSe4(acac)3(py)3]+ and [MoW2Se4(acac)3(py)3]+, which were also studied by CV. When appropriate, the products were also characterized by FAB-MS and NMR (31P, 1H) data.     

Synthesis and structure of nickel-containing cuboidal clusters derived from [W3Se4(H2O)9]4+. Site-differentiated substitution at the nickel site in the series [W3NiQ4(H2O)10]4+ (Q = S, Se)

New Ni-containing heterometallic cuboidal cluster aqua complex [W3(NiCl)Se4(H2O)9]3+, the missing link in the family of the M3NiQ4 clusters (M = Mo, W; Q = S, Se), has been prepared by the reaction of [W3Se4(H2O)9]4+ with Ni in 2 M HCl. Single crystals of edge-linked double-cuboidal cluster [{W3NiSe4(H2O)9}2](pts)8.18H2O (pts = p-toluenesulfonate) were grown from the solution of the aqua complex in 3 M Hpts, and their structures were determined. The Ni site in the clusters [W3(NiCl)Q4(H2O)9]3+ selectively coordinates typical pi-acceptor ligands such as CO, olefins, acetylenes, phosphines, arsines, or SnCl3-. This allows stabilization by coordination of such elusive species as HP(OH)2 and As(OH)3. The stability constants for coordination of HP(OH)2, As(OH)3, and SnCl3- were determined. The Se for S substitution increases the stability by 1-2 orders of magnitude. Supramolecular adducts with cucurbit[6]uril (Cuc), [W3(Ni(HP(OH)2))Q4(H2O)9]Cl4.Cuc.11H2O and [W3(NiAs(OH)3)S4(H2O)8Cl]Cl3.Cuc.13H2O, were isolated and structurally characterized.     

Catalytic reactions of C3-cyclic olefins in the presence of metal complexes. 4. Ni complexes as catalysts for the [2+2]-cyclodimerization of spiro[2,3]hex-1-ene

Ni(0), Ni(I), and Ni(II) complexes, differing in the ligand environment of the central atom, bring about di-, tri-, and oligomerization of spiro[2,3]-hex-1-ene (SH). The most efficient catalyst for the [2+2]-cyclodimerization of SH is NiBr(PPh₃)₃, which gives virtually a single product, the SH cyclo dimer. It has been found that high conversion and selectivity in the [2+2]-cyclodimerization of SH is achieved by using organoaluminum compounds as catalysts.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 2, pp. 345–348, February, 1990.For previous communication, see [1].     

Tri- and pentanuclear tungsten-(mu-S)-M clusters (M = W, Cu, Ag)

The thiotungstate [Et4N]2[OW(WS4)2], [Et4N]2.1, containing the linear [[S2W(VI)(mu-S)2]2W(IV)=O] core, was prepared from [Et4N]2[WS4] in the presence of the sulfide scavenger Cd2+. Addition of 1,2-bis(o-diphenylphosphinophenyl)ethane (diphosphine) and Cu+ or Ag+ to solutions of 1 in MeCN/DMF led to coordination of the (diphosphine)Cu/Ag fragments to the terminal sulfido ligands of 1, yielding novel linear pentanuclear, heterometallic clusters [mu-[OW(IV)(DMF)(W(VI)S4)2][M(diphosphine)]2], 2 (M = Cu) and 3 (M = Ag). Along with 2, the trinuclear cluster [[mu-(W(VI)S4)[Cu(diphosphine)(2)]], 4, was also obtained. The molecular and crystal structures of [Et4N]2.1, 2.MeCN, 3.MeCN, and 4.2MeCN.CH2Cl2 have been determined.     

pH-dependent assembly of hybrids based on Wells-Dawson POM/Ag chemistry

Four new hybrids based on the Wells-Dawson polyoxometalate [P2W18O62](6-) (P2W18), ([Ag(bipy)]2[P2W18O62]).2[H2bipy].4H2O (1), ([Ag(bipy)]4[P2W18O62]).2[Hbipy](2), K[P2W18O62].2.5[H2bipy].2H2O (3), and [P2W18O62] 2.[H2bipy]4.[Hbipy]4 .3H2O (4), were hydrothermally synthesized and structurally characterized by routine techniques and single-crystal X-ray diffraction. Compounds 1 and 2 are isolated at lower pH values. 1 represents a 3D (4,4)-net structure with NbO topology, in which the P2W18 clusters are modified by four Ag-N coordination polymeric chains, and 2 exhibits a 3D (3,4)-net structure with the (9(2).12)(8.10(4).12)(3(2).10(2).11(2))(3.6.10(2).12(2)) topology, in which Ag-bipy layers are intercalated by the dimer of P2W18 clusters in a staggering mode, and the P2W18 clusters show the highest coordination number to date. By increasing the pH value, compounds 3 and 4 are obtained as supramolecular compounds. Their structural differences reveal that the pH value of the reaction system is the key factor influencing the structure and topology of these compounds, which can be explained by the acid-base chemistry of the molecular building units and silver chemistry.     

W6S8] octahedral tungsten clusters functionalized with thiophene derivatives: toward polymerizable building blocks

The functionalization of octahedral [W(6)S(8)] clusters with a family of phosphino-thiophene ligands has been investigated with the goal of synthesizing extended networks of [W(6)S(8)] units covalently linked to one another through thiophene-conjugated bridges. In addition to new phosphino-thiophene ligands, eight clusters were synthesized and characterized by (1)H and (31)P NMR spectroscopies, elemental analysis, and UV-vis absorption. These clusters are formulated [W(6)S(8)(T-PPh(2))6] (1a), [W(6)S(8)(T-PEt(2))(6)] (1b), [W(6)S(8)(2T-PPh(2))(6)] (2a), [W(6)S(8)(2T-PEt(2))(6)] (2b), [W(6)S(8)(3T-PPh(2))(6)] (3a), [W(6)S(8)(3T-PEt(2))(6)] (3b), [W(6)S(8)((2T)(3)P)(6)] (4), and [W(6)S(8)(2EDOT-PEt(2))(6)] (5) (T = thiophene and EDOT = 3,4-ethylenedioxythiophene). The molecular structure of six of them has been obtained by single-crystal X-ray diffraction analysis. All of them crystallize in the P1 triclinic space group except 3b, which has the P2(1)/c monoclinic symmetry. The redox behavior of both the ligands and the corresponding functionalized clusters has been investigated by cyclic voltammetry. An attempt to electropolymerize these species is also reported.     

One-dimensional indium sulfides with transition metal complexes of polyamines

Three new indium sulfides, [Ni(dien)2]0.5[InS2] (dien = diethylenetriamine) (1), [Ni(dap)3]0.5[InS2] (dap = 1,2-diaminopropane) (2), and [Ni(tepa)]2[In4S7(SH)2].H2O (tepa = tetraethylenepentamine) (3), have been prepared under solvothermal conditions and characterized by single-crystal X-ray diffraction. Compounds 1 and 2 consist of discrete 1-D {[InS2]-} infinity chains with complex cations as charge-compensating ions, while compound 3 consists of a novel 1-D anionic chain constructed from arachno-shaped In4S11 clusters. The sulfide chain of 3 coordinates into the complex cations via the nonterminal S atoms of the polymeric anion, forming a covalently linked organic-inorganic hybrid compound.     

Preparation and substitution chemistry of [Bu4N]2[W6Cl8(p-OSO2C6H4CH3)6]. A useful precursor for pseudohalide, acetate, and organometallic complexes containing the [W6Cl8](4+) core

The tosylate (p-toluenesulfonate) cluster [Bu4N]2[W6Cl8(p-OSO2C6H4CH3)6] (1) has been prepared and characterized by IR and NMR spectroscopy, elemental analysis, and an X-ray crystal structure. This cluster complex is shown to be a useful starting material for the preparation of pseudohalide clusters, [Bu4N]2[W6Cl8(NCQ)6] (Q = O (2), S (3), and Se (4)), in high yields. Cluster 1 also serves as a precursor to the new cluster compounds: [Bu4N]2[W6Cl8(O2CCH3)6] (5), [Bu4N]2[W6Cl8((mu-NC)Mn(CO)2(C5H5))6] (6), [W6Cl8((mu-NC)Ru(PPh3)2(C5H5))6][ p-OSO2C6H4CH3]4 (7), and [W6Cl8((mu-NC)Os(PPh3)2(C5H5))6][ p-OSO2C6H4CH3]4 (8). X-ray crystal structures are reported for 1, 4, and 5.     

A localized molecular orbital study on the bonding of> Mo3S4]2Mo> and> Mo3S4]CuI> versus (C6H6)2Cr and C6H6Cr(CO)3

The energy-localized CNDO/2 molecular orbitais have been calculated for the clusters containing molybdenum, > {Mo₃S₄₂Mo}⁸⁺ and> Mo₃S₄]CuI> ⁴⁺, versus the prototype arene-metal sandwich (C₆H₆)₂Cr and half-sandwich complexes C₆H₆Cr(CO)₃. The bonding characteristics of these compounds are described from a localization bonding viewpoint. There are two typical M-arene and M-[Mo₃S₄] bondings. One is formed by electron donation from the three-center two-electron π-bonds in the arene or [Mo₃S₄]⁴⁺ ligands into the vacant hybrid orbitais of the “stranger” metal atom. In the other M-arene or M-[Mo₃S₄] bond there is very little donation by the lone electron pair occupying the d AOs of the “stranger” metal atom to the arene or [Mo₃S₄]⁴⁺ ligands. The analogy of the ligand [Mo₃S₄]⁴⁺ in the clusters studied with the ligand benzene is also briefly discussed.