具有孪晶结构的红细胞状硫化铜的制备及其光芬顿催化性能

采用简单的溶剂热法制备出具有孪晶结构的红细胞状硫化铜材料。研究不同前驱体比例和反应时间对硫化铜产物微观形貌的影响，并对孪晶结构红细胞状硫化铜可能的形成机理进行分析。在可见光照射下孪晶结构红细胞状硫化铜与H₂O₂组成的类芬顿系统表现出优异的降解性能，光照50 min后，亚甲蓝降解率可达95%。对比孪晶结构红细胞状硫化铜与合成的花球状硫化铜的催化性能，结果表明含有孪晶结构的红细胞状硫化铜对亚甲蓝的降解性能更好，说明孪晶的存在有利于加速光生电子-空穴的分离。     

三角形Au@TiO2介孔催化剂可见光降解亚甲蓝

利用溶胶凝胶法制备出一种三角形Au@TiO₂核壳材料。经过水热晶化,该材料膨胀至300 nm,壳层TiO₂晶化为介孔锐钛矿相,但核心三角形Au颗粒的形貌保持不变。采用粉末X射线衍射(PXRD)、ζ电位、高分辨透射电子显微镜(HRTEM)、热重分析(TGA)、光致发光(PL)光谱、光电流(i-t)以及光催化降解技术,对样品的结构和性能进行了系统、详细的检测与分析。经过晶化处理的Au@TiO₂在可见光波段的光降解亚甲蓝性能比未晶化时有了显著的提升,1 mg·mL^-1 Au@c-TiO₂可以在可见光照射1 h后实现对60 mg·L^-1亚甲蓝全降解。电子顺磁共振(EPR)测试表明·O₂^-和·OH两种自由基对光降解起到了很大作用。通过综合分析实验结果和时域有限差分(FDTD)分析,探究了催化反应的机理。     

三角形Au@TiO2介孔催化剂可见光降解亚甲蓝

利用溶胶凝胶法制备出一种三角形Au@TiO₂核壳材料。经过水热晶化,该材料膨胀至300 nm,壳层TiO₂晶化为介孔锐钛矿相,但核心三角形Au颗粒的形貌保持不变。采用粉末X射线衍射(PXRD)、ζ电位、高分辨透射电子显微镜(HRTEM)、热重分析(TGA)、光致发光(PL)光谱、光电流(i-t)以及光催化降解技术,对样品的结构和性能进行了系统、详细的检测与分析。经过晶化处理的Au@TiO₂在可见光波段的光降解亚甲蓝性能比未晶化时有了显著的提升, 1 mg·mL^-1 Au@c-TiO₂可以在可见光照射1 h后实现对60 mg·L^-1亚甲蓝全降解。电子顺磁共振(EPR)测试表明·O₂^-和·OH两种自由基对光降解起到了很大作用。通过综合分析实验结果和时域有限差分(FDTD)分析,探究了催化反应的机理。     

水热法制备具有高光催化活性的镧掺杂二氧化钛纳米晶

采用水热法合成钛酸钾(K₂Ti₈O₁₇)纳米棒,并将它作为前驱体水热转晶合成TiO₂纳米晶,同时通过在水热体系中引入稀土元素La³⁺实现对TiO₂的La掺杂.考察了不同条件下钛酸盐向TiO₂的转晶过程,发现水热溶液的pH值、温度以及预处理步骤对转晶过程有很大的影响.利用X射线衍射以及透射电子显微镜对样品的晶相和形貌进行了表征.利用电感耦合等离子体原子发射光谱测量了所合成的La掺杂TiO₂样品中的La含量.通过在紫外光下降解甲基橙(MO,10mg/L)测试了La掺杂TiO₂样品的光催化性能.结果表明La掺杂后TiO₂的光催化活性大大提高.在0.15mol/LLa³⁺浓度下180oC水热合成的La掺杂TiO₂样品显示了最佳的光催化活性.其对MO的光催化降解反应常数高达0.11min^-1,大约是空白TiO₂样品的9.20倍,P25TiO₂的3.69倍.     

微观形貌可控TiO2的制备及其光解水产氢性能

通过简单的沉淀、水热、溶剂热和溶胶凝胶法分别制备出实心球（s-TiO₂）、空心球（h-TiO₂）、纳米管（a-TNT）和介孔形状（m-TiO₂）的锐钛矿晶型结构TiO₂光催化材料。采用HRTEM、FESEM、XRD、UV-Vis、N₂吸-脱附和光解水制氢反应等对催化材料的微观表面结构、光吸收性能以及不同形貌光催化剂的光解水制氢的性能对比研究。结果表明：s-TiO₂具有最高的光催化活性,主要归功于s-TiO₂独特的微观形貌结构所致,s-TiO₂是由亚微晶颗粒组成的介孔状实心球,亚微晶粒径相比较其它形貌的材料要小,有利于光生载流子的迁移,抑制电子-空穴对的体相复合,导致活性提高。同时,晶化过程用于传质通道的无序微孔可以束缚用作牺牲剂的CH₃OH分子,使得空穴快速被牺牲剂消耗,减少与电子复合。     

三维Cu-MOF对亚甲蓝的吸附和光催化降解及其机理

本文报道了[Cu₃(ppda)₃(tib)₂(H₂O)₄]·6H₂O (Cu-MOF)的合成、结构、吸附和光催化降解性能。在Cu-MOF中，1，4-苯二乙酸(H₂ppda)和1，3，5-三(1-咪唑基)苯(tib)配体交替连接Cu离子形成二维层，层与层之间通过trans-ppda^2-相互穿插形成稳定的三维结构。Cu-MOF对亚甲蓝(MB)的催化效率为97%，最高反应速率常数为0.019 7 min^-1。光催化降解机理：在光的激发下，催化剂表面的光生电子和空穴对发生分离，并与O₂、H₂O、H₂O₂反应生成活性物质，将染料降解为CO₂和H₂O。在MB溶液中加入NaCl (200 g·L^-1)后，Cu-MOF的吸附量有所提升(87.23 mg·g^-1)，准二级动力学模型和Langmuir等温线模型的实验数据拟合程度较好，该吸附的主要过程为单层化学吸附。     

二维镍配位聚合物(Ni-CP)和Ag@Ni-CP肖特基结的制备及其光催化降解阳离子染料

采用水热法合成了一种新的二维镍(Ⅱ)配位聚合物(Ni-CP),命名为[Ni(DDB)_0.5(2,2′-bipy)(H₂O)]·H₂O(H₄DDB=1,4-二(3,5-二羰基苯氧基)苯,2,2′-bipy=2,2′-联吡啶),并通过元素分析、热重分析、粉末X射线衍射、扫描电镜、透射电镜和X射线光电子能谱对其进行了表征。单晶结构分析表明,配位聚合物通过DDB^4-配体以μ₄方式形成二维波浪状网络结构。采用光还原法制备了具有肖特基结的Ag负载产品(Ag@Ni-CP)。研究了Ni-CP和Ag@Ni-CP的光催化降解性能,后者表现出优异的降解效果,特别是对罗丹明B和亚甲蓝,60 min内降解率快速高达99%,与报道的金属有机骨架催化剂材料相比,Ag@Ni-CP表现出更高更快的降解性能。通过自由基俘获实验研究了Ag@Ni-CP的光催化机理。     

纳米TiO2的制备及对三甲胺气体的敏感性能

用硬脂酸凝胶法制备纳米TiO₂材料,并用XRD、TEM、IR对纳米晶的晶型、晶粒大小及形貌进行表征；用XPS分析不同晶型的纳米TiO₂表面吸附氧的情况，发现锐钛矿型纳米TiO₂比金红石型纳米TiO₂有较多的表面吸附氧. 检测了不同晶型纳米TiO₂对三甲胺（TMA）气体的敏感性能.结果表明锐钛矿型纳米TiO₂对TMA有较高的灵敏度. 对敏感性能的机理进行了讨论.     

硫掺杂橄榄状BiVO4上可见光降解亚甲基蓝和甲醛水溶液性能

在无和有S源(Na₂S或硫脲)存在的条件下,采用十二胺辅助的醇-水热法制备了多孔单斜晶相结构的BiVO_4-δ和不同含量S掺杂的BiVO_4-δ光催化剂.利用多种手段表征了催化材料的物化性质,评价了它们在可见光照射下催化降解亚甲基蓝或甲醛的反应活性.结果表明,所制光催化剂为单斜白钨矿晶相结构,具有多孔橄榄状形貌,比表面积为8.4-12.5m²/g,带隙能为2.40-2.48eV.在S掺杂BiVO_4-δ表面同时含有Bi⁵⁺,Bi⁴⁺,V⁵⁺和V⁴⁺物种.S掺杂对BiVO_4-δ光催化剂的活性影响很大.在可见光下照射下,BiVO_4-δS_0.08光催化剂对亚甲基蓝和甲醛降解反应显示出最高的光催化活性,这与其较高的表面氧物种浓度和较低的带隙能相关.     

基于医用纱布负载的二氧化锰纳米颗粒用于亚甲蓝染料的去除

以医用纱布（medical gauze,MG）同时作为模板和还原剂,通过原位氧化还原反应,简便地制备了MG负载的MnO₂纳米颗粒（MnO₂ NPs/MG）,并对其形貌、成分进行表征。结果表明,MnO₂ NPs均匀地分散于MG纤维表面。结合MnO₂纳米材料的吸附性能和MG复合材料的操作便捷性,将MnO₂ NPs/MG进一步应用于亚甲蓝染料的去除。结果表明,在中性条件下,通过简单的浸泡搅拌,MnO₂ NPs/MG对亚甲蓝的去除率可达85.09%,并且可以通过增大吸附材料用量与染料初始浓度的比例提高去除率。等温吸附和动力学研究证明,MnO₂ NPs/MG对亚甲蓝的吸附符合Langmuir吸附等温模型和拟二级动力学模型。     

Photocatalytic degradation of norfloxacin and its intermediate degradation products using nitrogen‐doped activated carbon–CuS nanocomposite assisted by visible irradiation

We have synthesized a nitrogen‐doped activated carbon (NAC) derived from oak using KOH and N₂ thermal treatment at 400 °C as well as CuS nanoparticles. The NAC was decorated with the synthesized CuS to apply as a photocatalyst for degradation of norfloxacin (NOR). Before its application for photodegradation, the adsorbent/photocatalyst structural properties were investigated using X‐ray diffraction, X‐ray photoelectron spectroscopy, Raman spectroscopy and scanning electron microscopy. The photocatalytic degradation of NOR was successfully done under visible light using NAC–CuS. The results revealed that the investigated fluoroquinolone degraded very efficiently and pseudo‐first‐order kinetics was adopted for the photodegradation process. In addition, isothermal studies showed that the adsorption process in darkness followed the Langmuir model. The degradation characteristics of the NAC–CuS photocatalyst were studied for 120 min and 15 h under visible light for degradation of NOR, exhibiting a good efficiency for NOR removal. During 120 min of degradation, some intermediate degradation products that can be considered as secondary pollutants were produced. Then, to degrade these pollutants the radiation time was increased up to 15 h. The results displayed a perfect degradation of NOR and its secondary pollutants. The effective variables including pH, degradation time and photocatalyst dosage were optimized and studied in a multivariate method using Design Expert 7. Determination of photodegradation products was carried out using liquid chromatography–mass spectrometry. The results are of significance for estimating the environmental fate of NOR in aqueous media.     

Catalytic decomposition of Bismarck brown by nanostructured CuS in mild conditions

Two samples of nanostructured CuS were synthesized by two different methods, and were used for degradation of Bismarck Brown, as an azo dye. The first sample consists an assembly of nanosheets, and the second one has prolat-like spheroid structure. It is shown that CuS nanosheets have higher catalytic activity than the second sample for degradation of Bismarck Brown in the presence of H₂O₂. The catalytic activity of the CuS nanosheets was investigated by different variables such as reaction time, solution temperature, volume of H₂O₂, catalyst mass, dye concentration and presence of NaCl. CuS nanosheets have high degradation efficiency under mild conditions and in the dark medium. It was found that the rate of dye degradation by H₂O₂ is fast in the presence of CuS nanosheets, and most of the reactant molecules are degraded within 10?minute. As the main products of dye degradation by the CuS nanosheet, and in presence of H₂O₂ are CO₂ and CO, it is a good catalyst for water purification. Another advantage of this catalyst is its reusability and recyclability, which maintains its stability after several cycles. Finally, the catalytic performance of CuS nanosheets was investigated for degradation of dye mixture (Bismarck Brown and Methyl violet).     

Efficient photocatalytic degradation of rhodamine-B by Fe doped CuS diluted magnetic semiconductor nanoparticles under the simulated sunlight irradiation

The present work is planned for a simple, inexpensive and efficient approach for the synthesis of Cu_1-xFe_xS (x = 0.00, 0.01, 0.03, 0.05 and 0.07) nanoparticles via simplistic chemical co-precipitation route by using ethylene diamine tetra acetic acid (EDTA) as a capping molecules. As synthesized nanoparticles were used as competent catalysts for degradation of rhodamine-B organic dye pollutant. The properties of prepared samples were analyzed with energy dispersive analysis of X-rays (EDAX), X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-visible optical absorption spectroscopy, Fourier transform infrared (FTIR) spectra, Raman spectra and vibrating sample magnetometer (VSM). EDAX spectra corroborated the existence of Fe in prepared nanoparticles within close proximity to stoichiometric ratio. XRD, FTIR and Raman patterns affirmed that configuration of single phase hexagonal crystal structure as that of (P6₃/mmc) CuS, without impurity crystals. The average particle size estimated by TEM scrutiny is in the assortment of 5–10 nm. UV-visible optical absorption measurements showed that band gap narrowing with increasing the Fe doping concentration. VSM measurements revealed that 3% Fe doped CuS nanoparticles exhibited strong ferromagnetism at room temperature and changeover of magnetic signs from ferromagnetic to the paramagnetic nature with increasing the Fe doping concentration in CuS host lattice. Among all Fe doped CuS nanoparticles, 3% Fe inclusion CuS sample shows better photocatalytic performance in decomposition of RhB compared with the pristine CuS. Thus as synthesized Cu_0·97Fe_0·03S nanocatalysts are tremendously realistic compounds for photocatalytic fictionalization in the direction of organic dye degradation under visible light.     

Fe2BiTaO7纳米催化剂的组织结构及光催化性能

用固相反应合成法合成了光催化剂Fe2BiTaO7,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究。结果表明Fe2BiTaO7为立方晶系烧绿石结构,空间群为Fd3m,禁带宽度为1.72 e V。通过比较Fe2BiTaO7、P25TiO2、掺氮Ti O2和Bi2In Ta O7的可见光光催化降解罗丹明B,发现Fe2BiTaO7降解效果及催化活性均高于其它催化剂,并且Fe2BiTaO7降解罗丹明B效率是掺氮二氧化钛的1.5倍。Fe2BiTaO7降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.022 93 min-1。研究了罗丹明B可能的降解路径和Fe2BiTaO7在可见光下降解苯酚的效果。Fe2BiTaO7(可见光)光催化剂系统适用于纺织工业废水处理。     

Fe2BiTaO7纳米催化剂的组织结构及光催化性能

用固相反应合成法合成了光催化剂Fe₂BiTaO₇,通过XRD、SEM、TEM、紫外-可见漫反射等表征方法对其组织结构及光催化性能进行了研究.结果表明Fe₂BiTaO₇为立方晶系烧绿石结构,空间群为Fd₃m,禁带宽度为1.72eV.通过比较Fe₂BiTaO₇、P₂₅TiO₂、掺氮TiO₂和Bi₂InTaO₇的可见光光催化降解罗丹明B,发现Fe₂BiTaO₇降解效果及催化活性均高于其它催化剂,并且Fe₂BiTaO₇降解罗丹明B效率是掺氮二氧化钛的1.5倍.Fe₂BiTaO₇降解罗丹明B的曲线符合一级动力学,一级动力学常数为0.02293 min^-1.研究了罗丹明B可能的降解路径和Fe₂BiTaO₇在可见光下降解苯酚的效果.Fe₂BiTaO₇(可见光)光催化剂系统适用于纺织工业废水处理.     

A novel approach for the synthesis of visible-light-active nanocrystalline N-doped TiO2 photocatalytic hydrosol

A visible-light-active nitrogen doped nanocrystalline titanium dioxide (N–TiO₂) hydrosol was prepared by precipitation–peptization method and following with hydrothermal crystallization at 110 °C holding for 6 h. XPS results show that nitrogen ions have been doped into the TiO₂ lattice successfully and the UV–Vis absorption spectra indicate that the light absorption edge of the N-doped TiO₂ has been red-shifted into visible light region. The photocatalytic performance of the N-doped TiO₂ thin film prepared from the synthesized hydrosol was evaluated by photodegrading the gaseous formaldehyde (HCHO) under visible light irradiation. The photodegradation ratio of HCHO reached up to 90% within 24 h and the degradation ratio was stable for ten degradation cycles, indicating the prepared hydrosol has good reusable performance in photodegrading gaseous pollutants.     

Ag2S或CuS掺杂的Zn0.5Cd0.5S纳米晶体：溶剂热法合成及光致发光性能

以异丙醇为溶剂,醇热法制备Zn_0.5Cd_0.5S和Ag₂S或CuS掺杂的Zn_0.5Cd_0.5S纳米晶体,考察了这些纳米晶体在可见光区域的光致发光性能。结果表明,反应温度和反应时间、掺杂剂的浓度和种类对Zn_0.5Cd_0.5S的发光性能有很大的影响,相比未掺杂Zn_0.5Cd_0.5S纳米晶体而言,Ag₂S或CuS掺杂后其光致发光强度明显增强、半高宽更宽。     

PO43-掺杂Bi2O2CO3/Bi0的制备及其可见光催化性能

构建氧空位以及附着金属单质Bi(Bi⁰)是增强半导体材料光吸收性能、促进半导体光生载流子分离的有效方法。通过简单的共沉淀法及氢气热还原成功制备了PO₄^3-掺杂Bi₂O₂CO₃附着Bi⁰(Bi-P-BOC)的可见光催化剂,并对其在可见光下催化降解氧氟沙星(OFX)的性能及机理进行了研究。材料表征结果表明BOC随着PO₄^3-的均匀掺杂,可见光吸收能力增强,表面缺陷增多,比表面积增大。而随着氢气热还原,BOC表面形成Bi⁰的同时也原位构建了大量的氧空位。可见光催化性能测试表明,Bi-P-BOC可以在180 min内降解约85%的OFX,降解速率为0.013 0 min^-1,是BOC降解速率的8倍。Bi-P-BOC光催化降解机理表明其具有更好的可见光吸收能力,Bi⁰以及氧空位的存在促进了光生载流子的分离,h⁺是其...     

Reforming of Rice Ash Waste by Incorporated Nanotitania in Silica Framework for Photo-catalytic Treatment of Wastewater

The nano-composites based on the burnt rice straw waste, reformed by nano-TiO₂ and copper phthalocyanine (CuPc), namely, RSA-TiO₂, RSA-CuPc, and RSA-TiO₂-CuPc were prepared by a mechano-chemical method. The as-prepared composite systems were characterized by adopting FE-SEM, TEM, XRD, FTIR, SBET, and optical techniques. Their photo-catalytic performance in the degradation of methylene blue dye was evaluated under visible light irradiation. The co-existence of the two components in RSA, SiO₂ and organic carbon, plus the inherently intimate contact between nano-TiO₂ and CuPc could improve the photo-degradation of MB dye. The complete degradation of MB dye was achieved by using RSA-TiO₂ (50) nano-composite and the time is taken for 50% degradation of a dye is 53 min under visible light radiation. The kinetic study revealed that photo-degradation of MB follows a pseudo-first-order reaction mechanism, where the kinetic rate constant was 0.013 min⁻¹.