Y2O3:Eu纳米晶的硝基取代苯甲酸配合物固相热解制备和性能

以苯甲酸、邻硝基苯甲酸、间硝基苯甲酸、对硝基苯甲酸、3，5－二硝基苯甲酸等为配体制备了Y^3 、Eu^3 二元配合物，配合物中Y^3 与Eu^3 的摩尔比为9：1，利用这些配合物的爆炸式热分解特性通过固相热解反应制备了一系列Y2O3：Eu纳米晶。透射电镜观察，可以看出所得纳米晶呈球形，粒度介于40－60nm，X射线衍射分析表明实验所得纳米晶属立方晶系，粒径与电镜观察所得结果基本一致；Eu^3 的引入并不影响Y2O3的晶相组成；配体类型对纳米晶的结构没有显著影响，不过相对于硝基取代苯甲酸配合物，苯甲酸配合物热解所得Y2O3：Eu纳米晶团聚严重；退火温度显著影响纳米晶粒度，退火温度高，纳米晶粒度大，反之亦然。荧光光谱测定表明所有Y2O3：Eu纳米晶具有相似的发光行为，其中以苯甲酸配合物分解所得Y2O3：Eu纳米晶发光性能最为优越。     

热分解法制备Y_2O_2S∶Eu~(3+)纳米粒子(英文)

采用热分解法和硫熔法分别合成了纳米Y2O2S∶Eu3+和体相Y2O2S∶Eu3+。其中硫氧化钇纳米粒子的制备是以水热法合成的Y(OH)3为前驱体,随后在激活剂和硫的共同作用下焙烧得到的。结果表明,所得Y2O2S∶Eu3+为单一纯相纳米粒子,粒径分布集中,大小约80nm,而前驱体Y(OH)3为纳米棒状,形貌上的这一巨大变化是由激活剂和硫粉在高温煅烧过程所形成的熔融物的腐蚀作用造成的。荧光光谱分析表明,Eu3+能有效地掺入硫氧化钇基质中,并具有良好的发光性能。此外,还探讨了纳米粒子的形成机理。     

Y_2O_3∶Eu~(3+)纳米线阵列的制备与表征

Y2 O3∶ Eu3+红色荧光粉由于色纯度高、化学性质稳定和量子效率接近 1 0 0 %而广泛用于荧光灯和投影电视等方面 .近年来 ,Y2 O3∶Eu3+的大量研究工作主要集中于纳米粉末的制备方法及其与体相材料不同的发光特性 [1～ 3] .最近 ,有关 Y2 O3∶ Eu3+及其稀土化合物的纳米管、纳米线和纳米带一维材料的制备成为研究热点 . Wu Changfeng等[4 ,5] 利用表面活性剂合成了 Y2 O3∶ Eu3+纳米管 .激光格位选择激发测试结果表明 ,Eu3+在纳米管中占据 3个不同的格位 ,其 61 1 nm处的红色发光峰出现了宽化 .HeYu等 [6 ] 采用水热法及退火处理制备出…     

纳米Y_2O_3∶Eu~(3+)超声辐射沉淀制备及其性能研究

采用超声辐射沉淀法以草酸为沉淀剂制备出纳米Y2 O3 ∶Eu3 + 粉体。利用XRD、TG DTA、TEM等手段对其进行了表征 ,并对其光谱特性进行了研究。结果表明 :将超声辐射引入普通沉淀法中 ,可显著提高粉体性能 ,所得纳米Y2 O3 ∶Eu3 + 为球形 ,粒度分布均匀 ,粒径约为 38～ 4 5nm ,与微米晶相比 ,该纳米晶的发射光谱发生蓝移 ,激发光谱发生红移。     

稀土纳米复合氧化物RE_2O_3∶Eu(RE=Y,Gd)的制备及特性

以甘氨酸辅助的燃烧法和非晶态稀土DTPA配合物前驱体热分解法制备了Y2 O3 ∶Eu和Gd2 O3 ∶Eu纳米材料。X射线衍射表明燃烧法和配合物前驱体热分解法制备的纳米Y2 O3 ∶Eu均为立方相 ,而Gd2 O3 ∶Eu纳米材料则随制备条件不同可得到立方相或单斜相两种产物 ,发射光谱证实了这一结论。通过透射电子显微镜、扫描电子显微镜对不同方法制备的纳米材料的尺寸、形貌也进行了表征     

LaPO4∶Eu3+—Fe3O4光-磁复合材料的合成与性能研究

采用2步水热法合成了LaPO4∶Eu3+-Fe3O4复合材料.在LaPO4∶Eu3+-Fe3O4复合材料中,LaPO4∶Eu3+为单斜晶相,呈纳米棒状,纳米棒的直径和长度分别为20~100nm和0.2~1μm;Fe3O4为正交晶相、呈20~30nm的颗粒状,Fe3O4粒子紧紧附着在LaPO4∶Eu3+纳米棒的表面;样品的磁性和发光性质研究表明所合成的LaPO4∶Eu3+—Fe3O4复合材料既具有发光性质又具有磁性.     

Y2O3:Eu3+纳米线阵列的制备与表征

Y2O3:Eu3+红色荧光粉由于色纯度高、化学性质稳定和量子效率接近100%而广泛用于荧光灯和投影电视等方面.近年来,Y2O3:Eu3+的大量研究工作主要集中于纳米粉末的制备方法及其与体相材料不同的发光特性[1～3].最近,有关Y2O3:Eu3+及其稀土化合物的纳米管、纳米线和纳米带一维材料的制备成为研究热点.Wu Changfeng等[4,5]利用表面活性剂合成了Y2O3 : Eu3+纳米管.激光格位选择激发测试结果表明,Eu3+在纳米管中占据3个不同的格位,其611 nm处的红色发光峰出现了宽化.He Yu等[6]采用水热法及退火处理制备出了Y2O3:Eu3+纳米带,发现Eu3+的发射峰不仅宽化,而且出现了625 nm的新峰.Li Yadong等[7～9]采用水热法制备了稀土氧化物、硫氧化物和氢氧化物等的纳米线和纳米管,并探索了其形成机理,同时发现Y2O3S : yb3+,Er3+具有上转换的性质.     

Y2O3∶Eu3+发光薄膜的溶胶-凝胶法制备、表征及图案化

采用Pechini溶胶-凝胶法制备了纳米级Y2O3∶Eu3+发光薄膜, 同时, 通过软石印技术得到了条纹宽度为5～60 μm的Y2O3∶Eu3+图案化发光薄膜. 通过X射线衍射 (XRD)、付里叶变换-红外光谱 (FT-IR)、原子力显微镜(AFM), 光致发光(PL)光谱及寿命等方法对得到的发光薄膜进行了表征. XRD结果表明500 ℃时薄膜开始结晶, 900 ℃已结晶完全, 得到了立方相的产物. 图案化的条纹在烧结的过程中发生了明显的收缩(50%). Y2O3基质向掺杂的稀土离子Eu3+发生了有效的能量传递, 使得Eu3+显示出5D0-7FJ(J=0, 1, 2, 3, 4)特征发射. 寿命和光致发光光谱的研究表明, 发光强度随着温度的升高而增强.     

纳米晶Y_2O_3∶Eu~(3+)的合成及其热分析动力学

以Y(NO3)3、Eu2O3、CO(NH2)2为原料,使用超声波作用下的均匀沉淀法合成了纳米晶荧光粉Y2O3∶Eu3+。利用不同升温速率的热重及差热分析研究了纳米晶Y2O3∶Eu3+的合成动力学及晶粒生长动力学。研究表明,纳米晶Y2O3∶Eu3+的前驱体分解过程可分为3个步骤,利用Doyle-Ozawa法和Kissinger法分别计算了各个反应阶段的表观活化能,用Kissinger法确定每个反应阶段的反应级数和频率因子,并给出了各个阶段的动力学方程。根据晶粒生长动力学理论计算纳米荧光粉Y2O3∶Eu3+晶粒生长活化能为17.80kJ·mol-1,表明热处理过程中纳米晶粒的长大为扩散生长机制。     

Gd2O3∶Eu3+纳米棒的制备与发光性能

在表面活性剂辅助的水热条件下合成出尺寸均一的Gd2O3∶Eu3+纳米棒, 对其结构和荧光性质进行了表征, 并对其生长机理进行了初步讨论. XRD结果表明, 水热前驱体样品为六方晶相的Gd(OH)3, 经过灼烧之后样品为立方相的Gd2O3. TEM照片表明, 所得样品为直径60 nm、长度约600 nm的纳米棒. 荧光光谱表明, 在波长为254 nm 的紫外光激发下, Gd2O3∶Eu3+纳米棒产生了不同于前驱体的特征红光发射, 对应于Eu3+ 的5D0-7F2跃迁, 表明Gd2O3是红色发光材料的良好基质.     

纳米(Y0.95Eu0.05)2O3及其SiO2气凝胶介孔组装体的制备与光致发光

采用尿素溶胶法合成(Y0.95Eu0.05)2O3纳米粉,用超临界干燥技术制备了n-(Y0.95Eu0.05)2O3/SiO2气凝胶介孔组装体。结果表明,当Y3+∶　Eu3+=20∶　1,均相反应时间为4 h,且经680℃、 4 h灼烧热处理后得到的n-(Y0.95Eu0.05)2O3中, 光致发光强度最大（发光峰位于612 nm),以Si与 2Y摩尔比为1∶　7的n-(Y0.95Eu0.05)2O3/SiO2气凝胶介孔组装体,经同样条件热处理后,光致发光强度达不到n-(Y0.95Eu0.05)2O3的红光发射强度,而且峰位出现红移（发光峰在616 nm）。对产生上述发光强度减弱和峰位红移现象进行讨论。     

4-[(1,3-二氧代丁基)氨基]苯甲酸稀土配合物的合成、表征及发光性质

在乙醇体系中,由主配体4-[(1,3-二氧代丁基)氨基]苯甲酸(H2L,C11H11NO4)、稀土硝酸盐及辅助配体邻菲啰啉(phen)反应合成了两个系列8个配合物[Ln2(L)3(H2O)4]n(Ln=Sm(1),Eu(2),Tb(3),Dy(4));[Ln2(NO3)2(L)2(phen)2]n(Ln=Sm(5),Eu(6),Tb(7),Dy(8))。用元素分析、红外光谱、摩尔电导、热重分析进行表征,确定了产物的化学组成,推断了相应的结构。测定了室温时固体产物的激发和发射光谱,结果表明:由主辅配体共同配位的三元配合物的发光强度好于无辅助配体参与的二元配合物。测定了三元配合物的荧光寿命,其中铕和铽配合物显示较长的荧光寿命。     

Synthesis and Luminescent Properties of Nano-scale Y2Si2O7:Re3+ (Re=Eu,Tb) Phosphors via Sol-Gel Method

By using metal nitrates as starting materials and citric acid as a complexing agent, Y2Si2O7:Re3+ (Re=Eu, Tb) phosphors were prepared by a sol-gel method. X-ray diffraction was employed to characterize the resulting samples. The results of XRD indicate that the ff-Y2Si2O7 nanocrystal with size of 27 nm is obtained at 1000 oC and the doping ion content does not influence the structure. The excitation spectra in the UV and VUV ranges and the emission spectra of Re3+ doped samples were measured. The excitation spectra in the VUV range is due to absorption of host, that in the UV range is ascribed to absorption transitions from 4f to 5d state of the Tb3+ and the charge transfer in the Eu3+-O2- bond. The spectral energy distribution of the Tb3+ emission depends strongly on the Tb3+ concentration. The dependence of photoluminescence intensity on Re3+ concentration is also discussed in detail. The fluorescent decay curves at room temperature were measured and analyzed.     

Optical properties of nanocrystalline Y2O3:Eu depending on its odd structure

The structure of nanocrystalline Y2O3:Eu prepared by a combustion reaction was analyzed by XRD and high-resolution electron microscopy. Compared with a large-scale particles, 5-nm Y2O3:Eu particles presented as distorted crystallite and rough surfaces. Luminescent and absorption properties of nano-Y2O3:Eu showed remarkably particle size effects. At Y2O3:Eu particle sizes smaller than 10 nm some new results were observed: (a) a red shift of the charge-transfer-state absorption; (b) new emission bands of Eu3+ in the 5D0 --> 7F2 region; (c) luminescent decay of energy level 5D0 of Eu3+ turning to a two-step exponential; and (d) a pronounced increase in quenching concentration and much lower phonon density compared with those of the bulk material. All these phenomena can be attributed to the effect of the softened lattice and surface state of the nanomaterial. The latter was confirmed by stronger excitation by the host absorption after the surface modification.     

Synthesis and cofluorescence of Eu(Y) complexes with salicylic acid and o-phenanthroline

A series of dinuclear complexes of salicylic acid (HSal) and o-phenanthroline (Phen) with different molar ratios of Eu3+ to Y3+ have been synthesized. Their compositions are Eu(x)Y(1-x) (Sal)3(Phen) (x = 0 to approximately 1). Their UV spectra, IR spectra, and fluorescence spectra were studied. The UV spectra of the complexes reflect essentially absorption of the ligands for the fact that no obvious change of wavelength and band shape is found between the spectra of the complexes and that of the ligands except slight red shift. The IR absorption spectra indicate that salicylic acid is coordinated to the rare earth ions and chemical bonds are formed between rare earth ions and nitrogen atoms of o-phenanthroline. The fluorescence spectra of the complexes indicate that the fluorescence emission intensity of europium ion was enhanced by the addition of Y3+, which is referred to as cofluorescence. These facts show that not only the ligands but also the yttrium complex can transfer the absorbed energy to Eu3+ ion in the complexes. Formation of polynuclear complexes appears to be responsible for cofluorescence.     

九配位钇(Ⅲ)-氨三乙酸配合物K3[Y(NTA)2(H2O)]·6H2O的合成及分子结构

In this paper we describe the molecular and crystal structures of the K₃[Y(NTA)₂(H₂O)]· 6H₂O(H₃NTA=nitrilotriacetic acid). The crystal data are as followsmonoclinic system, C2/c space group, a=1.5268(3)nm,b=1.2833(3)nm,c=2.6079(5)nm,β =96.03(3)°,V=5.0815(18)nm³,Z=8,M=708.68,Dc=1.852gcm^-3,μ =2.875mm^-1,F(000)=2880.The final R1 and wR2 are 0.0636 and 0.1523 for 4264 [I >2.0σ (I)] unique reflections and 0.1178 and 0.1651 for all 4364 reflections,respectively.In the title complex, the anion [Y(NTA)₂(H₂O)]^3- has a nine-coordination structure with distorted monocapped square antiprism. Each group acts as a tetradentate ligand with three Oatoms and one Natom and a H₂O molecule caps a quadrilateral face as a ligand.It can be known that the Y(Ⅲ) ion can form a high-coordinate compound with aminopolycarboxylic acid ligands because it has a larger ionic radius (0.104nm).     

Preparation and thermal stability of trioxalatocobaltates of bivalent metals KM2+ [Co(C2O4)3]·xH2O

Trioxalatocobaltates of bivalent metals KM²⁺[Co(C₂O₄)₃]·x H₂O, with M²⁺ = Ba, Sr, Ca and Pb, have been prepared, characterized and their thermal behaviour studied. The compounds decompose to yield potassium carbonate, bivalent metal carbonate or oxide and cobalt oxide as final products. The formation of the final products of decomposition is influenced by the surrounding atmosphere. Bivalent metal cobaltites of the types KM²⁺CoO₃ and M²⁺CoO_3—x are not identified among the final products of decomposition. The study brings out the importance of the decomposition mode of the precursor in producing the desired end products.     

纳米Ag@SiO2核壳结构的表面等离子体共振效应对铕配合物的荧光增强作用

分别制备了二氧化硅壳层厚度为10、25和80 nm的三种Ag@SiO₂纳米粒子, 合成了铕与不同比例苯甲酸根(BA)的配合物、铕与1, 10-邻菲罗啉(phen)及2, 2''-联吡啶(bpy)的配合物, 并对其进行表征. 表征结果推测配合物的组成为Eu(BA)_nCl_3-n·2H₂O (n=1, 2, 3)、Eu(phen)Cl₃·2H₂O和Eu(bpy)Cl₃·2H₂O. 配合物的荧光光谱显示, 在加入Ag@SiO₂纳米粒子后, 复合物的荧光强度有不同程度的增加, 这可能是由于表面等离子体共振造成的. 不同硅壳厚度的Ag@SiO₂纳米粒子的荧光增强顺序是25 nm>80 nm>10 nm, 这表明二氧化硅核壳厚度约25 nm时有较强的表面等离子体共振效应. 此外, 在这些复合物中, Eu(phen)Cl₃·2H₂O复合物的增强效果是最强的, 而Eu(BA)_nCl_3-n·2H₂O的增强效果是最弱的. 在三个苯甲酸铕配合物中, Eu(BA)₃·2H₂O的增强效果最弱, 其他两个苯甲酸铕复合物增强效果相对较好. 原因可能是含氮配合物(Eu(phen)Cl₃·2H₂O和Eu(bpy)Cl₃·2H₂O)可以和Ag@SiO₂更好地成键, 而苯甲酸铕配合物和Ag@SiO₂纳米粒子的作用相对较弱. Ag@SiO₂纳米粒子有望应用于增强稀土材料的发光.     

Ce3+,Tb3+,Eu3+共掺杂Sr2MgSi2O7体系的白色发光和能量传递机理

通过正交试验,采用高温固相法制备了Sr2-x-y-zMgSi2O7∶xCe3+,yTb3+,zEu3+系列样品.使用X射线衍射仪和荧光光谱仪表征了样品的物相和发光性质,并讨论了Ce3+-Tb3+-Eu3+共掺杂Sr2MgSi2O7体系中的能量传递过程.实验结果表明,在327 nm波长激发下,所合成荧光粉的发射峰主要位于387 nm(蓝紫)、542nm(绿)和611 nm(红)处;分别以387,542和611 nm为监控波长,所得激发光谱显示荧光粉在327 nm处有最好的激发.在327 nm光激发下,系列样品发光进入白光区.最优化的荧光粉为Sr1.91MgSi2O7∶0.01Ce3+,0.05Tb3+,0.03Eu3+,其色坐标为(0.337,0.313),是一种潜在的发光二极管(LED)用白色荧光粉.