SBA-15负载氧化铁催化剂上乙酸选择加氢制乙醛

制备了一系列SBA-15负载α-Fe₂O₃催化剂.研究了负载量、预还原温度和反应温度对乙酸选择加氢制乙醛反应的活性和选择性的影响.负载催化剂上乙醛的最高产率达到42.7%,比纯α-Fe₂O₃催化剂的32.2%高.催化剂表面Fe₃O₄和Fe⁰共存对提高反应性能有利.该反应有可能遵循Mars-vanKrevelen机理.     

非晶态δ-FeOOH液相合成纳米级α-Fe2O3粉体的历程研究

以非晶态δ-FeOOH为前驱物的弱酸性悬浮液,液相快速合成粒径小于25 nm、准球形、高纯度α-Fe₂O₃粉体.结合XRD, FTIR, TEM, TG/DTA和粒度分析等测试手段,对δ-FeOOH液相相转化为α-Fe₂O₃过程中产物的物相、结构及形貌进行了表征.研究结果表明,非晶态δ-FeOOH属亚稳相,容易向稳定相α-Fe₂O₃及α-FeOOH转化,而α-FeOOH在沸腾回流中会自发地转化为α-Fe₂O₃.     

Fe2O3晶型对Fe基催化剂的CO2加氢性能影响

以共沉淀法制备FeAl母体,采用浸渍法添加Zn、K和Cu助剂制成催化剂,利用低温N2物理吸附、XRD、H2-TPR等手段对FeAl母体和催化剂进行表征,并用固定床反应器考察它们的CO₂加氢反应性能。XRD结果表明,加入Al助剂、并采用无水乙醇洗涤沉淀能促进酌-Fe₂O₃晶相生成,其中,Al₂O₃/Fe₂O₃质量比为10%的母体具有最强的酌-Fe₂O₃衍射峰;加入Al使得母体中的a-Fe₂O₃晶粒粒径变小,引起比表面积明显增大;浸渍助剂过程没有改变上述两种效应。母体比表面积增大提高了助剂Cu的分散度,促进了催化剂还原,但酌-Fe₂O₃晶相的生成才是催化剂的CO₂加氢反应活性被提高的主要原因。     

原位光沉积制备Z型α-Fe2O3/g-C3N4异质结及其可见光驱动光解水产氢性能

采用原位光沉积-煅烧法制得了Z型α-Fe₂O₃/g-C₃N₄异质结复合光催化剂。分别采用透射电子显微镜、X射线衍射、X射线光电子能谱、紫外可见漫反射光谱、荧光光谱以及电化学测试对样品进行了表征,并考察了可见光下光解水产氢活性。结果表明:当α-Fe₂O₃的负载量为2.9%时,α-Fe₂O₃/g-C₃N₄复合光催化剂具有最优的产氢催化活性,产氢速率高达1841.9μmol·g^-1·h^-1,约为g-C₃N₄的3.3倍。光催化性能的提高主要归因于3方面:(1)高温煅烧过程中α-Fe₂O₃的形成,有效促进了氮化碳片层的热剥离,增大了比表面积,从而为光催化反应提供了更多反应活性位;(2)超细α-Fe₂O₃颗粒(5~8 nm)高度均匀地分散在g-C₃N₄表面,并且与其紧密结合,形成了高质量的Z型异质结;(3)Z型异质结不仅有效抑制地了光生载流子的复合,同时极大地保留了g-C₃N₄导带电子的强还原性和α-Fe₂O₃价带空穴的强氧化性。     

具有光催化与光芬顿反应协同作用的2D/2D α-Fe2O3/g-C3N4 S型异质结用于高效降解四环素

构建具有高效电荷迁移效率和丰富活性位点的异质结光催化体系是提升光芬顿反应速率的有效途径。本研究通过简单的水热法合成了2D/2D结构的α-Fe₂O₃/g-C₃N₄ S型异质结光芬顿催化剂,并使用X射线衍射仪技术(XRD)、透射电子显微镜(TEM)、傅立叶变换红外吸收光谱(FTIR)和紫外-可见吸收光谱(UV-Vis)等分析手段对α-Fe₂O₃/g-C₃N₄的晶体结构、微观结构、化学组分和光学性质进行了详细的表征。通过在可见光照射下降解四环素,评测了α-Fe₂O₃/g-C₃N₄的催化活性。结果表明,光催化反应与芬顿反应的协同作用使α-Fe₂O₃/g-C₃N₄ (1 : 1)展现出了优异的光芬顿催化活性：在可见光照射下,仅加入微量的双氧水便可辅助催化剂在20 min内对四环素的降解率达到78%,其降解速率分别是单一的α-Fe₂O₃和g-C₃N₄的3.5倍和5.8倍。α-Fe₂O₃/g-C₃N₄复合材料优异的催化活性得益于在2D/2D S型电荷迁移机制上构建的光芬顿催化体系。2D/2D S型异质结能够显著促进电子和空穴的传输与分离,并为催化剂提供较大的比表面积和丰富的活性位点,同时还能保持复合材料最佳的氧化还原能力。此外,光催化反应促进了Fe³⁺的还原,从而加速了芬顿反应中羟基自由基的产生。总之,本研究为构建高效、稳定的光芬顿催化体系提供了一条简单有效的途径。     

Sn、Ti掺杂改性γ-Fe2O3催化剂结构及NH3-SCR脱硝活性研究

采用共沉淀-微波热解法,制备一系列Sn、Ti掺杂改性γ-Fe₂O₃催化剂样品(γ-Fe_0.95Ti_0.05O_z、γ-Fe_0.95Sn_0.05O_z、γ-Fe_0.95Sn_0.025Ti_0.025O_z),研究Sn、Ti掺杂对γ-Fe₂O₃催化剂SCR脱硝活性的影响,借助XRD、N₂吸附-脱附、EDS及SEM等手段对催化剂晶相、孔结构、表面元素及微观形貌等进行表征分析。结果表明,Sn、Ti掺杂后以无定形态高度分散于γ-Fe₂O₃晶格中,与Fe形成固溶体;单一助剂Ti掺杂制得的γ-Fe_0.95Ti_0.05O_z 最高脱硝效率达98.3%,且在250~400 ℃脱硝效率保持90%以上;Ti掺杂可以细化γ-Fe₂O₃晶粒,优化2~100 nm孔径孔隙结构,抑制α-Fe₂O₃的生成,促使γ-Fe₂O₃形成细致、均匀、独立的球状颗粒,对SCR反应有利;Sn掺杂则使催化剂出现严重烧结现象,导致2~6 nm孔径孔结构贫乏,对SCR脱硝反应不利;在Sn、Ti协同作用下,催化剂表面氧铁原子物质的量比由1.83降至1.33,表面晶格氧显著下降,一定程度上限制了SCR反应速率的提高。     

α-Fe2O3形貌对Au/α-Fe2O3催化一氧化碳氧化反应性能的影响

负载型纳米金催化剂由于其独特的化学性质在一系列氧化反应中受到广泛关注.其中,一氧化碳氧化不仅在实际应用领域(如汽车尾气处理)发挥重要作用,而且作为一种理想的模型反应用以深入研究和理解催化剂的构效关系.为了获得高效的纳米金催化剂,我们需要把金负载到载体上,载体不仅为金的分散提供必要的表面,而且还会和金产生相互作用,这种金属-载体相互作用对金的氧化态,金颗粒大小及其热稳定性均有重要影响.金属氧化物是负载金最常用的载体.为了提高纳米金催化剂的性能,需要调变金属氧化物的性质.常用的策略是调控金属氧化物的组成、晶相以及晶粒大小.此外,对金属氧化物的形貌进行精细调控也是一种重要的方法,因为具有不同形貌的氧化物可能会暴露出不同的晶面,而且可能具有不同的缺陷位点.α-Fe₂O₃是一种热稳定性强而且对环境友好的载体,可是有关其形貌对负载金催化剂在一氧化碳氧化反应中性能影响的研究尚不充分.因此,本文采用水热法合成了具有纳米球和纳米棒两种形貌的氧化铁,并采用沉积-沉淀的方法将金纳米颗粒负载于其表面.高分辨透射电镜照片显示,和氧化铁纳米球(α-Fe₂O₃(S))相比,氧化铁纳米棒(α-Fe₂O₃(R))的表面更为粗糙,具有更多的缺陷位点.Au和α-Fe₂O₃(R)之间有更强的金属载体相互作用,导致纳米棒氧化铁上的金纳米颗粒更小而且多呈半球形.相比之下,纳米球氧化铁上的金纳米颗粒较大,多呈球形,且分布不均匀.反应结果表明,Au/α-Fe₂O₃(R)具有更高的一氧化碳氧化活性.对反应后的催化剂进行表征发现,Au/α-Fe₂O₃(R)上金颗粒烧结程度较低,平均粒径从1.5增至2.4 nm,而Au/α-Fe₂O₃(S)上金颗粒烧结较为严重,平均粒径从2.0 nm增加到4.0 nm.氢气程序升温还原结果表明,Au/α-Fe₂O₃(R)具有更强的还原性,这也促进了其催化活性的提高.     

CeO2-Al2O3负载金催化剂用于水煤气变换反应的催化活性

采用浸渍法和沉积 沉淀法制备了CeO₂-Al₂O₃复合氧化物,比较了复合氧化物负载纳米金催化剂对水煤气变换反应的催化活性。通过N2物理吸附、XRD、TEM、H₂-TPR等表征手段对复合氧化物及其负载金催化剂的物相和结构进行分析,发现复合氧化物的制备方法及其焙烧温度对其比表面积、孔结构及水煤气变换反应活性有明显的影响。与沉积 沉淀法相比,浸渍法制备的CeO₂-Al₂O₃复合氧化物具有较大的CeO₂晶粒尺寸,经500℃焙烧后再负载金,所得催化剂具有更高的活性,250℃时CO转化率可达78.1%。     

γ-Fe2O3纳米纤维的丙酮敏感特性

采用静电纺丝法制备了PVP/FeC₆H₅O₇复合纳米纤维, 并将复合纤维在500 ℃高温烧结3 h, X射线衍射分析(XRD)表明, 烧结后的产物为正尖晶石结构的γ-Fe₂O₃晶体. 扫描电子显微镜(SEM)观测结果表明, 制得了直径均匀、 连续的复合纳米纤维, 其平均直径约为1000 nm; 烧结后的γ-Fe₂O₃纳米纤维保持了其连续性, 但纤维发生了收缩, 直径较烧结前小, 平均约为600 nm. 比表面积分析表明, γ-Fe₂O₃纳米纤维比表面积为57.18 m²/g. 气敏性能测试结果表明, 230 ℃为γ-Fe₂O₃纳米纤维检测丙酮气体的最佳工作温度. 在此温度下, γ-Fe₂O₃纳米纤维对丙酮气体表现出高响应度[S=6.9, c(Acetone)=7.88×10⁴ mg/m³]和线性度(7.88×10²~1.58×10⁵ mg/m³浓度范围内). 同时, γ-Fe₂O₃纳米纤维气体传感器件还表现出良好的长期稳定性.     

ZnCr基催化剂煅烧温度对异丁醇合成性能的影响

研究了煅烧温度对ZnCr基催化剂合成异丁醇性能的影响。结果表明,随着煅烧温度的升高,催化剂的活性和产物分布都发生了较大的变化。催化剂在较低的温度下煅烧,液相产物中醇主要是甲醇和异丁醇;在较高的温度下煅烧,液相产物醇的分布符合A-S-F方程。用BET、XRD、H₂-TPR、XPS等技术手段对催化剂织构参数、体相结构、还原性能、表面组成进行表征。结果表明,在300℃煅烧时,催化剂中的ZnO和Cr₂O₃未完全形成非计量尖晶石Zn_xCr_2/3(1-x)O;400℃煅烧时,催化剂中形成了最多量非计量尖晶石Zn_xCr_2/3(1-x)O;当煅烧温度高于400℃时,随着煅烧温度进一步升高,非计量尖晶石Zn_xCr_2/3(1-x)O逐步发生了分解,生成了更多量的ZnO和Cr₂O₃,导致催化剂的活性随之下降。进一步证明了非计量尖晶石Zn_xCr_2/3(1-x)O是该催化反应活性相。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.