Fe3O4磁液的悬浮率测定及稳定性研究

The paper first reported the preparation of ultrafine Fe₃O₄ powder about 8～10nm by improved chemical pre-cipitation method， then turned it into magnetic fluid. The phase analysis， morphology， ultrafine powder size and magnetic property were measured by XRD， TEM and vibrating sample magnetometer(VSM)，respectively. In ad-dition， a new method ， by analyzed the suspending percentage of Fe₃O₄ powder， was introduced to study the effects of concentration， pH value， centrifugal rate and time on the stability of the magnetic fluid.     

磁性Fe3O4 /壳聚糖的化学修饰及包覆机理研究

Nano-sized Fe₃O₄ powder was prepared through an Oxygenation-Hydrothermal method. The chitosan magnetic complex was prepared by coating chitosan on the surface of Fe₃O₄ powders through Microlatex-Crosslinking Method. The product was characterized by IR， XRD， TEM， Vibrating Sample Magnetometer (VSM)， TG methods. Results show that the as-prepared powder is 25 nm in size and shows supermagnetism. The content of magnetite in microspheres is 37.8%. The mechanism for the coating reaction of chitosan to Fe₃O₄ nanoparticles is also suggested.     

双层表面活性剂分散制备水基磁流体

Fe₃O₄ magnetic particles were synthesize by chemical co-precipitation. Sodium oleate and poly(ethylene glycol)-4000 were used as bilayer surfactants to envelope the ultra-fine Fe₃O₄ particles. Then stabilized water base magnetic fluid was obtained. Experiments indicated that surfactants and pH value of the solution had great effect on the stability and size of the magnetic fluid when Fe₃O₄ particles were synthesized and enveloped. It was the first time to employ this method to prepare magnetic fluid. Using laser diffraction particle size analyzer we found that the average diameter of magnetic fluid was lessen than 84 nanometer. Its magnetization was measured on magnetic balance and the result amounted to 3.84×10³A·m^-1. Further more， XRD and IR analysis measurements were employed to substantiate the existence of Fe₃O₄ and surfactant structure. The magnetic fluid can be used as tar-geted-part of nanometer targeted drug delivery system.     

纳米Mn-Zn铁氧体的制备和研究

Nanosize manganese zinc ferrites were fabricated by hydrothermal precipitation route using Fe₂(SO₄)₃, ZnSO₄·7H₂O, MnSO₄·H₂O as material, then some calcinated at 500 ℃ and studied by XRD, TEM, IR and VSM. The results showed that the products were spinel crystal structure and uniformly sized nanoparticles (15～25 nm) with little aggregation. The analysis of IR showed that the superficial water can be eliminated, but that was embedded in crystal lattice can not be removed by calcinating. The effect Zn content x on the lattice (a) of nanosize Mn_1-xZn_xFe₂O₄ was also discussed. The lattice of nanosize Mn_1-xZn_xFe₂O₄ decreases with x increasing; and its value deviated the standard lattice (a₀) of normal size manganese zinc ferrites. A lot of water was absorbed during the hydrothermal process owing to the large surface of nanosize particles. The change of magnetic properties of Mn_xZn_1-xFe₂O₄ with x increasing was studied: nanosize Mn_xZn_1-xFe₂O₄ particles synthesized by us exhibited peculiar magnetic properties curve with Zn content (x) increasing, Superparamagnetic behaviors of the synthesized ZnFe₂O₄ samples were confirmed by magnetic characterization, which can be explained by the difference between the distribution of the metal ions (Mn²⁺, Zn²⁺ and Fe³⁺) among the tetrahedral (A) and the octahedral (B) sites of nanosize ferrite and that of bulk ferrite.     

锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

电镀烧结法制备Ti/SnO2-Sb2O4电极的研究

The Ti/SnO₂-Sb₂O₄ electrode has been prepared by the electroplate-sinter method. The effect of SbCl₃ adding amount and sintering temperature on its electrode lifetime and oxygen evolution potential were investigated by means of EDX, SEM and XRD analysis. The results indicated that the electrode appeared the best performance when the SbCl₃ adding amounts was 0.2g and the sintering temperature was 550℃. In optimized conditions Ti substrate was entirely covered by SnO₂-Sb₂O₄ and the combinations among them were tight. Due to the use of electroplate method, the electrical conductivity, the oxygen evolution potential and the electrode lifetime were increased, so the elec-tro-catalytic activity and the electrochemical stability of the prepared electrode were found to be superior.     

(Ag0.9Li0.1)(Nb1-yTay)O3纳米瓷粉的制备与表征

A series of (Ag_0.9Li_0.1)(Nb_1-yTa_y)O₃ ceramic powders were prepared by an aque-chemical method. The optimized calcination temperature, time and crystal lattice were studied by TG-DTA, IR, XRD and TEM. The results show that the optimized conditions were calcination of the precursor at 800 ℃ for 2 h. The ceramic powder thus prepared was rhombohedral with the average grain size of 48 nm.     

无机-高分子-无机多组分核壳纳米复合材料的制备和表征

Fe₃O₄ nanoparticles were prepared by chemical co-precipitation using palmitic acid as surfactant， then a uniformly dispersed system of Fe₃O₄@Polymethylmethacrylates(PMMA) core-shell structure was obtained. Furtherm-ore， polymethylmethacrylates(PNIPAM) was encapsulated on the surface of the Fe₃O₄@PMMA core-shell nano-structure to get Fe₃O₄@PMMA@PNIPAM double shell-core composite structure. After that， the Ag nano-particles were assembled on the surface of Fe₃O₄@PMMA@PNIPAM taking advantage of coordination reaction between Ag⁺ and nitrogen atom on the amide group of PNIPAM. The magnetism of composites is convenient for the catalyst separation from the solution.     

介稳态氧化钨超微粉体的水热合成与光致变色性质研究

Under hydrothermal conditions, the superfine powders of cubic pyrochlore-type of tungsten oxide and hexagonal tungsten bronze were obtained by using Na₂WO₄·2H₂O as the starting material. The products were characterized by XRD, TG, IR, UV and EPMA, respectively. The effects of the pH value, the acid concentration, reaction temperature and time on the structure and particle size of products were investigated in detail. The conditions for the preparation of superfine powders of tungsten oxide were optimized. The pH 2.5～4.5 of the reaction system led to the formation of a pyrochlore phase and pH 0.5～2.0 gave the hexagonal tungsten bronze structure. The photochromism property of the hexagonal tungsten bronze was studied. The results show that pyrochlore and bronze phases are decomposed at 300 ℃ and 450 ℃, respectively. With the increasing of temperature, the structure of the two oxides changes. The pyrochlore-type powder changes completely into triclinic Na₂W₄O₁₃ around 500 ℃, while the bronze phase into a mixture of Na₂W₆O₁₉ and triclinic WO₃ at 550 ℃. The powder of the hexagonal tungsten bronze showed better photochromism property.     

球形Gd2O3∶Eu纳米发光材料的制备

Spherical nanometer Gd₂O₃∶Eu luminescent materials were prepared by homogeneous precipitation method, and the properties were studied also. TG, FTIR and XRD analysis showed that the precursor was carbonate, the cubic Gd₂O₃was obtained after calcination. TEM photographs indicated that the samples were spherical and well dispersed with nanometer and submicrometer size of 200～300 nm which is the nanoparticles’ aggregate. The mechanics of agglomerating growth is also discussed. ED photograph showed that the particle was crystalline. The PL analysis exhibited that CTB band of nanometer Gd₂O₃∶Eu was of 17 nm red shift to bulk materials, and the emission peak was broadened due to the surface and interface effect of nanocrystals.     

多核超顺磁性Ni0.5Zn0.5Fe2O4/SiO2催化载体的制备与表征

采用化学共沉淀法与溶胶-凝胶法相结合, 在制备过程中改变磁性纳米粒子和TEOS的引入方式, 成功地制备了多核超顺磁性Ni0.5Zn0.5Fe2O4/SiO2催化剂载体. 采用透射电子显微镜(TEM)、氮气吸附、X射线衍射(XRD)及物理性质综合测试系统(PPMS)对样品进行了表征, 利用永磁铁对载体的分离效果进行了验证. 研究结果表明, 改进制备方法后, 制备的载体比表面积明显增大, 这有利于催化剂在载体上的分散与固载; 样品的饱和磁化强度明显增加, 表明样品具有很好的磁响应能力, 有利于催化剂的分离, 同时, 载体的超顺磁特性也有利于液相催化体系中催化剂的分散.     

核壳结构Ni0.5Zn0.5Fe2O4/PANI复合纳米材料的制备及表征

采用微乳液法制备出Ni0.5Zn0.5 Fe2O4纳米颗粒以及Ni0.5Zn0.5Fe2O4/PANI核壳结构复合纳米材料,借助FT-IR、XRD、SEM、TEM、VSM等分析手段研究了材料的形貌、结构与磁性能.结果表明:得到的Ni0.5Zn0.5Fe2O4纳米颗粒平均粒径为20hm左右,Ni0.5Zn0.5 Fe2O...     

Magnetic hard/soft nanocomposite ferrite aligned hollow microfibers and remanence enhancement

The nanocomposite SrFe(12)O(19)/Ni(0.5)Zn(0.5)Fe(2)O(4) ferrite aligned hollow microfibers with the hollow diameter to the fiber diameter estimated about 3/5 have been prepared by the gel precursor transformation process. The nanocomposite binary ferrites with different mass ratios are formed after the precursor calcined at 900°C for 2h, fabricating from SrFe(12)O(19) nanoparticles and Ni(0.5)Zn(0.5)Fe(2)O(4) nanoparticles with a uniform phase distribution. These nanocomposite ferrite microfibers show a combination of magnetic characteristics for the hard (SrFe(12)O(19)) and soft (Ni(0.5)Zn(0.5)Fe(2)O(4)) phase with an enhanced remanence owing to the exchange-coupling interactions. The aligned microfibers exhibit a shape anisotropy.     

纳米结晶体Ni0.5Zn0.5Fe2O4对高氯酸铵热行为及分解反应动力学的影响

采用差示扫描量热法(DSC)、热重和微分热重(TG-DTG)及固相原位反应池/快速扫描傅立叶变换红外联用技术(hyphenated in situ thermolysis/RSFTIR)研究了纳米结晶体Ni_0.5Zn_0.5Fe₂O₄与高氯酸铵(AP)组成的混合物的热行为和分解反应动力学。结果表明：Ni_0.5Zn_0.5Fe₂O₄使得AP的低、高温分解放热峰温分别提前17.44 K和27.74 K,并使得对应的分解热分别增加3.7 J·g^-1和193.7 J·g^-1。Ni_0.5Zn_0.5Fe₂O₄并不影响AP的晶转温度和晶转热。Ni_0.5Zn_0.5Fe₂O₄使得AP的TG曲线出现3个阶段,并使得后2个失重阶段的初始和终止温度都有所提前。凝聚相分解产物分析表明Ni_0.5Zn_0.5Fe₂O₄加速了凝聚相AP的分解及氨气的释放。含Ni_0.5Zn_0.5Fe₂O₄的AP的高温分解反应的动力学参数E_a=238.88 kJ·mol^-1,A=1018.59 s^-1,动力学方程可表示为dα/dt=10^18.99(1-α)[-ln(1-α)]^3/5e^-2.87×104T。始点温度(T_e)和峰顶温度(T_p)计算得出AP的热爆炸临界温度值分别为:574.83 K和595.41 K。分解反应的活化熵(ΔS^≠)、活化焓(ΔH^≠)和活化能(ΔG^≠)分别为:109.61 J·mol^-1·K^-1、236.49 kJ·mol^-1及172.58 kJ·mol^-1。     

磁载光催化剂TiO2/SiO2/Ni0.5Fe2.5O4的制备及其催化氧化性能

采用固相反应法制备磁载体(SiO₂/Ni_0.5Fe_2.5O₄),溶胶-凝胶法得到易于磁分离回收的磁载光催化剂TiO₂/SiO₂/Ni_0.5Fe_2.5O₄。用XRD、SEM、IR和UV-Vis等进行表征。研究了太阳光下催化剂对亚甲基蓝溶液的脱色性能。结果表明,在太阳光下,磁载光催化剂TiO₂/SiO₂/Ni_0.5Fe_2.5O₄可使亚甲基蓝溶液迅速脱色；3次循环使用后脱色率仍为95%以上,回收率为98.8%。     

还原条件对NiFe2O4－δ结构稳定性及其催化分解CO2活性的影响

采用柠檬酸络合法制备NiFe2O4，运用XRD、DTA-TG等手段对其结构进行表征，并探讨还原条件对NiFe2O4－δ的结构稳定性及其催化分解CO2成C反应活性的影响。研究结果表明，由柠檬酸络合法制备的NiFe2O4样品量为0.5g时，利用H2还原制备氧缺位NiFe2O4－δ的最佳还原条件为还原温度320℃、氢气流量40mL/min、还原时间3h。还原温度过高、还原时间过长以及氢气流量过大，均会使NiFe2O4－δ还原过度，尖晶石结构瓦解而转变成Fe(Ni)合金和α-Fe等。     

Cesium carbonate supported on hydroxyapatite coated Ni0.5Zn0.5Fe2O4 magnetic nanoparticles as an effi cient and green catalyst for the synthesis of pyrano[2,3-c]pyrazoles

Cesium carbonate supported on hydroxyapatite coated Ni0.5Zn0.5Fe2O4 magnetic nanoparticles (Ni0.5Zn0.5Fe2O4@Hap-Cs2CO3) was found to be magnetically separable, highly efficient, green and recyclable heterogeneous catalyst. The synthesized nanocatalyst has been characterized with several methods (FT-IR, SEM, TEM, XRD and XRF) and these analyzes confirmed which the cesium carbonate is well supported to catalyst surface. After full characterization, its catalytic activity was investigated in the synthesis of pyranopyrazole derivatives and the reactions were carried out at room temperature in 50:50 water/ethanol with excellent yields (88-95%). More importantly, the Ni0.5Zn0.5Fe2O4@Hap-Cs2CO3 was easily separated from the reaction mixture by external magnetic field and efficiently reused at least six runs without any loss of its catalytic activity. Thus, the developed nanomagnetic base catalyst is potentially useful for the green and economic production of organic compounds.     

单柱离子色谱法同时分离分析9种多价金属阳离子的研究

近年来 ,对生物样品中的重金属和过渡金属离子的分析已引起人们的关注 .目前 ,对这些离子的分析方法主要有分光光度法 [1] 、原子吸收法 (AAS) [2 ] 、原子发射法 (AES) [3 ] 和高频电感偶合等离子体发射光谱 -质谱 (ICP- MS) [4 ] 等 .这些方法或操作步骤冗长费时 ,需要多种化     

镍钴锌纳米铁氧体的制备及磁热性能

以乙酰丙酮盐为前驱体,三乙二醇为溶剂,采用多元醇法制备了纳米Ni0.5-xCoxZn0.5Fe2O4(x=0,0.1,0.2,0.3和0.4)铁氧体.通过X射线衍射仪(XRD)、透射电子显微镜(TEM)、傅里叶变换红外光谱仪(FTIR)和振动样品磁强计(VSM)等对样品的结构、形貌和磁性能进行了表征.结果表明,所得纳米Ni0.5-xCoxZn0.5Fe2O4铁氧体的分散性较好,尺寸均一.在室温下产物的剩磁和矫顽力均较小,表现出亚铁磁性.纳米Ni0.3Co0.2Zn0.5Fe2O4铁氧体的饱和磁化强度达到41.34 A·m2·kg-1,其在交变磁场中升温可达到55℃,表现出较好的磁热性能.     

聚苯胺/Co_(0.5)Zn_(0.5)Fe_2O_4纳米复合材料的制备及电磁性能

采用高分子凝胶法制备尖晶石型Co0.5Zn0.5Fe2O4,原位聚合法制备纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4纳米复合材料.使用傅立叶红外光谱(FTIR)、紫外可见吸收光谱(UV-Vis)、X射线衍射仪(XRD)和透射电子显微镜(TEM)对复合材料进行了表征.FTIR和XRD的结果表明样品为纯聚苯胺和聚苯胺/Co0.5Zn0.5-Fe2O4.UV-Vis光谱表明聚苯胺/Co0.5Zn0.5Fe2O4苯环上的π-π*和n-π*分别红移了23nm和5nm.TEM照片可知,聚苯胺和聚苯胺/Co0.5Zn0.5Fe2O4粒子的平均粒径分别约为50nm和70nm.在8.2～12.4GHz测试频率范围内,聚苯胺/Co0.5Zn0.5Fe2O4的ε″数值在9.2～12.3之间,u″数值在0.15～0.16之间;聚苯胺/Co0.5-Zn0.5Fe2O4介电损耗低于纯聚苯胺,而磁损耗高于纯聚苯胺.