微流控纸芯片的加工技术及其应用

微流控纸芯片是一种新兴的微流控分析技术平台,具有成本低、加工简易、使用和携带方便等优点,在临床诊断、食品质量控制和环境监测等应用领域具有很大的应用前景,近年来,引起广大科学工作者极大的兴趣。本文着重介绍目前文献相继报道的各种纸芯片加工技术,包括紫外光刻、蜡印、等离子体处理、喷墨打印、喷墨溶剂刻蚀、绘图、柔印和激光光刻等技术。此外,还介绍了微流控纸芯片分析中的检测方法及其应用。     

3D打印微流控芯片技术研究进展

近年来,微流控技术在生命科学和医学诊断等领域得到广泛的应用,显示出了其在检测速度、精度以及试剂损耗等方面相比传统方法的显著优势.然而,使用从半导体加工技术继承而来的微加工技术制作微流控芯片具有比较高的资金和技术门槛,在一定程度上阻碍了微流控技术的推广和应用.近年来随着3D打印技术的兴起,越来越多的研究者尝试使用3D打印技术加工微流控芯片.相比于传统的微加工技术,3D打印微流控芯片技术显示出了其设计加工快速、材料适应性广、成本低廉等优势.本文针对近年来国内外在3D打印微流控芯片领域的最新进展进行了综述,着重介绍了采用微立体光刻、熔融沉积成型以及喷墨打印等3D打印技术加工制作微流控芯片的方法,以及这些微流控芯片在分析化学、生命科学、医学诊断等领域的应用,并对3D打印微流控芯片技术未来的发展进行了展望.     

纸基过氯乙烯树脂微流控亚硝酸根离子检测片的研制

基于滤纸上过氯乙烯树脂栏选择性通过亚硝酸根离子, 结合微流控分析装置设计, 研制成纸基过氯乙烯树脂微流控亚硝酸根离子检测芯片. 采用该微流控亚硝酸根离子检测芯片测定了亚硝酸盐样品, 线性范围和检测限分别为70～1500 μmol/L 和48 μmol/L. 该微流控亚硝酸根离子检测芯片已成功应用于水样和食品中亚硝酸盐测定, 结果满意.     

基于等离子体技术制作微流控纸芯片及其在血糖检测中的应用研究

滤纸经十八烷基三氯硅烷(OTS)疏水化处理以后,用等离子体区域降解滤纸纤维表面的OTS疏水单分子层,使滤纸的局部区域恢复亲水性,得到具有亲疏水图案化的微流控纸芯片. 考察了等离子体处理时间对滤纸表面亲水性、亲水深度(水溶液由滤纸表层下渗至内部的纵向深度)的影响. 优化模具的设计,依据对滤纸亲水深度的不同需求,设计了两种PMMA-PDMS复合片的组合模具. 初步探讨了该亲疏水性变化过程的化学机理. 将制得的纸芯片用于人体全血中血糖含量的测定,线性范围为1.7～17.7 mmol·L^-1,可满足血液样品中血糖的测定.     

盖印法加工纸基微流控芯片及其应用

建立了一种盖印法加工纸基微流控芯片的方法。滤纸经烷基烯酮二聚体(AKD)的正己烷溶液浸泡,以三乙醇胺溶液为阻断试剂,用绘图软件设计芯片图案并制作光敏印章,用带有芯片图案的印章将阻断试剂盖印在滤纸表面。滤纸在105 ℃烘箱中加热10 min后,非盖印区域呈疏水性,盖印区域呈亲水性,从而形成液体流动通道。考察了疏水试剂浓度、阻断试剂的选择及配比、盖印分辨率等因素对纸芯片性能的影响。制得的纸芯片用于亚硝酸钠溶液的比色分析,获得良好的线性关系。该方法具有成本低廉、操作简便快速等特点,在制备廉价易普及的纸芯片方面有一定应用前景。     

基于微流控纸芯片-显色法快速测定全血中尿酸的含量

提出了基于微流控纸芯片-显色法快速测定全血中尿酸含量的方法。使用喷蜡打印机将设计的微通道网格打印在色谱纸上,经过加热处理得到微流控纸芯片。在微流控纸芯片I区(样品预处理区)滴加3.2μL 0.10 g·mL^-1乙二胺四乙酸(EDTA)溶液和4.8μL 0.015 g·mL^-1壳聚糖溶液,干燥,得到微流控纸芯片检测平台。全血样品与磷酸盐缓冲液(pH 7.4)按体积比1∶4混合,分取混合溶液13μL滴加至I区,红细胞与血浆在壳聚糖和EDTA的凝集作用下发生分离,血浆流动至II区(显色区);待血浆完全铺满II区后,滴加3μL三氯化铁和邻二氮菲的混合溶液,静置反应2 min,用手机拍照,采用Photoshop CS2软件分析显色区的颜色强度,得到RGB值(红、绿、蓝三色叠加值),根据标准曲线计算尿酸含量。结果表明：全血中葡萄糖等常见还原性物质均不影响尿酸含量的测定;尿酸浓度在0.05～0.85 mmol·L^-1内与RGB值呈线性关系,检出限(3.3s/k)为0.03 mmol·L^-1。方法用于实际全血样品分...     

微流控纸芯片在环境分析检测中的应用

近年来,微流控纸芯片由于低成本、便携化、检测快等优点,在需要快速检测的环境分析领域中展现出了巨大的应用前景。该综述从微流控纸芯片在环境分析中的应用角度,总结归纳了微流控纸芯片在环境分析中的最新研究进展,并展望了其在未来的发展趋势与挑战。论文内容引用150余篇源于科学引文索引(SCI)与中文核心期刊中的相关论文。该综述包括微流控纸芯片在环境检测中的优势与制造方法介绍;电化学法、荧光法、比色法、表面增强拉曼法、集成传感法等基于纸芯片的先进分析方法介绍;根据环境分析目标物种类,如重金属离子、营养盐、农药、微生物、抗生素以及其他污染物等,对纸芯片的最新应用现状进行了举例评述;基于微流控纸芯片的环境分析研究的未来发展趋势和前景展望。通过综述近期相关研究,表明微流控纸芯片从提出至今虽然只有十几年的发展历程,但其在环境分析研究中的发展却十分迅速。微流控纸芯片可以根据不同的环境条件和检测要求灵活选择制作与分析方法,实现最佳的检测效果。但是微流控纸芯片也面临一些挑战,如纸张机械强度不足、流体控制程度不佳等问题。这些问题指出了微流控纸芯片在环境检测领域的发展趋势,相信随着不断深入的研究,纸芯片将会在未来的环境分析中发挥更大作用。     

纸芯片微流控技术的发展及应用

纸芯片微流控技术是一种新型微流控技术。相比于以玻璃、石英、高聚物等为基底的传统微流控芯片,纸芯片具有成本低、易操作、可携带、耗样量小等优点。该文介绍了纸芯片的发展及常用的制作方法,并举例说明了光度法、荧光法、化学发光及电化学发光法和电化学法在纸芯片检测中的应用;归纳了纸芯片技术在临床诊断、环境监控以及食品安全分析等方面的应用;最后对纸芯片微流控的应用前景进行了展望。     

基于微流控芯片的荧光定量PCR法快速检测乙肝病毒核酸

提出了一种基于微流控荧光定量聚合酶链式反应(Polymerase Chain Reaction,PCR)的血液病毒快速检测新技术。采用3D打印技术制作了一种集气动阀和"树型"结构为一体的微流控芯片;运用Comsol软件对芯片导热性能进行了仿真;根据血站血液核酸检测工作中乙型肝炎病毒(HBV)、丙型肝炎病毒(HCV)、人类免缺陷病毒(HIV)三种病毒的筛查流程,结合高温控性能的微流控荧光定量PCR分析系统,在所设计微流控芯片上开展了血液样本中HBV的检测研究。实验结果表明,该芯片具有良好的温度均匀性和导热性,芯片上可实现血液样本中HBV的快速检测,其Ct值在37左右呈弱阳性。该技术与目前血液筛查使用的大型核酸检测系统相比,具有操作过程简单、所占空间小、检测效率高且试剂消耗量少的优点,进一步优化实验条件可实现多病毒核酸的并行检测。     

一种微流控芯片中大体积进样方法及专用芯片

本发明涉及微流控芯片系统的进样方法。在使用固定相的微流控芯片系统中,于芯片分离通道与流动相人口之间设置两个或两个以上的分流通道。通过控制其中流体的切换和截止,实现对微流控芯片系统的大体积进样。该方法适合于微流控芯片中电色谱、加压电色谱和液相色谱模式下的大体积进样。该方法的优点为：可实现微流控芯片中大体积样品的上样;克服了系统中的梯度延迟效应,     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.