醇预处理载体制备的 Ir-Re/SiO2催化剂上甘油氢解反应

甘油是生物柴油的副产物,将其转化为高附加值的化学品,能提高生物柴油产业的经济性.1,3-丙二醇是聚酯和聚氨酯的单体,也用于合成医药和用作有机合成中间体,甘油直接催化氢解反应制1,3-丙二醇极具发展潜力.另外,甘油是生物质转化的重要平台分子之一,与目标产物的分子结构相比较,生物质平台分子通常含有过多的含氧基团,尤其是多余的羟基,通过甘油氢解反应研究多羟基的选择性活化和脱除,可以加深对生物质脱氧规律的认识.因此,研究甘油氢解反应制1,3-丙二醇催化剂和工艺,不仅具有潜在的应用前景,而且具有重要理论价值.然而,目前的甘油氢解催化剂性能还不够高,我们希望通过一些表面改性的方法处理载体硅胶,从而改变金属前驱体与载体表面的作用.因此,本文使用 C1–C4的正构醇处理硅胶载体,其负载的 Ir-Re催化剂上甘油氢解反应转化率从42.7%提高到59.5%,仲羟基脱除收率从21.6%提高到28.3%.研究发现,当处理载体所用正构醇的碳数从1增加到3时,对应催化剂上甘油转化率逐渐增加至最高;但当使用更正丁醇时,对应催化剂上甘油转化率下降.为了探究催化剂活性改变的原因,我们首先采用红外光谱(FT-IR)和氮气物理吸附确定烷氧基基团嫁接到硅胶载体上.程序升温还原结果发现,预处理载体相应的催化剂开始还原温度降低,表明在这些催化剂上形成了颗粒尺寸较小的Ir粒子. X-射线衍射分析发现,在新鲜的和使用后的催化剂上均未检测出Re物种的衍射峰,说明Re高度分散于催化剂表面.吸附吡啶的FT-IR结果表明,未处理和丙醇预处理硅胶负载的催化剂上均没有强酸位,它们的B/L酸比值相近,约为3.3.催化剂的吸附COFT-IR结果表明, CO线性吸附于Ir/SiO2催化剂上的主要吸收峰位置在2084 cm–1;而Re的加入使得该吸收峰红移,表明Ir和ReOx物种之间存在相互作用.透射电镜(TEM)、H2-程序升温脱附和NH3-程序升温脱附结果发现,醇预处理催化剂上具有更多的Ir-ReOx界面,而界面位点的数量与甘油转化率大小一致,表明Ir-ReOx位点可能就是甘油氢解的活性中心.反应后催化剂的TEM结果表明,醇预处理催化剂上的Ir颗粒要小于未处理催化剂的,其中丙醇预处理硅胶负载的催化剂上Ir粒径最小.这是由于醇处理催化剂上存在很多孤立的Si–OH,它们与金属前驱体相互作用有利于形成较小的金属颗粒.这些孤立的Si-OH则是由于表面烷氧基基团的隔离作用所形成的.当处理载体所用正构醇的碳数从1增加到3时,烷氧基的碳链变长,分隔作用越好,阻止金属前驱体聚集的程度越强,因而Ir物种和Re物种的分散度增加.但是当处理醇的碳数增加到4时,形成的表面烷氧基基团可能阻止了Re物种和Ir物种间相互作用,从而使得Ir和Re物种的分散度均降低,相应催化剂活性随之降低.     

Catalyst-free SiO2 sonogels

The sol-gel process has been used extensively to produce a great variety of glasses and ceramics using tetraetoxisilane (TEOS) as precursor of the SiO₂ matrix. The majority of synthetic approaches have been focused on the alkoxide-alcohol-water system. In all cases the alkoxide reactions occur through an acid and/or basic catalyzed hydrolysis condensation process. The sonication of acidified water/TEOS has been used as an alternative method to stimulate the hydrolysis of the alkoxide and avoid the use of ethanol as common solvent. These so-called sonogels have been extensively studied, and interesting new properties have been well established. In this work the occurrence of a reaction between neutral water and TEOS activated by high intensity ultrasonic irradiation is evidenced. As a result of this reaction high purity SiO₂ gels are obtained. An ad-hoc experimental setup was used which allows control of the reaction atmosphere during the sonication step, as well as recording of the pH and temperature of the system. The sonication scheme consisted of successive irradiation and short silent periods. A reaction scheme is proposed based on the formation and recombination of radicals during the ultrasonic irradiation step, which results mainly in the formation of a poly-hydroxylated Si species, while the poly-condensation reactions occur after the irradiation step. The high purity SiO₂ sonogels obtained are of interest due to their potential applications as supports for non-linear optical materials, catalytic active phases or in drug delivery.     

SiO2-TiO2 membranes by the sol-gel process

The use of membranes for gas separation represents an important alternative from the viewpoint of energy conservation in industrial separation processes. Polymeric Si-Ti sols prepared from titanium isopropoxide (Ti(OPrⁱ)₄) and tetraethoxysilane (TEOS) were used to deposit membranes on α-Al₂O₃ supports. Acetylacetone (2,4 pentanedione, acacH) and isoeugenol (2-methoxy-4-propenylphenol, isoH) were employed separately to chelate the Ti precursor in order to slow down the chemical reactivity, avoiding precipitation. The radial distribution functions (RDF) of the gels aging at room temperature were obtained. The xerogels were studied by Thermal Gravimetric (TGA) and Differential Thermal (DTA) Analysis in air. The Microporosity of the solids calcined at 773 K was determined by N₂-adsorption at 77 K. The membrane thickness was determined from SEM photographs. Preliminary permeance results of the supported membranes on commercial alumina support were obtained for He, N₂ and CO₂ in a single gas equipment. At 773 K the separation factors α(He/CO₂) and α(N₂/CO₂) for both membranes exceeds the theoretical Knudsen limit.     

Matrixreaktionen von SiO. IR-spektroskopischer Nachweis der Molekeln SiO2 und OSiCl2

Matrix Reactions of SiO. IR-spectroscopic Identification of the Molecules SiO₂ and OSiCl₂ SiO evaporated from Knudsen cell reacts in argon matrix with atomic oxygen generated by microwave excitation to molecular SiO₂. Bands at 1400 cm^?1 in the IR matrix spectrum are assigned to the ν₃-vibration of molecules Si¹⁶O₂, Si¹⁶O¹⁸O, and Si¹⁸O₂. In an argon matrix SiO can reach with Cl₂ by excitation of a high pressure mercury lamp to OSiCl₂. Isotopic splitting (¹⁶O/¹⁸O, ²⁸Si/²⁹Si, ³⁵Cl/³⁷Cl) and force constant calculations show that the observed frequencies can be assigned to a planar molecule OSiCl₂. The bending mode δ (SiCl₂) could not be observed. The force constant f(SiO) is 9. 10² N m^?1 for SiO₂ and OSiCl₂. According to the SIEBERT rule this valence force constant is expected for a double bond between silicon and oxygen.     

Nucleation Phenomenon in Silica Xerogels and Pd/SiO2, Ag/SiO2, Cu/SiO2 Cogelled Catalysts

Pd/SiO₂, Ag/SiO₂ and Cu/SiO₂ xerogel catalysts have been synthesized by cogelation of tetraethoxysilane (TEOS) and chelates of Pd, Ag and Cu with 3-(2-aminoethylamino)propyltrimethoxysilane (EDAS). It appears that, in cogelled samples, the metal complex acts as a nucleation agent in the formation of silica particles. The resulting catalysts are then composed of completely accessible metallic crystallites with a diameter of about 3 nm located inside silica porous particles with a monodisperse microporous distribution. Xerogels without metal synthesized with EDAS and TEOS (C. Alié, R. Pirard, A.J. Lecloux, and J.-P. Pirard, J. Non-Cryst. Solids 289, 88 (2001)) verify this hypothesis of nucleation by EDAS.     

二氧化碳在Pd/SiO2和La-Pd/SiO2上的催化氢化反应

对CO₂在附载型Pd催化剂上的氢化反应的研究迄今报道不多^[1,2],且都在加压条件下进行,对常压下助催剂如何改善Pd的催化行为未见报道。本文探讨了Pd/SiO₂催化剂,未加与掺加助催剂La(NO₃)₃后,其Pd粒大小、CO₂的吸附性能及CO₂/H₂催化活性等方面都有显著差异。     

Montmorillonite intercalated with SiO2, SiO2-Al2O3 or SiO2-TiO2 pillars by surfactant-directed method as catalytic supports for DeNOx process

The intercalation of natural montmorillonite with SiO₂, SiO₂-Al₂O₃ or SiO₂-TiO₂ pillars by the surfactant-directed method resulted in the formation of high surface area porous materials; these were tested as catalytic supports for the process of selective catalytic reduction of NO (DeNOx). The incorporation of titanium or aluminium into the structure of the silica pillars significantly increased the surface acidity of the clay samples. Iron and copper were deposited onto the surface of the pillared clays mainly in the form of monomeric isolated cations and oligomeric metal oxide species. The contribution of the latter species was higher in the clay intercalated with SiO₂-TiO₂ pillars than in the samples modified with SiO₂ and SiO₂-Al₂O₃ pillars. The pillared clay-based catalysts were active in the DeNOx process but, in this group, the best results were obtained for the clay intercalated with SiO₂-TiO₂ pillars and doped with iron and copper. The catalytic performance of the samples is discussed in respect of their surface acidity and active forms of transition metal species deposited.     

Photoluminescence from (Si/SiO2)n superlattices and their use as emitters in [SiO2/Si]n SiO2 [Si/SiO2]m microcavities

Si/SiO2 superlattices are recently under investigation to add optical functionality to silicon based microelectronics. In such superlattices quantum-confinement should drive Si to become a good light emitter. Emission properties can be further improved and controlled by placing the emitter in optical microcavities. In this paper emission properties of (Si/SiO2), superlattices grown by Low Pressure Chemical Vapour Deposition will be compared with the ones obtained by other growth techniques and the origin of the emission will be discussed. Emission properties can be further improved and controlled by placing the emitter in optical microcavities. Optical properties of microcavities produced with standard complementary metal-oxide-semiconductor techniques containing Si/SiO2 superlattices as light emitter will be reviewed and a comparison between properties estimated from calculations and experiments will be given.     

耐环境性SiO2/SiO2-TiO2 增透膜的设计与制备

根据膜层设计理论设计出以K9玻璃为基体的耐环境性的双层增透膜, 这种增透膜在特定波长处具有超高的透过率. 以盐酸为催化剂, 分别以正硅酸乙酯和钛酸丁酯为前驱体制备了SiO2和TiO2溶胶, 将SiO2和TiO2溶胶按一定比例混合得到SiO2-TiO2复合溶胶. 通过改变复合溶胶中SiO2的含量调节复合膜的折射率, 通过改变提拉速度控制薄膜的厚度. 实验结果表明, 双层增透膜在550 nm处的透过率达到99.9%. 增透膜经较强机械摩擦后峰值透过率基本保持不变, 表明该增透膜具有优良的耐摩擦性. 进一步采用六甲基二硅氮烷对增透膜表面进行修饰, 修饰后增透膜的接触角增大至98.3°, 增透膜的疏水性及环境稳定性得到较大提高.     

Nanoscale composite materials in the system SiO2–TiO2

Nanoscale composite materials based on the SiO₂–TiO₂ system were prepared in the form of co-precipitated composites and core SiO₂–shell TiO₂ composites, with specific surface area 150–650 m²/g and sorption volumes 0.1–1.0 cm³/g. It is shown that variation of phase composition and morphology permits to change their structural-adsorption properties and nanocrystallites size after thermal treatment. It is discovered that co-precipitated composite materials differ from core SiO₂–shell TiO₂ composites by a component interaction degree. It determines the difference of the titan-containing component crystallization process and alteration of their structural-absorption properties after thermal treatment. The results of the tests of composites as photocatalysts for Rhodamine B decomposition reaction, as catalysts of Hantzsch and Biginelli reaction, and as fillers in electrorheological fluids are shown.     

Anisotropic Swelling of Oblique-Deposited SiO/SiO2Films in Water Vapors

Due to anisotropic swelling of mixed SiO/SiO₂films induced by water adsorption, geometrically regular film buckling from the substrate was observed in the form of linear spatially periodical structures with longitudinal orientation. The mechanical stresses in these films and geometry of the formed structures were studied. A mechanism was proposed to describe the observed deformation effect.     

Surface oxidation states in Si/SiO2 nanostructures prepared from Si/SiO2 mixtures

Silica nanospheres have been produced by a novel technique where surface Si oxidation states can be adjusted using the ratio of metalloid ions/metalloid atoms in the starting mixture. When the proportions of Si4+/Si0 are equal in the synthesis, the resulting solid is considerably more reactive than Cab-O-Sil toward the phenol hydroxylation reaction and the surface shows an average Si oxidation state of +3. On the other hand, those silica nanospheres, produced from a mixture of Si4+/Si0 = 0.25, showed a lower reactivity comparable to that of Cab-O-Sil which XPS demonstrates has a surprisingly low average Si oxidation state close to +1. We speculate that the silicon surface oxidation state and the number of surface silanol groups play important roles in determining the activity of the solid toward the phenol hydroxylation reaction. In expanding our earlier report4 on the copper-silica system, we establish that the surface chemistry of the silica nanospheres is apparently different from that of fumed, amorphous silica. These results suggest that we are developing a technique that can be generalized to create supported, mixed metal oxides having tunable average surface oxidation states.     

Novel Mg2SiO4 structures

We describe the formation of novel, leaf-like Mg2SiO4 structures, via iodine vapour transport of magnesium onto quartz substrates.     

Photochemistry of coumarin-functionalized SiO2 nanoparticles

We describe the synthesis and photochemistry of coumarin-functionalized silica nanoparticles, which were prepared utilizing 7-[3-(triethoxysilyl)propanyloxy]coumarin (TPC) to attach coumarin as a photoactive group to the silica nanoparticle surface. The nanoparticle size and morphology were investigated by scanning electron microscopy, atomic force microscopy, and dynamic light scattering. The diameter of the spherical nanoparticles was determined by all three methods to be about 40 nm. The surface functionalization was characterized in the bulk by ζ-potential measurements and on the single-nanoparticle level by electrostatic force microscopy, where the difference in surface potential between TPC-modified and unmodified silica nanoparticles is measured. The degree of surface functionalization was determined by thermogravimetric analysis (TGA), and a theoretical limit of about 23,000 coumarin entities per nanoparticle was calculated. The photochemistry, and its reversibility, of the nanoparticle-attached coumarin entities was found to be quite different from the coumarin photochemistry in solution or on flat surfaces. Photodimerization with light of 355 nm and photocleavage with light of 254, 266, and 280 nm were analyzed by absorption and fluorescence spectroscopy. Following several cycles of photodimerization and photocleavage showed that the absorption change at 320 nm decreases from cycle to cycle. The coumarin layer on the nanoparticles was proven to be unchanged by TGA. The apparent loss of absorption change is due to the formation of interlinked nanoparticles during the dimerization-cleavage cycles. Because the coumarin groups on the inside of the obtained nanoparticle clusters are inaccessible to light, the amount of "uncleavable" dicoumarins increases, thus lowering the obtainable absorption change from cycle to cycle.     

Impact of PS/SiO2 morphologies on the SERS activity of PS/SiO2/Ag nanocomposite particles

To understand the relationship between the morphology of carboxyl-functionalized polystyrene/silica (PS/SiO₂) nanocomposite microspheres and the surface-enhanced Raman scattering (SERS) performance of PS/SiO₂/Ag nanocomposite particles, core-shell and raspberry-like PS/SiO₂ composite microspheres were used as templates to prepare PS/SiO₂/Ag nanocomposite particles. The core-shell and raspberry-like structured PS/SiO₂ templates were prepared via in situ sol-gel reaction by hydrolysis tetraethyl orthosilicate (TEOS) in alkali solution. Silver nanoparticles (10–50 nm) were loaded on the PS/SiO₂ templates’ surface by chemical reduction. The morphology and structure of the PS/SiO₂/Ag particles were characterized by TEM, SEM, X-ray diffraction (XRD), and ultraviolet-visible (UV-vis) spectroscopy. Rhodamine 6G (R6G) was selected as a model chemical to study the enhancement performance of substrate constructed by PS/SiO₂/Ag nanocomposite. Results indicated that the PS/SiO₂/Ag nanocomposite prepared based on the core-shell templates showed higher SERS activity. The beneficial effect was associated with a lower specific area of core-shell structure and the larger average diameter of nanosilvers than that of the raspberry-like templates.     

Bi2SiO5半导体光催化剂

Bi基半导体光催化剂具备独特的电子能带结构、可调节与可拓展的光谱响应范围、低毒及组成元素供给丰富等优点,使其成为高效、可实用型光催化剂的重要候选者。而Bi基非金属氧酸盐作为新型半导体光催化剂,其非金属氧酸根的表面修饰作用及高结晶性使其呈现出更加独特的光催化活性。本文简要介绍了Bi基半导体光催化剂的结构特性及近几年的研究进展,重点综述了Bi基非金属氧酸盐的一员--Bi₂SiO₅及其制备、异质结的构建和电子能带结构的研究进展,并对其今后的研究与应用方向作了进一步的展望。     

Darstellung von Oxalatosilicaten aus SiO2

Preparation of Oxalatosilicates from SiO₂ Amorphous silica (aerosil, silica gel, or kieselguhr) reacts with oxalic acid under anhydrous conditions in presence of appropriate bases, forming oxalatosilicates. Tris(oxalota)silicates of triethylammonium, dicyclohexylammonium, triphenylphosphonium and K(18-crown-6) are obtained in high yields by this reaction.