季戊四醇四苯甲酰甲酸酯的合成及光引发性能

大分子光引发剂可以解决小分子光引发剂残留碎片带来的毒性对其在食品和医用材料领域应用的限制,为此,本文以苯甲酰甲酸(BF)和季戊四醇(PET)为原料,通过酰氯法在季戊四醇主链上引入了4个苯甲酰甲酸酯基团,制备了多官能度的季戊四醇四苯甲酰甲酸酯(PTF)大分子光引发剂。 PTF在225 ℃时失重15%,热稳定性优于2-羟基-2-甲基-1-苯基-1-丙酮(1173)光引发剂,与1173光引发剂相比,用PTF作光引发剂所制备的光固化涂料,在起始分解温度以及失去相同比例质量所需温度均提高了100 ℃以上。 PTF引发三羟甲基丙烷三丙烯酸酯(TMPTA)聚合时最大反应速率为0.037 s^-1,最终双键转化率为39.5%,PTF光引发活性大于1173光引发剂。 在同等实验条件下,PTF的相对小分子残留量仅为1173光引发剂的5%。     

含氟光引发剂的合成及其性能研究

以2-羟基-4'-(2-羟乙氧基)-2-甲基苯丙酮(Irgacure 2959)和全氟辛酰氯(PFOC)为原料合成了光引发剂全氟辛酸-2-[4-(2-羟基-2-甲基丙酰)苯氧基]乙酯(2959-F),利用红外光谱(FT-IR)和核磁共振(¹⁹F NMR)对2959-F进行了结构表征;通过紫外吸收光谱测定了2959-F的紫外吸收谱;通过实时红外光谱(RT-IR)对合成的含氟光引发剂进行了光聚合反应动力学研究,考察了光强和引发剂浓度对单体的双键转化率和聚合速率影响,并研究了光引发剂2959-F的抗氧阻聚性能.结果表明:随着光强的增大,单体的双键转化率和聚合速率增加;在一定范围内,引发剂的浓度越高,双键转化率越高,聚合速率越快.2959-F具有较高的双键转化率和较快的聚合速率,并且具有较好的抗氧阻聚性.     

新型苯甲酰甲酸酯光引发剂的合成及其性能

以苯甲酰甲酸和二缩三乙二醇为原料,经酯化反应合成了一种新型的光引发剂苯甲酰甲酸二缩三乙二酯(2),其结构和性能经¹H NMR, ¹³C NMR, FT-IR, HR-MS,元素分析和TG表征。紫外光谱分析显示2的最大吸收峰位于251.1 nm和298.8 nm。2能有效引发含双键的聚氨酯丙烯酸酯与单体的光聚合反应,光固化时间小于1 min,固化膜性能良好。     

以固体光气为原料合成氯代甲酸(2-乙基)己酯

氯代甲酸(2-乙基)己酯是一种化工中间体,主要用来制备过氧化二碳酸二(2-乙基)己酯(简称EHP),EHP是一种高活性聚合引发剂。由固体光气和2-乙基己醇为原料合成氯代甲酸(2-乙基)己酯的研究未见报道。本文以固体光气和2-乙基己醇为原料合成了氯代甲酸(2-乙基)己酯,研究了反应物加入顺序、反应时间、反应温度、催化剂种类及用量对氯代甲酸(2-乙基)己酯收率和纯度的影响,得到了优化的合成工艺,对产物结构进行了分析,进一步用其合成了常用的高活性聚合引发剂过氧化二碳酸二(2-乙基)己酯(EHP)。     

三臂ATRP引发剂的合成及应用

分别以三乙醇胺、三聚氰胺为原料,通过酰化反应合成了三种具有配体功能的三臂原子转移自由基聚合(ATRP)引发剂:三[2-(2-溴异丁酰氧基)乙基]胺,三[2-(4-氯甲基苯甲酰氧基)乙基]胺和2,4,6-三(2-溴异丁酰胺基)-1,3,5-三嗪,收率分别为81%,69%和83%。以三[2-(2-溴异丁酰氧基)乙基]胺既作引发剂又作配体进行甲基丙烯酸甲酯(MMA)的ATRP乳液聚合,结果表明反应前期与中期具有活性/可控特征。     

一锅法合成2-(2-氨基苯甲酰胺基)苯甲酸类化合物

报道了一种一锅法高效合成2-(2-氨基苯甲酰胺基)苯甲酸类化合物的新方法.以取代2-氨基苯甲酸为原料,合成了20个2-(2-氨基苯甲酰胺基)苯甲酸类化合物,其中有9个新化合物,收率达84%～99%.该方法操作简单,反应条件温和,对环境友好,产率高,并且底物普适性好.探讨了电子效应和空间位阻因素对反应的影响,为2-(2-氨基苯甲酰胺基)苯甲酸类化合物的合成提供了一种新途径.并且,2-(2-氨基苯甲酰胺基)苯甲酸(3a)经一步反应可高效生成大环内酯4和喹唑啉酮5.     

纳米SiO_2锚固光敏基团引发MMA光接枝聚合研究

对纳米SiO2进行了锚固光引发剂的表面修饰,进而引发甲基丙烯酸甲脂(MMA)光接枝聚合制备有机/无机复合粒子.纳米SiO2粒子首先用氯化亚砜进行表面氯化,再与光引发剂2-羟基-4-(2-羟基乙氧基)-2-甲基苯丙酮(Irgacure2959)反应从而锚固上光引发剂.通过紫外光引发MMA在经过修饰过的纳米SiO2表面上进行表面光接枝聚合.采用IR、TGA和TEM等方法表征了接枝前后纳米粒子的变化,证明了表面接枝物的存在,并研究了不同反应条件对单体转化率、接枝率和接枝效率的影响.研究结果表明,搅拌对接枝过程的影响比较显著.TGA结果显示未搅拌聚合时接枝率只能达到比较小的程度,而在搅拌条件下180min内MMA的接枝率可达到110%.     

纳米二氧化钛催化二苯并1,10-菲咯啉衍生物的合成研究

首次报道了纳米TiO_2催化1,2-环己二酮与2-氨基苯甲酰衍生物的串联Friedlander反应,合成了9个二苯并1,10-菲咯啉的衍生物(3a~3i),其中3b,3c,3e~3g和3i为新化合物,其结构经~1H NMR,~(13)C NMR和HRMS(ESI)表征。以6,7-二氢-5,8-二苯基苯并[1,10]菲咯啉(3a)的合成为例,对反应条件进行了优化。最佳反应条件为:锐钛型纳米二氧化钛用量为0.2 eq.,1a与2投料比为2.1∶1,乙腈为溶剂,于80℃反应7 h,收率83%。并对反应机理进行了探讨。     

苯甲酰氧基取代的2-吡喃酮的固相光二聚反应

以二苯甲酮为光敏化剂,C4-位苯甲酰氧基取代的6-甲基-2-吡喃酮(1)的固相光二聚反应穿过1的C3-C4双键高选择性地发生[2+2]环加成反应合成了anti头-头二聚物(2),其结构经1H NMR,FI-IR,MS和元素分析表征。反应机理利用WINMOPAC PM5方法推定。     

三光气法合成盐酸罗哌卡因

以三光气为酰氯化剂,2-哌啶甲酸经酰氯化,酰胺化制得1-N-(2,6-二甲基苯基)-2-哌啶甲酰胺(2),收率50.1%(以2-哌啶甲酸计)。以DMF为溶剂,2经丙基化反应合成了盐酸罗哌卡因(1),收率54%。1和2的结构经1H NMR表征。     

UV‐Irradiation Cured Organic‐inorganic Hybrid Nanocomposite Initiated by Ethoxysilane‐modified Multifunctional Polymeric Photoinitiator through Sol‐gel Process

The UV‐cured organic‐inorganic hybrid nanocomposite (nano‐Si‐m‐PI) was prepared through the photopolymerization of acrylic resin initiated by ethoxysilane‐modified multifunctional oligomeric photoinitiator (Si‐m‐PI). The esterification reaction of 2‐hydroxy‐4′‐(2‐hydroxyethoxy)‐2‐methylpropiophenone (Irgacure 2959) with thioglycolic acid, and the following addition reactions with dipentaerythritol hexaacrylate and then 3‐aminopropyltriethoxysilane were carried out for preparing the Si‐m‐PI. The Si‐m‐PI exhibits the similar UV absorption and molar extinction coefficient with Irgacure 2959. The photoinitiating activity study by photo‐DSC analysis showed that the Si‐m‐PI possesses high photopolymerization rate at the peak maximum (R_p^max) and final unsaturation conversion (P^f) in the cured hybrid films. From the scanning electron microscope (SEM) observation, the SiO₂ nanoparticles dispersed uniformly in the formed nano‐Si‐m‐PI, whereas the aggregation of nanoparticals occurred in nano‐Irg, which was prepared through the photopolymerization of acrylic resin initiated by Irgacure 2959. Moreover, compared with the UV‐cured pure polymer and nano‐Irg, the nano‐Si‐m‐PI showed remarkably enhanced thermal stability and mechanical properties.     

Highly efficient alginate-based macromolecular photoinitiator for crosslinking and toughening gelatin hydrogels

Constructing gelatin hydrogels through photopolymerization is getting increasingly attractive due to their excellent biocompatibility and unparalleled flexibility in fabricating complex structures. In this study, an alginate-based macromolecular photoinitiator (Alg-2959) is synthesized by grafting Irgacure2959, a widely used hydrophilic small molecular photoinitiator, onto the framework of alginate. The characterization of Alg-2959 is carried out by ¹H nuclear magnetic resonance (¹HNMR), Fourier infrared spectroscopic (FTIR), Thermogravimetric analysis (TGA), and UV–Vis absorption spectrum. It is shown that Alg-2959 can induce the polymerization of acrylate monomer poly(ethylene glycol) diacrylate (PEGDA400) and glycidyl methacrylate modified gelatin (Gel-GM) with similar initiation efficiency as Irgacure2959. Compared with the pure hydrogels prepared using Irgacure2959, the hybrid hydrogels containing Alg-2959 can be further crosslinked by Ca²⁺ to form the double-network hydrogels, which exhibit enhanced toughness and elasticity. In addition, due to the introduction of alginate, the migration stability of Alg-2959 in the hydrogel networks is significantly improved compared with Irgacure2959. These results indicate the great potential of Alg-2959 in preparing biocompatible and resilient photopolymers.     

四氢糠酸的拆分工艺改进

利用非对映异构体盐在溶剂中溶解度的不同,以(1S,2R)-1-氨基-2-茚醇(1)为手性拆分剂,拆分四氢糠酸［(RS)-THFA, (RS)-2］获得高光学纯的(S)-2,其结构经¹H NMR, ¹³C NMR和HPLC确证。探究了不同溶剂量和投料比对拆分效果的影响。结果表明较佳拆分条件为：以4-甲基-2-戊酮(3)作溶剂,n［(RS)-2］: n(1)=2.2 : 1,一次拆分得91.7% ee (S)-2;再以n［91.7% ee (S)-2］: n(1)=6 : 5进行二次拆分得99.0% ee (S)-2。拆分剂的回收率提高至92.0%,同时对拆分母液中的非目标对映体成功地进行消旋化,回收率为89.0%,实现了四氢糠酸的循环拆分。     

Determination of phenylglyoxylic acid in urine using a multi-pumping flow system

In this work a simple, fast and fully automated analytical methodology for the spectrophotometric determination of phenylglyoxylic acid is proposed. Phenylglyoxylic acid is a metabolite of styrene that is excreted in urine, being used as an indicator of styrene occupational exposure. The developed procedure was based on the phenylglyoxylic acid ability to inhibit the formation of the peroxovanadium cation produced by the reaction between vanadate and H₂O₂. The analytical process was implemented in a multi-pumping flow system that employs multiple solenoid actuated micro-pumps as the only active components. This enabled the reproducible insertion and efficient mixing of low volumes of sample and reagents as well as the transportation of the sample zone towards detection. Thus an easily controlled, low cost, compact and reliable analytical system was implemented. A linear working range for phenylglyoxylic acid concentrations up to 700?mg?L^?1 (r ^2?=?0.995, n?=?7), was obtained, with a detection limit of 37?mg?L^?1. The system handles about 43 determinations per hour yielding precise results (relative standard deviation?<?5%, n?=?10). The developed methodology was applied to the determination of phenylglyoxylic acid in urine samples and the obtained results were in agreement with those furnished by the comparison method with relative percentage deviations lower than 6.6%.     

碳酸钙表面感光修饰及其在UV涂料中的应用

本文以丁二酸酐(SAA)、2-羟基-4-(2-羟基乙氧基)-2-甲基苯丙酮(D2959)和环氧油酸(EOA)为原料,合成了一种具有感光性的脂肪酸S-2-E,并用于碳酸钙的改性.然后以油酸(OA)改性碳酸钙为对比,通过吸油量测试、差动光照热分析仪(DPC)、动态力学分析(DMA)、扫描电镜(SEM)等测试手段讨论了S-2-E对碳酸钙的改性效果、相应改性碳酸钙S-2-E-CaCO3的光活性及S-2-E-CaCO₃对UV涂料的性能影响 .结果显示,S-2-E对碳酸钙的改性效果与OA相当 .碳酸钙经S-2-E改性后具有一定的光活性,能参与UV涂料的固化,固化膜的硬度、耐水性等性能有所改善.     

Synthesis and thermal study of rhenium(V) coordination compounds with pyroracemic acid and phenylglyoxylic acid thiosemicarbazones

Rhenium(V) coordination compounds with pyroracemic acid and phenylglyoxylic acid thiosemicarbazones were synthesized for various metal-to-ligand ratios in 1–7 M hydrohalic acids. The composition and structure of the complexes were characterized using a set of physicochemical methods. The thermal stability of rhenium(V) complexes with pyroracemic acid and phenylglyoxylic acid thiosemicarbazones and rhenium(V) solvato complexes with pyroracemic acid thiosemicarbazone was studied thermogravimetrically. The thermolysis mechanism for the complexes was determined as follows: elimination of outer-sphere water, decarboxylation, and dehalogenation.     

茶叶样品中绿原酸含量的高效液相色谱法测定

建立了茶叶绿原酸含量测定的择相高效液相色谱法,采用PecosphereC18柱,以甲醇－水（体积比18：20,水中含φ＝1／61的甲酸）淋洗,用紫外检测器于326nm处测定,各组分的色谱峰达到基线分离。绿原酸在0．02－4．02μg范围内线性关系良好,线性相关系数 r＝0．9996。在安徽黄山产贡菊和安徽产金银花中加标的回收率分别为86．8％、102．0％,该法已用于十多种茶趺实际样品的测定。     

UV curing behaviors and hydrophilic characteristics of UV curable waterborne hyperbranched aliphatic polyesters

A series of waterborne hyperbranched polyesters (WBHPs) endcapped with methacrylic and salt-like groups in different ratios have been investigated as UV curable resins. The kinetic studies of the drying step and UV curing were carried out by FT-IR measurements. The drying of the film of 100 μm thickness was completed in less than 6 hr at 70°C or within 10 hr at 50°C in an oven. The influence of different photoinitiators and their concentrations, extent of unsaturation and acid content of WBHP on final unsaturation conversion was studied. The surface free energy is a critical character, which affects the surface properties of a cured film. So one method based on the measurement of contact angle of a pure liquid on a solid surface was applied to determine the polar and dispersive components of the surface energy of UV cured films. The investigations of surface energy of WBHPs illustrated that those with more acid content and thus higher polar component are more sensitive to water, while those containing less acid content and thus lower polar term are less water sensitive. Moreover, the UV cured films of WBHPs and their blends with commercial waterborne resins (trade name EB 210, EB 2002, EB 11 and IRR 160) have acceptable pendulum hardness varying from 55 to 180 sec. Copyright © 2003 John Wiley & Sons, Ltd.     

聚苯氧基磷酸联苯二酚酯/聚磷酸铵膨胀阻燃剂对环氧树脂阻燃性能影响研究

以聚苯氧基磷酸联苯二酚酯(PBPP)与聚磷酸铵(APP)组成复合阻燃剂,对环氧树脂(EP)进行阻燃改性.通过氧指数(LOI)、垂直燃烧(UL-94)、热失重(TGA)、锥形量热(CONE)和扫描电镜(SEM)等方法研究改性环氧树脂的阻燃性能和阻燃机理.结果表明,PBPP/APP体系对EP具有较好的阻燃性能,阻燃剂添加量为10%时能使环氧树脂的氧指数提高到29.6%,垂直燃烧等级达到UL94 V-0级,残炭量大大增加;平均热释放速率下降45.7%,热释放速率峰值下降51.0%,有效燃烧热平均值下降21.1%;TGA、CONE、SEM等综合分析显示了PBPP/APP改性后的环氧树脂比纯环氧树脂具有更高的热稳定性,燃烧后能够形成连续、致密、封闭、坚硬的焦化炭层,在聚合物表面产生有效覆盖、隔绝了氧气,改善了环氧树脂的燃烧性能.