紫外光聚合法制备L-DBTA手性分子印迹聚合物的研究Ⅰ.紫外光聚合制备条件

以丙烯酸为功能单体,二苯甲酰-L-酒石酸(L-DBTA)为模板分子,三羟甲基丙烷三丙烯酸酯(TMPTA)为交联剂,采用光聚合方法合成了L-DBTA手性分子印迹聚合物,讨论了功能单体种类、功能单体用量、交联剂用量、引发剂用量、三乙胺用量、光聚合温度、光聚合时间、光强度等对L-DBTA手性分子印迹聚合物合成的影响。通过L-DBTA手性分子印迹聚合物对底物的结合实验分析,表明手性分子印迹聚合物对L-DBTA具有很好的识别性,L-DBTA的选择性比二苯甲酰-D-酒石酸(D-DBTA)高,其分离因子可达5．41。     

烯唑醇分子印迹聚合物的合成及其吸附性能研究

以烯唑醇为模板分子,MAA为功能单体,EDMA为交联剂,采用本体聚合法合成分子印迹聚合物。考察了采用不同比例的模板分子与功能单体合成的聚合物对烯唑醇的吸附量,通过静态吸附试验研究了烯唑醇分子印迹聚合物对烯唑醇吸附性能的影响,并进行Scatchard分析。由Scatchard分析可知模板分子烯唑醇与功能单体MAA形成了1类结合位点,结合位点的离解常数KD=0.117mmol/L,最大表观结合量Qmax=38.66μmol/g。     

原位聚合那格列奈分子印迹手性固定相的分子识别特性研究

以手性药物那格列奈为模板分子，采用原位聚合法制备了具有特定识别性能和手性拆分能力的分子印迹聚合物，并用作高效液相色谱固定相实现了那格列奈与其对映体的手性拆分．通过静态结合方法考察了该聚合物的选择结合能力，并讨论了手性分离过程中的热力学性质．结果表明，原位聚合法制备的棒状聚合物固定相对模板分子及其对映体有很好的手性拆分性能．     

乙酰水杨酸分子印迹聚合物的合成及性能研究

采用分子印迹技术,以乙酰水杨酸为模板分子,1,4-二乙烯基苯为交联剂,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,合成了对乙酰水杨酸具有特异性吸附能力的两种分子印迹聚合物;它们对乙酰水杨酸都存在两类不同亲和性的结合位点,其中用丙烯酰胺合成的分子印迹聚合物对模板分子乙酰水杨酸的氢键作用力和结合能力都比用α-甲基丙烯酸合成的聚合物强。这对分子印迹技术用于环境、血液等复杂样品中乙酰水杨酸的分离和富集具有重要意义。     

儿茶素活性成分分子印迹聚合物的分子识别特性及固相萃取研究

以表没食子儿茶素没食子酸酯(EGCG)为模板分子，α-甲基丙烯酸为功能单体，乙二醇二甲基丙烯酸酯为交联剂，合成EGCG分子印迹聚合物。利用该聚合物对EGCG及其异构体和结构类似物进行分子识别特性研究。结果表明：分子印迹聚合物对模板分子具有较高的选择性和识别能力，而空白聚合物却不具备这样的特性。在此基础上，把聚合物用于固相萃取茶叶提取物茶多酚，分离富集其中的儿茶素活性成分单体EGCG，获得了满意的效果。     

农药丙溴磷分子印迹聚合物微球的制备与结合性能研究

采用分子印迹技术,以丙溴磷为模板分子,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,在乙腈溶液中合成了2种对丙溴磷具有选择性结合能力的分子印迹聚合物.紫外光度法研究表明,模板分子丙溴磷与α-甲基丙烯酸之间的作用强于其与丙烯酰胺之间的作用;扫描电镜的研究则表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物呈微球形,粒径约为0.5 ～2 μm;利用平衡结合实验研究了不同功能单体制备的聚合物对模板分子的结合能力及其对底物的选择性,经Scatchard模型分析,求出了聚合物的最大表观结合量(Qmax)和平衡离解常数(Kd)分别为49.44 μmol/g 和1.05 mmol/L.研究表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物对丙溴磷表现出更强的结合能力和更高的选择性.     

噻吩分子印迹聚合物的合成及其识别性能研究

采用分子印迹技术合成了噻吩分子印迹聚合物。研究了聚合物的吸附性能和识别性能,并考察了影响聚合物吸附性能的因素(如:功能单体、交联剂、溶剂以及模板分子与功能单体的摩尔比等)。结果表明:以噻吩为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,氯仿为溶剂,反应温度60℃,在偶氮二异丁腈引发下合成的噻吩分子印迹聚合物对噻吩具有较好的吸附性能和识别特性,可为石油产品进行深度脱硫提供理论依据。     

苯甲酸分子印迹聚合物的制备及其吸附性能

以苯甲酸为模板分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用本体聚合法制备了高选择性识别的分子印迹聚合物。利用合成的聚合物作为吸附剂填充制备气体浓缩针装置,并用于挥发性有机化合物(VOCs)的气相色谱分析。实验结果表明:60℃下恒温聚合反应6h,模板分子、功能单体、交联剂的物质量比为1∶4∶20,预聚合时间为3h,溶剂为乙腈,模板分子为苯甲酸时,合成的分子印迹聚合物对苯系物的吸附量最大。     

分子印迹手性分离过程的热力学研究

以丙烯酰胺为功能单体, 以二甲基丙烯酸乙二醇酯为交联剂, 在模板分子N-叔丁氧羰酰-L-色氨酸(N-Boc-L-Trp)和N-叔丁氧羰酰-L-酪氨酸(N-Boc-L-Tyr)的存在下, 分别采用光引发聚合和热引发聚合制备了N-Boc-L-Trp和N-Boc-L-Tyr的分子印迹聚合物(MIPs), 进行分子印迹手性分离过程的热力学研究. 测定了分离过程的熵变、焓变和自由能变化. 结果显示, 在流动相中添加异丙醇或甲醇等强氢键竞争性溶剂时, 熵变对分离起到了主要作用, 而且分离过程中的溶剂化对分离的影响也非常大. 分子印迹聚合物对印迹分子和非印迹分子进行分子识别的主要作用是印迹聚合物与印迹分子匹配的三维空间结构.     

1-氨基乙内酰脲分子印迹聚合物的制备和吸附性能研究

以1-氨基乙内酰脲(AHD)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了分子印迹聚合物(M IP),考察了模板分子与功能单体不同比例下制备的M IP对模板分子的吸附性能。通过Scatchard分析,表明该印迹聚合物上存在一类等价的吸附位点,其结合位点的离解常数KD=4.33mmol/L。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.