氨布洛芬合成工艺的优化

对氨布洛芬的合成工艺进行了优化。以甲苯为溶剂,布洛芬经酰氯化制得布洛芬酰氯;K2CO3作缚酸剂,布洛芬酰氯与乙醇胺完成酰胺化反应合成了氨布洛芬,收率94.4%,纯度99.09%。     

AOT-水-正庚烷微乳液中脂肪酶催化拆分消旋布洛芬的研究

以手性高效液相色谱分析法为检测手段，研究了AOT-水-正庚烷微乳液反应介质中，脂肪酶催化消旋布洛芬的不对称酯合成反应。结果表明，在此反应介质中，消旋布洛芬与正辛醇能顺利地进行酯合成反应，转化率达0．3613，产物为光学纯度很高的S-构型布洛芬辛酯，其对映体过量值为0．9732。微乳液中的含水量叫。值（水与表面活性剂的摩尔数比）及AOT浓度主要影响酯合成反应转化率，对产物对映体过量值没有太大的影响；不同链长的脂肪醇不仅影响酯合成反应速率及其对应的最佳ω0值，还影响产物的对映体过量值。     

布洛芬高分子前体药物及纳米微球的合成和表征

将非甾体消炎药布洛芬以共价键连接到舍双键的甲基丙烯酸-2-羟基乙酯(HEMA)上,制成含布洛芬药物的单体,进而通过自聚或共聚,合成了含布洛芬的高分子药物;采用乳液聚合方法制备了高分子药物蚋米微球。研究了影响聚合反应的有关因素,并对所合成的产物用^1H-NMR,GPC和TEM等检测手段进行了表征。     

稀土高分子发光材料研究的新进展

介绍了稀土高分子发光材料的发光机理及其发展历程，对其合成方法以及研究方向进行了综述，着重阐述了掺杂型和键合型稀土高分子发光材料研究的最新进展，并对其发展方向和应用前景作了展望。     

赤霉素合成的研究进展

本文综述了近年来赤霉素全合成和半合成研究的进展,对有关新合成方法也作了介绍。     

树状大分子聚酰胺-胺的合成及对药物分子增溶性能研究

采用发散法合成了以乙二胺为核的1．0～3．0树状大分子聚酰胺-胺(PAMAM)．采用红外光谱和核磁共振对PAMAM的结构进行了表征，并考察了不同pH值、不同浓度的PAMAM对难溶药物布洛芬的增溶能力．结果表明：PAMAM较十二烷基苯磺酸钠(SDS)对布洛芬有较强的增溶能力，增溶量随PAMAM浓度增加而增大，其增溶机理是由于PAMAM的氨基与布洛芬的羧基之间存在静电作用．     

固相肽合成中的接肽方法

本文对固相肽合成中得到普遍应用的四种接肽方法的活化方式、反应途径、优点与不足及近年来的进展情况作了较为详细的介绍相综述。     

利用标记药物布洛芬及保泰松研究萘啶酸与血清白蛋白的结合作用

血清白蛋白与萘啶酸的结合，可以猝灭萘啶酸－铽螯合体系的特征荧光，保泰松（Ｐｈｅｎｙｌｂｕｔａｚｏｎｅ）及布洛芬（Ｉｂｕｐｒｏｆｅｎ）等药物在白蛋白的特定结合位置与其具有较强的结合作用，因此，可用作白蛋白分子结合位置的标记物。本文以保泰松或布洛芬作标记物，探讨了牛血清白蛋白及人血清白蛋白对萘啶酸－铽螯合体系特征荧光的不同影响方式，并根据蛋白结合位上药物的置换作用确定了萘啶酸在牛血清白蛋白分子上的结合位置。     

胍类化合物的制备及在有机合成中的应用

综述了胍类化合物的制备及其在有机合成中的应用，特别着重合成方法研究的 近期进展及在不对称合成中的应用。     

纳米材料的辐射合成法制备

概述了辐射合成法制备钠米材料的基本原理及最新进展，比较了辐射合成法相对于一般纳米材料制备方法的优点，并对辐射合成方法的一步发展作了展望。     

毛细管区带电泳法快速测定复方布洛芬片的有效成分

研究了用毛细管区带电泳法快速测定复方布洛芬片中布洛芬和伪麻黄碱含量的方法。在０．０２５ｍｏｌ／Ｌ的磷酸盐缓冲液（ｐＨ８．１）中，上述两组分可在３ｍｉｎ内得以完全分离，用紫外检测器在２１０ｎｍ处检测，并以外标法定量。１１次测定含有９．５ｍｇ／Ｌ盐酸伪麻黄碱和６６．７ｍｇ／Ｌ布洛芬的试样溶液，相对标准偏差为２．９％（伪麻黄碱）和１．９％（布洛芬），回收率为１０３．１％（伪麻黄碱）和９７．６％（布洛芬）。应用毛细管区带电泳法测定复方布洛芬片剂的含量，所得结果与ＨＰＬＣ法一致。     

毛细管区带电泳法快速测定复方布洛芬片的有效成分

 研究了用毛细管区带电泳法快速测定复方布洛芬片中布洛芬和伪麻黄碱含量的方法。在０．０２５ｍｏｌ／Ｌ的磷酸盐缓冲液（ｐＨ８．１）中，上述两组分可在３ｍｉｎ内得以完全分离，用紫外检测器在２１０ｎｍ处检测，并以外标法定量。１１次测定含有９．５ｍｇ／Ｌ盐酸伪麻黄碱和６６．７ｍｇ／Ｌ布洛芬的试样溶液，相对标准偏差为２．９％（伪麻黄碱）和１．９％（布洛芬），回收率为１０３．１％（伪麻黄碱）和９７．６％（布洛芬）。应用毛细管区带电泳法测定复方布洛芬片剂的含量，所得结果与ＨＰＬＣ法一致。     

Hydrolysis of ibuprofen nitrile and ibuprofen amide and deracemisation of ibuprofen using Nocardia corallina B-276

A novel application of whole cells of Nocardia corallina B-276 for the deracemisation of ibuprofen is reported. This microorganism successfully hydrolysed ibuprofen nitrile to ibuprofen amide, and ibuprofen amide to ibuprofen, using a suspension of cells in a potassium phosphate buffer solution (0.1 M, pH = 7.0). These results can be explained by the presence of NHase and amidase enzymes, but the reactions are not enantioselective and low ee values were obtained. However, (R)-ibuprofen was isolated with > 99% ee by a deracemisation process catalysed by N. corallina B-276. This is the first report of this kind of catalysis with this microorganism.     

Drug nano-domains in spray-dried ibuprofen-silica microspheres

Silica microspheres encapsulating ibuprofen in separated domains at the nanometre scale are formed by spray-drying and sol-gel processes. A detailed (1)H and (13)C NMR study of these microspheres shows that ibuprofen molecules are mobile and are interacting through hydrogen bonds with other ibuprofen molecules. (1)H magnetisation exchange NMR experiments were employed to characterize the size of the ibuprofen domains at the nanometre scale. These domains are solely formed by ibuprofen, and their diameters are estimated to be ～40 nm in agreement with TEM observations. The nature and formation of these particular texture and drug dispersion are discussed.     

Development of capillary gas chromatographic-mass spectrometric methodology for the simultaneous determination of ibuprofen and [ar-2H4]ibuprofen in serum: demonstration of kinetic equivalence in the beagle

A capillary gas chromatographic-mass spectrometric method for the determination of ibuprofen and tetra-deuterated ibuprofen in serum is described. Ibuprofen, [ar-2H4]ibuprofen and the internal standard, [ar-2H4,3,3,3-2H3]ibuprofen, are extracted (after acidification) from serum onto a cross-linked styrene divinyl benzene resin by an automated sample processor. After elution and evaporation of the organic phase, samples are reconstituted with solvent and analyzed without derivatization by capillary gas chromatography-mass spectrometry. This methodology was used to evaluate possible kinetic isotope effects after the coadministration of an equimolar mixture of ibuprofen and the deuterium-labeled covariant in the beagle. No significant differences in absorption or elimination were observed.     

Experimental and theoretical investigation of the micellar-assisted solubilization of ibuprofen in aqueous media

Surfactants can be used to increase the solubility of poorly soluble drugs in water and to increase drug bioavailability. In this article, the aqueous solubilization of the nonsteroidal, antiinflammatory drug ibuprofen is studied experimentally and theoretically in micellar solutions of anionic (sodium dodecyl sulfate, SDS), cationic (dodecyltrimethylammonium bromide, DTAB), and nonionic (dodecyl octa(ethylene oxide), C12E8) surfactants possessing the same hydrocarbon "tail" length but differing in their hydrophilic headgroups. We find that, for these three surfactants, the aqueous solubility of ibuprofen increases linearly with increasing surfactant concentration. In particular, we observed a 16-fold increase in the solubility of ibuprofen relative to that in the aqueous buffer upon the addition of 80 mM DTAB and 80 mM C12E8 but only a 5.5-fold solubility increase upon the addition of 80 mM SDS. The highest value of the molar solubilization capacity (chi) was obtained for DTAB (chi = 0.97), followed by C12E8 (chi = 0.72) and finally by SDS (chi = 0.23). A recently developed computer simulation/molecular-thermodynamic modeling approach was extended to predict theoretically the solubilization behavior of the three ibuprofen/surfactant mixtures considered. In this modeling approach, molecular-dynamics (MD) simulations were used to identify which portions of ibuprofen are exposed to water (hydrated) in a micellar environment by simulating a single ibuprofen molecule at an oil/water interface (modeling the micelle core/water interface). On the basis of this input, molecular-thermodynamic modeling was then implemented to predict (i) the micellar composition as a function of surfactant concentration, (ii) the aqueous solubility of ibuprofen as a function of surfactant concentration, and (iii) the molar solubilization capacity (chi). Our theoretical results on the solubility of ibuprofen in aqueous SDS and C12E8 surfactant solutions are in good agreement with the experimental data. The ibuprofen solubility in aqueous DTAB solutions was somewhat overpredicted because of challenges associated with accurately modeling the strong electrostatic interactions between the anionic ibuprofen and the cationic DTAB. Our results indicate that computer simulations of ibuprofen at a flat oil/water interface can be used to obtain accurate information about the hydrated and the unhydrated portions of ibuprofen in a micellar environment. This information can then be used as input to a molecular-thermodynamic model of self-assembly to successfully predict the aqueous solubilization behavior of ibuprofen in the three surfactant systems studied.     

手性HPLC法测定布洛芬立体选择性酯化的转化率和对映体过量

以脂肪酶在正己烷中催化消旋布洛芬与正丁醇的立体选择性酯化反应为例,研究了用手性ＨＰＬＣ法进行分析时产物及底物的峰面积变化与转化率的关系,确定了布洛芬丁酯与未反应布洛芬的峰面积－浓度响应因子的比值,从而可通过一次进样用峰面积直接测定布洛芬的转化率和对映体过量。     

Study of spatial distribution for the active ingredient in ibuprofen tablet based on near-infrared micro-imaging technology

The NIR micro-images of ibuprofen tablets were collected in this research.Compare correlation imaging and principal component analysis(PC A) with histogram were applied to acquire the spatial distribution of ibuprofen granule.The result indicated that a similar distribution trend can be acquired by both of the two methods mentioned above;the information of PC2 results from ibuprofen mainly since the correlation coefficient between PC2 loading vector and the NIR spectrum of ibuprofen is 0.9930.The result of PCA indicated that the information of PC2 results from ibuprofen mainly for both the low and the high content of ibuprofen in the tablets.The correlation coefficient between the data of the two PC2 loading vectors of the low and the high content of ibuprofen in the tablets is 0.9998,which indicates that the result of PCA is stable and reliable.     

Solubility of Acetaminophen and Ibuprofen in Polyethylene Glycol 600, N-Methyl Pyrrolidone and Water Mixtures

The solubility of acetaminophen and ibuprofen in binary and ternary mixtures of N-methyl pyrrolidone, polyethylene glycol 600 and water at 25 °C were determined and the solubilities are mathematically represented by the Jouyban–Acree model. The density of the solute-free solvent mixtures was measured and employed to train the Jouyban–Acree model and then the densities of the saturated solutions were predicted. The overall mean relative deviations (OMRDs) for fitting the solubility data of acetaminophen and ibuprofen in binary mixtures are 3.2% and 6.0%, respectively. The OMRDs for fitting the solubilities in ternary solvent mixtures for acetaminophen and ibuprofen are 15.0% and 28.6%, respectively, and the OMRD values for predicting all solubilities of acetaminophen and ibuprofen by a trained version of the Jouyban–Acree model are 9.4% and 17.8%, respectively. The prediction OMRD for the density of saturated solutions is 1.9%.     

Submicron particles of SBA-15 modified with MgO as carriers for controlled drug delivery

Submicron particles with modified surface were synthesized by a simple one-pot synthesis approach and used as drug carrier for controlled release. Due to the alkalinity of MgO species on the surface, the amount of a model drug, ibuprofen, adsorbed on the modified surface was increased as compared to pure silica SBA-15 although the surface area was decreased by the surface modification. FTIR investigation indicated that the adsorption state of ibuprofen on MgO modified SBA-15 was different from that on pure silica SBA-15 and pure crystal ibuprofen. The result obtained from in vitro release test exhibited that the surface modification greatly decreased the ibuprofen release rate. In first 6 h in vitro release test, only 63% of the adsorbed ibuprofen was released from the MgO/SBA-15 (Si/Mg=20). In contrast, the release of ibuprofen was complete in 1 h from the pure silica SBA-15 under the same release conditions. The surface modified with MgO created affinity with acidic ibuprofen molecules and retarded the release rate from the mesoporous matrix. In addition, the release rate of ibuprofen could be modulated by varying the content of MgO, and was found to decrease with increasing amount of MgO on surface of SBA-15 submicron particles.