TiO2的低温制备及其对有毒有机污染物的降解

溶胶水热法制备了TiO₂粉末,用X射线衍射仪(XRD)、比表面积及孔径分析仪(BET)和透射电镜(TEM)对TiO₂进行了初步表征,结果显示:纳米TiO₂主要为锐钛矿相(含板钛矿相(121)),比表面积为106.2 m²/g.在紫外光(λ≤387 nm)照射条件下,以有机染料罗丹明B(Rhodamine B,RhB)和无色小分子2,4-二氯苯酚(2,4-dichlorophenol,2,4-DCP)的紫外光(λ≤387 nm)光催化降解试验为探针反应,低温(50℃)下制备的TiO₂粉末具有较高光催化活性,对RhB和2,4-DCP有较好的降解效果.通过分析紫外-可见光谱(UV-Vis)、红外光谱(FTIR)和总有机碳(TOC)测定,发现TiO₂/UV体系能使RhB和2,4-DCP发生有效的降解,反应5 h后RhB和7 h后2,4-DCP的矿化率分别达到81.2%和86.8%.同时,采用辣根过氧化物酶(POD)、N,N-二乙基对苯二胺(DPD)分光光度法和苯甲酸荧光光度法分别测定了在降解过程中H₂O₂和羟基自由基(.OH)的变化,表明TiO₂光催化机理涉及到.OH历程.     

铕掺杂TiO2的制备及其可见光光催化性能研究

采用溶胶-凝胶法制备了不同铕(Eu)掺杂量的TiO₂纳米颗粒(Eu-TiO₂),利用透射电镜(TEM),X射线光电子能谱(XPS),X射线衍射(XRD)及紫外可见漫反射(UV-Vis DRS)等方法对Eu-TiO₂进行了物理特性的初步表征.结果表明:与未掺杂纳米TiO₂比较,Eu-TiO₂禁带宽度变窄,具有可见光光催化活性.在可见光下(λ≥420 nm)照射下,以光催化降解染料罗丹明B(Rhodamine B,RhB)为目标反应,探讨了Eu-TiO₂不同制备条件对RhB降解光催化活性的影响,优化得到制备高活性Eu-TiO₂最佳pH为3、掺杂比例(n_Eu/n_Ti)为0.05%、煅烧温度为500 ℃.研究了可见光照射下Eu-TiO₂降解RhB和无色有机小分子水杨酸(SA)光催化反应条件及降解特性,RhB的12 h深度氧化矿化率为60.2%,SA的8 h降解率达到100%.通过跟踪测定可见光下Eu-TiO₂光催化反应过程中氧化物种的变化,研究了可见光激发Eu-TiO₂光催化反应机理,表明其光催化反应主要涉及羟基自由基(·OH)历程.     

LaNiO3/TiO2纳米管阵列的电化学制备及其光催化性能

利用脉冲电沉积与高温退火相结合的方法制备了镍酸镧(LaNiO₃)纳米颗粒负载的二氧化钛(TiO₂)纳米管阵列. 修饰于TiO₂纳米管阵列上的LaNiO₃纳米颗粒粒径小（< 10 nm）、分布均匀、负载量可控,一些LaNiO₃纳米颗粒沉积于TiO₂纳米管内. 紫外可见吸收光谱显示,LaNiO₃/TiO₂纳米管阵列的吸收带边较TiO₂纳米管阵列明显红移,可见光吸收明显增强. 可见光下光催化降解罗丹明B（RhB）的结果表明,脉冲循环沉积500次制得的LaNiO₃/TiO₂纳米管阵列的光催化活性最佳,其对RhB光催化降解速率是TiO₂纳米管阵列的3.5倍,并且表现出极好的光催化稳定性.     

席夫碱铁-TiO2复合物光催化降解有毒有机污染物

运用化学合成方法制备了双(5-磺酸钠水杨醛)邻苯二胺席夫碱[N,N -Bis-schiff-base-5-sulfonate-salicylalidene- o-phenylenediamine sodium, SSPA]铁(III)配合物(FeSSPA), 采用无机钛盐醇解法制备了席夫碱铁-TiO₂复合物催化剂(FeSSPA-TiO₂). 通过紫外-可见反射光谱(UV-Vis DRS)、透射电镜(TEM)对制备催化剂进行了表征. 利用FeSSPA-TiO₂可见光(λ＞420 nm)激发活化分子氧降解有机染料罗丹明B (Rhodamine B, RhB)、无色小分子2,4-二氯苯酚(2,4-Dichlorophenol, 2,4-DCP)及水杨酸(Salicylic acid, SA), 研究了FeSSPA-TiO₂的光催化性能. 结果表明, FeSSPA-TiO₂光催化剂在pH 6.7, 可见光照射条件下, 80 min RhB褪色率达到100%, 20 h小分子2,4-DCP, SA的降解率分别达到67%, 100%. 在实验条件下, 33 h对RhB矿化率达到70.5%. 通过反应过程中氧化物种的测定, 发现降解过程主要涉及超氧自由基( )的氧化机理.     

Hg掺杂CdS的制备及可见光降解有毒有机污染物

采用镉硫共沉淀方法制备了Hg掺杂CdS(Hg_xCd_1-xS)光催化剂,运用X射线衍射法(XRD)、X射线光电子能谱(XPS)、透射电镜(TEM)和紫外-可见吸收光谱对所制备的催化剂进行了表征;利用可见光催化降解罗丹明B(Rhodi-amine B,RhB)和2,4-二氯苯酚(2,4-dichlorophenol,2,4-DCP)为探针反应,对Hg_xCd_1-xS可见光催化活性进行了研究,通过跟踪RhB降解过程中吸收光谱的变化和总有机碳(TOC),评价了Hg_xCd_1-xS对有机物的氧化降解及深度矿化能力.结果表明:Hg_xCd_1-xS催化剂为立方晶型,Hg的最佳掺杂量为5%,其禁带宽度约为2.15 eV,对RhB和2,4-DCP均有较好的降解效果,实验条件下30 min RhB褪色率为100%,RhB的30 h矿化率为45.5%,2,4-DCP的16 h降解率达55%.Hg_xCd_1-xS可见光光催化降解RhB具有较高的稳定性,Hg的掺杂能有效降低CdS光腐蚀问题.通过ESR跟踪测定光催化反应过程中产生的自由基,表明降解过程涉及·OH机理.     

乙酸修饰Ag/TiO2复合光催化剂的制备及协同催化性能

利用光化学还原法制备了Ag/TiO₂,然后通过乙酸浸渍制备了HAc-Ag/TiO₂复合光催化剂.利用X射线衍射（XRD）、透射电子显微镜（TEM）、傅里叶变换红外光谱（FTIR）、X射线光电子能谱（XPS）和紫外-可见漫反射光谱（UV-Vis DRS）等手段表征了催化剂的性质.以降解水溶液中的甲基橙（MO）为探针反应,考察了催化剂在可见光下的光催化性能.结果表明,乙酸对TiO₂的修饰在TiO₂禁带中产生了"带尾",使TiO₂的禁带宽度发生了显著的缩减;Ag纳米粒子和乙酸共同修饰的HAc-Ag/TiO₂样品具有更窄的禁带宽度和更正的价带顶位置;Ag和乙酸的协同作用使HAc-Ag/TiO₂具有良好的可见光催化活性：可见光照射2 h后,甲基橙在HAc-Ag/TiO₂上的降解率接近100%.     

2D/3D ZnIn2S4/TiO2复合物的原位构筑及其提高的光催化性能

通过高温煅烧和油浴的方法构筑二维/三维(2D/3D) ZnIn₂S₄/TiO₂异质结, 应用于光催化降解罗丹明B (RhB)和四环素(TC), 来研究异质结的构筑对TiO₂可见光响应范围和光生载流子对分离效率的影响. 结果表明, TiO₂维持了MOFs的形貌, 显示窄的可见光响应范围和高的光生电荷复合率, 与ZnIn₂S₄纳米片复合后, TiO₂的比表面积增大, 光催化活性位点增多. 带隙宽度也由TiO₂的3.23 eV减小到ZnIn₂S₄/TiO₂-II的2.52 eV, 从而获得了更宽的可见光响应范围. 能带结构表明ZnIn₂S₄/TiO₂是type II型异质结, 提高了光生载流子对的分离与转移效率. 在可见光照射下, ZnIn₂S₄/TiO₂-II显示了最高的RhB光催化降解效率(93%), 分别是TiO₂和ZnIn₂S₄的18和2倍. 同时, ZnIn₂S₄/TiO₂-II也显示出比TiO₂和ZnIn₂S₄更高的TC降解效率(90%). 循环实验表明ZnIn₂S₄/TiO₂-II能保持良好的稳定性, 经5次循环实验后仍能降解83%的RhB. 研究表明基于MOFs衍生的TiO₂构筑2D/3D ZnIn₂S₄/TiO₂异质结是提高TiO₂光催化性能的一条有效途径.     

TiO2-SA纳米光催化材料接枝动力学、结构及性能

采用后处理表面改性法在纳米TiO₂表面接枝水杨酸(SA)(TiO₂-SA), 分别考察了超声搅拌、溶剂、物料比、pH值及温度等因素对接枝过程及光催化材料性能的影响, 并研究了接枝反应动力学. 通过傅里叶变换红外(FT-IR)光谱、X射线光电子能谱(XPS)、X射线衍射(XRD)等对TiO₂-SA纳米光催化材料进行了结构表征, 并提出了结构模型. 通过接触角测定、同步热分析(热重-差示扫描量热法(TG-DSC))、紫外-可见漫反射光谱(UV-VisDRS)、扫描电子显微镜(SEM)对光催化材料进行了性能表征. 结果表明, 水杨酸改性纳米TiO₂可以提高疏水性及分散性, 减缓在溶剂中的沉降速度, 并能稳定吸附在油-水界面, 实现了光谱响应范围向可见光的拓展. 在紫外光照射下, TiO₂-SA表现出优异的光催化降解硝基苯性能.     

可见光/Fenton光催化降解有机染料

采用Fenton试剂(Fe³⁺/H₂O₂)在可见光条件下(λ＞450nm)光催化降解目标染料化合物罗丹明B(RhodamineB,RhB).在pH＜3.0体系中用可见光照射,能使RhB染料在光敏化作用下有效降解,反应160min后矿化率达到71.8%.采用ESR和溴甲酚绿(Bromocresolgreen,BCG)法跟踪测定活性氧化物种,通过对RhB降解过程的紫外-可见光谱、红外光谱分析及总有机碳量(TOC)跟踪测定,结果表明,Fe³⁺/H₂O₂/RhB体系在可见光照射下主要的活性氧化物种为羟基自由基,能有效地降解RhB.     

3D ZnIn2S4微球/1D TiO2纳米带异质结构的光催化降解和还原性能

首先采用溶剂热法和高温煅烧法制备1D TiO₂纳米带,其次利用溶剂热法将1D TiO₂纳米带均匀地穿插到片层结构组装而成的3D ZnIn₂S₄微球中,所形成的异质结构能有效抑制光生电子-空穴的复合。二元ZnIn₂S₄微球/TiO₂纳米带复合光催化剂在高浓度染料罗丹明B(RhB)的光降解和Cr(VI)的光还原实验中表现出优异的性能。在模拟太阳光照射下,ZnIn₂S₄/TiO₂纳米带光催化降解RhB和还原Cr(VI)的效率相较于纯TiO₂颗粒(10%,22%)、TiO₂纳米带(45%,40%)、ZnIn₂S₄(62%,65%)、ZnIn₂S₄/TiO₂颗粒(90%,91%)分别提高至100%和100%。最后,通过紫外-可见...     

Visible light-sensitized semiconductor photocatalytic degradation of 2,4-dichlorophenol

Sensitized-photocatalytic decomposition of 2,4-dichlorophenol (2,4-DCP) using xan-thene dyes as photosensitizer on TiO2 particles under visible light irradiation was studied. 2,4-DCP can be decomposed efficiently by this method and the decomposition efficiency of 2,4-DCP decreases in the following order: eosin Y ≈ rose bengal > erythrosine B > rhodamine B.     

Electrospun nanofibers of TiO2/CdS heteroarchitectures with enhanced photocatalytic activity by visible light

Herein, we have demonstrated that the electrospun nanofibers of TiO(2)/CdS heteroarchitectures could be fabricated through combining electrospinning technique with hydrothermal process. The configuration, crystal structure, and element composition of the as-prepared TiO(2)/CdS heteroarchitectures were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray diffraction (XRD), resonant Raman spectrometer, X-ray photoelectron spectroscopy (XPS). The results indicated that the high-density hexagonal wurtzite CdS crystalline particles of ca. 6-40 nm in diameter were uniformly and closely grown on anatase TiO(2) nanofibers. Especially, the light-absorption properties as well as photocatalytic characteristics of pure TiO(2) nanofibers and TiO(2)/CdS heteroarchitectures with different amount loading of CdS were also investigated. The absorption of TiO(2)/CdS heteroarchitectures was extended to the visible due to effective immobilization of sensitizing agent CdS on TiO(2). In contrast with the pure TiO(2) nanofibers, the TiO(2)/CdS heteroarchitectures showed excellent photocatalytic activity by using rhodamine B dye as a model organic substrate under visible-light irradiation. It was worth noting that the cooperative photocatalytic mechanism of the TiO(2)/CdS heteroarchitectures was also discussed.     

溶胶-凝胶-水热法制备Ce-Si/TiO2及其可见光催化性能

以钛酸四正丁酯、正硅酸乙酯、六水硝酸铈为原料, 在140 ℃下通过溶胶-凝胶-水热法水解制备Ce-Si/TiO2. 所得样品用X射线衍射、氮吸附、透射电镜、紫外漫反射、傅里叶变换红外光谱、X射线光电子能谱等测试手段分析, 结果显示400-600 ℃条件下焙烧所有样品均为锐钛矿, 样品具有较大的比表面积, Si和Ce均被引入到TiO2中. 在可见光照射下, 以脱色降解罗丹明B为探针反应, 研究其可见光催化性能, 结果表明, 与未掺杂和单一组分掺杂的二氧化钛相比较, 共掺杂的二氧化钛具有更高的催化性能, 当Ce/Ti和Si/Ti的物质的量比分别为0.010和0.10时,可见光催化性能最好.     

The synthesis, structure, optical and photocatalytic properties of silica-coated cadmium sulfide nanocomposites of different shapes

The CdS nanostructure undergoes photochemical dissolution, and hence, the photocatalytic activity deteriorates with light irradiation time. A thin layer of silica coating over CdS surface may prevent the photocorrosion and coalescence of quantum size CdS particles. Hence, we synthesized SiO(2)@CdS nanocomposites of different shapes and characterized them by XRD, HRTEM, EDX, SAED, BET surface area measurement and absorption and emission study. The dispersion of spherical CdS (Cd-2.62 at% and S-2.33 at%) nanoparticles of cubic crystal structure into thick amorphous SiO(2) (43.79 at%) matrix is demonstrated here. The fabrication of core (CdS)-shell (SiO(2)) structure (SiO(2)@CdS) consisting of CdS nanorod (Cd-19.79 at% and S-22.90 at%) core (length ~126 nm and width ~6 nm) having characteristic lattice fringes of hexagonal crystals and thin SiO(2) (12.81 at%) shell (thickness=1-1.4 nm) is successfully achieved for the first time. The surface area (21.2m(2)/g) of CdS nanorod (aspect ratio=21) is found to increase (42.3m(2)/g) after SiO(2) coating. The photoluminescence of CdS nanosphere (485 nm) and nanorod (501 nm) is highly quenched after SiO(2) layer formation. The superior photocatalytic activity of SiO(2)@CdS composites for the benzaldehyde oxidation under UV irradiation has been displayed.     

原位合成具有高可见光催化活性的C3N4/CdS纳米复合材料

以硫氰酸铵和氯化镉为原料,采用无模板混合高温煅烧法一步合成氮化碳/硫化镉纳米晶(C3N4/CdS)的复合半导体材料。采用X射线衍射、傅立叶变换红外光谱和透射电镜等技术对其结构和形貌进行了表征。以有机污染物罗丹明B (RhB)为模拟污染物对复合催化剂的可见光催化活性进行测试。结果表明, C3N4/CdS复合材料中CdS以六方相纳米晶的形式均匀分散; CdS的复合基本不改变C3N4主体结构及聚合度;与纯C3N4相比,复合材料在可见区的光吸收能力有所增强。合适的能带匹配有利于光生载流子的迁移,抑制了其复合速率。在可见光照射下,复合半导体能够更加快速的降解有机污染物,且保持很好的稳定性。     

Change of adsorption modes of dyes on fluorinated TiO2 and its effect on photocatalytic degradation of dyes under visible irradiation

Surface-fluorinated TiO2 (F-TiO2) particles were prepared via the HF etching method. The surface characteristics of fluorinated TiO2, the adsorption modes of dyes, and the reaction pathways for the photocatalytic degradation of dye pollutants under visible light irradiation were investigated. It was found that, in the treatment of TiO2 by HF etching, F(-) not only displaces surface HO(-) but also substitutes some surface lattice oxygen. Using zwitterionic Rhodamine B (RhB) dye as a model, the change of the adsorption mode of RhB on F-TiO2 relative to that on pure TiO2 was validated by adsorption isotherms, X-ray photoelectron spectroscopy (XPS), and IR techniques for the first time. RhB preferentially anchors on pure TiO2 through the carboxylic (-COOH) group, while its adsorption group is switched to the cationic moiety (-NEt 2 group) on F-TiO2. Both the photocatalytic degradation kinetics and mechanisms were drastically changed after surface fluorination. Dyes with positively charged nitrogen-alkyl groups such as methylene blue (MB), malachite green (MG), Rhodamine 6G (Rh6G), and RhB all underwent a rapid N-dealkylation process on F-TiO2, while on pure TiO2 direct cleavage of dye chromophore ring structures predominated. The relationship between surface fluorination and the degradation rate/pathway of dyes under visible irradiation was also discussed in terms of the effect of fluorination on the surface adsorption of dyes and on the energy band structure of TiO2.     

Efficient degradation of toxic organic pollutants with Ni2O3/TiO(2-x)Bx under visible irradiation

To promote efficient use of solar energy, many studies have focused on the modification of TiO2 to extend its spectral response to visible region. Here we report a combined modification of TiO2 by two components: the nonmetal element boron and the metal oxide Ni2O3. The photocatalyst presents high photocatalytic activity in the visible region, which can efficiently degrade and mineralize toxic organic pollutants such as trichlorophenol (TCP), 2,4-dichlorophenol (2,4-DCP), and sodium benzoate. The dechlorination and mineralization results indicate the photocatalytic pathway via visible light excitation. The study demonstrates that the modification of TiO2 both to extend its spectral response to the visible region and to improve its catalytic efficiency can be achieved by doping with boron, a nonmetal, and Ni2O3, a metal oxide.     

Synthesis of cubic Ag@AgCl and Ag@AgBr plasmonic photocatalysts and comparison of their photocatalytic activity for degradation of methyl orange and 2,4-dichlorophenol

Uniform cubic Ag@AgCl and Ag@AgBr plasmonic photocatalysts with side length of 0.7 µm were synthesized by a facile green route, in which a controllable double-jet precipitation technique was employed to fabricate homogeneous cubic AgCl and AgBr grains while a photoreduction process was used to produce Ag nanoparticles (NPs) on the surface of AgCl and AgBr grains. The synthesized samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, X-ray photoelectron spectroscopy (XPS), and ultraviolet–visible (UV–Vis) diffuse reflectance spectroscopy (DRS). The photocatalytic activities of Ag@AgCl and Ag@AgBr were compared using degradation of methyl orange (MO) dye and 2,4-dichlorophenol (2,4-DCP) under visible-light irradiation. Ag@AgBr showed higher photocatalytic activity for MO degradation but weaker activity for 2,4-DCP decomposition. Possible degradation mechanisms are proposed to interpret these contrary paradoxical experimental results.