VOCs催化燃烧Pd-Y/不锈钢丝网催化剂的性能

采用经阳极氧化工艺处理后的不锈钢丝网作为催化剂载体,制备了Pd-Y/不锈钢丝网催化剂。考察了该催化剂对典型的挥发性有机物(VOCs)(甲苯、丙酮和乙酸乙酯)的催化燃烧性能,并用SEM、TPR技术对催化剂的形貌和氧化膜的结构组成进行了表征。结果表明：采用阳极氧化技术在不锈钢表面形成致密的多孔氧化膜,有利于活性组分的负载及均匀分散,明显提高了催化剂的燃烧活性和稳定性,延长了催化剂的使用寿命。Pd-Y/不锈钢丝网催化剂上3种VOCs的完全氧化温度分别为220、280和320 ℃。控制甲苯进料浓度为4～6 g·m     

甲苯、丙酮和乙酸乙酯在新型铂-钯/不锈钢丝网催化剂上的催化氧化

采用阳极氧化法制备了一种用于催化氧化处理挥发性有机化合物(VOCs)的0.1%Pt-0.5%Pd/不锈钢丝网(SSWM)催化剂. 活性测试结果表明, 0.1%Pt-0.5%Pd/不锈钢丝网催化剂具有较高的催化活性和热稳定性. 该催化剂上甲苯、丙酮和乙酸乙酯的完全氧化温度分别为220、260和280 ℃. 通过扫描电镜(SEM)、X射线光电子能谱(XPS)和超声波等手段对催化剂和不锈钢丝网进行了表征. SEM结果表明, 经阳极氧化工艺处理过的不锈钢金属丝网载体表面形成了一层沟壑形态的复合氧化膜. 该阳极氧化膜有利于活性组分Pd、Pt的分散.     

0.1%Pt-0.02%Pd/不锈钢整体催化剂上丙酮氧化性能及稳定性(英文)

制备了0.1%Pt-0.02%Pd/不锈钢整体催化剂。选取不锈钢为该催化剂的载体,可克服传统γ-Al2O3和堇青石蜂窝载体热稳定性差的缺点。采用阳极氧化技术在不锈钢上自生长了结构致密的多孔阳极氧化膜,并在其上负载Pt和Pd制备得到挥发性有机物(VOCs)净化催化剂。结果表明,经500、800和1000℃不同温度焙烧后,该催化剂完全氧化丙酮的温度分别为160、160和200℃。该催化剂表现出以下优点:(a)高温稳定性能好;(b)低温催化活性高;(c)贵金属负载量低。通过SEM和EDX等技术对该催化剂的结构及活性组分分散情况进行了表征。     

不锈钢丝网上Cu基催化剂的制备及反应性能

采用阳极氧化技术在不锈钢丝网上成功地自生长了结构致密的氧化物膜,并以此为载体,通过电化学沉积工艺制备了Cu/不锈钢丝网催化剂。以甲苯、丙酮、乙酸乙酯及二氯甲烷为模型反应,考察了4种不同种类挥发性有机化合物(VOCs)在该催化剂上的完全氧化活性。结果表明电化学沉积时间为15 min制备得到的催化剂上完全氧化丙酮、甲苯、乙酸乙酯及二氯甲烷的温度分别为240、220、260和440℃。在220℃反应条件下进行60 h的甲苯氧化稳定性试验结果显示该催化剂催化氧化甲苯的转化率一直保持98%以上,表现出较好的稳定性。扫描电镜,X射线衍射及X射线光电子能谱等表征结果表明,不锈钢丝网载体表面的阳极氧化物膜有利于提高活性组分的分散度。设计采用电沉积工艺大大提高了催化剂表面活性物种与载体的结合牢固度。     

铈的引入对负载钯阳极氧化膜不锈钢丝网催化剂结构和性能的影响

通过阳极氧化技术制备了一种新型的0.75%Ce-0.5%Pd/不锈钢丝网催化剂. 采用扫描电镜(SEM)和程序升温还原技术(TPR)对催化剂进行了表征. 考察了稀土铈的引入对催化剂上甲苯、丙酮和乙酸乙酯氧化活性的影响, 结果显示, 在不锈钢丝网载体表面处理过程中引入阳极氧化技术, 使之自组织生长了一层多孔氧化膜, 提供了活性组分CeO2和Pd相互作用的平台. 氧化铈的引入, 使不锈钢丝网载体表面的多孔氧化膜形成了独特的海绵状蜂窝结构, 有利于活性组分Pd的分散锚定. 0.75%Ce-0.5%Pd/不锈钢丝网催化剂对甲苯、丙酮和乙酸乙酯的完全转化温度分别为200, 240和260 ℃, 具有良好的催化消除活性. 催化剂的反应活性与稀土CeO2的引入及其在阳极氧化膜上形成独特的形貌有关.     

Ce-Pt-Pd/不锈钢丝网催化剂的制备与催化性能

采用阳极氧化技术在不锈钢丝网上自生长了一层结构致密的阳极氧化膜,并以此为载体,制备出一种高活性、高稳定性的负载型Ce-Pt-Pd催化剂.考察了该系列催化剂对甲苯、丙酮和乙酸乙酯的氧化活性,并用扫描电镜、X射线光电子能谱和程序升温氧化技术对催化剂进行了表征.结果表明,不锈钢丝网载体表面自生长的氧化物膜十分有利于活性组分的负载,制得的催化剂具有较高的催化燃烧有机化合物的活性和稳定性.     

Pt/CexZr1-xO2催化剂上丙烷完全氧化性能研究

采用沉淀法制备了ZrO2,CeO2和Ce0.7Zr0.3O2载体,并用浸渍法制备负载型Pt催化剂。考察了500和900℃焙烧催化剂的丙烷完全氧化性能和水汽对丙烷氧化反应的影响。对于500℃焙烧的催化剂,催化剂的丙烷氧化活性顺序为:Pt/ZrO2-500>Pt/CeO2-500>Pt/Ce0.7Zr0.3O2-500;而经900℃焙烧的催化剂活性顺序为:Pt/ZrO2-900>Pt/Ce0.7Zr0.3O2-900>Pt/CeO2-900。反应气氛中水汽的存在对两种Pt/ZrO2催化剂的活性均有抑制作用(T50温度均提高了10~15℃);而对于Pt/CeO2-500催化剂有抑制作用(T50温度提高10℃),但对Pt/CeO2-900催化剂活性有促进作用(T50温度下降25℃);对于两种Pt/Ce0.7Zr0.3O2催化剂活性具有促进作用(T50温度均下降5~25℃)。表征结果表明催化剂的活性与其表面Pt物种价态密切相关,催化剂表面上Pt0物种有利于活性的提高。Pt/Ce0.7Zr0.3O2-500催化剂中只含有氧化态Pt物种(Pt^2+),而Pt/Ce0.7Zr0.3O2-900催化剂中则含有部分金属态Pt物种,因此其活性高于Pt/Ce0.7Zr0.3O2-500催化剂。     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.