聚合物前驱体热解制备SiC纳米线研究

采用催化剂辅助聚合物前驱体热解工艺制备出宏量碳化硅纳米线(Si CNW),研究了基底材料、热处理温度及催化剂加载量等参数对所制备Si CNW微观结构形貌的影响规律.借助扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射分析(XRD)等分析测试手段对Si CNW的晶体结构和微观形貌进行表征,并分析了其生长机制.研究结果表明:制备的Si CNW为面心立方单晶结构的β-Si C,平均直径约为400 nm.随着热处理温度的提高,Si CNW的形貌由弯曲状生长转变为直线状生长,纳米线的直径也随之增加,在高温出现链珠状形貌纳米线;随着催化剂加载量的增加,纳米线的直径逐渐提高,产量却有所减小.纳米线的生长过程主要遵循VLS机制.当热解温度为1 600℃,基底材料为碳纤维布,催化剂加载量为5%(质量分数)时制备的Si C纳米线的直径、数量和分布状况较为理想.     

氧化铜纳米片的水热合成与表征

利用水热法一步制备了形貌均一的氧化铜纳米片,借助场发射扫描电子显微镜、X射线粉末衍射仪和透射电子显微镜分析了产物的形貌和晶体结构;并研究了反应物浓度及表面活性剂等因素对氧化铜纳米结构的影响.结果表明,以氢氧化钠作为碱源时,在不添加任何表面活性剂的情况下,随着氢氧化钠浓度的升高,纳米片的尺寸减小、厚度增大;此外,通过添加不同的表面活性剂可以得到不同形貌的氧化铜纳米结构.     

表面活性剂种类对纳米氧化锌形貌的影响

利用简单的水热法,以Zn(Ac)2.2H2O为锌源,通过调整表面活性剂的种类及碱源,制备了一系列不同形貌的纳米结构氧化锌;利用场发射扫描电子显微镜和X射线粉末衍射仪分析了产物的形貌和晶体结构,并探讨了多种表面活性剂和醋酸钠碱源对氧化锌纳米结构的影响.结果表明,以NaOH作为碱源时,在不添加任何表面活性剂的情况下,产物的形貌结构与氢氧化钠的加入量有关,当n(Zn2+)∶n(OH-)为1∶2.5、1∶10及1∶20时,分别得到片状、棒状及海胆状纳米结构的氧化锌;产物均为六方相氧化锌.     

铅纳米线阵列的制备

使用电化学沉积方法,在有序的氧化铝模板(AAO)孔洞中制备了铅纳米线有序阵列。用X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)对样品的结构、形貌、进行表征和观测。XRD的结果表明所制备的样品为纯的立方面心铅,且纳米线生长沿<220>有很好的取向。FE-SEM的图片清晰地说明铅纳米线阵列是大面积、高填充率和高度有序的。TEM的结果显示纳米线直径均匀、表面光滑且长径比大。     

层状溶致液晶中电沉积铂纳米线

以非离子表面活性剂四氧乙烯基正十二烷基醚与氯铂酸水溶液构建层状溶致液晶, 通过电沉积技术制备了金属铂纳米线. 分别采用偏光显微镜、小角X射线散射对液晶进行结构分析, 通过透射电镜和能量弥散X射线谱分析观测产物形貌并确定其组成. 结果表明, 相对于饱和甘汞电极, 沉积电势在0.05～0.20 V范围内, 金属铂沿表面活性剂双分子层膜生长, 反应前后液晶相的长程周期性结构无明显变化; 在0.10 V沉积电势下, 随反应时间从960 s延长至3840 s, 去除表面活性剂后沉积产物分别为层状纳米粒子、层状纳米线以及长度达十几微米且致密的纳米线. 讨论了层状液晶对沉积产物的结构导向作用.     

熔盐电解SiO2/C直接制备SiC纳米线

采用纳米SiO₂和酚醛树脂为原料制备酚醛树脂裂解碳纳米SiO₂复合阴极(硅碳物质的量的比为1:1),直接电解PFC/SiO₂复合阴极,在900℃熔融盐CaCl₂中,恒槽压2.0V下电解,制备出碳化硅纳米线。采用场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)及其附带的能谱仪、X射线分析衍射仪(XRD)和拉曼光谱(Raman)对产物的组成、形貌、微观结构等进行了表征。结果表明:碳化硅纳米线呈立方晶体结构,其直径为4~13nm,长可达数微米;室温下该纳米线在415nm和534nm附近有宽的发光峰。最后,讨论了碳化硅纳米线的生成机制。     

熔盐电解SiO2/C直接制备SiC纳米线

采用纳米SiO₂和酚醛树脂为原料制备酚醛树脂裂解碳纳米SiO₂复合阴极(硅碳物质的量的比为1∶1),直接电解PFC/SiO₂复合阴极,在900 ℃熔融盐CaCl₂中,恒槽压2.0 V下电解,制备出碳化硅纳米线。采用场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)及其附带的能谱仪、X射线分析衍射仪(XRD)和拉曼光谱(Raman)对产物的组成、形貌、微观结构等进行了表征。结果表明：碳化硅纳米线呈立方晶体结构,其直径为4~13 nm,长可达数微米;室温下该纳米线在415 nm和534 nm附近有宽的发光峰。最后,讨论了碳化硅纳米线的生成机制。     

大面积Bi单晶纳米线阵列的制备

在有序的氧化铝模板(AAO)的孔洞中, 采用电化学沉积工艺成功地制备了准金属Bi纳米线有序阵列. 使用X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)及高分辨电子显微镜(HRTEM)对样品的结构和形貌进行了表征. XRD结果表明, 所制备的铋样品为六方相, 且沿[110]方向有很好的生长取向; FE-SEM图片清晰地说明铋纳米线阵列是大面积、填充率高和高度有序的; TEM的结果显示纳米线直径均匀、表面光滑且长径比大; HRTEM图片中清晰的晶格条纹和选区电子衍射(SAED)结果表明纳米线是单晶.     

TiO2/聚丙烯酸丁酯纳米复合薄膜的制备及结构表征

利用微乳液原位聚合法在普通玻璃表面上制备了TiO2/聚丙烯酸丁酯纳米复合膜.采用傅立叶变换红外光谱、高分辨透射电子显微镜和X射线光电子能谱对膜的结构进行了表征.结果表明， TiO2以纳米线的形式弥散在聚丙烯酸丁酯的高分子网络中，并且所制备的TiO2纳米线具有板钛矿相结构.     

水热法制备ZnS纳米线

以十六烷基三甲基溴化铵(CTAB)为表面活性剂，利用水热法通过二吡啶硫氰酸锌分解制备了ZnS纳米线，并用SEM、XRD、EDX和HR-TEM等方法对其纳米结构进行了表征。实验结果表明，反应时间和表面活性剂浓度是决定纳米ZnS最终形貌的关键因素，CTAB起到了纳米线生长的分子-诱导模板作用。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.