钙钛矿型LaxSr1－xNi1－yCoyO3光电催化活性研究

用甘氨酸-硝酸盐燃烧合成法, 制备La_xSr_1－xNi_1－yCo_yO₃复合氧化物的陶瓷粉末, 对钙钛矿氧化物进行了XRD结构分析. 在通氧或不通氧下测试氧还原和氧析出的循环伏安曲线. 结果表明: 该氧电极具有双功能催化特性, 但不完全可逆. 利用汞灯作为激发光源, 进行几种水溶性染料和五种混合染料光解实验, 利用紫外-可见、红外以及人工神经网络光度法研究La_xSr_1－xNi_1－yCo_yO₃的催化性能. 结果表明: La_xSr_1－xNi_1－yCo_yO₃ (x＝0.7, 0.9, 1; y＝0.3, 0.75)复合氧化物都具有较强光催化特性; La_xSr_1－xNi_1－yCo_yO₃的光催化活性高于La_xSr_1－xNiO₃, 这与B位离子(Ni^2—, Co^2－)的电子构型有关; Co^2＋的加入可使La_xSr_1－xNiO₃的光催化活性有所提高.     

空气中合成固溶体荧光粉Ba2(Zn, Mg)Si2O7:Ce3+,Eu2+,Eu3+及其发光特性

采用高温固相法在空气中合成了Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu,yCe³⁺系列荧光粉。分别采用X-射线衍射和荧光光谱对所合成荧光粉的物相和发光性质进行了表征。在紫外光330~360 nm激发下,固溶体荧光粉Ba_1.97-yZn_1-xMg_xSi₂O₇:0.03Eu的发射光谱在350~725 nm范围内呈现多谱峰发射,360和500 nm处有强的宽带发射属于Eu²⁺离子的4f⁶5d¹-4f⁷跃迁,590~725 nm红光区窄带谱源于Eu³⁺的⁵D₀-⁷F_J (J=1,2,3,4)跃迁,这表明,在空气气氛中,部分Eu³⁺在Ba_1.97-yZn_1-xMg_xSi₂O₇基质中被还原成了Eu²⁺;当x=0.1时,荧光粉Ba_1.97Zn_0.9Mg_0.1Si₂O₇:0.03Eu的绿色发光最强,表明Eu³⁺被还原成Eu²⁺离子的程度最大。当共掺入Ce³⁺离子后,形成Ba_1.97-yZn_0.9Mg_0.1Si₂O₇:0.03Eu,yCe³⁺荧光粉体系,其发光随着Ce³⁺离子浓度的增大由蓝绿区经白光区到达橙红区;发现名义组成为Ba_1.96Zn_0.9Mg_0.1Si₂O₇:0.01Ce³⁺,0.03Eu的荧光粉的色坐标为(0.323,0.311),接近理想白光,是一种有潜在应用价值的白光荧光粉。讨论了稀土离子在Ba₂Zn_0.9Mg_0.1Si₂O₇基质中的能量传递与发光机理。     

CeCl3-CdCl2-H2O和CeCl3-CdCl2-HCl-H2O的相平衡

测定了三元系CeCl₃-CdCl₂-H₂O (25 ℃)和四元系CeCl₃-CdCl₂-HCl(～8.4％)-H₂O(25 ℃) 的相平衡溶度数据,绘制了相应的溶度图.该三元系是由5个固相区CdCl₂&;#8226;2.5H₂O(原始盐)、CdCl₂&;#8226;H₂O(原始盐)、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O、4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O、CeCl₃&;#8226;7H₂O(原始盐)组成的复杂体系.该四元系是由5个固相区CdCl₂&;#8226;H₂O(原始盐)、9CdCl₂&;#8226;CeCl₃&;#8226;19H₂O、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O、4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O、CeCl₃&;#8226;7H₂O(原始盐)组成的复杂体系.其中6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O在该三元系是介稳化合物.9CdCl₂&;#8226;CeCl₃&;#8226;19H₂O 、6CdCl₂&;#8226;CeCl₃&;#8226;14H₂O和4CdCl₂&;#8226;CeCl₃&;#8226;12H₂O用X射线粉末衍射及TG-DTG和DSC等方法进行了研究,并对X射线粉末衍射进行了指标化.     

纳米钙钛矿LaxSr1-xFe1-yCoyO3复合氧化物的制备和表征

用甘氨酸-硝酸盐燃烧合成法，制备La_xSr_1-xFe_1-yCo_yO₃复合氧化物的陶瓷粉末，对该钙钛矿型氧化物进行了XRD、IR、紫外漫反射光谱及循环伏安曲线分析。结果表明：该复合氧化物粉体平均晶粒为15.3～29.8 nm,为立方和正交晶系。该氧电极具有双功能催化特性，但不完全可逆。对水溶液染料进行光解实验，利用紫外-可见、人工神经网络光度法研究La_xSr_1-xFe_1-yCo_yO₃的催化性能。结果表明：CO²⁺的加入可使La_xSr_1-xFeO₃的光催化活性有所提高，B位离子(Fe³⁺，CO²⁺)改变与加入，使La_xSr_1-xFe_1-yCo_yO₃(x=0.7，0.3；y=0.3，0.9，1)光催化活性高于La_xSr_1-xFeO₃。同时，对5种染料进行紫外光解，在0.75 h，脱色率大于91%，并为动力学一级反应。     

层状O2结构锂锰氧化物Li0.60[MgxCoyMn1-x-y]O2的制备及结构表征

本文采用离子交换法分别制备了双复合锂锰氧化物Li_0.60[Mg_xMn_1-x]O₂(0.05 ≤ x ≤ 0.15)和三复合锂锰氧化物Li_0.60[Mg_xCo_yMn_1-x-y]O₂(x=0.05，0.05 ≤      

La-Ce对PbTiO3陶瓷气相扩渗生成La2Ti6O15CeTi21O38的陶瓷材料及其电性能

报道了采用气相法对PbTiO₃陶瓷扩渗La-Ce混合稀土元素的研究. 在气相扩渗过程中, La, Ce与PbTiO₃陶瓷组元发生了复杂反应,生成了稀土化合物La₂Ti₆O₁₅和CeTi₂₁O₃₈, 制备出未见报道的La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料, 经测试其导电性能发生了十分显著的变化. La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料的室温电阻率从2.0 ×10¹⁰ W·m下降为0.248 W·m,而且随着温度的变化, 晶粒电阻呈现明显的PTCR效应,而晶界电阻随着温度的升高,呈急剧连续降低状态,总电阻的变化规律与晶界电阻的变化相一致, 试样总电阻的PTCR效应已不存在, 近趋导体. 经XPS测试分析, 进一步证实了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料中铅、钛等元素均有变价, 因而导致了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料电阻率的降低, 测试结果还首次给出了La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料中各元素结合能位置的峰值. TG-DTA热分析表明La₂Ti₆O₁₅-CeTi₂₁O₃₈-PbTiO₃陶瓷材料具有较好的高温热稳定性.     

o-ZrW1.6Mo0.4O8·H2O正交相的合成与表征

The precursor ZrW_1.6Mo_0.4O₇(OH)₂(H₂O)₂ was characterized by IR and XRD methods. δ′-ZrW_1.6Mo_0.4O₈ was prepared by careful controlling the annealing conditions from the precursor and was determined to have the formula as o-ZrW_1.6Mo_0.4O₈·H₂O by TG-DSC, IR, and XRD methods. The relation between o-ZrW_1.6Mo_0.4O₈·H₂O and o-ZrW_1.6Mo_0.4O₈ was discussed through variable temperature XRD patterns. Further more, the mechanism of the precursor dehydration was suggested.     

298.15 K Li2B4O7-MgCl2-H2O体系热力学性质的电动势法测定及离子相互作用模型的研究

测定了298.15 K下, 无液接电池Li-ISE│Li₂B₄O₇ (m_A)(aq.), MgCl₂(m_B)(aq.)│AgCl/Ag的电动势, 利用测定结果计算了Li₂B₄O₇-MgCl₂-H₂O体系离子强度在0.05～3 mol•kg^－1范围内, 不同MgCl₂离子强度分数的溶液中LiCl的平均活度系数, 并给出了其随离子强度I, B₄O₇^2－和Mg^2＋浓度的变化规律. 结合以往关于该体系和Li₂B₄O₇-LiCl-H₂O, Li₂B₄O₇-H₂O体系的等压研究结果, 用迭代和多元线性回归方法对Li^＋-Mg^2＋-Cl^－-B₄O₇^2－-H₂O体系的离子相互作用模型进行了研究. 具体方法为考虑了该体系在不同的总硼浓度范围H₃BO₃, B(OH)₄^－, B₃O₃(OH)₄^－和B₄O₅(OH)₄^2－四种含硼化合物的存在以及各硼化合物间的化学平衡, 以修正了的Pitzer渗透系数方程和活度系数方程为基础, 对该体系的等压法和电动势法研究结果进行最小二乘拟合, 拟合的标准偏差为0.0167, 用该模型计算的该体系的渗透系数、活度系数与实验值基本一致.     

Bi2WO6量子点(QDs)修饰Bi2MoO6-xF2x异质结的构筑及其催化活性增强机理

采用简单沉积-沉淀法合成了Bi₂WO₆@Bi₂MoO_6-xF_2x（BWO/BMO6-xF2x）异质结,借助XRD、XPS、TEM、SEM、EDS、UV-Vis-DRS、PC和EIS等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征,并以模型污染物罗丹明B（RhB）的光催化降解作为探针反应来评价Bi₂WO₆@Bi₂MoO_6-xF_2x异质结的光催化活性增强机制。形貌分析表明,所得Bi₂MoO₆微球由大量厚度为20~50 nm的纳米片组成;FE-SEM和HR-TEM分析表明,尺寸约为10 nm的Bi₂WO₆量子点均匀沉积在Bi₂MoO_6-xF_2x微球表面,形成新颖的Bi₂WO₆@Bi₂MoO_6-xF_2x异质结;与纯Bi₂MoO₆或者Bi₂WO₆相比,1∶1Bi₂WO₆@Bi₂MoO_6-xF_2x异质结表现出更好的光催化活性和光电流性质,其对RhB光催化降解的表观速率常数分别为纯BMO和BWO的6.4和11.6倍。PC和EIS图谱分析表明,Bi₂WO₆量子点表面沉积显著提高Bi₂MoO_6-xF_2x光生电子/空穴的分离效率和迁移速率;活性物种捕获实验证明了·O₂^-和h⁺是主要的活性物种。根据实验结果,探讨了F^-掺杂和Bi₂WO₆量子点之间的协同效应对Bi₂MoO₆的光催化活性的影响机制。     

由大环配体[As4W40O140]28-与NiII形成的新型超大杂多化合物

在pH = 4.0的水溶液中, NiCl₂·6H₂O, NH₄Cl与Na₂₇[NaAs₄W₄₀O₁₄₀]·60H₂O反应, 得到了新的杂多砷钨酸盐(NH₄)₂₀[Na₂(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·61H₂O单晶, 用X射线单晶衍射法及元素分析确定了其结构, 晶体属三斜晶系, P¹空间群; 其晶胞参数为: a = 1.33135(18), b = 1.9722(3), c = 3.6430(5) nm, α = 78.010(2)°, β = 82.145(2)°, γ = 74.385(2)°, V = 8.978(2) nm3, Z = 2, R1 = 0.0512, wR2 = 0.0684 (I > 2σ). 在聚阴离子[Na₂(H₂O)₂Ni(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]^20-中, 2个Ni²⁺和2个Na⁺分占大环配体[As₄W₄₀O₁₄₀]^28-内的4个S2空位, 每个S2位提供4个O_d向金属离子配位, 2个Ni²⁺的配位数为6, 两个Na⁺的配位数分别为5和6, 另一个Ni²⁺处于环外, 与[As₄W₄₀O₁₄₀]^28-的一个端基氧(O_d)桥连成键, 其配位数为6.     

骨组织工程支架材料研究进展*

骨在组织工程中得到了非常广泛、深入的研究.支架材料与许多可降解材料一起也在进行探索性研究.用于骨组织工程的生物材料可以是三维多孔的刚硬材料,也可以是可注射材料.本文从聚合物角度综述了骨组织工程对支架材料的基本要求,用于骨组织工程的可降解生物材料、支架材料的设计和制备技术以及支架材料的表面修饰等方面的研究进展.     

Personalized hydrogels for individual health care: preparation,features, and applications in tissue engineering

Biomaterials-based tissue engineering scaffolds play an essential role as an independent therapy or with the combination of cellular or biological active constituents in tissue regeneration applications. However, synthetic grafts, xenografts, and allografts are recognized as foreign materials in human body, resulting in suboptimal clinical outcomes. Recently, autologous materials from a patient's body have drawn great attention in clinical treatment and tissue engineering. Moreover, the autologous scaffolds equipped with the advantages of tissue-like hydrogels have great potential to become a highly versatile tool as personalized hydrogels (PHs) for applications in 3D cell culture and tissue engineering. PHs may feature excellent biocompatibility, tailorable mechanical properties, regenerative capability, non-rejection of grafts/transplants on immunological responses, and customizable properties which could be suitable to meet the personal and clinical care. Here, we present a scoping review of recent progress of PHs with a focus on detailed preparation methods, material properties, and tissue engineering applications along with their challenges and opportunities. It is expected that PHs will circumvent the limitations of current tissue engineering therapies and will be used as next-generation scaffolds for tissue engineering and translational research.     

Applications of Gelatin Methacryloyl (GelMA) Hydrogels in Microfluidic Technique-Assisted Tissue Engineering

In recent years, the microfluidic technique has been widely used in the field of tissue engineering. Possessing the advantages of large-scale integration and flexible manipulation, microfluidic devices may serve as the production line of building blocks and the microenvironment simulator in tissue engineering. Additionally, in microfluidic technique-assisted tissue engineering, various biomaterials are desired to fabricate the tissue mimicking or repairing structures (i.e., particles, fibers, and scaffolds). Among the materials, gelatin methacrylate (GelMA)-based hydrogels have shown great potential due to their biocompatibility and mechanical tenability. In this work, applications of GelMA hydrogels in microfluidic technique-assisted tissue engineering are reviewed mainly from two viewpoints: Serving as raw materials for microfluidic fabrication of building blocks in tissue engineering and the simulation units in microfluidic chip-based microenvironment-mimicking devices. In addition, challenges and outlooks of the exploration of GelMA hydrogels in tissue engineering applications are proposed.     

Medical applications of biopolyesters polyhydroxyalkanoates

Microbial polyhydroxyalkanoates(PHAs) are a family of biopolyesters produced by many wild type and engineered bacteria.PHAs have diverse structures accompanied by flexible thermal and mechanical properties.Combined with their in vitro biodegradation,cell and tissue compatibility,PHAs have been studied for medical applications,especially medical implants applications,including heart valve tissue engineering,vascular tissue engineering,bone tissue engineering,cartilage tissue engineering,nerve conduit tissue engineering as well as esophagus tissue engineering.Most studies have been conducted in the authors’ lab in the past 20+ years.Recently,mechanism on PHA promoted tissue regeneration was revealed to relate to cell responses to PHA biodegradation products and cell-material interactions mediated by microRNA.Very importantly,PHA implants were found not to cause carcinogenesis during long-term implantation.Thus,PHAs should have a bright future in biomedical areas.     

Silk Fibroin Combined with Electrospinning as a Promising Strategy for Tissue Regeneration

The development of tissue engineering scaffolds is of great significance for the repair and regeneration of damaged tissues and organs. Silk fibroin (SF) is a natural protein polymer with good biocompatibility, biodegradability, excellent physical and mechanical properties and processability, making it an ideal universal tissue engineering scaffold material. Nanofibers prepared by electrospinning have attracted extensive attention in the field of tissue engineering due to their excellent mechanical properties, high specific surface area, and similar morphology as to extracellular matrix (ECM). The combination of silk fibroin and electrospinning is a promising strategy for the preparation of tissue engineering scaffolds. In this review, the research progress of electrospun silk fibroin nanofibers in the regeneration of skin, vascular, bone, neural, tendons, cardiac, periodontal, ocular and other tissues is discussed in detail.     

可降解聚氨酯型组织工程多孔支架材料的制备

本文在可降解型聚氨酯分子设计,聚氨酯型组织工程支架制备方法,可降解聚氨酯多孔支架的生物学性能及可降解聚氨酯多孔支架在组织工程中的应用等几个方面对可降解聚氨酯型组织工程支架的最新研究进展作了综述。重点讨论了静电纺丝、冷冻干燥、相分离等几种聚氨酯多孔支架制备方法以及聚氨酯型组织工程支架的生物降解性质、生长因子嵌入、生物力学性能、生物相容性等生物学性能。目前的研究表明通过聚氨酯分子设计与各种支架制备方法结合可制得满足各种生物学性能的支架材料且这类材料已被证实在血管、软骨、硬质骨等各类组织工程中有重要的应用价值。但如何进一步提高聚氨酯支架材料的力学强度以使其能更好地与硬组织的力学性能相匹配以及如何降低或消除聚氨酯对人体的毒性仍是需要进一步研究的问题。     

Progress in Articular Cartilage Tissue Engineering: A Review on Therapeutic Cells and Macromolecular Scaffolds

Repair and regeneration of articular cartilage lesions have always been a major challenge in the medical field due to its peculiar structure (e.g., sparsely distributed chondrocytes, no blood supply, no nerves). Articular cartilage tissue engineering is considered as one promising strategy to achieve reconstruction of cartilage. With this perspective, the articular cartilage tissue engineering has been widely studied. Here, the recent progress of articular cartilage tissue engineering is reviewed. The ad hoc therapeutic cells and growth factors for cartilage regeneration are summarized and discussed. Various types of bio/macromolecular scaffolds together with their pros and cons are also reviewed and elaborated.     

Photo-crosslinkable hydrogel and its biological applications

In the past few years,photo-crosslinkable hydrogels have drawn a great attention in tissue engineering applications due to their high biocompatibility and extracellular matrix(ECM)-like structure.They can be easily biofabricated through exposure of a photosensitive system composed of photo-crosslinkable hydrogels,photo-initiators and other compounds such as cells and therapeutic molecules,to ultraviolet or visible light.With the development of biofabrication methods,ma ny resea rchers studied the biological applications of photo-crosslinkable hydrogels in tissue engineering,such as vascular,wound dressing and bone engineering.This review highlights the biomaterials for photo-crosslinkable hydrogels,bio fabrication techniques and their biological applications in tissue engineering.Meanwhile,the challenges and prospects of photo-crosslinkable hydrogels are discussed as well.     

The use of poly(L-lactide-co-caprolactone) as a scaffold for adipose stem cells in bone tissue engineering: application in a spinal fusion model

Since the early 1990s, tissue engineering has been heralded as a strategy that may solve problems associated with bone grafting procedures. The original concept of growing bone in the laboratory, however, has proven illusive due to biological, logistic, and regulatory problems. Fat-derived stem cells and synthetic polymers open new, more practicable routes for bone tissue engineering. In this paper, we highlight the potential of poly(L-lactide-co-caprolactone) (PLCL) to serve as a radiolucent scaffold in bone tissue engineering. It appears that PLCL quickly and preferentially binds adipose stem cells (ASCs), which proliferate rapidly and eventually differentiate into the osteogenic phenotype. An in vivo spinal fusion study in a goat model provides a preclinical proof-of-concept for a one-step surgical procedure with ASCs in bone tissue engineering.