基于低共熔溶剂的整体式萃取头的制备及其对湖水中3种多环芳烃的固相微萃取（英文）

采用氯化胆碱-乙二醇低共熔溶剂(DES)作致孔剂,制备了聚(甲基丙烯酸丁酯-乙二醇二甲基丙烯酸酯)[poly(BMA-EDMA)]固相微萃取头,并与超高效液相色谱法(UPLC)结合测定了湖水中的3种多环芳烃(PAHs)。实验与不使用DES致孔剂的固相微萃取头和商品化聚二甲硅氧烷(PDMS)萃取头进行比较,含DES的poly(BMA-EDMA)固相微萃取头的富集效果最好。系统考察了萃取条件(萃取时间、萃取溶剂、解吸时间、解吸溶剂及离子强度)对水样中多环芳烃萃取效率的影响。在最优的实验条件下,3种多环芳烃类化合物(萘、联苯、菲)的线性范围为0.1~6.0 mg/L(r≥0.990 3),检出限为2.1~4.9μg/L,回收率为86.4%~111.3%,相对标准偏差(RSD,n=6)为11.2%~15.1%。该法操作简便,稳定性好,成本低,适用于实际环境水样中多环芳烃类化合物的测定。     

固相微萃取-高效液相色谱联用分析环境水样中的痕量多环芳烃

建立了固相微萃取(SPME)-高效液相色谱(HPLC)联用同时测定环境水样中8种多环芳烃的分析方法。优化了萃取时间、萃取温度、解吸时间、解吸溶液、解吸模式等条件。该法对8种多环芳烃的检出限为0.002-0.180 μg/L,相对标准偏差(RSD, n=6)为4.4%-12.2%。用该法分析江水中的痕量多环芳烃,除苯并［b］荧蒽外,其他7种多环芳烃的回收率为91.1%-115.8%,RSD(n=3)为3.6%-18.8%。方法快速、灵敏、简单,适用于快速分析环境水样中的痕量多环芳烃。     

基于整体柱的固相萃取-高效液相色谱法测定尿液中4种羟基多环芳烃

建立了基于聚合物整体柱的固相萃取-高效液相色谱测定尿液中4种羟基多环芳烃（OH-PAHs）的分析方法。在注射器管中合成聚（甲基丙烯酸丁酯-乙二醇二甲基丙烯酸酯）整体柱（poly （BMA-co-EDMA））,并将其用于尿液中4种羟基多环芳烃的前处理,同时考察了上样浓度、淋洗液、洗脱液和洗脱体积对萃取效率的影响。结合高效液相色谱-荧光分析,4种羟基多环芳烃在各自的范围内线性关系良好（r≥0.9991）;方法的检出限和定量限分别为0.06~0.09 ng/mL和0.20~0.30 ng/mL;日内（n=5）和日间（n=3）精密度分别为1.4%~5.3%和2.6%~7.3%。对焦炉工人尿液样品进行加标（3 ng/mL）回收试验,回收率为78.2%~117.0%。该固相萃取柱能够有效萃取和净化尿液中4种羟基多环芳烃,并且可以重复使用。该法简单、准确,可应用于尿液中羟基多环芳烃的分析。     

竹炭固相萃取/气相色谱-质谱联用对环境水样中16种多环芳烃的测定

以竹炭为固相萃取吸附材料,考察了其对环境水样中16种多环芳烃的吸附富集能力,采用DB-35MS弹性石英毛细管色谱柱对16种多环芳烃进行分离,气相色谱-质谱联用法对多环芳烃进行定性及定量分析.结果表明,1 000 mg竹炭作为固相萃取吸附剂,10 mL二氯甲烷作为洗脱剂,上样速率5 mL/min,水样中甲醇体积分数为15%的条件下,16种多环芳烃有较好的回收率,竹炭固相萃取柱的穿透体积大于500 mL,通过实验比较竹炭的萃取回收率优于商品化的C18固相萃取柱.16种多环芳烃的质量浓度在10 ～500 ng/L范围内与峰面积的线性关系良好(苯并(k)荧蒽,苯并(a)芘,二苯并(a,h)蒽,苯并(g,h,i)苝为25 ～500 ng/L),相关系数为0.983 6 ～0.998 4.方法的检出限为0.6 ～8.0 ng/L,实际水样的加标回收率为67% ～113%,相对标准偏差为2.1% ～11.3%.通过对白沙河河水的分析表明,该方法能够满足实际水样的测定,竹炭可以作为固相萃取材料应用于水中16种多环芳烃的分析测定.     

石墨烯层层键合固相微萃取纤维的制备及对多环芳烃的检测

通过3-巯基丙基三甲氧基硅烷处理银层包裹的不锈钢纤维,得到Si-OH功能化的纤维,氧化石墨烯被层层键合到Si-OH功能化的纤维上,还原氧化石墨烯得到石墨烯层层键合的固相微萃取纤维。该方法制备的新型石墨烯层层键合的固相微萃取纤维具有制备简单,机械性能强,萃取涂层牢固,萃取能力强等优势。建立具有较宽线性范围(5~200μg/L)、较低检测限(0.007~0.09μg/L)的固相微萃取-气相色谱分析方法,用该方法测定河水和雨水中多环芳烃的含量。所制备的新型纤维重现性好、稳定性高、萃取能力强,可实现对多环芳烃的痕量检测。     

加速溶剂萃取-磁固相萃取净化-气相色谱-质谱法测定土壤中16种多环芳烃和23种有机氯残留

建立了加速溶剂萃取（ASE）、磁固相萃取净化（MSPE）、气相色谱-质谱（GC-MS）测定土壤中多环芳烃和有机氯残留的方法。ASE萃取溶剂为丙酮-正己烷（1：1，v/v），萃取温度为100℃，萃取压力为11.032 MPa，加热时间为5 min，静态萃取时间为5 min，循环萃取3次，冲洗体积为60%萃取池体积，氮气吹扫100 s。然后采用室温制备法自制ZIF-8/nZVI磁性材料用于净化萃取液，将净化液浓缩定容后进行GC-MS测定。多环芳烃和有机氯的线性范围为5~200 μg/kg，线性相关系数（r²）均大于0.99；目标物的检出限（LOD，S/N=3）为0.04~1.21 μg/kg。所建方法成功用于土壤样品中16种多环芳烃和23种有机氯的测定，在3个加标水平下得到的加标回收率为63.9%~112.1%，相对标准偏差（RSD）为0.4%~26.2%。研究结果表明，该方法具有灵敏度高、重现性好、回收率高等特点，适用于土壤中多环芳烃和有机氯残留的检测。     

固相萃取搅拌棒萃取-气相色谱分析海水中的多环芳烃

利用固相萃取搅拌棒（SBSE）萃取海水中的多环芳烃，然后用热解吸脱附-气相色谱分析。研究了萃取时间、添加NaCl浓度对萃取效率的影响。实验结果表明，SBSE方法对16种多环芳烃的萃取回收率分别在33．5％～122．4％之间；对标准样品的检出限为2．74-13．5ng／L；方法RSD为3．8％～13．1％。用此方法测定了大连海岸海水中的多环芳烃含量。     

ACF-SPME检测海洋水体中的多环芳烃

使用新型活性炭纤维(ACF)作为固相微萃取(SPME)技术的萃取纤维,检测了海水中的多环芳烃。得到ACF-SPME萃取多环芳烃的最优条件为:在搅拌条件下,盐浓度10%,pH3,温度60℃水浴中直接萃取40min。并确定16种多环芳烃的RSD(n=5)为1.8%～10%、线性范围为0.1～500μg/L、检出限为0.1～100μg/L。对东海近海海水进行了分析,结果表明海水中PAHs浓度在检测限以下,同时进行加标回收实验,得到16种多环芳烃的回收率在80%～128%。     

气相色谱-串联质谱法测定土壤中多环芳烃和多氯联苯

研究土壤中持久性有机污染物的含量可以为区域环境治理和来源解析提供基础数据。本文通过固相萃取结合气相色谱-串联质谱法建立了16种多环芳烃和15种多氯联苯的检测方法,并优化了固相萃取净化方法、色谱条件以及质谱碰撞能量。结果表明16种多环芳烃和15种多氯联苯的标准曲线线性关系良好,方法线性相关系数r~20.999,方法的检出限为0.1~2.5μg·kg~(-1),16种多环芳烃的平均加标回收率范围为62.5%~113.5%,相对标准偏差在2.3%~8.2%之间,15种多氯联苯的平均加标回收率范围为62.6%~91.4%,相对标准偏差在5.2%~7.8%之间。方法的准确度和精密度较高,通过对实际样品的测定,说明该方法具有较低的检出限及较强的抗干扰能力,能满足土壤中多环芳烃和多氯联苯的检测要求。     

固相萃取-气相色谱-质谱法测定地下水中多环芳烃

提出了固相萃取-气相色谱-质谱法测定地下水中16种多环芳烃的方法。样品经ENVIC18固相萃取柱富集,依次用丙酮5 mL和二氯甲烷10 mL将16种多环芳烃从固相萃取柱上洗脱,用K-D浓缩器浓缩后,供气相色谱-质谱仪测定。纯水或自来水经固相萃取处理后,再用于配制标准溶液并绘制标准曲线。16种多环芳烃的检出限(3S/N)均小于2.0 ng.L-1。用该法分析地下水样品,所得结果的相对标准偏差(n=7)小于14.0%,加标回收率在84.3%~112.3%之间。     

New approach based on solid-phase microextraction to estimate polydimethylsiloxane fibre coating-water distribution coefficients for brominated flame retardants

A depletion solid-phase microextraction (SPME) method based on multiple SPME extraction was applied to estimate fibre coating-water distribution constants (Kfs) of brominated flame retardants. Several polybrominated diphenyl ethers (PBDEs) including compounds present in the commercial mixture "Pentamix", and two polybrominated biphenyls (PBBs) were considered as target analytes. One hundred-micrometer poly(dimethylsiloxane) (PDMS) coating fibre was selected to estimate partition coefficients. SPME kinetics studies at 25 and 100 degrees C were performed. Kfs values obtained at both temperatures for brominated flame retardants were compared with the corresponding octanol-water partition coefficients (Kow) values found in literature. A linear log-log relationship between Kow with Kfs was found. To the best of our knowledge, this is the first study where brominated flame retardants Kfs values are estimated.     

Determination of polydimethylsiloxane-seawater distribution coefficients for polychlorinated biphenyls and chlorinated pesticides by solid-phase microextraction and gas chromatography-mass spectrometry

Applications of solid-phase microextraction (SPME) in the measurement of very hydrophobic organic compounds (VHOCs) are limited, partly due to the difficulty of calibrating SPME fibers for VHOCs. This study used a static SPME strategy with a large sample volume (1.6 L) and a five-point calibration procedure to determine the distribution coefficients for a large suite of polychlorinated biphenyls (PCBs) and chlorinated pesticides between a polydimethylsiloxane (PDMS) phase (100 microm thickness) coated on a glass fiber and seawater. An extraction time of 12 days was deemed adequate for equilibrium calibration from kinetic experiments. Two groups of randomly selected fibers divided into three batches (up to nine fibers in each batch) were processed separately with two gas chromatography-mass spectrometry (GC-MS) systems. Matrix effects arising from losses of the analytes to glass container walls and stirring bars were corrected. Relative standard deviations within the same batch were generally smaller than those for the entire group. Furthermore, KfVf (Kf and Vf are the distribution coefficient of an analyte between the polymer-coated fiber and aqueous phase and the fiber volume, respectively) values determined with two GC-MS systems were statistically different. These results indicate the calibrated KfVf values were less affected by the random selection of SPME fibers than by other experimental conditions, and therefore average KfVf values may be used for the same type of commercially available SPME fibers. The relative accuracy of our calibration method was similar to that of a previous study [P. Mayer. W.H.J. Vaes, J.L.M. Hermens, Anal. Chem. 72 (2000) 459] employing different coating thickness and calibration procedure. The present study also obtained a bell-shaped relationship between log Kf and log Kow (octanol-water partition coefficient) for PCB congeners with the maximum log Kf corresponding to log Kow approximately 6.5. This bell-shaped relationship was attributed mainly to steric effects arising from the interplay between the PDMS thickness and molecular sizes of the target analytes.     

氯代苯、醇、酯气相色谱保留指数与其正辛醇-水分配系数相关性

报道了氯代苯、醇、酯类化合物气相色谱保留指数与其正辛醇－水分配系数的相关性，研究了固定相极性对相关性影响，得出弱极性柱上测得的化合物保留指数能更准确地预测其分配系数，从而为极性化合物氯代苯、醇、酯分配系数的测定和预测提供了一种简便易行的新方法。     

Retention behavior of o-phthalic, 3-nitrophthalic, and 4-nitrophthalic acids in ion-suppression reversed-phase high performance liquid chromatography using acids instead of buffers as ion-suppressors

In reversed-phase high performance liquid chromatography, the logarithm of the retention factor, log k, is usually correlated with the logarithm of the octanol-water partition coefficient, log Kow. The k and Kow of an ionizable analyte are greatly influenced by the mobile phase pH. In this paper, log kw of diprotic o-phthalic, 3-nitrophthalic, and 4-nitrophthalic acids, are obtained by extrapolation to pure aqueous fraction of mobile phase in ion-suppression reversed-phase high performance liquid chromatography with acetic acid and perchloric acid as the ion-suppressors. The Kow values of the three analytes are calibrated according to the apparent octanol-water partition coefficient, Kow, under different pH conditions, and the log K"ow values show a much better correlation with log kw than do log Kow. The influences of two ion-suppressors, acetic and perchloric acids, on the retention behavior of these diprotic acids at different pH are contrasted. An abnormal trend is found in the k vs. pHw plot of the acetic acid system when the methanol content is low. A possible reason is that acetic acid is an even stronger organic modifier than methanol, besides being an ion-suppressor. The results make the selection of mobile phase for the separation of acidic compounds by ion-suppression reversed-phase high performance liquid chromatography direct, accurate, and practical.     

A combined QSAR and partial order ranking approach to risk assessment

QSAR generated data appear as an attractive alternative to experimental data as foreseen in the proposed new chemicals legislation REACH. A preliminary risk assessment for the aquatic environment can be based on few factors, i.e. the octanol-water partition coefficient (Kow), the vapour pressure (VP) and the potential biodegradability of the compound in combination with the predicted no-effect concentration (PNEC) and the actual tonnage in which the substance is produced. Application of partial order ranking, allowing simultaneous inclusion of several parameters leads to a mutual prioritisation of the investigated substances, the prioritisation possibly being further analysed through the concept of linear extensions and average ranks. The ranking uses endpoint values (log Kow and log VP) derived from strictly linear 'noise-deficient' QSAR models as input parameters. Biodegradation estimates were adopted from the BioWin module of the EPI Suite. The population growth impairment of Tetrahymena pyriformis was used as a surrogate for fish lethality.     

Some observations regarding different retention properties of HPLC stationary phases

Summary The retention of 32 monocyclic aromatic compounds and 14 polynuclear aromatic hydrocarbons (PAHs) has been studied on four different bonded phases in each of two mobile phases. An additional data set of 21 monocyclic aromatics judiciously chosen for their well-established solvatochromic parameters, 12 PAHs and 12 polychlorinated biphenyls (containing up to 10 chlorines), were studied on a single column. The results indicate that despite the accuracy of the solvatochromic linear solvation energy method for predicting and correlating the octanol/water partition coefficients and water solubilities of these environmentally important materials, the methodology is limited to only certain types of bonded phases. As a corollary to this observation, we caution others that the common practice of estimating log K_ow (K_ow=octanol-water partition coefficient) based on measurement of the reversed-phase capacity factors should be limited to specific types of columns. Part 5 of Solute-Solvent Interactions in Chemistry and Biology.     

Enhanced extraction capacity and chemical noise reduction in solid-phase microextraction

Solid-phase microextraction fibres with different lengths, coatings (polydimethylsiloxane, polyacrylate, Carbowax/divinylbenzene), film thicknesses, and mounting techniques were examined in combination with GC-MS with regard to their enhanced extraction capacities and fibre 'bleeding'. A series of phenols and halogenated aromatics with diverse physicochemical properties were investigated to characterize the effects of the enhanced extraction capacities of solid-phase microextraction fibres. Fibre extension was found to be effective for the microextraction of compounds with high log Kow values, whereas increasing both coating thickness and fibre length is most effective for the microextraction of more polar compounds such as phenols. Almost no bisphenol A was released when custom-made polydimethylsiloxane fibres were used, finally eliminating a drawback of endocrine disrupter analysis by solid-phase microextraction.     

Analysis of anticancer platinum(II)-complexes by microemulsion electrokinetic chromatography: separation of diastereomers and estimation of octanol-water partition coefficients

Microemulsion electrokinetic chromatography (MEEKC) was applied for the separation and lipophilicity estimation of oxaliplatin and eight novel anticancer oxaliplatin derivatives. Solubility and permeability have to be balanced in modern drug development, and the octanol-water partition coefficient (log P) still represents one of the most useful quantifiable parameters providing a reasonable estimation of a drug's lipophilicity. Therefore, the capacity factors from MEEKC were correlated to log P values derived by the traditional shake flask method. The MEEKC method was accomplished using a microemulsion of heptane/sodium dodecyl sulfate (SDS)/butanol in phosphate buffer at pH 7.4 and 37 degrees C with all analytes being in a neutral state during the run. This experimental setup allowed a baseline separation of all platinum complexes within 11 min. Remarkably, beside the very good resolution and precision of the measurements, separation of diastereomers of the complexes and quantification of the diastereomeric ratios could be achieved. Correlating the capacity factors with the corresponding log P values resulted in a linear dependency with a correlation factor of r = 0.9935. Consequently, the applied MEEKC method was found to be a highly valuable technique not only for the separation of platinum complexes but as well for the estimation of the octanol-water partition coefficient with many advantages in comparison to other methods.