手性药物异丙嗪对映体的毛细管电泳-方波安培法检测

以未涂层融硅石英毛细管 (5 0cm× 75 μm)为分离柱 ,5mmol/LNaOH +10mmol/LCitricacid +3mmol/LH3 BO3 +10mmol/L β 环糊精 (β CD) (pH =3.5 )为电泳介质 ,分离电压 12kV ,采用毛细管电泳 方波安培法对手性药物异丙嗪对映体实现了分离检测。对影响手性对映体分离检测效果的缓冲溶液的种类、浓度和 pH等诸因素进行了研究。结果表明 :硼酸与手性选择剂 β CD分子中糖羟基发生键合配位作用 ,增加了β CD 的负电性的特性 ,在对映体拆分中起到关键性的作用。     

手性药物心得安对映体的毛细管电泳/电化学分离检测研究

报道了采用毛细管电泳 -方波安培检测法对手性药物对映体———外消旋心得安进行了分离检测研究。以5mmol/LNaOH -8mmol/L柠檬酸 -10mmol/Lβ_CD(pH4.5)为电泳介质 ,未涂层熔融石英毛细管(75μm×45cm)为分离通道 ,分离电压 +12.5kV ,实现了心得安对映体的基线分离。方法的线性范围为2.0×10 -6～1.0×10 -4mol/L ,检出限为5.0×10 -7mol/L。     

葡萄糖基-β-环糊精作为手性选择剂对苯磺酸氨氯地平的毛细管电泳手性拆分

以葡萄糖基-β-环糊精(Glu-β-CD)为手性选择剂,用毛细管区带电泳法对手性药物苯磺酸氨氯地平进行了拆分研究.考察了缓冲液的pH值、缓冲液浓度、缓冲液体系组成、Glu-β-CD的浓度及电压等对分离的影响,并对3批市售左旋苯磺酸氨氯地平片(施慧达)进行光学纯度检查.结果表明,在背景电解质为含20 mmol/L Glu-β-CD的200 mmol/L乙酸-三乙醇胺(HAc-TEA)(pH 4.0)体系,电压25 kV,温度20 ℃,检测波长214 nm的条件下,苯磺酸氨氯地平可以得到良好分离,分离度为4.0.     

β-环糊精用于毛细管电泳拆分佐匹克隆对映体的研究

以β-环糊精(β-CD)为手性添加剂,用毛细管区带电泳法对手性药物佐匹克隆进行了拆分研究.考察了β-环糊精浓度、背景电解质组成、浓度及pH值、分离电压、温度等对对映体分离的影响.结果表明,以pH 2.5的100 mmol/L三羟甲基氨基甲烷-磷酸溶液(含15 mmol/L β-环糊精)为运行缓冲液,分离电压28 kV,毛细管温度16 ℃,检测波长303 nm,佐匹克隆对映体达到最佳分离,分离度为2.7,对映体迁移时间分别为8.4、8.9 min.该方法简单、快速、经济,可适用于佐匹克隆对映体的手性分离.     

托吡卡胺对映体的毛细管电泳-方波安培分离检测

采用毛细管电泳-方波安培检测法,在熔融石英毛细管(75 μm i.d.×50 cm)中,以7 mmol/L 三羟甲基氨基甲烷(Tris)-10 mmol/L柠檬酸-2 mmol/L硼酸-15mmol/L β-环糊精 （β-CD） (pH 3.0)为电泳介质,采用重力进样,高度差为20 cm,进样时间为10 s,在分离电压为15 kV,方波平衡电位+0.8 V的条件下,实现了托吡卡胺对映体的分离检测。线性范围为5~750 μmol/L,检出限为2 μmol/L。对影响分离度的因素β-CD浓度、硼酸浓度及p     

二甲基-β-环糊精作为手性选择剂对尼索地平对映体的毛细管电泳拆分研究

以二甲基-β-环糊精(DM-β-CD)为手性添加剂,用毛细管电泳法对消旋体药物尼索地平进行拆分研究。考察了二甲基-β-环糊精浓度、背景电解质种类、缓冲溶液pH值、十二烷基硫酸钠(SDS)浓度、分离电压、温度对对映体分离的影响。结果表明,以pH 8.0的30 mmol/L磷酸二氢钠-磷酸氢二钠溶液(含38mmol/L二甲基-β-环糊精,30 mmol/L SDS)为缓冲液,分离电压15 kV,毛细管温度18℃,检测波长254 nm时,尼索地平对映体达到最佳分离,分离度为1.95,对映体迁移时间分别为13.0、13.54 min。该方法简单、快速、经济,可用于尼索地平对映体的手性分离。     

α-萘基缩水甘油醚对映体的毛细管区带电泳手性拆分

建立了毛细管区带电泳手性拆分α-萘基缩水甘油醚对映体的方法.考察了不同手性拆分试剂对手性选择性的影响,实验结果表明,20 mmol/L H3PO4-三乙醇胺(pH 2.5)、2%(w/V)HS-β-CD、毛细管温度20 ℃、运行电压-18 kV为最佳分离条件,在该分离条件下α-萘基缩水甘油醚对映体实现基线分离.方法简便、准确,可用于α-萘基缩水甘油醚的手性拆分和对映体过量值(ee,%)测定.     

联萘酚对映体的毛细管电泳/方波安培法分离检测

建立了毛细管电泳/方波安培法分离检测联萘酚对映体的新方法.对影响对映体分离度的影响因素,如手性选择剂β 环糊精浓度、氢氧化钠浓度、硼酸浓度、分离电压进行了探讨。在16mmol/L氢氧化钠+14mmol/Lβ 环糊精+4mmol/L硼酸的电泳运行液,方波平衡电位+0.90V和10kV的分离电压条件下,联萘酚对映体在10min内得到基线分离,检出限为1.0×10-6mol/L。     

高效毛细管电泳电导法拆分苯丙氨酸对映体

以未涂层融硅石英毛细管(50 cm×75μm)为分离柱,2 mmol/L NaAc 2 mmol/L HAc 0.5 mmol/LCu2 (pH 4.0)作为电泳运行液,分离电压15 kV,建立了苯丙氨酸对映体的高效毛细管电泳-电导分离检测的方法。对缓冲溶液的种类、浓度、分离电压、有机改性剂等因素对分离的影响进行了讨论,并对拆分机理进行了初步探讨。     

毛细管电泳法和高效液相色谱法拆分联萘二酚酸对映体

采用毛细管电泳法和高效液相色谱法直接拆分2,2′-二羟基-1,1′-联二萘-3,3′-二甲酸(HBNC)对映体.以四种不同的β-环糊精为手性添加剂,考察环糊精的种类与浓度、缓冲液pH值及浓度、分离电压、温度等因素对HBNC分离的影响.结果表明:采用10 mmol/L磺丁基醚-β-环糊精+20 mmol/L磷酸盐缓冲液(pH=7.0),20 kV分离电压,HBNC对映体在20 min内达到基线分离,分离度达到3.31.采用(S)-叔-亮氨酸基-(S)-1-(α-萘基)乙胺手性柱,正己烷-乙醇-三氟乙酸(97∶3∶0.2,V/V)流动相,HBNC对映体在40 min内也基本达到基线分离.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).