Thermal Behavior and Decomposition Kinetics of the Complexes of CuX2 （X=NO3, Br, CI and CIO4） with 3,3＇-Dimethyl-1 -（1 H-1,2,4-triazol-1-yl）-2-butanone

The thermal behaviors of the complexes of Cu(DMTZB)4X2 (DMTZB=3,3‘-dimethyl-1-(1H-1,2,4-triazol-1-yl)-2-butanone, X=NO3 or ClO4) and Cu(DMTZB)2 X2 (X=Br or Cl) in a nitrogen atmosphere were studied under the non-isothermal conditions by simultaneous TG-DTG-DSC, EDS and elemental analysis techniques. The resuits showed that their decomposition proceeded in three different ways mainly depending on the anions in the molecules. The heat effect associated with the decomposition step of DMTZB molecules was also different. The decomposition mechanisms and the kinetic parameters of DMTZB were determined and calculated by jointly using four methods, which showed that its pyrolysis was controlled by D3 mechanism but with different activation energies and pre-exponential factors for different complexes.     

Potentiometric, spectroscopic and thermal studies on the metal chelates of 1-(2-thiazolylazo)-2-naphthalenol

The synthesis and characterization of Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II), Pd(II) and UO2(II) chelates of 1-(2-thiazolylazo)-2-naphthalenol (TAN) were reported. The dissociation constants of the ligand and the stability constants of the metal complexes were calculated pH-metrically at 25 degrees C and 0.1 M ionic strength. The solid complexes were characterized by elemental and thermal analyses, molar conductance, IR, magnetic and diffuse reflectance spectra. The complexes were found to have the formulae [M(L)2] for M = Mn(II), Co(II), Ni(II), Zn(II) and Cd(II); [M(L)X].nH2O for M = Cu(II) (X = AcO, n = 3), Pd(II) (X = Cl, n = 0) and UO2(II) (X = NO3, n = 0), and [Fe(L)Cl2(H2O)].2H2O. The molar conductance data reveal that the chelates are non-electrolytes. IR spectra show that the ligand is coordinated to the metal ions in a terdentate manner with ONN donor sites of the naphthyl OH, azo N and thiazole N. An octahedral structure is proposed for Mn(II), Fe(III), Co(II), Ni(II), Zn(II), Cd(II) and UO2(II) complexes and a square planar structure for Cu(II) and Pd(II) complexes. The thermal behaviour of these chelates shows that water molecules (coordinated and hydrated) and anions are removed in two successive steps followed immediately by decomposition of the ligand molecule in the subsequent steps. The relative thermal stability of the chelates is evaluated. The final decomposition products are found to be the corresponding metal oxides. The thermodynamic activation parameters, such as E*, delta H*, delta S* and delta G* are calculated from the TG curves.     

Stereochemistry,structural and models of novel 5-(4'-derivatives phenyldiazo)-3-phenyl-2-thioxo-4-thiazolidinone complexes

Copper(II) and cadmium(II) complexes of 5-(4'-derivatives phenyldiazo)-3-phenyl-2-thioxo-4-thiazolidinone (HLn) were prepared, their compositions and physicochemical properties were characterized by elemental analysis, magnetic suseptibility measurements, and infrared, electronic spectra. The novel complexes have the stoichiometric formulae [Cu(HLn)(OAc)n(H2O)(X)] (OAc = acetate, X = H2O or acetate) and [Cd(L)(OAc)(H2O)], respectively. Elemental analysis and IR spectra denote, that two types of complexes with different octahedral and tetrahedral structure for Cu(II) and Cd(II) ions. I.R. spectra show that the ligand is monobasic/neutral bidentate forming thereby a six-membered chelating ring and concomitant formation of an intramolecular hydrogen bond. The stoichiometeries of these complexes were determined conductometrically and indicated the formation of 1:1 and 1:2 (metal:ligand) complexes.     

Thermochemical studies on copper(II) and nickel(II) complexes of the Schiff base derived from 2-(2-aminophenyl)benzimidazole and salicylaldehyde

Microcalorimetric measurements were made on copper(II) and nickel(II) complexes of the Schiff base (L) derived from 2-(2-aminophenyl)benzimidazole and salicylaldehyde. The complexes were of the general type MX₂L₂ with M = Cu or Ni, and X = Cl, Br, NO₃ or ClO₄. The enthalpies of decomposition of the solid complexes to solid products, MX₂ and L, were derived. Despite showing some variation depending on the anion, the average binding enthalpy of the ligand to nickel was 47.5 ± 7.3 kJ mol⁻¹, greater than that to copper, 16.8 ± 3.5 kJ mol⁻¹ by 30.7 ± 8.1 kJ mol⁻¹.     

{Ln(III)[mu(5)-kappa(2),kappa(1),kappa(1),kappa(1),kappa(1)-1,2-(CO2)(2)C6H4][isonicotine][H2O]}(2)Cu(I) x X (Ln = Eu, Sm, Nd; X = ClO4-, Cl-): a new pillared-layer approach to heterobimetallic 3d-4f 3d-network solids

A new series of heterometallic lanthanide(III)-copper(I) coordination polymers Ln2(bdc)2(ina)2(H2O)2Cu x X (Hina = isonicotinic acid; H2bdc = 1,2-benzenedicarboxylic acid; Ln = Eu (1), Sm (2), Nd (3), X = ClO4-; Ln = Nd (4), X = Cl-) have been hydrothermally synthesized in the presence/absence of HClO4. Both compounds are isostructural and contained two distinct units of 2D Ln-bdc layers and linear [Cu(ina)2]-. The linear [Cu(ina)2]- complexes act as pillars and further link the Ln-bdc layers resulting in four heterometallic metal-organic frameworks, which represent the first pillared-layer 3d-4f framework with two distinct types of channels along the b and c axes. The compounds can be specified by the Schl?fli symbol (47.63)(47.68) as a novel 3D (5,6)-connected net. Furthermore, the IR, TGA, PXRD, and UV-vis spectral and luminescent properties of 1-4 were also studied.     

Copper(I) coordination polymers [{Cu(mu-X)}2{RP(mu-NtBu)}2]n (R = OC6H4OMe-o; X = Cl, Br, and I) and their reversible conversion into mononuclear complexes [CuX{(RP(mu-NtBu)2}2]: synthesis and structural characterization

The reactions of cyclodiphosphazane cis-[tBuNP(OC6H4OMe-o)]2 (1) with 2 equiv of CuX in acetonitrile afforded one-dimensional Cu(I) coordination polymers [Cu2X2{tBuNP(OC6H4OMe-o)}2]n (2, X = Cl; 3, X = Br; 4, X = I). The crystal structures of 2 and 4 reveal a zigzag arrangement of [P(mu-N)(2)P] and [Cu(mu-X)(2)Cu] units in an alternating manner to form one-dimensional Cu(I) coordination polymers. The reaction between 1 and CuX in a 2:1 ratio afforded mononuclear tricoordinated copper(I) complexes of the type [CuX{(tBuNP(OC6H4OMe-o))2}2] (5, X = Cl; 6, X = Br; 7, X = I). The single-crystal structures were established for the mononuclear copper(I) complexes 5 and 6. When the reactant ratios are 1:1, the formation of a mixture of polymeric and mononuclear products was observed. The Cu(I) polymers (2-4) were converted into the mononuclear complexes (5-7) by reacting with 3 equiv of 1 in dimethyl sulfoxide. Similarly, the mononuclear complexes (5-7) were converted into the corresponding polymeric complexes (2-4) by reacting with 3 equiv of copper(I) halide under mild reaction conditions.     

Synthesis and structural investigation of mono- and polynuclear copper complexes of 4-ethyl-1-(pyridin-2-yl) thiosemicarbazide

The reaction between 2-hydrazinopyridine and ethylisothiocyanate produced 4-ethyl-1-(pyridin-2-yl) thiosemicarbazide (HEPTS). Its reaction with copper fluoride, chloride, bromide, acetate, nitrate, perchlorate, sulfate, carbonate, hydroxide and copper metal produced 15 Cu(II) complexes. The copper metal is easily oxidized in aqueous-ethanol solution of HEPTS giving [Cu(2)(EPTS)(H(2)O)(3)(OH)(3)]EtOH. Different complexes for the same anion were synthesized by controlling the heating time. Characterization by elemental, thermal, magnetic and spectral (electronic, IR, mass and ESR) studies showed the formation of mono-, di-, tri- and tetra nuclear complexes. The room temperature solid state ESR spectra of the complexes show an axial spectrum with d(x)(2)-y(2) ground state, suggesting distorted tetragonal geometry around Cu(II) center. The kinetic and thermodynamic parameters for the different decomposition steps in the complexes were calculated. HEPTS and its Cu(II) complexes showed high activity against gram negative bacteria; [Cu(3)(EPTS)(2)(EtOH)(2)Br(4)] has more activity.     

Thermal and kinetic studies on solid complexes of 2-(2-benzimidazolylazo)-4-acetamidophenol with some transition metals

The preparation and characterization of 2-(2-benzimidazolylazo)-4-acetamidophenol (BIAAP) complexes are reported. Different physico-chemical methods like IR, Magnetic, solid reflectance spectra and molar conductance, were used to investigate the structure of BIAAP complexes. In particular, the thermal decomposition of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) complexes of BIAAP is studied in nitrogen atmosphere. All the complexes do not contain coordinated water molecules but contain (2-4) water molecules of crystallization. The water molecules were removed in a single step. The complexes of Co(II) and Ni(II) ions exhibited a phase transition and the decomposition or combustion of BIAAP occurred in the second and subsequent steps. The final decomposition products were identified by mass spectrometry as the corresponding metal oxides or carbonate. The activation thermodynamic parameters, such as, energy of activation, enthalpy, entropy and free energy change of the complexes were evaluated and the stabilities of the thermal decomposition of the complexes are discussed. From the kinetic point of view, it is found that the thermal stability of the complexes follows the order Ni(II) > Cu(II) > Zn(II) > Fe(III) > Co(II) > Cd(II).     

Syntheses, characterization, and dioxygen reactivities of Cu(I) complexes with cis,cis-1,3,5-triaminocyclohexane derivatives: a Cu(III)2O2 intermediate exhibiting higher C-H activation

Six Cu(I) complexes with cis,cis-1,3,5-triaminocyclohexane derivatives (R3CY, R = Et, iBu, and Bn), [Cu(MeCN)(Et3CY)]SbF6 (1), [Cu(MeCN)(iBu3CY)]SbF6 (2), [Cu(MeCN)(Bn3CY)]SbF6 (3), [Cu(CO)(Et3CY)]SbF6 (4), [Cu(CO)(iBu3CY)]SbF6 (5), and [Cu(CO)(Bn3CY)]SbF6 (6), were prepared to probe the ability of copper complexes to effectively catalyze oxygenation reactions. The complexes were characterized by elemental analysis, electrochemical and X-ray structure analyses, electronic absorption spectroscopy, IR spectroscopy, 1H NMR spectroscopy, and ESI mass spectrometry. The crystal structures of 1-3 and 6 and the CO stretching vibrations (nuCO) of 4-6 demonstrate that the ability of R3CY to donate electron density to the Cu(I) atom is stronger than that of the previously reported ligands, 1,4,7-triazacyclononane (R3TACN) and 1,4,7-triazacyclodecane (R3TACD). Reactions of complexes 1-3 with dioxygen in THF or CH2Cl2 at -105 to -80 degrees C yield bis(mu-oxo)dicopper(III) complexes 7-9 as intermediates as confirmed by electronic absorption spectroscopy and resonance Raman spectroscopy. The Cu-O stretching vibrations, nu(Cu-O) for 7 (16O2: 553, 581 cm-1and 18O2: 547 cm-1) and 8 (16O2: 571 cm-1 and 18O2: 544 cm-1), are observed in a lower energy region than previously reported for bis(micro-oxo) complexes. The decomposition rates of complexes 7-9 in THF at -90 degrees C are 2.78 x 10-4 for 7, 8.04 x 10-4 for 8, and 3.80 x 10-4 s-1 for 9. The decomposition rates of 7 and 8 in CH2Cl2 were 5.62 x 10-4 and 1.62 x 10-3 s-1, respectively, and the thermal stabilities of 7-9 in CH2Cl2 are lower than the values measured for the complexes in THF. The decomposition reactions obeyed first-order kinetics, and the H/D isotope experiments for 8 and 9 indicate that the N-dealkylation reaction is the rate-determining step in the decomposition processes. On the other hand, the decomposition reaction of 7 in THF results in the oxidation of THF (acting as an exogenous substrate) to give 2-hydroxy tetrahydrofuran and gamma-butyrolactone as oxidation products. Detailed investigation of the N-dealkylation reaction for 8 by kinetic experiments using N-H/D at -90 degrees C showed a kinetic isotope effect of 1.25, indicating that a weak electrostatic interaction between the N-H hydrogen and mu-oxo oxygen contributes to the major effect on the rate-determining step of N-dealkylation. X-ray crystal structures of the bis(micro-hydroxo)dicopper(II) complexes, [Cu2(OH)2(Et3CY)2](CF3SO3)2 (10), [Cu2(OH)2(iBu3CY)2](CF3SO3)2 (11), and [Cu2(OH)2(Bn3CY)2](ClO4)2 (12), which have independently been prepared as the final products of bis(micro-oxo)dicopper(III) intermediates, suggest that an effective interaction between N-H and mu-oxo in the Cu(III)2(micro-O)2 core may enhance the oxidation ability of the metal-oxo species.     

Syntheses, structures and magnetism of linear tri- and tetra-copper chains containing anions of N,N'-bis(pyrimidine-2-yl)formamidine

Reaction of Kpmf (pmf(-) = anion of N,N'-bis(pyrimidyl-2-yl)formamidine, Hpmf) with divalent copper salt CuX2 afforded the linear trinuclear complexes of the type [Cu3(pmf)4](X)2 (X = BF4, 1; NO3, 2; ClO4, 3), while reaction of Kpmf with monovalent copper salt CuX gave the linear tetranuclear complexes of the type Cu4(pmf)4X2 (X = Cl, 4; Br, 5). The copper atoms of complexes 1-5 are helically bridged by four pmf(-) ligands, resulting in three different coordination modes for the pmf(-) ligands. In complexes 1-3, one pmf(-) ligand adopts a new coordination mode with the two amine nitrogen atoms chelating to the central copper atom, while the other three feature chelation by one pyrimidyl and one adjacent amine nitrogen atoms. The Cu(II)...Cu(II) distances are 2.729(2) and 2.825(2) A for 1, 2.762(1) and 2.832(1) A for 2 and 2.732(1) and 2.827(1) A for 3. In complexes 4 and 5, the pmf(-) ligands are coordinated to the copper atoms in tetradentate fashion with each nitrogen atom coordinating to one Cu atom. The Cu...Cu distances are 2.580(1) and 2.549(1) A for 4 and 2.582(1) and 2.561(1) A for 5. Antiferromagnetic interactions between the copper ions are observed with calculated g and J values of 2.03(1) and -188(2) cm(-1) for 1, 2.09(1) and -268(3) cm(-1) for 2, and 2.09(1) and -486(2) cm(-1) for 5. By comparing the magnetic data it can be shown that the bonding mode of the pmf(-) ligand is one of the important factors in determining the strengths of the Cu...Cu interactions in linear trinuclear and tetranuclear copper complexes.     

Studies of Mn(II), Co(II), Ni(II) and Cu(II) Chelates with 3-phenyl-4-(p-methoxy- phenylazo)-5-pyrazolone

Mn(II), Co(II), Ni(II) and Cu(II) chelates with3-phenyl-4-(p-methoxyphenylazo)-5-pyrazolone have been synthesized and were characterized by elemental and thermal analyses as well as by IR, UV-VIS, ¹HNMR, conductometric and magnetic measurements. The first stage in the thermal decomposition process of these complexes shows the presence of water of hydration, the second denotes the removal of the coordinated water molecules. The final decomposition products were found to be the respective metal oxides. The data of the investigated complexes suggest octahedral geometry with respect to Co(II) 1:1, tetrahedral for Ni(II) 1:1and 2:3; square planar for Cu(II) 1:1 and 2:3; the complexes with no coordinated water molecules (2:3) Co(II) and Mn(II) complexes are tetrahedral. This revised version was published online in August 2006 with corrections to the Cover Date.     

Characterization of Ni(II) and Cu(II) complexes of 4-(2-Quinolylmethyleneamino)-1-phenyl-2,3-dimethyl-5-pyrazolone and their analytical applications

A synthesis of the new reagent 4-(2-quinolylmethyleneamino)-1-phenyl-2,3-dimethyl-5-pyrazolone (QPP) and of its complexes with Ni(II) and Cu(II) is described. The structure of the ligand itself and the nature of the bonding in complex molecules were determined by elemental analysis, IR, and mass spectrometry. The analysis of data showed that isolated crystal metal complexes are of the ML₂ type. The composition and stability constants of the complexes in water/methanol solutions, (methanol) = 0.16, at constant temperature 25 ±1 °C and ionic strength of 0.5 M (KNO₃) at different pH (4, 6, 8, and 10) have been determined spectrophotometrically. The results indicate that the metal complexes formed in the solution have a metal-to-ligand ratio 1:2. The reaction of QPP with Ni(II) and Cu(II) in solution was quantitatively studied. The lowest detection limit for the determination of Ni is 0.3 μg/ml while that for Cu is 0.05 μg/ml under the investigated experimental Conditions.     

Syntheses and structures of copper(I) complexes based on Cu(n)X(n) (X = Br and I; n = 1, 2 and 4) units and bis(pyridyl) ligands with longer flexible spacer

Self-assembly of four bis(pyridyl) ligands with longer flexible spacer: 1,4-bis(3-pyridylaminomethyl)benzene (L1), 1,4-bis(2-pyridylaminomethyl)benzene (L2), 1,3-bis(3-pyridylaminomethyl)benzene (L3) and 1,3-bis(2-pyridylaminomethyl)benzene (L4), and CuX (X = Br and I) leads to the formation of eight [Cu(n)X(n)]-based (X = Br and I; n = 1, 2, and 4) complexes, [Cu(2)I(2)L1(PPh(3))(4)] (1), [Cu(4)Cl(2)Br(2)(L4)(2)(PPh(3))(6)]·(CH(3)CN)(2) (2), [Cu(2)I(2)(L3)(2)] (3), {[Cu(2)Br(2)L2(PPh(3))(2)]·(CH(2)Cl(2))(2)}(n) (4), [CuIL1](n)·nCH(2)Cl(2) (5), [CuIL1](n) (6), [CuIL4](n) (7) and [Cu(2)I(2)L4](n) (8), which have been synthesized and characterized by elemental analysis, IR, TG, powder and single-crystal X-ray diffraction. Structural analyses show that the eight complexes possess an increasing dimensionality from 0D (1-3) to 1D (4) to 2D (5-8), in which 1 and 2 contain a CuX unit, 2-7 contain a Cu(2)X(2) unit and 8 contains a Cu(4)X(4) unit. Such evolvement indicates that the conformation of flexible bis(pyridyl) ligands and the participation of triphenylphosphine (PPh(3)) as a second ligand take an essential role in the framework formation of the Cu(i) complexes. Moreover, a pair of symmetry-related L3 ligands in complex 3 coordinate to the rhomboid Cu(2)I(2) dimer to form "handcuff-shaped" dinuclear structures, which are further joined together through intermolecular N-HI hydrogen bonds to furnish a 2D (4,4) layer. Although complexes 5 and 6 exhibit a similar 2D (4,4) layer constructed from L1 ligand bridging [Cu(2)I(2)](n) units, the different packing fashion of the layers leads to the formation of 3D porous frameworks of 5 and dense 3D frameworks of 6. The "twisted-boat" conformation of the Cu(4)I(4) tetramer unit in complex 8 has not been reported so far.     

配位化学中的直线自由能关系XXI: 铜(II)-13-取代苄基-1, 4, 8, 11-四氮杂环十四烷-12, 14-二酮配合物的生成及酸分解行为研究

采用pH法, 在25.0±0.1℃, I=0.1 mol.dm^-^3 (KNO3)条件下, 测定了13-取代苄基-1, 4, 8, 11-四氮杂环十四烷-12,14-二酮的质子化常数及其与Cu(II)配位的平衡常数。讨论了配体与金属离子的配位方式。在25.0±0.1℃, 离子强度为0.1mol.dm^-^3 (KNO3)下, 采用分光光度法, 研究了这些配体铜(II)配合物的酸分解动力学行为。探讨了配合物酸分解机理,得到了速控步的速率常数。发现配位反应平衡常数与配体的质子化常数及配合物酸分解反应速率常数之间存在较好的Hammett型和Bronsted型直线自由能关系。同时探讨了取代基对配合物生成及酸分解的影响情况。     

Synthesis, characterization, and DFT studies of thione and selone Cu(I) complexes with variable coordination geometries

Coordination of Cu(I) halides with N,N'-dimethylimidazole selone (dmise) and thione (dmit) ligands was examined by treating CuX (X = Cl, Br, I) with one or two equivalents of dmise or dmit. The reaction of CuI and CuBr with one molar equivalent of dmise results in unusual selenium-bridged tetrameric Cu(4)(μ-dmise)(4)(μ-X)(2)X(2) copper complexes with average Cu-Se bond lengths of 2.42 ? and a Cu(2)(μ-X)(2) core (X = I (1) or Br (6)) that's in a rhomboidal structure. The reaction of CuX (X = Cl, Br, and I) with two equivalents of dmit or dmise results in trigonal planar Cu(I) complexes of two different conformations with the formula Cu(dmit)(2)X (3a, 3b, 4, and 7) or Cu(dmise)(2)X (2, 5, and 8) with average Cu-S and Cu-Se bond lengths of 2.23 ? and 2.34 ?, respectively. The coordination geometry around the copper center in complexes 1 to 8 is determined by the type of halide and chalcogenone ligand used, intramolecular π-π interactions, and short contact interactions between X-H (X = I, Br, Cl, Se or S). The theoretical DFT calculations are in good agreement with experimental X-ray structural data and indicate that dmise ligands are required for formation of the tetrameric complexes 1 and 6. Electrochemical studies show that the trigonal copper selone complexes have more negative potentials relative to analogous copper thione complexes by an average of 108 mV.     

Synthesis, X-ray crystal structures, and phosphate ester cleavage properties of bis(2-pyridylmethyl)amine copper(II) complexes with guanidinium pendant groups

Three new derivatives of bis(2-pyridylmethyl)amine (DPA) featuring ethylguanidinium (L (1)), propylguanidinium (L (2)), or butylguanidinium (L (3)) pendant groups have been prepared by the reaction of N, N- bis(2-pyridylmethyl)alkane-alpha,omega-diamines with 1 H-pyrazole-1-carboxamidine hydrochloride. The corresponding mononuclear copper(II) complexes were prepared by reacting the ligands with copper(II) nitrate and were isolated as [Cu(LH (+))(OH 2)](ClO 4) 3. xNaClO 4. yH 2O ( C1: L = L (1), x = 2, y = 3; C2: L = L (2), x = 2, y = 4; C3: L = L (3), x = 1, y = 0) following cation exchange purification. Recrystallization yielded crystals of composition [Cu(LH (+))(X)](ClO 4) 3.X ( C1': L = L (1), X = MeOH; C2': L = L (2), X = H 2O; C3': L = L (3), X = H 2O), which were suitable for X-ray crystallography. The crystal structures of C1', C2', and C3' indicate that the DPA moieties of the ligands coordinate to the copper(II) centers in a meridional fashion, with a water or methanol molecule occupying the fourth basal position. Weakly bound perchlorate anions located in the axial positions complete the distorted octahedral coordination spheres. The noncoordinating, monoprotonated guanidinium groups project away from the Cu(II)-DPA units and are involved in extensive charge-assisted hydrogen-bonding interactions with cocrystallized water/methanol molecules and perchlorate anions within the crystal lattices. The copper(II) complexes were tested for their ability to promote the cleavage of two model phosphodiesters, bis( p-nitrophenyl)phosphate (BNPP) and uridine-3'- p-nitrophenylphosphate (UpNP), as well as supercoiled plasmid DNA (pBR 322). While the presence of the guanidine pendants was found to be detrimental to BNPP cleavage efficiency, the functionalized complexes were found to cleave plasmid DNA and, in some cases, the model ribose phosphate diester, UpNP, at a faster rate than the parent copper(II) complex of DPA.     

Spectroscopic and biological approach of Ni(II) and Cu(II) complexes of 2-pyridinecarboxaldehyde thiosemicarbazone

Ni(II) and Cu(II) complexes having the general composition [M(L)(2)X(2)] [where L=2-pyridinecarboxaldehyde thiosemicarbazone, M=Ni(II) and Cu(II), X=Cl(-), NO(3)(-) and 1/2 SO(4)(2-)] have been synthesized. All the metal complexes were characterized by elemental analysis, molar conductance, magnetic moment, mass, IR, EPR and electronic spectral studies. The magnetic moment measurements of the complexes indicate that all the complexes are of high-spin type. On the basis of spectral studies an octahedral geometry has been assigned for Ni(II) complexes whereas tetragonal geometry for Cu(II) except [Cu(L)(2)SO(4)] which posseses five coordinated geometry. The ligand and its metal complexes were screened against phytopathogenic fungi and bacteria in vitro.     

Synthesis and structural studies of (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}pyridin-2-yl)imino]butan-2-one oxime, ligand and its mono-, di- and trinuclear copper(II) complexes

A new dioxime ligand, (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}-pyridin-2-yl)imino]butan-2-one oxime, (H₂Pymdo) (3) has been synthesized in H₂O by reacting 2,3-butenedione monoxime (2) with 2,6-diaminopyridine. Mono-, di- and tri-nuclear copper(II) complexes of the dioxime ligand (H₂Pymdo) and/or 1,10-phenanthroline have been prepared. The dioxime ligand (H₂Pymdo) and its copper(II) complexes were characterized by ¹H-n.m.r., ¹³C-n.m.r. and elemental analyses, magnetic moments, i.r. and mass spectral studies. The mononuclear copper(II) complex of H₂Pymdo was found to have a 1:1 metal:ligand ratio. Elemental analyses, stoichiometric and spectroscopic data of the metal complexes indicated that the metal ions are coordinated to the oxime and imine nitrogen atoms (C=N). In the dinuclear complexes, in which the first Cu(II) ion was complexed with nitrogen atoms of the oxime and imine groups, the second Cu(II) ion is ligated with dianionic oxygen atoms of the oxime groups and are linked to the 1,10-phenanthroline nitrogen atoms. The trinuclear copper(II) complex (6) was formed by coordination of the third Cu(II) ion with dianionic oxygen atoms of each of two molecules of the mononuclear copper(II) complexes. The data support the proposed structure of H₂Pymdo and its Cu(II) complexes.     

Mixed ligand complexes of Cu(II)-2-(2-pyridyl)-benzimidazole and aliphatic or aromatic dicarboxylic acids: Synthesis, characterization and biological activity

The synthesis and structural characterization of mixed ligand complexes derived from 2-(2-pyridyl)-benzimidazole (PBI) (1ry ligand) and aliphatic or aromatic dicarboxylic acids (2ry ligand) are reported. Cu(II) complexes were characterized on the bases of their elemental analyses, IR, ESR and thermal analyses. The elemental analysis indicated the formation of mixed ligand complexes in a mole ratio 1:1:1 (Cu:L(1):L(2)), L(1)=PBI and L(2)=oxalic acid, phthalic acid or malonic acid. IR spectra showed that PBI acts as a neutral bidentate coordinated to the Cu(II) via the pyridyl and imidazolyl nitrogen atoms. The dicarboxylic acids are bidentate with monodentate carboxylate groups. Thermal decomposition study of complexes was monitored by thermogravimetric (TG) and derivative thermogravimetric (DTG) analysis in N(2) atmosphere. The decomposition course and steps were analysed and the activation parameters of the nonisothermal decomposition were calculated from the TG curves and discussed. The isolated metal chelates were screened for their antimicrobial activities and the results are reported, discussed and compared with some known antibiotics.     

Structural comparison of copper(I) and copper(II) complexes with tris(2-pyridylmethyl)amine ligand

Copper(I) complexes with the tris(2-pyridylmethyl)amine (TPMA) ligand were synthesized and characterized to examine the effect of counteranions (Br(-), ClO(4)(-), and BPh(4)(-)), as well as auxiliary ligands (CH(3)CN, 4,4'-dipyridyl, and PPh(3)) on the molecular structures in both solid state and solution. Partial dissociation of one of the pyridyl arms in TPMA was not observed when small auxiliary ligands such as CH(3)CN or Br(-) were coordinated to copper(I), but was found to occur with larger ones such as PPh(3) or 4,4'-dipyridyl. All complexes were found to adopt a distorted tetrahedral geometry, with the exception of [Cu(I)(TPMA)][BPh(4)], which was found to be trigonal pyramidal because of stabilization via a long cuprophilic interaction with a bond length of 2.8323(12) ?. Copper(II) complexes with the general formula [Cu(II)(TPMA)X][Y] (X = Cl(-), Br(-) and Y = ClO(4)(-), BPh(4)(-)) were also synthesized to examine the effect of different counterions on the geometry of [Cu(II)(TPMA)X](+) cation, and were found to be isostructural with previously reported [Cu(II)(TPMA)X][X] (X = Cl(-) or Br(-)) complexes.