通过金属离子刺激调节金属有机骨架结构用于光催化CO2还原

通过自组装得到一种具有适中配位键强度和适度骨架柔性的二维Cd基金属有机骨架(MOF){[Cd (HL)(BPY)_0.5(H₂O)]·2H₂O}_n (1)，其中H₃L=4，4''，4″-(亚硝基三(亚甲基))三苯甲酸，BPY=4，4''-联吡啶)。由于其独特的结构特征，在金属离子(Zn²⁺/Ni²⁺/Co²⁺)刺激下，1逐渐转变成相应金属离子主导的MOF结构2、3和4。在此过程中，随着金属离子Cd²⁺→Zn²⁺、Cd²⁺→Ni²⁺和Cd²⁺→Co²⁺的交换，1通道中自由的Cd²⁺和L^3-与MOF的骨架进行融合，导致通道空间的扩大，发生次级构筑单元(SBU)的转变，进而形成可调节的骨架。光催化二氧化碳还原结果表明，由离子交换所得到的新结构在催化效率上并没有很大改观，但在产物选择性上却有极大地提升(其中配合物3展示出100%的CO选择性)。     

预处理气氛对CuO/CeO2/γ-Al2O3催化剂表面性质及“NO+CO”反应性能的影响

用不同的预处理气氛制备了CeO₂/γ-Al₂O₃载体以调节表面Ce的价态,并以Cu(CH₃COO)₂为前驱体制备了CuCeAl催化剂。XRD和H₂-TPR的结果表明在还原气氛下处理的CeO₂/γ-Al₂O₃载体具有更多的活性氧原子,因此相应的CuCeAl催化剂表面有更多分散态的Cu²⁺/Cu⁺物种。NO+CO反应的结果表明分散态的Cu²⁺/Cu⁺是NO转化的活性物质,而Cu⁰在低温下具有较好的N₂选择性。因此,同时含有分散态Cu²⁺/Cu⁺和少量晶相Cu⁰的催化剂具有最好的催化性能。     

两种3D微孔Zn-MOF对水溶液中Fe3+、Cr2O72-和丙酮分子的荧光传感

通过溶剂热法合成了2种三维微孔锌金属有机框架材料,其分子式为[Zn₃(DBA)(OH)(1,10-phen)₂]_n(1)和{[Zn₂(HDBA)(4,4''-bipy)_1.5]·H₂O}_n(2)(H₅DBA=3,5-二(2'',4''-对羧基苯基)苯甲酸;1,10-phen=1,10-菲咯啉;4,4''-bipy=4,4''-联吡啶)。结构分析表明,配合物1为三核锌基金属单元的三维微孔骨架,配合物2为双核锌基的微孔结构。与2相比,配合物1在水中具有较强的发光性能,可作为检测Fe³⁺、Cr₂O₇^2-和丙酮分子的发光传感器,具有较高的选择性和灵敏度。     

气相中Cu+和Zn+与CS2反应的计算研究

以Cu⁺和Zn⁺与CS₂反应作为第一过渡金属离子与CS₂反应的范例体系. 采用密度泛函UB3LYP/6-311+G^*方法计算研究了第一过渡金属离子在基态和激发态与CS₂反应的反应机理. 全参数优化了反应势能面上各驻点的几何构型, 用频率分析方法和内禀反应坐标(IRC)方法对过渡态进行了验证. 并用UCCSD(T)/6-311G^*方法对各驻点作了单点能量校正. 在Cu⁺与CS₂反应中, 计算了单重态初始中间体¹IM1到三重态插入型中间体³IM2的反应交叉势能面. 确定了第一过渡金属离子与CS₂的反应为插入-消去反应, 找到了基态和激发态金属离子与CS₂反应的主要通道.     

气相中Cu+和Zn+与CS2反应的计算研究

以Cu⁺和Zn⁺与CS₂反应作为第一过渡金属离子与CS₂反应的范例体系. 采用密度泛函UB3LYP/6-311+G^*方法计算研究了第一过渡金属离子在基态和激发态与CS₂反应的反应机理. 全参数优化了反应势能面上各驻点的几何构型, 用频率分析方法和内禀反应坐标(IRC)方法对过渡态进行了验证. 并用UCCSD(T)/6-311G^*方法对各驻点作了单点能量校正. 在Cu⁺与CS₂反应中, 计算了单重态初始中间体¹IM1到三重态插入型中间体³IM2的反应交叉势能面. 确定了第一过渡金属离子与CS₂的反应为插入-消去反应, 找到了基态和激发态金属离子与CS₂反应的主要通道.     

Ba0.98Bi0.02(Ti0.9Zr0.1)1-xCuxO3陶瓷的介电性能、弛豫行为与结晶化学特性

采用固相合成法, Bi3+作施主掺杂A位, Cu₂₊作受主掺杂B位, 制备了Ba_0.98Bi_0.02(Ti_0.9Zr_0.1)_1-xCu_xO₃(x=0, 0.01, 0.02, 0.03)陶瓷样品。借助XRD、LCR等研究了该陶瓷的结构与介电性能。结果表明:当x=0.03时, 陶瓷样品出现第二相。通过GULP模拟, 缺陷偶极子的稳定性从低到高依次为:[2Bi_Ba^·+V_Ba"]、[2Bi_Ba^·+Cu_Ti/Zr"]、[Cu_Ti/Zr"+V_O^··], 结合实验可知:介电弛豫程度与晶体中缺陷偶极子的存在形式相关, 其中x=0.01时, 晶体中以[2Bi_Ba^·+Cu_Ti/Zr"]为主。随Cu₂₊掺杂量的增加, 介电常数增加, 介电常数与B位键价和呈反比变化、与八面体BO₆的体积呈正比变化。     

N-乙基咔唑-3-甲醛席夫碱荧光探针的合成及其检测Cu2+性质

以咔唑为原料,经过两步反应制备得到N-乙基咔唑-3-甲醛,其结构经X射线单晶衍射测定属于单斜晶系,空间群为P2₁/n。再以N-乙基咔唑-3-甲醛与1,3-二氨-2-丙醇为原料,设计、合成了一种新型双席夫碱荧光探针分子CMP。借助荧光光谱在体积比为6∶4的DMSO/H₂O缓冲溶液(Tris-HCl,pH=7.0)中研究了探针CMP对Cu²⁺的选择性识别。研究结果表明,探针CMP与Cu²⁺以1∶2的比例配位,结合常数为1.52×10⁵ L·mol^-1,检出限为0.205 μmol·L^-1。回收实验表明,探针分子CMP可应用于环境水样中Cu²⁺的检测。     

一种铜配位聚合物的合成及其对Fe3+和对硝基苯酚的荧光传感

在水热条件下,基于H₅depa配体和2,2''-bpy配体设计并合成了一个配位聚合物{[Cu₂(Hdepa)(2,2''-bpy)₂(H₂O)₂]·2H₂O}_n(H₅depa=2,2'',3,4'',5-二苯醚五羧酸,2,2''-bpy=2,2''-联吡啶)。用元素分析、红外光谱、单晶X射线衍射和热稳定性分析对其进行了结构表征。配位聚合物1中2个中心Cu²⁺离子均采用五配位模式,呈三角双锥几何构型。未完全去质子化的Hdepa^4-配体采用了μ₄-η¹-η¹-η¹-η¹配位方式。其二维层之间通过弱的氢键相互作用扩展为三维超分子网状结构。1可作为一种高灵敏度、选择性好、多响应的荧光传感器,可快速检测Fe³⁺和对硝基苯酚(4-NP),此外还研究了其荧光猝灭机理。     

基于苯并噻唑Zn2+荧光探针及其细胞造影应用

设计合成基于苯并噻唑Zn²⁺荧光增强型探针BHP,在HEPES缓冲液中测其对Zn²⁺识别性能。实验结果表明,BHP对Zn²⁺有较高的选择性,对其他金属离子如Cd²⁺,Fe²⁺,Ni²⁺,Pb²⁺,Hg²⁺,Al³⁺,Mn²⁺,Ag⁺,Cu²⁺,Co²⁺,Na⁺,K⁺,Mg²⁺和Ca²⁺无明显荧光增强响应。BHP与Zn²⁺按1：1计量比配位,在生理条件下荧光强度不受pH值影响。在HeLa细胞中对Zn²⁺的造影表明BHP可用于生物体Zn²⁺检测。     

α-Fe2O3、γ-Al2O3、SiO2混合体系的表面配位反应

运用自动电位滴定技术分别研究了纳米α-Fe₂O₃、γ-Al₂O₃、SiO₂单一体系及三组分混合体系中氧化物表面的酸碱性质和对重金属离子Cu²⁺、Pb²⁺、Zn²⁺的吸附行为. 依据表面配位理论恒电容模式(CCM), 计算了相应的表面酸碱配位常数. 结果表明: α-Fe₂O₃/γ-Al₂O₃/SiO₂三组分混合体系的表面化学反应并非是单一体系的简单叠加, 而是存在着不同矿物表面间复杂的交互作用. 三组分表面酸碱反应平衡式和相应的酸碱反应平衡常数分别为: ≡XOH₂⁺?≡XOH+H⁺ (lgK_a1=-4.23), ≡XOH?≡XO^-+H⁺(lgK_a2=-8.41). 根据重金属离子Cu²⁺、Pb²⁺、Zn²⁺在α-Fe₂O₃/γ-Al₂O₃/SiO₂混合体系表面的吸附行为, 计算得到Cu²⁺、Pb²⁺、Zn²⁺在混合体系表面配位反应及其平衡常数如下: ≡XOH＋M²⁺?≡XOM⁺+H⁺; lgK=-2.20, -1.90, -3.20 (M=Cu, Pb, Zn).     

Fe(C_5H_4-CH_2-Trp-OMe)_2的合成、晶体结构及金属离子识别性能

以优化的两步一锅反应法合成了生物金属有机化合物Fe(C_5H_4-CH_2-Trp-OMe)2(Fc L),通过NMR、HRMS及IR等对其结构进行了表征,利用X射线单晶衍射测定了分子结构。循环伏安法研究表明Fc L在0.00~0.90 V电位范围内,给出一稳定的、形态良好的氧化还原峰,这归于化合物中Fc/Fc+电对的氧化还原过程。电化学金属离子识别研究显示FcL在过渡金属离子Zn~(2+)和Cu~(2+)的存在下,导致了配体Fc/Fc+式量电位的显著阳极移动,其ΔE0′对Zn~(2+)和Cu~(2+)分别为342和335 m V,表明了Fc L对Zn~(2+)和Cu~(2+)具有良好的识别能力。     

Synthesis and properties of m‐ferrocenylbenzoylthiadiazole derivatives

A series of m‐ferrocenylbenzoylthiadiazole compounds, namely FcL₁–FcL₇, were synthesized using 3‐ferrocenylbenzoic acid and 2‐amino‐5‐aryl‐1,3,4‐thiadiazole as raw materials. These compounds were characterized using infrared and NMR spectroscopies and elemental analysis. The crystal structure of FcL₇ was determined using X‐ray diffraction. The electrochemical behaviors of FcL₁–FcL₇ revealed that the redox reactions on the surface of electrodes were reversible with a single‐electron mechanism. Also, FcL₁–FcL₇ demonstrated certain redox responses to Pb²⁺ and Zn²⁺. Moreover, FcL₅–FcL₇ exhibited good inhibition against human esophageal cancer cells in anticancer activity tests.     

Syntheses,structures of N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes and their application as redox sensor for Cu2+ ion

Rigid N‐(substituted)‐2‐aza‐[3]‐ferrocenophanes L1 and L2 were easily synthesized from 1,1 ‐dicarboxyaldehydeferrocene and the corresponding amines. Ligands L1 and L2 were characterized by ¹H NMR, ¹³C NMR and single‐crystal X‐ray crystallography. The coordination abilities of L1 and L2 with metal ions such as Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ were evaluated by cyclic voltammetry. The electrochemical shift (ΔE_1/2) of 125 mV was observed in the presence of Cu²⁺ ion, while no significant shift of the Fc/Fc + couple was observed when Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺, Cd²⁺ metal ions were added to the solution of L1 in the mixture of MeOH and H₂O. Moreover, the extent of the anodic shift of redox potentials was approximately equal to that induced by Cu²⁺ alone when a mixture of Cu²⁺, Mg²⁺, Ni²⁺, Zn²⁺, Pb²⁺ and Cd²⁺ was added to a solution of L1. Ligand L1 was proved to selectively sense Cu²⁺ in the presence of large, excessive first‐row transition and late‐transition metal cations. The coordination model was proposed from the results of controlled experiments and quantum calculations. Copyright © 2012 John Wiley & Sons, Ltd.     

The stereochemistry of Tutton's salts X2[M(H2O)6](YO4)2

Neutron structure determinations have been made of Tutton's salts, X₂[M(H₂O)₆] (YO₄)₂, where Y = Se, X = K⁺, M = Cu²⁺; Y = S, X = K⁺, M = Ni²⁺, Cu²⁺, Zn²⁺; X = Rb⁺, Cs⁺, M = Cu²⁺. This work has shown that there are extensive hydrogen networks with almost linear hydrogen bonds from [M(H₂O)₆]²⁺ to (YO₄)^2?. The (H … O) distance increases in the Cu²⁺ series for X = K⁺ to Cs⁺ but there is no difference for the potassium copper salts when Y = Se or S. Three different distorted [M(H₂O)₆]²⁺ octahedra were found in the series (orthorhombic, tetragonal with two long and four short, or four long and two short bonds). The interatomic distances from X⁺ to the neighboring O in a distorted XO₈⁺ dodecahedron increases with increased cation size, implying that the X⁺ polyhedron is maintaining its shape.     

Diiodine complex of diferrocenyl(phenyl)phosphine sulfide: the structural and electrochemical behaviour of Fc2(Ph)PS · I2

The title compound, Fc₂(Ph)PS · I₂, has been prepared and characterised in both the solid state and solution. Single crystal X-ray crystallography reveals that the adduct adopts a molecular charge-transfer structure in the solid state. Mössbauer spectroscopy confirms the presence of low spin Fe²⁺ but also indicates the presence of ca. 24% of an Fe³⁺ species. The electrochemistry of Fc₂(Ph)PS · I₂, Fc₂(Ph)PS and Fc₂(Ph)P has been studied using a combination of cyclic voltammetry and differential pulse voltammetry. The data for Fc₂(Ph)PS · I₂ show two redox processes, consistent with the sequential oxidation of the ferrocenyl groups to ferrocenium species.     

Synthesis,structural characterization and electrochemical recognition of metal ions of two new ferrocenylhydrazone‐based receptors

Two new ferrocenylhydrazone‐based receptors FcL₁ and FcL₂ were prepared and the X‐ray crystal structure of FcL₁ was described. The electrochemical studies reveal that the receptor FcL₁ is responsive to Hg²⁺ and Cr³⁺, whereas, receptor FcL₂ only responsive to Hg²⁺. The maximum electrochemical shift of FcL₁ for Cr³⁺ is about 56 mV. Copyright © 2009 John Wiley & Sons, Ltd.     

微波辐射对浆态床合成甲醇CuO/ZnO/Al2O3催化剂前驱体晶相转变的影响

在微波辐射条件下,对CuO/ZnO/Al2O3催化剂的沉淀母液进行老化,通过XRD、TG、H2-TPR,FTIR、HR-TEM和XPS对前驱体及催化剂微观结构的进行表征,探讨了CuO/ZnO/Al2O3催化剂前驱体晶相转变过程中微波辐射的作用。结果表明,微波辐射有利于Cu2+取代Zn5(CO3)2(OH)6中Zn2+的同晶取代反应。微波辐射的老化过程中,首先发生Cu2+取代Zn5(CO3)2(OH)6中Zn2+生成(Cu,Zn)5(CO3)2(OH)6的同晶取代反应,并于1.0 h内基本完成;随着老化时间继续延长,主要进行Zn2+取代Cu2(CO3)(OH)2中Cu2+生成(Cu,Zn)2(CO3)(OH)2的同晶取代反应,同时(Cu,Zn)5(CO3)2(OH)6进一步结晶。与常规老化1 h制备的前驱体相比,微波辐射老化1.0 h制备的前驱体含有较多的(Cu,Zn)5(CO3)2(OH)6物相,有助于增强焙烧后CuO/ZnO/Al2O3催化剂中CuO-ZnO协同作用,提高表面铜含量,进而提高CuO/ZnO/Al2O3催化剂在浆态床合成甲醇的催化活性和稳定性,在400 h浆态床合成甲醇评价期间,甲醇时空收率最大达318.9 g.kg-1.h-1,失活率仅为0.11%.d-1。     

Cu/Cu2O Electrodes and CO2 Reduction to Formic Acid: Effects of Organic Additives on Surface Morphology and Activity

Copper/copper oxide (Cu/Cu₂O) electrodes are known to display interesting electrocatalytic performances for the reduction of CO₂, and thus, deserve further investigation for optimization. Here, we show that the addition of nitrogen‐based organic additives greatly improves the activity of these electrodes (higher current densities, greater selectivity, and higher faradaic yields). The best effector is found to be tetramethyl cyclam. For example, electrolysis at ?2.0 V versus Fc⁺/Fc in CO₂‐saturated DMF/H₂O (99:1, v/v) in the presence of this effector results in formic acid with almost 90 % faradaic yield. SEM and XPS analysis of the electrode surface reveals that the organic additive promotes the formation of active Cu⁰ nanoparticles from Cu₂O during electrolysis. This simple approach provides a straightforward strategy toward the optimization of Cu/Cu₂O electrodes.     

溶剂极性对微波辐射老化制备前驱体及CuO/ZnO/Al2O3催化剂结构的影响

在制备CuO/ZnO/Al2O3催化剂的老化过程中,采用微波辐射老化技术,着重研究了溶剂极性对前躯体物相组成,烧后CuO/ZnO/Al2O3催化剂结构及其在浆态床合成甲醇工艺中催化性能的影响。通过XRD、DTG、H2-TPR,FTIR、HR-TEM和XPS对前驱体及催化剂表征表明,沉淀母液在微波辐射条件下进行老化,溶剂的极性对前躯体物相组成及催化剂结构影响显著。随着溶剂极性的增大,Zn2+/Cu2+取代Cu2(CO3)(OH)2/Zn5(CO3)2(OH)6中Cu2+/Zn2+的取代反应增强,使得前躯体中(Cu,Zn)5(CO3)2(OH)6和(Cu,Zn)2(CO3)(OH)2物相的含量增多,结晶度提高,导致烧后CuO/ZnO/Al2O3催化剂中CuO-ZnO协同作用增强,且CuO晶粒减小,表面Cu含量增加,催化剂活性和稳定性提高。水溶剂的极性最大,制备的催化剂活性和稳定性最好,甲醇的时空收率(STY)和平均失活率分别为320 mg.g-1.h-1和0.11%.d-1。