Synthesis, crystal structures, and electrochemical studies of ferrocenyl heterocyclic carbonylhydrazone receptors

Two new novel ferrocenylaclyhydrazone-based receptors FcL₁ and FcL₂ were prepared and characterized by ¹H NMR, IR, elemental analysis. X-ray crystallographic reveals that FcL₁ belongs to Monoclinic system, with space group P2(1)/c, and FcL₂ belongs to Hexagonal system with space group P6(5). It forms a novel helical chain by self-assembly. The electrochemical studies reveal that the formal potential (E ⁰) of FcL₁ and FcL₂ show a gradual decrease in the order Fc(Ferrocene) < FcL₁ < FcL₂ and FcL₁ is responsive to Pb²⁺. The maximum electrochemical shift of FcL₁ for Pb²⁺ is about 44 mV. FcL₁ shows selective potential response to Pb(II) ion.     

Synthesis and properties of m‐ferrocenylbenzoylthiadiazole derivatives

A series of m‐ferrocenylbenzoylthiadiazole compounds, namely FcL₁–FcL₇, were synthesized using 3‐ferrocenylbenzoic acid and 2‐amino‐5‐aryl‐1,3,4‐thiadiazole as raw materials. These compounds were characterized using infrared and NMR spectroscopies and elemental analysis. The crystal structure of FcL₇ was determined using X‐ray diffraction. The electrochemical behaviors of FcL₁–FcL₇ revealed that the redox reactions on the surface of electrodes were reversible with a single‐electron mechanism. Also, FcL₁–FcL₇ demonstrated certain redox responses to Pb²⁺ and Zn²⁺. Moreover, FcL₅–FcL₇ exhibited good inhibition against human esophageal cancer cells in anticancer activity tests.     

Eco‐friendly Sensors Developed by Herbal Based Silver Nanoparticles for Electrochemical Detection of Mercury (II) Ion

In our study, the single‐use & eco‐friendly electrochemical sensor platform based on herbal silver nanoparticles (AgNPs) was developed for detection of mercury (II) ion (Hg²⁺). For this purpose, the surface of pencil graphite electrode (PGE) was modified with AgNPs and folic acid (FA), respectively. The concentrations of AgNPs and FA were firstly optimized by differential pulse voltammetry (DPV) to obtain an effective surface modification of PGE. Each step at the surface modification process was characterized by using cyclic voltammetry (CV) and electrochemical impedence spectroscopy (EIS). The limit of detection (LOD) for Hg²⁺ was estimated and found to be 8.43 μM by CV technique. The sensor presented an excellent selectivity for Hg²⁺ against to other heavy metal ions such as Ca²⁺, Cd²⁺, Cr³⁺, Cu²⁺, Mg²⁺, Ni²⁺, Pb²⁺, Zn²⁺, Co²⁺ and Mn²⁺. Moreover, a rapid, selective and sensitive detection of Hg²⁺ was successfully performed in the samples of tap water within 1 min.     

Turn‐on fluorogenic and chromogenic detection of cations in complete water media with poly(N‐vinyl pyrrolidone) bearing rhodamine B derivatives as polymeric chemosensor

A hydrophobic organic monomer GRBE with a polymerizable methacrylester moiety had been synthesized by reaction of rhodamine B‐ethanediamine with glycidyl methacrylate. A water‐soluble polymeric chemosensor poly(VP‐GRBE) had been prepared via copolymerization with a hydrophilic comonomer (vinylpyrrolidone) and GRBE, which was able to sense environmentally poisonous cations in completely aqueous media. The chemosensor was a derivative of rhodamine B, which behaved as a fluorescent and chromogenic sensor toward various heavy cations, particularly Cr³⁺, Fe³⁺, and Hg²⁺. Titration curves of Cr³⁺, Fe³⁺, and Hg²⁺ were constructed using rapid, cheap, and widely available technique of fluorescence spectroscopies. The detection limits for Cr³⁺, Fe³⁺, or Hg²⁺ ions were found to be 2.20 × 10^?12, 2.39 × 10^?12, and 1.11 × 10^?12 mol/l in the same medium, respectively. Moreover, a colorimetric response from the polymeric chemosensor permitted the detection of Cr³⁺, Hg²⁺, or Fe³⁺ by “naked eye” because of the development of a pink or brown yellow color when Cr³⁺, Hg²⁺, or Fe³⁺ cations interacted with the copolymer in aqueous media. Copyright © 2015 John Wiley & Sons, Ltd.     

BODIPY Immobilized MCM-41 Based Multianalyte Sensor: Application in Detection and Removal of Trivalent (Al3+, Cr3+) and Divalent (Cu2+, Hg2+) Metal Ions in Aqueous Media

In the present study, a novel p-phenylcarboxylic acid BODIPY ( L ) immobilized MCM-41 based solid chemosensor material L-propylsilyl@MCM-41 ( MS4 ) was developed to detect multiple metal ions in a pure aqueous medium. The synthesized solid chemosensor material MS4 shows high sensitivity and removal ability towards trivalent (Al³⁺, Cr³⁺) and divalent (Cu²⁺, Hg²⁺) metal ions. The emission intensity of MS4 enhanced multifold selectively in the presence of trivalent (Al³⁺, Cr³⁺) metal ions and shows quenching in the presence of divalent (Cu²⁺, Hg²⁺) metal ions. The limit of detection was calculated to be in the nanomolar range with Al³⁺, Cr³⁺, Cu²⁺_, and Hg²⁺ metal ions in the aqueous medium. The spectroscopic and analytical results suggest that MS4 selectively binds with Al³⁺ and Cr³⁺ through −NH functionality and with Hg²⁺ and Cu²⁺ through −COOH functionality of p-phenylcarboxylic acid BODIPY ( L ). Further, MS4 selectively removes Al³⁺, Cr³⁺, Cu²⁺, and Hg²⁺ metal ions from the aqueous media with removal efficiency of 97.28 %, 96.34 %, 87.19 %, and 95.63 %, respectively. No noticeable change in the concentration was observed for other metal ions. The recycling potential of MS4 was evaluated using EDTA for up to seven cycles with no significant reduction in sensing capability.     

Fe（C5H4-CH2-Trp-OMe）2的合成、晶体结构及金属离子识别性能

摘要： 以优化的两步一锅反应法合成了生物金属有机化合物Fe（C₅H₄-CH₂-Trp-OMe）₂（FcL）,通过NMR、HRMS及IR等对其结构进行了表征,利用X射线单晶衍射测定了分子结构。循环伏安法研究表明FcL在0.00~0.90 V电位范围内,给出一稳定的、形态良好的氧化还原峰,这归于化合物中Fc/Fc⁺电对的氧化还原过程。电化学金属离子识别研究显示FcL在过渡金属离子Zn²⁺和Cu²⁺的存在下,导致了配体Fc/Fc⁺式量电位的显著阳极移动,其△E^0''对Zn²⁺和Cu²⁺分别为342和335 mV,表明了FcL对Zn²⁺和Cu²⁺具有良好的识别能力。     

Polythymine Oligonucleotide‐Modified Gold Electrode for Voltammetric Determination of Mercury(II) in Aqueous Solution

Polythymine oligonucleotide (PTO)‐modified gold electrode (PTO/Au) was developed for selective and sensitive Hg²⁺ detection in aqueous solutions. This modified electrode was prepared by self‐assembly of thiolated polythymine oligonucleotide (5′‐SH‐T₁₅‐3′) on the gold electrode via Au? S bonds, and then the surface was passivated with 1‐mercaptohexanol solution. The proposed electrode utilizes the specific binding interactions between Hg²⁺ and thymine to selectively capture Hg²⁺, thereby reducing the interference from coexistent ions. After exchanging the medium, electrochemical reduction at ?0.2 V for 60 s, voltammetric determination was performed by differential pulse voltammetry using 10 mM HEPES; pH 7.2, 1 M NaClO₄ as supporting electrolyte. This electrode showed increasing voltammetric response in the range of 0.21 nM Hg²⁺, with a relative standard deviation of 5.32% and a practical detection limit of 60 pM. Compared with the conventional stripping approach, the modified electrode exhibits good sensitivity and selectivity, and is expected to be a new type of green electrode.     

A Multi‐responsive Regenerable Europium–Organic Framework Luminescent Sensor for Fe3+, CrVI Anions,and Picric Acid

A novel luminescent microporous lanthanide metal–organic framework (Ln‐MOF) based on a urea‐containing ligand has been successfully assembled. Structural analysis revealed that the framework features two types of 1D channels, with urea N?H bonds projecting into the pores. Luminescence studies have revealed that the Ln‐MOF exhibits high sensitivity, good selectivity, and a fast luminescence quenching response towards Fe³⁺, Cr^VI anions, and picric acid. In particular, in the detection of Cr₂O₇^2? and picric acid, the Ln‐MOF can be simply and quickly regenerated, thus exhibiting excellent recyclability. To the best of our knowledge, this is the first example of a multi‐responsive luminescent Ln‐MOF sensor for Fe³⁺, Cr^VI anions, and picric acid based on a urea derivative. This Ln‐MOF may potentially be used as a multi‐responsive regenerable luminescent sensor for the quantitative detection of toxic and harmful substances.     

Selective Detection of Hg2+ Ions with Boron Dipyrromethene‐Based Fluorescent Probes Appended with a Bis(1,2,3‐triazole)amino Receptor

By using a copper‐promoted alkyne–azide cycloaddition reaction, two boron dipyrromethene (BODIPY) derivatives bearing a bis(1,2,3‐triazole)amino receptor at the meso position were prepared and characterized. For the analogue with two terminal triethylene glycol chains, the fluorescence emission at 509 nm responded selectively toward Hg²⁺ ions, which greatly increased the fluorescence quantum yield from 0.003 to 0.25 as a result of inhibition of the photoinduced electron transfer (PET) process. By introducing two additional rhodamine moieties at the termini, the resulting conjugate could also detect Hg²⁺ ions in a highly selective manner. Upon excitation at the BODIPY core, the fluorescence emission of rhodamine at 580 nm was observed and the intensity increased substantially upon addition of Hg²⁺ ions due to inhibition of the PET process followed by highly efficient fluorescence resonance energy transfer (FRET) from the BODIPY core to the rhodamine moieties. The Hg²⁺‐responsive fluorescence change of these two probes could be easily seen with the naked eye. The binding stoichiometry between the probes and Hg²⁺ ions in CH₃CN was determined to be 1:2 by Job′s plot analysis and ¹H NMR titration, and the binding constants were found to be (1.2±0.1)×10¹¹ m ^?2 and (1.3±0.3)×10¹⁰ m ^?2, respectively. The overall results suggest that these two BODIPY derivatives can serve as highly selective fluorescent probes for Hg²⁺ ions. The rhodamine derivative makes use of a combined PET‐FRET sensing mechanism which can greatly increase the sensitivity of detection.     

The mercury chromates Hg6Cr2O9 and Hg6Cr2O10—Preparation and crystal structures, and thermal behaviour of Hg6Cr2O9

The basic mercury(I) chromate(VI), Hg₆Cr₂O₉ (=2Hg₂CrO₄·Hg₂O), has been obtained under hydrothermal conditions (200 °C, 5 days) in the form of orange needles as a by-product from reacting elemental mercury and K₂Cr₂O₇. Hydrothermal treatment of microcrystalline Hg₆Cr₂O₉ in demineralised water at 200 °C for 3 days led to crystal growth of red crystals of the basic mercury(I, II) chromate(VI), Hg₆Cr₂O₁₀ (=2Hg₂CrO₄·2HgO). The crystal structures were solved and refined from single crystal X-ray data sets. Hg₆Cr₂O₉: space group P2₁2₁2₁, Z=4, a=7.3573(12), b=8.0336(13), , 3492 structure factors, 109 parameters, R[F²>2σ(F²)]=0.0371, wR(F² all)=0.0517; Hg₆Cr₂O₁₀: space group Pca2₁, Z=4, a=11.4745(15), b=9.4359(12), , 3249 structure factors, 114 parameters, R[F²>2σ(F²)]=0.0398, wR(F² all)=0.0625. Both crystal structures are made up of an intricate mercury-oxygen network, subdivided into single building blocks [O-Hg-Hg-O] for the mercurous compound, and [O-Hg-Hg-O] and [O-Hg-O] for the mixed-valent compound. Hg₆Cr₂O₉ contains three different Hg₂²⁺ dumbbells, whereas Hg₆Cr₂O₁₀ contains two different Hg₂²⁺ dumbbells and two Hg²⁺ cations. The Hg^I-Hg^I distances are characteristic and range between 2.5031(15) and 2.5286(9) Å. All Hg₂²⁺ groups exhibit an unsymmetrical oxygen environment. The oxygen coordination of the Hg²⁺ cations is nearly linear with two tightly bonded O atoms at distances around 2.07 Å. For both structures, the chromate(VI) anions reside in the vacancies of the Hg-O network and deviate only slightly from the ideal tetrahedral geometry with average Cr-O distances of ca. 1.66 Å. Upon heating at temperatures above 385 °C, Hg₆Cr₂O₉ decomposes in a four-step mechanism with Cr₂O₃ as the end-product at temperatures above 620 °C.     

Cytosine triphosphate-capped silver nanoparticles as a platform for visual and colorimetric determination of mercury(II) and chromium(III)

This work reports on a colorimetric platform for determination of chromium ions (Cr³⁺) and mercury ions (Hg²⁺) using silver nanoparticles (AgNPs) capped with cytosine triphosphate (CTP). The capped AgNPs were synthesized one-step by reduction of AgNO₃ in the presence of CTP. It was found that such AgNPs aggregate in the presence of Cr³⁺. This results in a decrease in the intensity of the surface plasmon resonance (SPR) band at 390 nm and the formation of a new red-shifted band at 510 nm, and consequently a color change from yellow to red. Different from the Cr³⁺-induced aggregation of AgNPs, exposure to Hg²⁺ causes the formation of a mercury layer around the surface of the AgNPs. This, in turn, causes the SPR absorption of the AgNPs to decrease and to undergo a slight blue shift, and this results in a fading of the yellow color. The findings are the basis of developing a new method for quantification of either Cr³⁺ or Hg²⁺, with detection limits of 6.25 μM for Cr³⁺ and of 0.125 μM for Hg²⁺, respectively. The method was applied to the determination of the two ions in spiked drinking water and lake water samples, and recoveries ranged from 94.5% to 101.3% for Cr³⁺, and from 96% to 108% for Hg²⁺, which is satisfactory for quantitative assays performed in water samples.

Open image in new window

Graphical abstract Cytosine triphosphate-capped silver nanoparticles (cAgNPs) are shown to represent a viable probe for visual and colorimetric detection of Hg²⁺ and Cr³⁺ via two different mechanisms: aggregation of cAgNPs in case of Cr³⁺; and amalgamation of cAgNPs in case of Hg²⁺.

     

Study on Separation/Enrichment and Determination of Mercury(II) using Microcrystalline Thymolphthalein Loaded with Ternary Association Complex

The paper presents a novel method for the separation/enrichment of Hg²⁺ using microcrystalline thymolphthalein loaded with ternary association complex prior to the determination by spectrophotometry. The effects of different parameters, such as the dosages of KI and dodecyl trimethyl ammonium bromide (DTAB) and thymolphthalein, various salts and acidity etc. on the enrichment yield of Hg²⁺ have been investigated to select the experimental conditions. The results showed that in the presence of 1.0 g NaCl, when the dosage of 0.1 M KI solution was 1.50 mL and 5.0 × 10⁻³ M dodecyl trimethyl ammonium bromide (DTAB) solution was 1.50 mL respectively, the water‐insoluble ternary association complex of (DTAB)₂(HgI₄) which produced by Hg²⁺ and I⁻, DTAB cation (DTAB⁺) was quantificationally absorbed on the surface of microcrystalline thymolphthalein Therefore, Hg²⁺ was separated completely from Zn²⁺, Mn²⁺, Ni²⁺, Co²⁺, Fe³⁺, Al³⁺, Pb²⁺, Bi³⁺ and Cr³⁺ etc. by contolling acidity. The possible enrichment mechanism of Hg²⁺ was deduced. The proposed method has been successfully applied to the determination of Hg²⁺ in the sample of industrial waster water, and the results agreed well with the dithizone method. The recoveries were 94.5%∼106.5%, and the RSD was 2.0%∼2.8%.     

Electrochemical Sensing of Mercury over Cadmium and Lead Cations by the Redox-Active Polyazacycloalkane Ligand 1,1″: 1′,1′′′-Bis[ethane-1,2-diylbis(iminomethylene)]bis[ferrocene]

The coordination behaviour of the redox-active polyazacycloalkane L¹ against the toxic heavy-metal ions Cd²⁺, Pb²⁺, and Hg²⁺ was studied in THF/H₂O 70 : 30 (containing 0.1 mol⋅dm⁻³ of (Bu₄N)ClO₄). The crystal and molecular structure of the cadmium complex [Cd(L¹)(NO₃)₂] ( 1 ) was determined by X-ray single-crystal analysis. The cadmium ion is in a 4+2 surrounding with the ligand L¹ acting as tetradentate and the apical positions occupied by the O-atoms of the nitrate anions. An electrochemical study reveals that L¹ shows a selective electrochemical response against Hg²⁺ over Cd²⁺ and Pb²⁺.     

Differential Pulse Voltammetric Determination and Application of Square‐Wave Voltammetry of yRNA on a CPB‐Cellulose Modified Electrode

Electrochemical behavior of remarkably low levels of Ribonucleic acid yeast (yRNA) is studied through differential pulse voltammetry (DPV), and kinetic parameters of the electrochemical reaction have also been calculated through square‐wave voltammetry (SWV), based on immobilization of yRNA on the surface of a CPB‐cellulose modified electrode. YRNA/ CPB‐cellulose/ITO conductive glass electrode is demonstrated by Infrared reflect (IR) and electrochemical impedance spectroscopy (EIS). The oxidation peak potential of yRNA shifts negatively with increasing pH. The peak currents decrease gradually in successive scans and no corresponding reduction peaks occur, indicating that oxidation process of yRNA is completely irreversible. Variables influencing DPV response of yRNA, such as pH, pulse amplitude and electrolyte concentration, are explored and optimized. Peak currents are proportional to the concentration of yRNA in the range of 0.1 μg mL^?1–1.0 μg mL^?1, and the linear regression coefficient equals 0.9923. The detection limit for yRNA is 1.0×10^?10 g mL^?1. Interferences of L ‐cysteine, L ‐alanine, Hemoglobin, Uridine 5′‐monophosphate, Guanosine 5′‐monophosphate, Adenosine 5′‐triphosphate and some metal ions (Co³⁺, Cr³⁺, Ni²⁺, Hg²⁺, Zn²⁺, etc) are negligible. The methods adopted here are more sensitive and selective than currently applied techniques and overcome the drawback of absorption spectroscopy arising from a strong interference due to other UV‐absorbing substances.     

Preparation of Silver Nanoparticles Reduced by Formamidinesulfinic Acid and Its Application in Colorimetric Sensor

A rapid one-step preparation approach of silver nanoparticles (AgNPs) was reported by employing formamidinesulfinic acid as reducing agent and soluble starch as stabilizing agent. The formation of AgNPs was further confirmed by using UV–Vis absorption spectroscopy, X-ray diffraction spectroscopy and transmission electron microscopy techniques. The resultant AgNPs could be directly used for the colorimetric reaction with metal ions. The results showed that Al³⁺, Cr³⁺, Fe³⁺ and Hg²⁺ ions could induce the color change of AgNPs from yellow to pink (Al³⁺), orange (Cr³⁺) and colorless (Fe³⁺ and Hg²⁺), respectively, which can be observed by the naked eye. Based on these, a sensitive colorimetric sensor for Al³⁺, Fe³⁺, Cr³⁺ and Hg²⁺ ions detection was developed.     

Synthesis and electrochemical sensing behaviour of a new ferrocene functionalized tet ‘a’ macrocyclic receptor towards transition metal ions

A new ferrocene functionalized macrocyclic receptor 1,8‐bis(ferrocenylmethyl)‐5,5,7,12,12,14‐hexamethyl‐1,4,8,11‐tetraazacyclotetradecane (R) has been designed and synthesized to study its potential application as chemosensor. The receptor has been characterized by spectral techniques and X‐ray diffraction. The compound crystallizes in the orthorhombic space group Pcab with four molecules in a unit cell (half‐a‐molecule in the asymmetric unit). The electrochemical studies of the receptor in dioxane–water (7:3 v/v, 25 °C) indicate that the receptor is pH‐dependent with a displacement of E_1/2 to more anodic potentials with a decrease in the pH from 12 to 5. The electrochemical behaviour of R was also studied in the presence of Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ in dioxane–water (7:3 v/v, 25 °C, [Buⁿ₄N][ClO₄]), showing that upon complexation the ferrocene–ferrocenium half‐wave potential shifts anodically in relation to that of the free receptor. The maximum electrochemical shift (ΔE_1/2) of 46 mV was found in the presence of Cu²⁺, followed by Co²⁺ (20 mV), Mn²⁺ (15 mV), Ni²⁺ (13 mV) and Zn²⁺ (9 mV). Moreover, the receptor R is able to electrochemically and selectively sense Cu²⁺ in the presence of the other transition metal cations studied. Copyright © 2007 John Wiley & Sons, Ltd.     

A selective fluorogenic chemodosimeter for Hg based on the dimerization of desulfurized product

A simple Hg²⁺-selective chemodosimetric system based on thiosemicarbazone was investigated. The transformation of thiosemicarbazone into semicarbazone selectively exerted by Hg²⁺ ions and the dimerization of semicarbazone resulted in a pronounced OFF–ON-type fluorescent signaling behavior. The coexistent metal ions, such as Fe³⁺, Ca²⁺, Cu²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺, Mg²⁺, Na⁺, K⁺, and Fe²⁺, had no obvious interference with the detection of Hg²⁺. In addition, S₁₂–Hg²⁺ plays a high sensitivity for basic anions to form an ‘OFF–ON–OFF’ type signaling behavior, with the Hg²⁺-induced emission spectra can be quenched. Moreover, test strips based on S₁₂ exhibited a good selectivity to Hg²⁺. We believe the test strips could act as a convenient and efficient Hg²⁺ test kit.     

A Fluorescent Chemosensor for Al3+ Based on CO Isomerization Derivated from Curcumin

A simple and nontoxic fluorescent chemosensor of di‐O‐methyl curcumin has been prepared from curcumin. The sensor exhibited selective and sensitive fluorescent responses toward Al³⁺ over a wide range of metal ions, such as Mn²⁺, Ce³⁺, Pt²⁺, Sn⁴⁺, Hg⁺, Sb³⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Cu²⁺, Ni²⁺, Na⁺, NH₄⁺, Ag⁺, Pb²⁺, Zn²⁺, Fe²⁺, Fe³⁺, Hg²⁺ and Cr³⁺ in ethanol/water. The free ligand showed quite weak fluorescence emission due to the isomerization of C?O double bond in the excited state, however, after addition of Al³⁺, fluorescence emission results in a prominent fluorescence enhancement.     

Multimodal Use of New Coumarin‐Based Fluorescent Chemosensors: Towards Highly Selective Optical Sensors for Hg2+ Probing

Despite several types of fluorescent sensing molecules have been proposed and examined to signal Hg²⁺ ion binding, the development of fluorescence‐based devices for in‐field Hg²⁺ detection and screening in environmental and industrial samples is still a challenging task. Herein, we report the synthesis and characterization of three new coumarin‐based fluorescent chemosensors featuring mixed thia/aza macrocyclic framework as receptors units, that is, ligands L1 – L3 . These probes revealed an OFF–ON selective response to the presence of Hg²⁺ ions in MeCN/H₂O 4:1 (v/v), which allowed imaging of this metal ion in Cos‐7 cells in vitro. Once included in silica core–polyethylene glycol (PEG) shell nanoparticles or supported on polyvinyl chloride (PVC)‐based polymeric membranes, ligands L1 – L3 can also selectively sense Hg²⁺ ions in pure water. In particular we have developed an optical sensing array tacking advantage of the fluorescent properties of ligand L3 and based on the computer screen photo assisted technique (CSPT). In the device ligand L3 is dispersed into PVC membranes and it quantitatively responds to Hg²⁺ ions in natural water samples.     

Synthesis and Characterization of Nanostructured Fe3O4 Micron‐Spheres and Their Application in Removing Toxic Cr Ions from Polluted Water

We present a simple and effective method for the synthesis of nanostructured Fe₃O₄ micron‐spheres (NFMSs) by annealing hydrothermally formed FeCO₃ spheres in argon. The phase structure, particle size, and magnetic properties of the product have been characterized by X‐ray diffraction (XRD), Fourier‐transform infrared spectroscopy (FTIR), X‐ray photoelectron spectroscopy (XPS), field‐emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and by means of a superconducting quantum interference device (SQUID). The results have shown that the as‐obtained NFMSs have a diameter of about 5 μm and are composed of nanometer‐sized porous lamellae. The NFMSs have a large specific surface area (135.9 m² g^?1), reductive Fe²⁺ incorporated into their structure, and intense magnetic properties. These properties suggest that NFMSs have potential application in removing toxic Cr⁶⁺ ions from polluted water. At 25 °C, each gram of NFMSs product can remove 43.48 mg of Cr⁶⁺ ions, as compared to just 10.2 mg for nanometer‐sized Fe₃O₄ and 1.89 mg for micron‐sized Fe₃O₄. The enhanced removal performance can be ascribed to the structural features. Moreover, the Cr⁶⁺ ion removal capacity of the NFMSs can reach up to 71.2 mg g^?1 at 50 °C. The influencing parameters in the removal of Cr⁶⁺ ions, such as contact time, pH, and temperature, have been evaluated. The Cr⁶⁺‐removal mechanism has been investigated. We have found that the NFMSs product not only serves as an effective adsorbent to remove toxic Cr⁶⁺ ions from polluted water, but also as an effective reductant in reducing the adsorbed toxic Cr⁶⁺ ions to much less toxic Cr³⁺ through the Fe²⁺ incorporated into its structure.