合成甲基叔丁基醚催化剂的研究

本文在查阅了大量有关合成甲基叔丁基醚（ＭＴＢＥ）催化剂资料的基础上，根据所用催化剂的类型进行了分类总结，其名包括离子交换树脂催化剂，分子筛催化剂，杂多酸催化剂等，并对各种催化剂的催化活性进行了比较，探讨了影响催化剂活性的诸因素。     

中科院大连化物所研制成功双氧水加氢催化剂

不久前，由中科院大连化物所能源环境工程组承担的双氧水加氢催化剂项目顺利通过了中石化催化剂分公司组织的评审验收，与会专家对催化剂性能及项目合作工作给予了很高的评价，认为催化剂性能优于现有工业催化剂，建议进行中试实验。据悉，项目组利用非均布催化剂制备技术研制出双氧水生产用蒽醌加氢催化剂DICP-1、DICP-2，经过上百小时的现场模拟实验表明，催化剂性能优良，贵金属负载量为商用工业催化剂的70％，时空收率比商用工业催化剂提高20％以上。     

聚烯烃催化剂的发展及我们的对策

评述了聚烯烃催化剂的几个重要发展阶段，讨论了Ziegler-Natta催化剂，茂金属催化剂及非茂有机金属催化剂的组成及特征，提出了我国在聚烯烃催化剂开发方面的对策。     

Fe/Zn双金属氰化物催化剂催化环氧丙烷聚合的活性结构研究

以氯化锌、铁氰化钾（含有整合剂）的水溶液为原料，合成了铁锌双金属氰化物（DMC）催化剂。为获得高活性的DMC催化剂，需将叔丁醇 、多元醇螯合剂螯合至其结构中，用XRD、XPS等分析手段，对铁锌DMC催化剂的结构与活性进行分析表征。实验发现，DMC催化剂的晶体结构与螯合剂密切相关，螯合剂能显著降低DMC催化剂的结晶程度，从而提高DMC催化剂的活性。同时，氯化锌过量也有利于DMC催化剂活性的提高。并表征了相关DMC催化剂的活性中心。     

Cu-Zr-Ce-O催化剂上CO选择性氧化及再生研究

采用共沉淀法制备了一系列Cu-Zr-Ce-O复合氧化物催化剂，考察了ZrO2加入量、不同再生方法对催化剂CO选择性氧化反应性能的影响，并通过DSC-TPR、XRD和SEM手段对催化剂进行了表征。结果表明，添加ZrO2的Cu1Zr1Ce9Oδ催化剂在160 ℃～200 ℃，具有99％以上的CO转化率，并且催化剂的选择性相对较高。适量ZrO2的加入能够细化催化剂的颗粒，提高催化剂的热稳定性，改变催化剂的聚结方式。经氮气、氢气及氧气再生处理后的Cu1Zr1Ce9Oδ催化剂，催化活性有所不同，其中经氧气处理后的催化剂，表面吸附氧体积分数较高，活性恢复较好。     

铬系乙烯齐聚和聚合催化剂

综述了近年来国内外铬系催化剂的最新研究进展。介绍了该类催化剂齐聚和合的性能研究和应用，讨论了该催化剂长期引起争议的活性中心，活性价态，以及反应机理，并同时预测了铬系催化剂在工业和纳米技术方面的发展趋势。     

Sm2O3对Ni／sepiolite甲烷化催化剂的影响

采用浸渍法制备了Ni/sepiolite及Ni-Sm/sepiolite催化剂并测定了催化剂的CO甲烷化活性，采用抗热实验，XPS及CS2中毒等手段研究了钐对Ni/sepiolite催化剂的影响，结果表明，加入Sm2O3提高了Ni/sepiolite催化剂的甲烷化活性，催化剂热稳定性及抗毒能力，降低了镍原子的电子结合能。     

镍基气凝胶催化CH4-CO2重整制取合成气反应的研究 Ⅲ.影响催化剂积碳性能因素的探讨

考察了823K焙烧的干凝胶xNCA550、气凝胶aNCA550及浸渍型催化剂iNCA550在923K、1073K、1173K反应温度下的积碳行为，对催化剂表面碳的活性及类型进行了分析，并探讨了影响催化剂积碳的因素。实验结果表明，随反应温度的提高，催化剂的积碳能力减弱，尤以气凝胶催化剂aNCA550明显。催化剂的积碳主要发生在反应的初期，反应温度越高，到达积碳量相对稳定期所需要的时间越短；随着反应时间的延续，催化剂积碳量缓慢增长，并且表面碳的活性降低。催化剂的酸性和镍晶粒大小是影响其积碳性能的主要内在因素，而它们对积碳的影响程度受反应温度的影响，反应温度越高，催化剂表达酸性中心利于积碳的作用越小，小晶粒镍抑制催化剂积碳的能力越强。     

新型孔结构渣油催化裂化催化剂

高温短接触FCC工艺和原料的重质化要求FCC催化剂具有大孔，以增加大分子烃在催化剂中的扩散速度，提高催化剂的反应性能。在不改变催化剂组成的前提下，采用聚苯乙烯微球为模板剂在催化剂基质中引入适量的、尺寸可控的大孔；通过SEM、N2吸附等对催化剂的形貌和孔结构进行了表征；以大庆常压渣油为原料，测定了催化剂的反应性能。实验表明，大孔催化剂中孔体积和比表面积随模板剂用量的增加而增加；在模板剂用量相同时，模板剂粒径越小孔体积和比表面积增加越多。模板剂的引入不仅增加了催化剂中的大孔孔体积，使得催化剂中微孔部分的体积和比表面积也有了一定增加。模板颗粒法合成的催化剂，扩散阻力小，重油转化率高，轻油收率高。     

葡辛胺的催化加氢合成工艺的研究

系统地研究了以Ｒａｎｅｙ镍为催化剂同呼正辛胺形成Ｓｃｈｉｆｆ碱后催化加氢合成葡辛胺的反应，通过对反应条件的优化，特别是通过向反应体系中加入催化剂量的三乙胺，改善了催化剂的性能，降低了催化剂的用量，有效地抑制了副反应的发生，缩短了反应时间，反应产率达到７０％以上，并对失活的Ｒａｎｅｙ镍催化剂的再生进行了初步试探。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.