联苯聚醚醚酮酮的合成与性能研究

用亲核取代路线合成了含亚联苯结构的新型聚醚醚酮酮（联苯ＰＥＥＫＫ），并对其基本性能进行了测定。结果表明，联苯ＰＥＥＫＫ的Ｔｍ比聚醚醚酮（ＰＥＥＫ）高７７℃，其Ｔｇ比ＰＥＥＫ的高４１℃，且保持了良好的力学性能，本文还对联苯ＰＥＥＫＫ的晶体结构进行了初步探讨。     

聚醚醚酮酮等温结晶动力学的研究

聚醚醚酮酮等温结晶动力学的研究陈艳，王军佐，曹俊奎，那辉，吴忠文（吉林大学化学系，长春，１３００２３）关键词聚醚醚酮酮，等温结晶动力学，差示扫描量热法聚醚醚酮酮（ＰＥＥＫＫ）是在聚醚醚酮（ＰＥＥＫ）基础上开发成功的一种耐热高分子材料。它保持了ＰＥＥＫ...     

聚醚醚酮酮（PEEKK）和含联苯结构聚醚醚酮酮（PEBEKK）共聚物的SAXS研究

应用一维电子密度相关函数方法，对含不同联苯结构的ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物样品小角Ｘ射线散射（ＳＡＸＳ）去模糊强度分析计算表明：ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物的聚集态结构明显地依赖于共聚物中联苯含量。当联苯含量ｎｂ＝０．３５时，积分不变量Ｑ，长周期Ｌ，平均结晶片层厚ｄ，电子密度差η_ｃ－η_ａ和结晶度Ｗ_（ｃ，ｘ）值为最小，比表面积Ｏ_ｓ为最大。     

聚醚醚酮酮和含联苯聚醚醚酮酮共聚物的熔融热

根据Ｆｌｏｒｙ热力学统计理论和比容－熔融热作国法，由ＤＳＣ结果得到了不同联苯含量的聚醚醚酮酮－含联苯聚醚醚酮酮（ＰＥＥＫＫ－ＰＥＢＥＫＫ）共聚物的熔融热，两种方法获得的结果吻合。在此基础上给出了ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物不同联苯含量的熔点计算表达式。结果还表明，随着联苯含量ｎＢ，的变化，明显改变；当ｎＢ＝０．３５时，ＰＥＥＫＫＰＥＢＥＫＫ共聚物的值最小。     

含间位取代苯基聚醚酮酮的结晶与晶体结构研究

通过差示扫描法（ＤＳＣ）及广角Ｘ 射线衍射（ＷＡＸＤ）技术研究了含间位取代苯基聚醚酮酮（ＰＥＫｍＫ）的结晶行为与晶体结构．Ｘ 射线结果表明，从熔融态及玻璃态结晶时，ＰＥＫｍＫ只有一种晶型，其晶胞参数为：ａ＝０７６７２ｎｍ，ｂ＝０６１４９ｎｍ，ｃ＝１５９９ｎｍ．ＤＳＣ结果表明，ＰＥＫｍＫ热分析曲线都出现了熔融双峰，低熔融峰（ＤＯＷｎ）热焓占总热焓４～７％，它源于初始结晶形成的同一晶型不同厚度片晶．低熔融峰在２５０℃以上结晶转化成高熔融峰（Ｉ），ＰＥＫｍＫ平衡熔点为２９５℃     

刚性链嵌段共聚物的研究（Ⅳ）—聚醚醚酮／苯酞圈型聚芳醚砜…

以聚醚醚酮（ＰＥＥＫ）和苯酞圈型聚芳醚砜（ＰＤＣ）齐聚物为原料，通过溶液缩聚法制备了ＰＥＥＫ／ＰＤＣ有规嵌段共聚物系列样品。经ＤＳＣ、ＷＡＸＤ、ＴＧＡ、ＤＭＡ等方法研究表明：共聚物没有微相分离现象；其结晶属于简单正交晶系，ＰＤＣ含量对共聚物结晶行为产生很大影响；热稳定性随ＰＤＣ含量增加而明显降低；共聚物具有优异的力学性能，拉伸强度和储能模量高于ＰＥＥＫ。     

刚性链嵌段共聚物的研究（Ⅳ）──聚醚醚酮／苯酞圈型聚芳醚砜有规嵌段共聚物的合成与部分性能

以聚醚醚酮（ＰＥＥＫ）和苯酞圈型聚芳醚砜（ＰＤＣ）齐聚物为原料，通过溶液缩聚法制备了ＰＥＥＫ／ＰＤＣ有规嵌段共聚物系列样品。经ＤＳＣ、ＷＡＸＤ、ＴＧＡ、ＤＭＡ等方法研究表明：共聚物没有微相分离现象；其结晶属于简单正交晶系，ＰＤＣ含量对共聚物结晶行为产生很大影响；热稳定性随ＰＤＣ含量增加而明显降低；共聚物具有优异的力学性能，拉伸强度和储能模量高于ＰＥＥＫ。     

二苯醚—对苯二甲酰氯—4,4‘—二苯氧基二苯砜三元共聚物的合成与性能

以无水ＡｌＣｌ３／ＣｌＣＨ２ＣＨ２Ｃｌ／ＮＭＰ为催化剂／溶剂体系，通过缩聚反应，由二苯醚，对苯二甲酰氯和４，４－二苯氧基二苯砜合成了聚醚酮酮和聚醚砜醚酮酮共聚物（ＰＥＫＫ／ＰＥＳＥＫＫ）．考察了单体浓度、反应时间对聚合物分子量的影响，并对其进行了ＩＲ、ＤＳＣ、ＷＡＸＤ等分析表征．结果表明，共聚物具有优异的耐热性，随着共聚物中ＰＥＳＥＫＫ单元含量的增加，其玻璃化温度逐渐升高，而熔融温度和结晶度逐渐降低．与聚醚酮酮（ＰＥＫＫ）相比，共聚物的断裂伸长率明显提高，而拉伸强度和拉伸模量却有所下降，但仍具有良好的力学性能．     

芳香聚醚酮酮晶体结构及其晶型变化的研究（Ⅰ）

利用Ｘ射线及热分析技术研究了聚醚酮酮（ＰＥＫＫ）的溶剂诱导结晶及从玻璃态结晶和从熔融态结晶的行为。发现ＰＥＫＫ有两种晶型结构（Ⅰ和Ⅱ），晶型Ⅱ的形成与热历史和溶剂诱导有关，其熔点始终低于Ⅰ型１０℃左右。ＰＥＫＫ的低温熔融峰与其分子链极化有关，而与热历史无关，此低温熔融峰热焓占总热焓２％～１０％，其平衡熔点为４０９℃。     

可固化环氧封端聚芳醚酮加工过程的模型化研究

以可固化环氧热塑性材料———环氧封端聚芳醚酮（Ｅ ＰＥＫ）为研究对象，采用模型化的方法，对其进行了物理性能 化学结构 加工技术一体的综合研究．建立了描述Ｅ ＰＥＫ反应加工过程的系列模型．以此为基础，借助计算机确定了加工参数．用纤维增强复合材料验证了所建立的加工模型和所确定的加工参数的可靠性．结果表明，采用作者所建立的方法，仅需很少的实验，就可完成对加工过程各影响因素的预测分析和加工参数的优化     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.