Preparation of poly(methyl methacrylate) films containing silica particle array structure from colloidal crystals

The incorporation of monodisperse, polymer-modified silica into poly(methyl metharylate) to prepare polymer films containing particle array structure was investigated. The preparation was carried out by a two-step radical polymerization for gelation and solidification. The colloidal crystallization of poly(methyl metharylate)-modified silica, in 78 nm size, in acetonitrile and successive copolymerization of methyl methacrylate and 1,2-dimethacryloylethane by UV light irradiation gave the polymer gel containing the colloidal crystal structure. The exchange of acetonitrile in the gel with methyl methacrylate and further photo-radical polymerization gave the durable polymer film composed of silica particle array.     

Effects of particle volume fraction on distortion of particle-arrayed structure during immobilization of colloidal crystals formed by poly(methyl methacrylate)-grafted silica in acetonitrile

Changes of particle array structure with particle volume fraction during immobilization of colloidal crystals, formed by poly(methyl methacrylate)-grafted silica in acetonitrile, were investigated. Immobilization of colloidal crystals formed in acetonitrile was carried out by two-step photo-radical copolymerization of methyl methacrylate and ethylene dimethacrylate to make organogel, followed by solidification after exchanging the solvent with methyl methacrylate. Crystallite size in colloidal crystals formed in acetonitrile was mostly unchanged with particle volume fraction in the range of 0.11–0.18, while the size and number of single crystals decreased during gelation. Disordering in particle array in immobilized colloidal crystals in gel and poly(methyl methacrylate) matrix was observed to decrease with increasing particle volume fraction less than 0.18 due to strong electrostatic repulsion between particles.     

无皂乳液聚合法制备P(St-MMA-SPMAP)单分散乳胶颗粒

利用无皂乳液聚合 ,分别用一步法和两步法合成了单分散的聚 (苯乙烯 甲基丙烯酸甲酯 甲基丙烯酸丙基磺酸钾 ) (P(St MMA SPMAP) )乳胶颗粒 .在该聚合体系中 ,当水溶性磺酸基单体SPMAP的浓度小于 17mmol L时 ,为均相成核过程 ,能制备单分散的乳胶颗粒 .其中 ,用两步法制备的乳胶颗粒相互之间无粘连 .此外 ,还对一步法合成苯乙烯 甲基丙烯酸甲酯 甲基丙烯酸辛基磺酸钠 (P(St MMA SOMAS) )乳胶颗粒进行了初步研究 .     

Simultaneous ROMP and ATRP in Aqueous Dispersed Media: A Straightforward Strategy to Prepare Polymer Composite Particles with Original Morphologies

Summary: The simultaneous ring-opening metathesis polymerization of norbornene and atom-transfer radical polymerization of methyl methacrylate is used as a convenient tool to prepare polymer composite particles in a single step and using a single catalyst. The current article reviews the use of miniemulsion and microemulsion conditions to reach this goal. The two developed approaches are assessed on chemical and colloidal levels and the prepared composite particles are scrutinized from a morphological point of view.     

Copper‐mediated radical polymerization on a microcellular monolith surface

High‐capacity microcellular monoliths were prepared by a two‐step process, including the synthesis of a bromoester‐functionalized scaffold by the copolymerization of a highly concentrated emulsion and an in situ surface polymerization of methyl methacrylate with atom transfer radical polymerization. The influence of various parameters, such as the feed ratio, the concentration of immobilized bromoester groups, and the presence of a spacer group on the poly(methyl methacrylate) loading, was studied. Monoliths with capacities of up to 7 mmol g^?1 were obtained. Thermogravimetric analyses, scanning electron microscopy experiments, and mercury intrusion porosimetry measurements were used for the characterization of the final materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1216–1226, 2004     

Facile surface immobilization of ATRP initiators on colloidal polymers for grafting brushes and application to colloidal crystals

Bromo-initiators for atom transfer radical polymerization (ATRP) were successfully immobilized on the surfaces of cross-linked poly(methyl methacrylate) (PMMA) spheres by soap-free emulsion polymerization using CBr(4) as the chain transfer agent. Subsequent surface-initiated ATRP (SI-ATRP) afforded a layer of PMMA brushes covalently attached to the sphere surfaces. Colloidal crystal films of these monodisperse spheres were then studied to identify the relationship between variation in particle diameter and the optical properties. The particle diameters were controlled by varying the feed monomer proportions in soap-free emulsion polymerization and the thickness of the grafted brush layer. It was found that the particle diameter could successfully be controlled to obtain crystal films that produce a variety of brilliant colors in the visible region. The results of this study can provide useful information for facile preparation of surface-immobilized ATRP initiators on colloidal polymers and can be employed for grafting polymer brushes.     

Effects of stretching on microstructures of polymer-immobilized non-close-packed colloidal crystalline array

Non-close-packed silica colloidal crystalline array was immobilized by polymer, and effects of stretching on the change of the optical properties and microstructure of the colloidal crystalline arrays have been demonstrated. The immobilization was a two-step polymerization process: the first step was with hydrophilic polyethylene glycol acrylate (PEGA) polymer gel, and the second step was with 2-hydroxyethyl acrylate polymer matrix. The structure of the three-dimensional array was maintained during the immobilizing process with lock in periodic order. The peak wavelength of Bragg diffraction of the polymer-immobilized colloidal crystalline array shifted to shorter wavelength with stretching. The peak shift was caused by the compression of the polymer proportional to the stretching ratio, and the compression was homogeneous throughout the polymer-immobilized colloidal crystalline arrays. These results show that by using polymer-immobilized non-close-packed colloidal crystalline array, mechanically tunable photonic crystals can be realized, and they open the possibility of tuning the microstructure of colloidal crystalline array for photonic crystal.     

Chemo-enzymatic synthesis of comb polymers

The paper describes the synthesis and characterization of comb polymers by a two-step chemo-enzymatic process. In the first step macromonomers bearing unsaturation at the chain end were prepared by lipase catalyzed ring-opening polymerization (ROP) of ε-caprolactone (CL) and 1,5-dioxepane-2-one (DXO). The ROP was carried out in bulk at 60 °C under anhydrous conditions using 2-hydroxyethyl methacrylate (HEMA) as the initiator. The DP of the macromonomers was controlled by regulating the monomer: HEMA molar feed concentration. The macromonomers were then homo- or co-polymerized in the second step with alkyl methacrylate monomers (methyl methacrylate or HEMA) using AIBN initiated free radical polymerization. Characterization of the polymers was done by ¹H NMR, SEC and DSC techniques.     

Surface-initiated living radical polymerization from silica particles functionalized with poly(ethylene glycol)-carrying initiator

A novel yet versatile approach is described for surface-initiated living radical polymerization (SI-LRP) from silica particles (SiPs). Monodisperse SiPs were surface-modified with a newly designed surface-fixable initiator (BPEGE) having three components: a triethoxysilane moiety, a poly(ethylene glycol) (PEG) unit, and an initiation site for atom transfer radical polymerization (ATRP) in the form of a 2-bromoisobutyryl group. The surface-initiated ATRP of methyl methacrylate (MMA) mediated by a copper complex was carried out with the BPEGE-fixed SiPs. The polymerization proceeded in a living manner, producing SiPs coated with well-defined poly(MMA) of a target molecular weight with a graft density as high as 0.5 chains/nm². Thanks to the amphiphilic property of PEG, the system was successfully applied for SI-ATRP of PEG methacrylate and sodium p-styrenesulfonate in aqueous media in which the BPEGE-fixed SiPs were highly dispersed without causing any aggregations. The formation of colloidal crystals with the polymer brush-afforded SiPs demonstrated the high uniformity and perfect dispersibility of the hybrid particles.     

Formation of colloid crystals from polymer-modified monodisperse colloidal silica in organic solvents

The formation of colloid crystals from monodisperse and polymer-modified silica particles in organic solvents was investigated. Maleic anhydride–styrene copolymer-modified silica formed crystals in polar organic solvents, which dissolve the copolymer, while the original colloidal silica formed crystals in organic solvents which were miscible with water. The critical volume fraction in the crystal formation of the polymer-modified silica was lower than that from the unmodified silica in the same solvent. Polystyrene- and poly(methyl methacrylate)-modified silica particles also crystallized in organic solvents, but the features of the formation were different from those of poly(maleic anhydride-styrene)-modified particles. Received: 19 September 1998 Accepted in revised form: 1 January 1999     

Thermal properties of poly(methyl methacrylate) prepared by emulsifier-free emulsion polymerization

Emulsifier-free emulsion polymerization of methyl methacrylate in the presence of potassium persulfate initiator, taken in several different concentrations, at various pH values was studied with the aim to obtain colloidal crystals. The thermal properties of poly(methyl methacrylate) prepared by emulsifier-free emulsion polymerization, as the starting material for fabrication of photonic crystals, were examined in relation to the synthesis conditions.     

Emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate and methyl methacrylate

The emulsion atom transfer radical block copolymerization of 2‐ethylhexyl methacrylate (EHMA) and methyl methacrylate (MMA) was carried out with the bifunctional initiator 1,4‐butylene glycol di(2‐bromoisobutyrate). The system was mediated by copper bromide/4,4′‐dinonyl‐2,2′‐bipyridyl and stabilized by polyoxyethylene sorbitan monooleate. The effects of the initiator concentration and temperature profile on the polymerization kinetics and latex stability were systematically examined. Both EHMA homopolymerization and successive copolymerization with MMA proceeded in a living manner and gave good control over the polymer molecular weights. The polymer molecular weights increased linearly with the monomer conversion with polydispersities lower than 1.2. A low‐temperature prepolymerization step was found to be helpful in stabilizing the latex systems, whereas further polymerization at an elevated temperature ensured high conversion rates. The EHMA polymers were effective as macroinitiators for initiating the block polymerization of MMA. Triblock poly(methyl methacrylate–2‐ethylhexyl methacrylate–methyl methacrylate) samples with various block lengths were synthesized. The MMA and EHMA reactivity ratios determined by a nonlinear least‐square method were ～0.903 and ～0.930, respectively, at 70 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1914–1925, 2006     

星型两亲性聚己内酯-b-聚甲基丙烯酸(2-羟乙酯)嵌段共聚物的合成和表征

通过开环聚合(ROP)和原子转移自由基聚合(ATRP)制备了一类新型的两亲性嵌段共聚物——六臂星形聚(ε-已内酯)-b-聚甲基丙烯酸(2-羟乙酯)(6sPCL-b-PHEMA).6sPCL-b-PHEMA通过三步反应合成:(1)双季戊四醇开环聚合ε-己内酯的合成6sPCL;(2)以2-溴异丁基酰溴封端星形聚合物制备大分...     

Colloidal crystals formed by aqueous suspensions of monodispersed silica, polystyrene, and poly(methyl methacrylate) colloidal spheres

Colloidal crystals consisted of silica, polystyrene, and poly(methyl methacrylate) monodispersed suspensions; deionized sufficiently in water at the same condition; were formed; and their properties were compared changing sphere diameter and volume fraction systematically. The size of these colloidal crystals was maximized at their critical sphere concentration irrespective of their sphere size. The Bragg peak wavelengths of these colloidal crystals were uniquely determined only by the sphere diameter and volume fraction for all kinds of colloidal spheres used in this work. The larger the sphere volume fraction, the larger the crystal growth rates, and there were no significant differences among the colloidal spheres. The rigidity of colloidal crystals increased in proportion to the number density of spheres. Consequently, the crystallization mechanism and properties of colloidal crystals formed by these spheres are not dependent on the kind of spheres, but they are dependent only on the sphere diameter and number density.     

Immobilized copper catalyst for atom transfer radical addition and polymerization

A novel multidentate amine grafted on silica gel and magnetic microsphere was prepared. Its chemical structure was confirmed by C¹³ NMR, XPS and FTIR, and the nitrogen content was determined by elemental analysis. It was also used as a ligand for CuCl and successfully catalyzed the atom transfer radical addition of both carbon tetrachloride (CCl₄) to methyl methacrylate and methyl trichloroacetate to styrene, repeatedly. The conversion and purity of the product were determined through gas chromatography and ¹H NMR, respectively. The immobilized copper catalyst complex was also used in atom transfer radical polymerization of styrene initiated by 1,1,1,3‐tetrachloro‐3‐phenylpropane and methyl methacrylate initiated by methyl 2‐methyl‐2,4,4,4‐tetrachlorobutyrate, respectively. Although the polymerization took place successfully, it did not proceed in a controlled fashion. Copyright © 2010 John Wiley & Sons, Ltd.     

纳米SiO_2粒子锚固偶氮引发剂及接枝聚甲基丙烯酸甲酯

对纳米SiO2 粒子锚固偶氮引发剂 ,进而引发甲基丙烯酸甲酯聚合而制备聚甲基丙烯酸甲酯(PMMA) 纳米SiO2 复合粒子进行了研究 .纳米SiO2 先用环氧型硅烷偶联剂处理 ,再与偶氮二氰基戊酸发生缩合反应而锚固上偶氮引发剂 ,通过差示扫描量热和元素分析证明了引发剂在纳米SiO2 表面的锚固 .通过改性纳米SiO2 存在下MMA的乳液聚合 ,制备得到了接枝率为 2 3 2 %、接枝效率为 36 1%的PMMA 纳米SiO2 复合粒子 .经乳液聚合后 ,纳米SiO2 粒子团聚程度减小 ,在水相中分散稳定 .     

带电悬浮粒子胶体晶体的固定化

采用光固化技术, 以丙烯酰胺单体与亚甲基双丙烯酰胺交联剂在紫外光的照射下发生光聚合反应, 嵌入聚苯乙烯胶体晶体, 实现了胶体晶体的固定化. 结合反射光谱和Kossel衍射技术研究对照了固定化前后胶体晶体的变化, 实验结果表明, 通过这种水凝胶固定化的胶体晶体保存了未固定前悬浮液中胶体晶体的结构. 但固定化后的胶体晶体的晶面间距和晶体的尺寸都略微减小. 通过对固定化后的水凝胶长时间的反射光谱观测, 发现固定化后胶体晶体在Milli-Q水中起初会发生溶胀, 经过2-5天溶胀-消溶胀过程达到平衡, 平衡后的水凝胶胶体晶体十分稳定, 可以长时间保持胶体晶体的结构. 因此, 胶体晶体固定化不但极大地提高了悬浮液中胶体晶体的抗剪切能力, 还克服了悬浮液中胶体晶体对离子、外界干扰的敏感性, 扩大了胶体晶体的实际应用价值.     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-graft-POLYSTYRENE BY ATOM TRANSFER RADICAL POLYMERIZATION

The radical copolymerization of methyl methacrylate and 2-hydroxyethyl methacrylate was carried out via atomtransfer radical polymerization (ATRP) initiated by ethyl 2-bromoisobutyrate and catalyzed by CuBr/2,2'-bipyridinecomplex. This polymerization proceeds in a living fashion with controlled molecular weight and low polydispersity. Theobtained copolymer was esterified with 2-bromoisobutylryl bromide yielding a macroinitiator, poly(methyl methacrylate-co-2-hydroxyethyl methacrylate-co-2-(2-bromoisobutyryloxy)ethyl methacrylate), and its structure was characterized by ~1H-NMR. This macroinitiator was used for ATRP of styrene to synthesize poly(methyl methacrylate)-graft-polystyrene. Themolecular weight of graft copolymer increased with the monomer conversion, and the polydispersity remained relatively low.The individual grafted polystyrene chains were cleaved from the macroinitiator backbone by hydrolysis and the hydrolyzed product was characterized by ~1H-NMR and GPC.     

Branched poly(methyl methacrylates) modified by C60 fullerenes

The poly(methyl methacrylates) of branched structure with a covalently bonded fullerene were synthesized by three-dimensional radical polymerization of methyl methacrylate with triethylene glycol dimethacrylate or allyl methacrylate in toluene containing C₆₀. The kinetics of copolymerization of methyl methacrylate with multifunctional co-monomers in the absence of fullerene is compared with that in its presence. The physicochemical characteristics and thermal stability of the obtained copolymers are also compared. The electron spin resonance (ESR) method was applied to study the kinetics of accumulation of the fullerene radicals in the course of the (co)polymerization of methyl methacrylate.     

乙烯基单体与含氮氧稳定自由基单体的原子转移自由基共聚合研究

通过苯乙烯或甲基丙烯酸甲酯与含氮氧稳定自由基的单体进行原子转移自由基共聚合 ,研究了共聚合反应的条件及动力学 ,成功地合成出侧链含TEMPO基团的氮氧稳定自由基聚合大分子引发剂 .大分子引发剂的结构通过核磁共振谱图进行确证 ,并对共聚合反应的历程进行了探讨