基于聚亚甲基蓝和碳纳米管/辣根过氧化物酶的有机过氧化物传感器

本文结合层层组装法和电化学聚合法,制备了电子介体聚亚甲基蓝(PMB)修饰的碳纳米管(CNTs)/辣根过氧化物酶(HRP)多层膜有机过氧化物传感器。利用电化学阻抗表征了(CNTs/HRP)n的层层组装过程,探讨了不同HRP层数对传感器响应的影响,并研究了传感器对有机过氧化物过氧化氢叔丁基、过氧化氢异丙基苯的电催化还原性能。该传感器对过氧化氢叔丁基的线性检测范围为1.75×10-5～7.25×10-3mol/L,检测限为1.36×10-6 mol/L;对过氧化氢异丙基苯的线性检测范围为3.87×10-6～1.47×10-3 mol/L,检测限为6.48×10-7 mol/L。     

一步电沉积法构建辣根过氧化物酶传感器

在恒电位沉积钴铝水滑石(CoAl-LDH)时将辣根过氧化物酶(HRP)和碳纳米管(CNTs)固定于基底电极表面,构建CoAl-LDH-HRP-CNTs修饰电极并用于过氧化氢的检测。 利用SEM对电化学沉积的CoAl-LDH-HRP-CNTs的形貌进行了表征。 采用电化学阻抗对所制备的电极进行了表征。 用循环伏安法对电极的电化学行为进行了研究。 探讨了pH值和测定电位对修饰电极的催化还原性能的影响。 该传感器对过氧化氢的检测在2.5×10^-6~3.35×10^-4 mol/L范围内呈良好的线性关系,灵敏度为0.0049 A·L/mol。     

基于胆碱修饰层为基底的纳米金固定过氧化物酶修饰电极的研究

玻碳电极上共价修饰上单分子层胆碱(Ch)可以显著提高电极的活性。本研究利用该电极上胆碱层带有的正电荷,牢固吸附带负电荷的纳米金溶胶,继而利用纳米金颗粒良好固载辣根过氧化物酶(HRP),制备出了基于HRP酶直接电化学的H2O2传感器。以阻抗谱、循环伏安等方法表征了修饰电极的性质。结果显示,该电化学传感器具有良好的催化活性,电活性HRP的表面浓度(Γ*)为1.2×10-9mol/cm2,米氏常数KMapp=1.55±0.11 mmol/L。该修饰电极在H2O2浓度1.2×10-6~3.2×10-3mol/L范围内有线性响应,检出限(S/N=3)为4.0×10-7mol/L。本修饰电极制备简单,选择性高,稳定性好,可以作为进一步构筑生物传感器的基础。     

基于石墨烯基复合物和聚天青Ⅰ的HRP传感器检测有机过氧化物的研究

利用电化学还原氧化石墨烯(GO)的方法将石墨烯(rGO)固定在电极表面上,然后电沉积氢氧化铜和氢氧化镍复合物,构成石墨烯/金属氢氧化物复合纳米材料修饰的玻碳电极(GCE),并通过电聚合天青Ⅰ将辣根过氧化酶(HRP)固定在GCE/rGO/Cu(OH)_2-Ni(OH)_2表面,制得GCE/rGO/Cu(OH)_2-Ni(OH)_2/HRP-PA。对石墨烯/金属氢氧化物复合纳米材料进行了SEM和能谱表征。通过电化学阻抗法和循环伏安法对传感器的制备过程和电化学性能进行了研究,并进一步分别对过氧化氢叔丁基(BHP)及过氧化氢异丙苯(CHP)进行了分析测定。该传感器对BHP和CHP具有良好的检测效果,在2.0×10~(-5)~9.2×10~(-4)mol/L范围内响应电流与BHP浓度呈良好的线性关系,检出限为9.9×10~(-6)mol/L;在3.0×10~(-6)~1.0×10~(-4)mol/L范围内响应电流与CHP浓度呈良好的线性关系,检出限为6.9×10~(-7)mol/L。     

电聚合茜素黄R构建辣根过氧化物酶传感器的研究

利用电聚合茜素黄R(AYR)的方法,将辣根过氧化物酶(HRP)和细胞色素c(Cyt c)固载于通过一步法电沉积的碳纳米管-金纳米粒子(MWCNTsAu NPs)复合纳米材料修饰电极表面,构筑PAYR-HRP-Cyt c/M WCNTs-Au NPs修饰电极,并利用HRP对H2O2的直接电化学催化行为对H2O2进行检测。采用扫描电镜对MWCNTs-Au NPs和PAYR-HRP-Cyt c的表面形貌进行表征。利用电化学阻抗对修饰电极的构筑过程进行了监测。采用循环伏安法和计时电流法对修饰电极的电化学行为进行了研究。探讨了p H和电位对该修饰电极测定H2O2的性能的影响。该传感器对H2O2在5.0×10-7~3.14×10-3mol/L范围内呈良好的线性响应,相关系数为0.9997,灵敏度为0.50 A·L/mol,检出限(S/N=3)为9.6×10-8mol/L。     

辣根过氧化物酶在碳纳米管-离子液体修饰碳糊电极上的直接电化学研究

以室温离子液体1-丁基-3-甲基咪唑六氟磷酸盐([EMIM]PF6)为粘合剂与多壁碳纳米管(Multi-walled carbon nanotubes,MWCNTs)、石墨粉相混合制备新型碳糊电极,并在该电极表面修饰辣根过氧化物酶(HRP)制成新型碳糊酶电极(HRP-MWCNTs-CILE)。应用循环伏安法(CV)和计时电流法(it)研究了该修饰电极的直接电化学行为。结果表明,该修饰电极在pH 6.0的0.05 mol/L磷酸缓冲溶液中,其循环伏安曲线上出现了1对准可逆的氧化还原峰,为HRP中Fe(Ⅲ)/Fe(Ⅱ)电对的特征峰。该修饰电极对过氧化氢具有良好的催化活性、抗干扰能力和稳定性。在最佳条件下,修饰电极对H2O2的测定线性范围为7.0×10-6~3.0×10-3mol/L,检出限(S/N=3)为2.5×10-6mol/L。该传感器具有制备简单、成本低廉、响应快等特点,具有较好的应用前景。     

HRP-纳米金/纳米硫化镉/聚天青Ⅰ修饰玻碳电极的制备及用作过氧化氢生物传感器

以玻碳电极为基底,电聚合一层表面均匀的带正电性的聚天青Ⅰ膜,再通过静电作用吸附一层带负电性的具有大比表面积的纳米硫化镉来固定纳米金和辣根过氧化物酶(HRP)的复合物,制备出性能良好的过氧化氢生物传感器.采用循环伏安法(CV)和计时电流法对该生物传感器的性能进行了研究.试验表明:该方法不仅增加了酶的吸附量,还有效保持了酶的生物催化活性,此生物传感器对过氧化氢浓度在4.0×10-7～1.2×10-3mol·L-1范围内呈线性关系,检出限为1.4×10-7mol·L-1.     

固定化辣根过氧化物酶和硫堇的过氧化物传感器

利用卡拉胶水凝胶将辣根过氧化物酶和硫堇同时固定在玻碳电极表面,制备以硫堇为媒介体的过氧化物电化学传感器.包埋在卡拉胶水凝胶中的硫堇在pH=7.0的磷酸缓冲溶液中出现了1对氧化还原峰,氧化峰电位和还原峰电位分别在-0.176和-0.264 V,电位差为88 mV,电流比近似为1,说明硫堇在电极表面发生准可逆的电化学反应.硫堇能作为辣根过氧化物酶催化还原过氧化物中的电子媒介体,加速催化还原过程中的电子传递,减少了催化还原过程中的其它氧化物的干扰.传感器检测过氧化物(过氧化氢、异丙苯基过氧化氢、过氧化丁酮、叔丁基过氧化氢)具有较快的响应时间和良好的灵敏度、重现性、稳定性及较长的使用寿命.     

基于石墨烯-壳聚糖-辣根过氧化物酶的H2O2生物传感器的研制

制备了石墨烯-壳聚糖(GR-CS)纳米复合材料,并将之与辣根过氧化物酶(HRP)混合,构建了基于石墨烯-壳聚糖-辣根过氧化物酶的生物传感器(GR-CS-HRP/GC)。探针及循环伏安研究表明,该界面具有优异的电子传导能力、较大的比表面积和良好的生物相容性,对H2O2的还原显示出较好的电催化活性,在工作电位为-0.2 V,0.05 mol/L的磷酸盐缓冲盐溶液(PBS,pH 6.8)中,该酶传感器对过氧化氢响应灵敏度高,检测范围宽,测定H2O2的线性范围为5.0×10-7～2×10-3mol/L(相关系数为0.998)。检出限为2.0×10-7mol/L(S/N=3)。并且表现出良好的稳定性和高选择性。该电极用于实际样品中H2O2的测定,结果令人满意。     

基于层层静电吸附天青Ⅰ和纳米金固定过氧化物酶生物传感器的研究

在玻碳电极(GCE)上,构造了一种以对氨基苯磺酸电聚合膜(PABSA)为基底,利用层层静电自组装技术固定多层天青Ⅰ(AI)和纳米金(nano-Au)制备的复合薄膜(nano-Au/AI)n,然后通过静电吸附辣根过氧化物酶(HRP)制得过氧化氢生物传感器[HRP/(nano-Au/AI)n/PABSA/GCE].采用循环伏安法和计时电流法考察了该传感器的电化学性质,并且研究了该修饰电极对H2O2的催化还原作用.在优化的实验条件下,该传感器的响应电流与其浓度在3.5×10-6～3.6×10-3 mol/L范围内呈现良好的线性关系,检出限为1.2×10-6 mol/L.该传感器的米氏常数为1.5 mmol/L,表明所固定的酶具有较高的生物活性.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.