微波加热法水相合成梯度合金CdSeS量子点及其环境暴露下荧光稳定性研究

采用微波辅助加热法在水相中一步合成了梯度合金CdSeS量子点,荧光光谱和紫外吸收光谱表明,合成的CdSeS合金量子点具有较高的量子产率(30%左右)。X射线衍射分析和光电子能谱表征证明,合成的CdSeS量子点具有立方晶型,梯度合金结构,内部以CdSe为主,而外部主要以CdS为主;电子透射显微镜下观察到的量子点结晶度高,粒径小(仅2~3 nm),粒度分布均一。在此基础上探讨了所合成的合金量子点在氧化剂过氧化氢、不同的酸碱介质中及350 W氙灯的作用下其荧光光谱的稳定性。结果表明,该合金量子点的光稳定性与CdTe QDs相当,但具有更好的抗氧化性能和抗酸刻蚀性能,具有良好的应用前景。     

CdS量子点的一步法合成及量子产率

以油酸为配体,十八烯为溶剂,采用一步法合成了CdS量子点,研究了反应温度、反应时间和Cd/S的摩尔比对量子点光谱性能的影响.X射线衍射(XRD)和高分辨透射电镜(HRTEM)测试结果表明,所获得的CdS量子点为立方闪锌矿结构,且尺寸分布均一,结晶度高,其较强的带边发光、尖锐的紫外吸收峰以及狭窄的荧光发射峰进一步表明量子...     

CdTe量子点在液体石蜡体系的制备

选用液体石蜡作为高温反应溶剂, 油酸和TOP(三正辛基膦)分别作为镉源和碲源的溶剂兼配体, 利用高温热解法一步合成了高质量的CdTe量子点. 借助紫外-可见吸收光谱、荧光发射光谱、透射电子显微镜及X射线粉末衍射等分析手段对产物的性能进行表征. 结果表明, 反应的温度、反应时间、溶液的浓度、配体的数量均对量子点的生长过程和光学性质有明显影响. 利用这种方法制得的CdTe量子点均为立方闪锌矿结构, 粒径范围为3~7 nm, 最大发射波长在570~720 nm范围内连续可调, 荧光量子产率最高达到65%, 并且具有良好的热稳定性.     

CH2XH→CH3X (X＝O, S, Se)异构化的量子拓扑研究

利用从头算和量子拓扑方法讨论了CH₂XH→CH₃X (X＝O, S, Se)异构化过程的反应机理. 着重从电子密度拓扑分析计算了反应进程中的各点, 讨论了反应进程中键的断裂和生成, 上述反应都经历了三元环过渡结构, 找到了这类反应的"能量过渡态"和"结构过渡态", 且结构过渡态均在能量过渡态之后出现. 三元结构过渡态结构出现的范围与反应热成正比.     

CH2XH→CH3X (X＝O, S, Se)异构化的量子拓扑研究

利用从头算和量子拓扑方法讨论了CH₂XH→CH₃X (X＝O, S, Se)异构化过程的反应机理. 着重从电子密度拓扑分析计算了反应进程中的各点, 讨论了反应进程中键的断裂和生成, 上述反应都经历了三元环过渡结构, 找到了这类反应的"能量过渡态"和"结构过渡态", 且结构过渡态均在能量过渡态之后出现. 三元结构过渡态结构出现的范围与反应热成正比.     

以油胺-硒化氢复合物为前体的脂溶性量子点的制备

报道了一种以油胺-硒化氢复合物为前体的脂溶性CdSe量子点的制备方法. 将新制备的H2Se气体通入到油胺中, 得到油胺-硒化氢复合物, 以此复合物作为前体, 采用溶剂热合成法制备了CdSe量子点, 并采用荧光光谱、电镜以及X射线衍射对其进行了表征. 结果表明, CdSe量子点为立方晶型, 荧光半峰宽较窄(25~40 nm), 荧光量子产率可达23%, 并且荧光发射光谱从480到610 nm连续可调. 该方法无须使用三烷基膦, 是一种价廉环保的量子点制备方法.     

纳米晶AgLa3Se5的合成及光催化特性

以乙二胺为溶剂,AgNO3,La(NO3)3·6H2O和Se粉为原料,采用微波溶剂热法合成纳米晶AgLa3Se5.通过X射线粉末衍射(XRD)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段表征了其组成.结果表明产物为纳米晶颗粒,平均粒度25 nm.以AgLa3Se5为光催化剂,对甲基橙溶液进行光催化降解,讨论了反应条件对光降解率的影响,表明纳米晶AgLa3Se5具有良好的光催化效果,可重复使用.     

谷胱甘肽稳定水溶性CdTe/ZnTe量子点的制备与表征

用还原型谷胱甘肽(GSH)作为稳定剂, 合成了水溶性的CdTe/ZnTe核壳结构的半导体量子点. 考察了Zn/Cd反应物配比及GSH用量对CdTe/ZnTe量子点的性能影响. 用高分辨透射电子显微镜(HRTEM)和X射线粉末衍射(XRD)光谱对CdTe和CdTe/ZnTe的形貌和晶体结构进行了表征. 荧光光谱结果表明, 核壳结构的CdTe/ZnTe量子点比单一的CdTe量子点具有更高的荧光量子产率和更好的光活化性能.     

Ag-Ag2Se共敏化ZnO花-棒异质结构的合成及其光电化学特性

采用水相法合成ZnO花-棒(ZFRs)有序阵列结构,同时利用离子交换法,制备Ag和Ag2Se量子点共敏化光ZnO光阳极(AA-ZFRs)。通过扫描电子显微镜(SEM)、X射线粉末衍射(XRD)、X射线能量色散谱(EDS)和透射电子显微镜(TEM)等手段对样品进行了分析和表征,并测试其光电化学特性以及量子效应。结果表明,Ag-Ag2Se共敏化ZnO花-棒三维有序结构对太阳光的吸收范围延展至近红外区(750 nm),并且在敏化层与ZnO基质界面形成异质结,有效的抑制光生电子-空穴对复合,增强光转换量子效应,从而提高光电化学性能,开路电压达到-0.77 V,短路电流为0.64 mA。     

碳量子点的绿色合成及检测水体中苦味酸

以香蕉为碳源,采用绿色、经济的一步溶剂水热法合成得到了水溶性好、稳定性高的蓝色荧光碳量子点。通过X射线衍射(XRD)、透射电镜(TEM)、傅里叶红外光谱(FTIR)、紫外-可见吸收光谱和荧光光谱等方法对样品的形貌、结构和光谱性能进行了表征。苦味酸对该碳量子点荧光具有猝灭作用,其荧光猝灭程度与苦味酸浓度在0.5~30.4μmol/L范围内呈良好的线性关系,检出限为9.48×10-8mol/L(S/N=3)。方法用于实际样品中苦味酸的测定,回收率为96.4%~101.4%。通过吸收光谱的变化确定了二者的猝灭类型。     

Hydrothermal synthesis of highly luminescent CdTe quantum dots by adjusting precursors’ concentration and their conjunction with BSA as biological fluorescent probes

A study on hydrothermal synthesis of CdTe quantum dots, highly luminescent nanocrystals at a relatively lower temperature, via changing the concentration of the CdTe precursors, is described. The full width at half maximum ranged from 40 to 80 nm and quantum yield (QY) was detected to be 27.4% at room temperature. The as-prepared CdTe QDs were labeled with BSA for fluorescence probes without pretreatment. Conjunction experimental results suggested that the as-prepared CdTe QDs are suitable for the application of biotechnology.     

超声电化学快速制备近红外CdTe量子点与细胞成像

针对当前水溶性量子点合成路线复杂、量子产率低的现状, 在无需N₂保护的条件下, 采用简便的超声电化学方法快速合成了CdTe量子点前驱体;并对不同条件下制得的前驱体加热回流, 得到水溶性、高质量的近红外CdTe量子点。产物的形貌、结构和组成通过高分辨透射电子显微镜(HRTEM)、X-射线粉末衍射(XRD)等手段进行了表征。考察了超声电化学参数和回流条件对量子点荧光性质的影响。通过控制电流脉冲宽度、反应时间、反应温度等参数, 实现了CdTe量子点前驱体的可控制备;通过调节加热回流条件得到不同荧光发射波长的量子点;选用602 nm近红外发射波长的CdTe量子点标记了子宫颈癌细胞(Hela), 并采用共聚焦技术实现了肿瘤细胞的显微成像观察。和传统的量子点合成方法相比, 超声电化学方法具有合成路线简单、参数易调可控的特点;为高品质量子点的快速制备提供了新的思路, 拓展了超声电化学在纳米材料制备领域的应用。     

超声电化学快速制备近红外CdTe量子点与细胞成像

针对当前水溶性量子点合成路线复杂、量子产率低的现状,在无需N2保护的条件下,采用简便的超声电化学方法快速合成了CdTe量子点前驱体;并对不同条件下制得的前驱体加热回流,得到水溶性、高质量的近红外CdTe量子点。产物的形貌、结构和组成通过高分辨透射电子显微镜(HRTEM)、X-射线粉末衍射(XRD)等手段进行了表征。考察了超声电化学参数和回流条件对量子点荧光性质的影响。通过控制电流脉冲宽度、反应时间、反应温度等参数,实现了CdTe量子点前驱体的可控制备;通过调节加热回流条件得到不同荧光发射波长的量子点;选用602 nm近红外发射波长的CdTe量子点标记了子宫颈癌细胞(Hela),并采用共聚焦技术实现了肿瘤细胞的显微成像观察。和传统的量子点合成方法相比,超声电化学方法具有合成路线简单、参数易调可控的特点;为高品质量子点的快速制备提供了新的思路,拓展了超声电化学在纳米材料制备领域的应用。     

Photoassisted synthesis of CdSe and core-shell CdSe/CdS quantum dots

This paper describes the synthesis of core-shell CdSe/CdS quantum dots (QDs) in aqueous solution by a simple photoassisted method. CdSe was prepared from cadmium nitrate and 1,1-dimethylselenourea precursors under illumination for up to 3 h using a pulsed Nd:YAG laser at 532 nm. The effects that the temperature and the laser irradiation process have on the synthesis of CdSe were monitored by a series of experiments using the precursors at a Cd:Se concentration ratio of 4. Upon increasing the temperature (80-140 degrees C), the size of the CdSe QDs increases and the time required for reaching a maximum photoluminescence (PL) is shortened. Although the as-prepared CdSe QDs possess greater quantum yields (up to 0.072%) compared to those obtained by microwave heating (0.016%), they still fluoresce only weakly. After passivation of CdSe (prepared at 80 degrees C) by CdS using thioacetamide as the S source (Se:S concentration ratio of 1) at 80 degrees C for 24 h, the quantum yield of the core-shell CdSe/CdS QDs at 603 nm is 2.4%. Under UV irradiation of CdSe/CdS for 24 h using a 100-W Hg-Xe lamp, the maximum quantum yield of the stable QDs is 60% at 589 nm. A small bandwidth (W1/2 < 35 nm) indicates the narrow size distribution of the as-prepared core-shell CdSe/CdS QDs. This simple photoassisted method also allows the preparation of differently sized (3.7-6.3-nm diameters) core-shell CdSe/CdS QDs that emit in a wide range (from green to red) when excited at 480 nm.     

CdTe/CdSe核壳量子点的合成及其在指纹显现中的应用

以CdCl2和Te粉为原料,在水相中合成了CdTe量子点核;通过外延生长在CdTe量子点核上包覆一层CdSe量子点,得到具有良好荧光性能的CdTe/CdSe核壳量子点;采用X射线衍射仪、透射电镜、高分辨透射电镜分析了不同反应条件下合成的CdTe/CdSe核壳量子点的晶体结构和微观结构,并对其进行了荧光光谱等测试和指纹显现分析.结果表明,合成的CdTe和CdTe/CdSe量子点粒径在3～5nm之间,粒径分布窄,水分散性良好;可以通过控制反应时间和Te/Se比等得到在500～700nm显示荧光发射峰的CdTe/CdSe核壳量子点.此外,核壳CdTe/CdSe量子点可以有效地和指纹物质结合,可应用于对铝合金油潜指纹的鉴别.     

Facile fabrication of fluorescent-superhydrophobic bifunctional ligand-free quantum dots

We present herein a facile strategy for fabrication of fluorescent-ultrahydrophobic bifunctional ligand-free CdS quantum dots (QDs) using cadmium acetate, sodium sulfide as starting materials, and ethanol as the solvent. The as-prepared CdS QDs without ligands exhibit good photochemical stability and photoluminescence (PL) in comparison with the previously reported aqueous CdS QDs. The effects of various experimental variables, including Cd/S molar ratio, reaction time, and reaction temperature on the optical properties of the obtained CdS QDs have been systematically investigated. Subsquently, dodecanethiol was introduced to modify these CdS QDs, further conferring them with superhydrophobic property, along with good compatibility with polymers. The features and structures of the as-prepared QDs and their hybrids on UV–Vis, PL spectroscopy, Fourier transform infrared, transmission electron microscope, X-ray diffraction, and contact angle have been disscussed.     

Fine tuning of the morphology of copper oxide nanostructures and their application in ambient degradation of methylene blue

A low-cost, green, and reproducibly non-injection one-pot synthesis of high-quality CdS quantum dots (QDs) is reported. The synthesis was performed in the open air by mixing precursors cadmium stearate and S powder into a new solvent N-oleoylmorpholine. An overlapped nucleation-growth stage followed by a dominated growth stage was observed. The resulting QDs exhibited well-resolved absorption fine substructure and a dominant band-edge emission with a narrow size distribution (the full width at half maximum (fwhm) was only 22-24nm). The maximum photoluminescence (PL) quantum yield (QY) was as high as 46.5%. Highly monodispersed CdS QDs with tunable sizes and similar PL fwhm and QYs could also be obtained from the CdS QDs in a large-scale synthesis. The high-resolution transmission electron microscopy (HRTEM) images and powder X-ray diffraction (XRD) pattern suggested that the as-prepared QDs with high crystallinity had a cubic structure. A significant PL improvement and a continuous QY increase for the CdS QDs were observed during a long storage time in air and in a glovebox under room temperature. A slow surface reconstruction was proposed to be the cause for the PL enhancement of CdS QDs.     

Evolution of fluorescence resonance energy transfer between close-packed CdSeS quantum dots under two-photon excitation

Energy transfer (ET) processes between quantum dots (QDS) were investigated by means of steady-state and time-resolved up-conversion luminescence measurements. Two types of CdSeS QDs with different Se/S molar ratios at the similar sizes of ~4.5 nm emit green and orange up-conversion luminescence at infrared laser excitation, separately. The power dependence and nanosecond luminescent decays of QDs films demonstrated that up-conversion luminescence was attributed to two-photon absorption and ET process occurred from green-emitting QDs to orange-emitting QDs. The ET rate was estimated quantitatively to be 0.03 ns(-1) by Dexter theory. The decrease of ET rate is due to Se doped substituted in the Sulfur sites. The band-edge excitonic state is predominating at the initial time evolution and responsible for peak shift and ET. The surface emission of orange-emitting QDs becomes slower, and is attributed to the trapping of electrons from QDs donors.