Introduction of high valent Mo6+ in Prussian blue analog derived Co-layered double hydroxide nanosheets for improved water splitting

Herein, we report a facile method for synthesizing MoCo-layered double hydroxide (LDH) nanosheets employing Prussian blue analog (PBA) as the precursor. The introduction of Mo in Co-LDH modulates the electronic structure, increases the number of active sites and electrochemical surface area to improve the hydrogen evolution, oxygen evolution, and overall water splitting activity. As a result, PBA-derived Mo_0.25Co_0.75-LDH nanosheets demonstrated 10 mA cm^?2 current density at only 220 mV and 115 mV overpotentials for OER and HER, respectively. The overall water splitting was attained at 1.52 V cell voltage for 10 mA cm^?2 current density.     

Synthesis of Tri‐functional Core‐shell CuO@carbon Quantum Dots@carbon Hollow Nanospheres Heterostructure for Non‐enzymatic H2O2 Sensing and Overall Water Splitting Applications

A core‐shell structure with CuO core and carbon quantum dots (CQDs) and carbon hollow nanospheres (CHNS) shell was prepared through facile in‐situ hydrothermal process. The composite was used for non‐enzymatic hydrogen peroxide sensing and electrochemical overall water splitting. The core‐shell structure was established from the transmission electron microscopy image analysis. Raman and UV‐Vis spectroscopy analysis confirmed the interaction between CuO and CQDs. The electrochemical studies showed the limit of detection and sensitivity of the prepared composite as 2.4 nM and 56.72 μA μM^?1 cm^?2, respectively. The core‐shell structure facilitated better charge transportation which in turn exhibited elevated electro‐catalysis towards hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and overall water splitting. The overpotential of 159 mV was required to achieve 10 mA cm^?2 current density for HER and an overpotential of 322 mV was required to achieve 10 mA cm^?2 current density for OER in 1.0 M KOH. A two‐electrode system was constructed for overall water splitting reaction, which showed 10 and 50 mA cm^?2 current density at 1.83 and 1.96 V, respectively. The prepared CuO@CQDs@CHNS catalyst demonstrated excellent robustness in HER and OER catalyzing condition along with overall water splitting reaction. Therefore, the CuO@CQDs@CHNS could be considered as promising electro‐catalyst for H₂O₂ sensing, HER, OER and overall water splitting.     

In Situ Electrochemical Conversion of an Ultrathin Tannin Nickel Iron Complex Film as an Efficient Oxygen Evolution Reaction Electrocatalyst

The oxygen evolution reaction (OER) is an important half reaction in many energy conversion and storage techniques. However, the development of a low‐cost easy‐prepared OER electrocatalyst with high mass activity and rapid kinetics is still challenging. Herein, we report the facile deposition of tannin‐NiFe (TANF) complex film on carbon fiber paper (CP) as a highly efficient OER electrocatalyst. TANF gives rapid OER reaction kinetics with a very small Tafel slope of 28 mV dec^?1. The mass activity of TANF reaches 9.17×10³ Ag^?1 at an overpotential of 300 mV, which is nearly 200‐times larger than that of NiFe double layered hydroxide. Furthermore, tannic acid in TANF can be electrochemically extracted under anodic potential, leaving the inorganic composite Ni_xFe_1?xO_yH_z as the OER‐active species. This work may provide a guide to probing the electrochemical transformation and investigating the reactive species of other metal–organic complexes as heterogeneous electrocatalysts.     

Electrodeposited Cobalt‐Phosphorous‐Derived Films as Competent Bifunctional Catalysts for Overall Water Splitting

One of the challenges to realize large‐scale water splitting is the lack of active and low‐cost electrocatalysts for its two half reactions: H₂ and O₂ evolution reactions (HER and OER). Herein, we report that cobalt‐phosphorous‐derived films (Co‐P) can act as bifunctional catalysts for overall water splitting. The as‐prepared Co‐P films exhibited remarkable catalytic performance for both HER and OER in alkaline media, with a current density of 10 mA cm^?2 at overpotentials of ?94 mV for HER and 345 mV for OER and Tafel slopes of 42 and 47 mV/dec, respectively. They can be employed as catalysts on both anode and cathode for overall water splitting with 100 % Faradaic efficiency, rivalling the integrated performance of Pt and IrO₂. The major composition of the as‐prepared and post‐HER films are metallic cobalt and cobalt phosphide, which partially evolved to cobalt oxide during OER.     

Double Perovskite LaFexNi1−xO3 Nanorods Enable Efficient Oxygen Evolution Electrocatalysis

Perovskite‐based electrocatalysts are one of the most promising materials for oxygen evolution reaction (OER), but their activity and durability are still far from desirable. Herein, we demonstrate that the double perovskite LaFe_xNi_1?xO₃ (LFNO) nanorods (NRs) can be adopted as highly active and stable OER electrocatalysts. The optimized LFNO‐II NRs with Ni/Fe ratio of 8:2 achieve a low overpotential of 302 mV at 10 mA cm^?2 and a small Tafel slope of 50 mV dec^?1, outperforming those of the commercial Ir/C. The LFNO‐II NRs also show high OER stability with slight current decrease after 20 h. The enhanced activity is explained by the improved surface area, tailored electronic structure as well as strong hybridization between O and Ni.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Nanoscale Trimetallic Metal–Organic Frameworks Enable Efficient Oxygen Evolution Electrocatalysis

Metal–organic frameworks (MOFs) are a class of promising materials for diverse heterogeneous catalysis, but they are usually not directly employed for oxygen evolution electrocatalysis. Most reports focus on using MOFs as templates to in situ create efficient electrocatalysts through annealing. Herein, we prepared a series of Fe/Ni‐based trimetallic MOFs (Fe/Ni/Co(Mn)‐MIL‐53 accordingly to the Material of Institute Lavoisier) by solvothermal synthesis, which can be directly adopted as highly efficient electrocatalysts. The Fe/Ni/Co(Mn)‐MIL‐53 shows a volcano‐type oxygen evolution reaction (OER) activity as a function of compositions. The optimized Fe/Ni_2.4/Co_0.4‐MIL‐53 can reach a current density of 20 mA cm^?2 at low overpotential of 236 mV with a small Tafel slope of 52.2 mV dec^?1. In addition, the OER performance of these MOFs can be further enhanced by directly being grown on nickel foam (NF).     

Strong‐Coupled Cobalt Borate Nanosheets/Graphene Hybrid as Electrocatalyst for Water Oxidation Under Both Alkaline and Neutral Conditions

Developing highly active catalysts for the oxygen evolution reaction (OER) is of paramount importance for designing various renewable energy storage and conversion devices. Herein, we report the synthesis of a category of Co‐Pi analogue, namely cobalt‐based borate (Co‐B_i) ultrathin nanosheets/graphene hybrid by a room‐temperature synthesis approach. Benefiting from the high surface active sites exposure yield, enhanced electron transfer capacity, and strong synergetic coupled effect, this Co‐B_i NS/G hybrid shows high catalytic activity with current density of 10 mA cm^?2 at overpotential of 290 mV and Tafel slope of 53 mV dec^?1 in alkaline medium. Moreover, Co‐B_i NS/G electrocatalysts also exhibit promising performance under neutral conditions, with a low onset potential of 235 mV and high current density of 14.4 mA cm^?2 at 1.8 V, which is the best OER performance among well‐developed Co‐based OER electrocatalysts to date. Our finding paves a way to develop highly active OER electrocatalysts.     

Amorphous Nanocages of Cu‐Ni‐Fe Hydr(oxy)oxide Prepared by Photocorrosion For Highly Efficient Oxygen Evolution

Electrochemical water splitting requires efficient, low‐cost water oxidation catalysts to accelerate the sluggish kinetics of the water oxidation reaction. A rapid photocorrosion method is now used to synthesize the homogeneous amorphous nanocages of Cu‐Ni‐Fe hydr(oxy)oxide as a highly efficient electrocatalyst for the oxygen evolution reaction (OER). The as‐fabricated product exhibits a low overpotential of 224 mV on a glassy carbon electrode at 10 mA cm^?2 (even lower down to 181 mV when supported on Ni foam) with a Tafel slope of 44 mV dec^?1 for OER in an alkaline solution. The obtained catalyst shows an extraordinarily large mass activity of 1464.5 A g^?1 at overpotential of 300 mV, which is the highest mass activity for OER. This synthetic strategy may open a brand new pathway to prepare copper‐based ternary amorphous nanocages for greatly enhanced oxygen evolution.     

Iron–Cobalt Phosphomolybdate with High Electrocatalytic Activity for Oxygen Evolution Reaction

Iron–cobalt phosphomolybdate (FeCoPM₁₂) nanoparticles, which are highly efficient catalytic materials for the oxygen evolution reaction (OER), were fabricated through a coprecipitation route. Compared with iron–cobalt hydroxide and state‐of‐the‐art RuO₂ electrocatalysts, the as‐prepared FeCoPM₁₂ sample exhibited robust OER catalytic activity with a low overpotential of 258 mV at a current density of 10 mA cm⁻² and a small Tafel slope of 33 mV dec⁻¹. Moreover, the as‐synthesized sample presented preferable stability and after 10 h at 1.52 V the current density degraded by merely 8.3 %. This is ascribed to the high electrochemical stability and small porous structure of FeCoPM₁₂, which provide effective electron transmission and improve the catalytic performance for OER in alkaline media.     

Molybdenum Carbide‐Embedded Multichannel Hollow Carbon Nanofibers as Bifunctional Catalysts for Water Splitting

With the environmental pollution and non‐renewable fossil fuels, it is imperative to develop eco‐friendly, renewable, and highly efficient electrocatalysts for sustainable energy. Herein, a simple electrospinning process used to synthesis Mo₂C‐embedded multichannel hollow carbon nanofibers (Mo₂C‐MCNFs) and followed by the pyrolysis process. As prepared lotus root‐like nanoarchitecture could offer rich porosity and facilitate the electrolyte infiltration, the Mo₂C‐MCNFs delivered favourable catalytic activity for HER and OER. The resultant catalysts exhibit low overpotentials of 114 mV and 320 mV at a current density of 10 mA cm^?2 for HER and OER, respectively. Furthermore, using the Mo₂C‐MCNFs catalysts as a bifunctional electrode toward overall water splitting, which only needs a small cell voltage of 1.68 V to afford a current density of 10 mA cm^?2 in the home‐made alkaline electrolyzer. This interesting work presents a simple and effective strategy to further fabricating tunable nanostructures for energy‐related applications.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

Regulating the Spin State of FeIII by Atomically Anchoring on Ultrathin Titanium Dioxide for Efficient Oxygen Evolution Electrocatalysis

Ferric oxides and (oxy)hydroxides, although plentiful and low‐cost, are rarely considered for oxygen evolution reaction (OER) owing to the too high spin state (e_g filling ca. 2.0) suppressing the bonding strength with reaction intermediates. Now, a facile adsorption–oxidation strategy is used to anchor Fe^III atomically on an ultrathin TiO₂ nanobelt to synergistically lower the spin state (e_g filling ca. 1.08) to enhance the adsorption with oxygen‐containing intermediates and improve the electro‐conductibility for lower ohmic loss. The electronic structure of the catalyst is predicted by DFT calculation and perfectly confirmed by experimental results. The catalyst exhibits superior performance for OER with overpotential 270 mV @10 mA cm^?2 and 376 mV @100 mA cm^?2 in alkaline solution, which is much better than IrO₂/C and RuO₂/C and is the best iron‐based OER catalyst free of active metals such as Ni, Co, or precious metals.     

Non‐3d Metal Modulation of a Cobalt Imidazolate Framework for Excellent Electrocatalytic Oxygen Evolution in Neutral Media

Cobalt imidazolate frameworks are classical electrocatalysts for the oxygen evolution reaction (OER) but suffer from the relatively low activity. Here, a non‐3d metal modulation strategy is presented for enhancing the OER activity of cobalt imidazolate frameworks. Two isomorphous frameworks [Co₄(MO₄)(eim)₆] (M=Mo or W, Heim=2‐ethylimidazole) having Co(eim)₃(MO₄) units and high water stabilities were designed and synthesized. In different neutral media, the Mo‐modulated framework coated on a glassy carbon electrode shows the best OER performances (1 mA cm^?2 at an overpotential of 210 mV in CO₂‐saturated 0.5 m KHCO₃ electrolyte and 2/10/22 mA cm^?2 at overpotential of 388/490/570 mV in phosphate buffer solution) among non‐precious metal catalysts and even outperforms RuO₂. Spectroscopic measurements and computational simulations revealed that the non‐3d metals modulate the electronic structure of Co for optimum reactant/product adsorption and tailor the energy of rate‐determining step to a more moderate value.     

Nickel Confined in the Interlayer Region of Birnessite: an Active Electrocatalyst for Water Oxidation

We report a synthetic method to enhance the electrocatalytic activity of birnessite for the oxygen evolution reaction (OER) by intercalating Ni²⁺ ions into the interlayer region. Electrocatalytic studies showed that nickel (7.7 atomic %)‐intercalated birnessite exhibits an overpotential (η) of 400 mV for OER at an anodic current of 10 mA cm^?2. This η is significantly lower than the η values for birnessite (η≈700 mV) and the active OER catalyst β‐Ni(OH)₂ (η≈550 mV). Molecular dynamics simulations suggest that a competition among the interactions between the nickel cation, water, and birnessite promote redox chemistry in the spatially confined interlayer region.     

Imine Gels Based on Ferrocene and Porphyrin and Their Electrocatalytic Property

A series of porphyrin‐based imine gels have been synthesized via dynamic covalent gelation between 5,10,15,20‐tetra(4‐aminophenyl)‐21H,23H‐porphyrin (H₂TAPP) derivatives and various aldehyde compounds. The porphyrin‐ferrocene imine gels based on MTAPP (M=H₂, Ni²⁺, Co²⁺, Pd²⁺ and Zn²⁺) and ferrocene‐1,1′‐dicarbaldehyde (NA) display efficient HER, OER and ORR activities in alkaline media. Among the gels, CoTAPP‐NA shows an HER current density of 10 mA cm^?2 at low overpotential of 470 mV and small Tafel slope of 110 mV decade^?1 in alkaline media. CoTAPP‐NA also exhibits OER catalytic activity with low overpotential (416 mV for 10 mA cm^?2). CoTAPP‐NA shows ability in overall water splitting in alkaline media. In addition, CoTAPP‐NA exhibits onset potential (E_p) of 0.95 V and half‐wave potential (E_1/2) of 0.84 V in 1.0 mol L^?1 KOH solution for oxygen reduction. Moreover, the gel catalyst shows good stability.     

Modulating the Electronic Structure of Porous Nanocubes Derived from Trimetallic Metal–Organic Frameworks to Boost Oxygen Evolution Reaction Performance

The preparation of noble metal‐free catalysts for water splitting is the key to low‐cost, sustainable hydrogen generation. Herein, through a pyrolysis‐oxidation process, we prepared a series of Co‐Fe‐Ni trimetallic oxidized carbon nanocubes (Co_1‐XFe_XNi‐OCNC) with a continuously changeable Co/Fe ratio (X=0, 0.1, 0.2, 0.5, 0.8, 0.9, 1). The Co_1‐XFe_XNi‐OCNC shows a volcano‐type oxygen evolution reaction (OER) activity. The optimized Co_0.1Fe_0.9Ni‐OCNC achieves a low overpotential of 268 mV at 10 mA cm^?2 with a very low Tafel slope of 48 mV dec^?1 in 1 m KOH. At the same time, the stability of the Co_0.1Fe_0.9Ni‐OCNC is also outstanding; after 1000 CV cycles, the LSV plot is almost coincident. Moreover, the potential remains almost of the same value at 10 mA cm^?2 after 12 h in comparison to the initial value. The excellent electrocatalytic properties can be attributed to the synergistic cooperation between each component. Therefore, the Co_0.1Fe_0.9Ni‐OCNC is a promising candidate instead of precious metal‐based electrocatalysts for OER.     

Sodium Cobalt Metaphosphate as an Efficient Oxygen Evolution Reaction Catalyst in Alkaline Solution

Sodium cobalt metaphosphate [NaCo(PO₃)₃] has CoO octahedra (CoO₆) and shows superior oxygen evolution reaction (OER) activity in alkaline solution, comparable with the state‐of‐the‐art precious‐metal RuO₂ catalyst. OER catalysts of this metaphosphate are prepared by combustion (Cb) and solid‐state (SS) methods. The combustion‐assisted method offers a facile synthesis and one‐step carbon composite formation. Unusually high catalytic activity was observed in NCoM‐Cb‐Ar and could be due to chemical coupling effects between NaCo(PO₃)₃ and partially graphitized carbon. This novel electrocatalyst exhibits very small overpotential of 340 mV with high mass activity of 532 A g^?1. Good charge transfer abilities and chemical coupling between NaCo(PO₃)₃ and amorphous carbon gives the OER activity in NCoM‐Cb‐Ar.     

HfN Nanoparticles: An Unexplored Catalyst for the Electrocatalytic Oxygen Evolution Reaction

Water electrolysis is one of the most promising methods to produce H₂ and O₂ as high potential fuels. Comparing the two half‐reactions, the oxygen evolution reaction (OER) is the more difficult to be optimized and still relies on expensive noble metal‐based catalysts such as Ru or Ir. In this paper, we prepared nanoparticles of HfN and Hf₂ON₂ and tested them for the OER for the first time. The HfN sample, in particular, showed the highest activity, requiring an overpotential of only 358 mV at 10 mA cm^?2 in Fe‐free electrolyte and, above all, exhibiting long‐term stability. This result places this system amongst one of the most promising catalysts for OER tested to date, in terms of sustainability, activity and stability. The prepared nanoparticles are small (less than 15 nm in diameter), well‐defined in shape and crystalline, and were characterised before and after electrochemical testing also via electron microscopy (EM), powder X‐ray diffraction (PXRD) and X‐ray photoelectron spectroscopy (XPS).     

Impact of Surface Defects on LaNiO3 Perovskite Electrocatalysts for the Oxygen Evolution Reaction

Perovskite oxides are regarded as promising electrocatalysts for water splitting due to their cost-effectiveness, high efficiency and durability in the oxygen evolution reaction (OER). Despite these advantages, a fundamental understanding of how critical structural parameters of perovskite electrocatalysts influence their activity and stability is lacking. Here, we investigate the impact of structural defects on OER performance for representative LaNiO₃ perovskite electrocatalysts. Hydrogen reduction of 700 °C calcined LaNiO₃ induces a high density of surface oxygen vacancies, and confers significantly enhanced OER activity and stability compared to unreduced LaNiO₃; the former exhibit a low onset overpotential of 380 mV at 10 mA cm⁻² and a small Tafel slope of 70.8 mV dec⁻¹. Oxygen vacancy formation is accompanied by mixed Ni²⁺/Ni³⁺ valence states, which quantum-chemical DFT calculations reveal modify the perovskite electronic structure. Further, it reveals that the formation of oxygen vacancies is thermodynamically more favourable on the surface than in the bulk; it increases the electronic conductivity of reduced LaNiO₃ in accordance with the enhanced OER activity that is observed.