Nanoscale Trimetallic Metal–Organic Frameworks Enable Efficient Oxygen Evolution Electrocatalysis

Metal–organic frameworks (MOFs) are a class of promising materials for diverse heterogeneous catalysis, but they are usually not directly employed for oxygen evolution electrocatalysis. Most reports focus on using MOFs as templates to in situ create efficient electrocatalysts through annealing. Herein, we prepared a series of Fe/Ni‐based trimetallic MOFs (Fe/Ni/Co(Mn)‐MIL‐53 accordingly to the Material of Institute Lavoisier) by solvothermal synthesis, which can be directly adopted as highly efficient electrocatalysts. The Fe/Ni/Co(Mn)‐MIL‐53 shows a volcano‐type oxygen evolution reaction (OER) activity as a function of compositions. The optimized Fe/Ni_2.4/Co_0.4‐MIL‐53 can reach a current density of 20 mA cm^?2 at low overpotential of 236 mV with a small Tafel slope of 52.2 mV dec^?1. In addition, the OER performance of these MOFs can be further enhanced by directly being grown on nickel foam (NF).     

Electrodeposition of Defect-Rich Ternary NiCoFe Layered Double Hydroxides: Fine Modulation of Co3+ for Highly Efficient Oxygen Evolution Reaction

The low-cost, high-abundance and durable layered double hydroxides (LDHs) have been considered as promising electrocatalysts for oxygen evolution reaction (OER). However, the easy agglomeration of lamellar LDHs in the aqueous phase limits their practical applications. Herein, a series of ternary NiCoFe LDHs were successfully fabricated on nickel foam (NF) via a simple electrodeposition method. The as-prepared Ni(Co_0.5Fe_0.5)/NF displayed an unique nanoarray structural feature. It showed an OER overpotential of 209 mV at a current density of 10 mA cm⁻² in alkaline solution, which was superior to most systems reported so far. As evidenced by the XPS and XAFS results, such excellent performance of Ni(Co_0.5Fe_0.5)/NF was attributed to the higher Co³⁺/Co²⁺ ratio and more defects exposed, comparing with Ni(Co_0.5Fe_0.5)-bulk and Ni(Co_0.5Fe_0.5)-mono LDHs prepared by conventional coprecipitation method. Furthermore, the ratio of Co to Fe could significantly tune the Co electronic structure of Ni(Co_xFe_1-x)/NF composites (x=0.25, 0.50 and 0.75) and affect the electrocatalytic activity for OER, in which Ni(Co_0.5Fe_0.5)/NF showed the lowest energy barrier for OER rate-determining step (from O* to OOH*). This work proposes a facile method to develop high-efficiency OER electrocatalysts.     

Activating CoOOH Porous Nanosheet Arrays by Partial Iron Substitution for Efficient Oxygen Evolution Reaction

Iron‐substituted CoOOH porous nanosheet arrays grown on carbon fiber cloth (denoted as Fe_xCo_1?xOOH PNSAs/CFC, 0≤x≤0.33) with 3D hierarchical structures are synthesized by in situ anodic oxidation of α‐Co(OH)₂ NSAs/CFC in solution of 0.01 m (NH₄)₂Fe(SO₄)₂. X‐ray absorption fine spectra (XAFS) demonstrate that CoO₆ octahedral structure in CoOOH can be partially substituted by FeO₆ octahedrons during the transformation from α‐Co(OH)₂ to Fe_xCo_1?xOOH, and this is confirmed for the first time in this study. The content of Fe in Fe_xCo_1?xOOH, no more than 1/3 of Co, can be controlled by adjusting the in situ anodic oxidation time. Fe_0.33Co_0.67OOH PNSAs/CFC shows superior OER electrocatalytic performance, with a low overpotential of 266 mV at 10 mA cm^?2, small Tafel slope of 30 mV dec^?1, and high durability.     

Trimetallic Oxyhydroxide Coralloids for Efficient Oxygen Evolution Electrocatalysis

Trimetallic oxyhydroxides are one of the most effective materials for oxygen evolution reaction (OER) catalysis, a key process for water splitting. Herein, we describe a facile wet‐chemical method to directly grow a series of coralloid trimetallic oxyhydroxides on arbitrary substrates such as nickel foam (NF) and carbon nanotubes (CNTs). The amount of iron in these oxyhydroxide sponges on NF and CNTs was precisely controlled, revealing that the electrocatalytic activity of the WCoFe trimetallic oxyhydroxides depends on the Fe amount in a volcano‐like fashion. The optimized W_0.5Co_0.4Fe_0.1/NF catalyst exhibited an overpotential of only 310 mV to deliver a large current density of 100 mA cm⁻² and a very low Tafel slope of 32 mV dec⁻¹. It also showed superior stability with negligible activity decay after use in the OER for 21 days (>500 h). X‐ray photoelectron spectroscopy revealed that the addition of Fe leads to an on average lower Co oxidation state, which contributes to the enhanced OER performance.     

Regulating the Spin State of FeIII by Atomically Anchoring on Ultrathin Titanium Dioxide for Efficient Oxygen Evolution Electrocatalysis

Ferric oxides and (oxy)hydroxides, although plentiful and low‐cost, are rarely considered for oxygen evolution reaction (OER) owing to the too high spin state (e_g filling ca. 2.0) suppressing the bonding strength with reaction intermediates. Now, a facile adsorption–oxidation strategy is used to anchor Fe^III atomically on an ultrathin TiO₂ nanobelt to synergistically lower the spin state (e_g filling ca. 1.08) to enhance the adsorption with oxygen‐containing intermediates and improve the electro‐conductibility for lower ohmic loss. The electronic structure of the catalyst is predicted by DFT calculation and perfectly confirmed by experimental results. The catalyst exhibits superior performance for OER with overpotential 270 mV @10 mA cm^?2 and 376 mV @100 mA cm^?2 in alkaline solution, which is much better than IrO₂/C and RuO₂/C and is the best iron‐based OER catalyst free of active metals such as Ni, Co, or precious metals.     

Strong‐Coupled Cobalt Borate Nanosheets/Graphene Hybrid as Electrocatalyst for Water Oxidation Under Both Alkaline and Neutral Conditions

Developing highly active catalysts for the oxygen evolution reaction (OER) is of paramount importance for designing various renewable energy storage and conversion devices. Herein, we report the synthesis of a category of Co‐Pi analogue, namely cobalt‐based borate (Co‐B_i) ultrathin nanosheets/graphene hybrid by a room‐temperature synthesis approach. Benefiting from the high surface active sites exposure yield, enhanced electron transfer capacity, and strong synergetic coupled effect, this Co‐B_i NS/G hybrid shows high catalytic activity with current density of 10 mA cm^?2 at overpotential of 290 mV and Tafel slope of 53 mV dec^?1 in alkaline medium. Moreover, Co‐B_i NS/G electrocatalysts also exhibit promising performance under neutral conditions, with a low onset potential of 235 mV and high current density of 14.4 mA cm^?2 at 1.8 V, which is the best OER performance among well‐developed Co‐based OER electrocatalysts to date. Our finding paves a way to develop highly active OER electrocatalysts.     

Topochemical Synthesis of Two‐Dimensional Transition‐Metal Phosphides Using Phosphorene Templates

Transition‐metal phosphides (TMPs) have emerged as a fascinating class of narrow‐gap semiconductors and electrocatalysts. However, they are intrinsic nonlayered materials that cannot be delaminated into two‐dimensional (2D) sheets. Here, we demonstrate a general bottom‐up topochemical strategy to synthesize a series of 2D TMPs (e.g. Co₂P, Ni₁₂P₅, and Co_xFe_2?xP) by using phosphorene sheets as the phosphorus precursors and 2D templates. Notably, 2D Co₂P is a p‐type semiconductor, with a hole mobility of 20.8 cm² V^?1 s^?1 at 300 K in field‐effect transistors. It also behaves as a promising electrocatalyst for the oxygen evolution reaction (OER), thanks to the charge‐transport modulation and improved surface exposure. In particular, iron‐doped Co₂P (i.e. Co_1.5Fe_0.5P) delivers a low overpotential of only 278 mV at a current density of 10 mA cm^?2 that outperforms the commercial Ir/C benchmark (304 mV).     

Non‐3d Metal Modulation of a Cobalt Imidazolate Framework for Excellent Electrocatalytic Oxygen Evolution in Neutral Media

Cobalt imidazolate frameworks are classical electrocatalysts for the oxygen evolution reaction (OER) but suffer from the relatively low activity. Here, a non‐3d metal modulation strategy is presented for enhancing the OER activity of cobalt imidazolate frameworks. Two isomorphous frameworks [Co₄(MO₄)(eim)₆] (M=Mo or W, Heim=2‐ethylimidazole) having Co(eim)₃(MO₄) units and high water stabilities were designed and synthesized. In different neutral media, the Mo‐modulated framework coated on a glassy carbon electrode shows the best OER performances (1 mA cm^?2 at an overpotential of 210 mV in CO₂‐saturated 0.5 m KHCO₃ electrolyte and 2/10/22 mA cm^?2 at overpotential of 388/490/570 mV in phosphate buffer solution) among non‐precious metal catalysts and even outperforms RuO₂. Spectroscopic measurements and computational simulations revealed that the non‐3d metals modulate the electronic structure of Co for optimum reactant/product adsorption and tailor the energy of rate‐determining step to a more moderate value.     

Double Perovskite LaFexNi1−xO3 Nanorods Enable Efficient Oxygen Evolution Electrocatalysis

Perovskite‐based electrocatalysts are one of the most promising materials for oxygen evolution reaction (OER), but their activity and durability are still far from desirable. Herein, we demonstrate that the double perovskite LaFe_xNi_1?xO₃ (LFNO) nanorods (NRs) can be adopted as highly active and stable OER electrocatalysts. The optimized LFNO‐II NRs with Ni/Fe ratio of 8:2 achieve a low overpotential of 302 mV at 10 mA cm^?2 and a small Tafel slope of 50 mV dec^?1, outperforming those of the commercial Ir/C. The LFNO‐II NRs also show high OER stability with slight current decrease after 20 h. The enhanced activity is explained by the improved surface area, tailored electronic structure as well as strong hybridization between O and Ni.     

Balancing Activity and Stability in Spinel Cobalt Oxides through Geometrical Sites Occupation towards Efficient Electrocatalytic Oxygen Evolution

Designing active and stable oxygen evolution reaction (OER) catalysts are vitally important to various energy conversion devices. Herein, we introduce elements Ni and Mn into (Co)_tet(Co₂)_octO₄ nanosheets (NSs) at fixed geometrical sites, including Mn_oct, Ni_oct, and Ni_tet, to optimize the initial geometrical structure and modulate the CoCo₂O₄ surface from oxygen-excess to oxygen-deficiency. The pristine (Ni,Mn)-(Co)_tet(Co₂)_octO₄ NSs shows excellent OER activity with an overpotential of 281.6 mV at a current density of 10 mA cm⁻². Moreover, without damaging their initial activity, the activated (Act)-(Ni,Mn)-(Co)_tet(Co₂)_octO₄ NSs after surface reconstruction exhibit long-term stability of 100 h under 10 mA cm⁻², 50 mA cm⁻², or even 100 mA cm⁻². The optimal balance between electroactivity and stability leads to remarkable OER performances, providing a pivotal guideline for designing ideal electrocatalysts and inspiring more works to focus on the dynamic change of each occupation site component.     

Fe/Co‐based Bimetallic MOF‐derived Co3Fe7@NCNTFs Bifunctional Electrocatalyst for High‐Efficiency Overall Water Splitting

Electrocatalytic water splitting to produce hydrogen and oxygen is regarded as one of the most promising methods to generate clean and sustainable energy for replacing fossil fuels. However, the design and development of an efficient bifunctional catalyst for simultaneous generation of hydrogen and oxygen remains extremely challenging yet is critical for the practical implementation of water electrolysis. Here, we report a facile method to fabricate novel N‐doped carbon nanotube frameworks (NCNTFs) by the pyrolysis of a bimetallic metal organic framework (MIL‐88‐Fe/Co). The resultant electrocatalyst, Co₃Fe₇@NCNTFs, exhibits excellent oxygen evolution reaction (OER) activity, achieving 10 mA/cm² at a low overpotential of just 264 mV in 1 M KOH solution, and 197 mV for the hydrogen evolution reaction. The high electrocatalytic activity arises from the synergistic effect between the chemistry of the Co₃Fe₇ and the NCNTs coupled to the novel framework structure. The remarkable electrocatalytic performance of our bifunctional electrocatalyst provides a promising pathway to high‐performance overall water splitting and electrochemical energy devices.     

Active Electron Density Modulation of Co3O4‐Based Catalysts Enhances their Oxygen Evolution Performance

Despite the fact that many strategies have been developed to improve the efficiency of the oxygen evolution reaction (OER), the precise modulation of the surface electronic properties of catalysts to improve their catalytic activity is still challenging. Herein, we demonstrate that the surface active electron density of Co₃O₄ can be effectively regulated by an argon‐ion irradiation method. X‐ray photoelectron and synchrotron x‐ray absorption spectroscopy, UV photoelectron spectrometry, and DFT calculations show that the surface active electron density band center of Co₃O₄ has been upshifted, leading to a significantly enhanced absorption capability of the oxo group. The optimized Co₃O₄‐based catalysts exhibit an excellent overpotential of 260 mV at 10 mA cm^?2 and Tafel slope of 54 mV dec^?1, superior to the capability of the benchmark RuO₂, representing one of the best Co‐based OER catalysts. This approach could guide the future rational design and discovery of ideal electrocatalysts.     

Iron-Doped Nickel Molybdate with Enhanced Oxygen Evolution Kinetics

Electrochemical water splitting is one of the potential approaches for making renewable energy production and storage viable. The oxygen evolution reaction (OER), as a sluggish four-electron electrochemical reaction, has to overcome high overpotential to accomplish overall water splitting. Therefore, developing low-cost and highly active OER catalysts is the key for achieving efficient and economical water electrolysis. In this work, Fe-doped NiMoO₄ was synthesized and evaluated as the OER catalyst in alkaline medium. Fe³⁺ doping helps to regulate the electronic structure of Ni centers in NiMoO₄, which consequently promotes the catalytic activity of NiMoO₄. The overpotential to reach a current density of 10 mA cm⁻² is 299 mV in 1 m KOH for the optimal Ni_0.9Fe_0.1MoO₄, which is 65 mV lower than that for NiMoO₄. Further, the catalyst also shows exceptional performance stability during a 2 h chronopotentiometry testing. Moreover, the real catalytically active center of Ni_0.9Fe_0.1MoO₄ is also unraveled based on the ex situ characterizations. These results provide new alternatives for precious-metal-free catalysts for alkaline OER and also expand the Fe-doping-induced synergistic effect towards performance enhancement to new catalyst systems.     

Large‐Scale,Bottom‐Up Synthesis of Binary Metal–Organic Framework Nanosheets for Efficient Water Oxidation

Ultrathin metal–organic framework (MOF) nanosheets (NSs) offer potential for many applications, but the synthetic strategies are largely limited to top‐down, low‐yield exfoliation methods. Herein, Ni–M–MOF (M=Fe, Al, Co, Mn, Zn, and Cd) NSs are reported with a thickness of only several atomic layers, prepared by a large‐scale, bottom‐up solvothermal method. The solvent mixture of N,N‐dimethylacetamide and water plays key role in controlling the formation of these two‐dimensional MOF NSs. The MOF NSs can be directly used as efficient electrocatalysts for the oxygen evolution reaction, in which the Ni–Fe–MOF NSs deliver a current density of 10 mA cm^?2 at a low overpotential of 221 mV with a small Tafel slope of 56.0 mV dec^?1, and exhibit excellent stability for at least 20 h without obvious activity decay. Density functional theory calculations on the energy barriers for OER occurring at different metal sites confirm that Fe is the active site for OER at Ni–Fe–MOF NSs.     

Coupling Magnetic Single‐Crystal Co2Mo3O8 with Ultrathin Nitrogen‐Rich Carbon Layer for Oxygen Evolution Reaction

Transition‐metal oxides as electrocatalysts for the oxygen evolution reaction (OER) provide a promising route to face the energy and environmental crisis issues. Although palmeirite oxide A₂Mo₃O₈ as OER catalyst has been explored, the correlation between its active sites (tetrahedral or octahedral) and OER performance has been elusive. Now, magnetic Co₂Mo₃O₈@NC‐800 composed of highly crystallized Co₂Mo₃O₈ nanosheets and ultrathin N‐rich carbon layer is shown to be an efficient OER catalyst. The catalyst exhibits favorable performance with an overpotential of 331 mV@10 mA cm^?2 and 422 mV@40 mA cm^?2, and a full water‐splitting electrolyzer with it as anode catalyst shows a cell voltage of 1.67 V@10 mA cm^?2 in alkaline. Combined HAADFSTEM, magnetic, and computational results show that factors influencing the OER performance can be attributed to the tetrahedral Co sites (high spin, t₂³e⁴), which improve the OER kinetics of rate‐determining step to form *OOH.     

Amorphous Nanocages of Cu‐Ni‐Fe Hydr(oxy)oxide Prepared by Photocorrosion For Highly Efficient Oxygen Evolution

Electrochemical water splitting requires efficient, low‐cost water oxidation catalysts to accelerate the sluggish kinetics of the water oxidation reaction. A rapid photocorrosion method is now used to synthesize the homogeneous amorphous nanocages of Cu‐Ni‐Fe hydr(oxy)oxide as a highly efficient electrocatalyst for the oxygen evolution reaction (OER). The as‐fabricated product exhibits a low overpotential of 224 mV on a glassy carbon electrode at 10 mA cm^?2 (even lower down to 181 mV when supported on Ni foam) with a Tafel slope of 44 mV dec^?1 for OER in an alkaline solution. The obtained catalyst shows an extraordinarily large mass activity of 1464.5 A g^?1 at overpotential of 300 mV, which is the highest mass activity for OER. This synthetic strategy may open a brand new pathway to prepare copper‐based ternary amorphous nanocages for greatly enhanced oxygen evolution.     

Metallic Co4N Porous Nanowire Arrays Activated by Surface Oxidation as Electrocatalysts for the Oxygen Evolution Reaction

Designing highly efficient electrocatalysts for oxygen evolution reaction (OER) plays a key role in the development of various renewable energy storage and conversion devices. In this work, we developed metallic Co₄N porous nanowire arrays directly grown on flexible substrates as highly active OER electrocatalysts for the first time. Benefiting from the collaborative advantages of metallic character, 1D porous nanowire arrays, and unique 3D electrode configuration, surface oxidation activated Co₄N porous nanowire arrays/carbon cloth achieved an extremely small overpotential of 257 mV at a current density of 10 mA cm⁻², and a low Tafel slope of 44 mV dec⁻¹ in an alkaline medium, which is the best OER performance among reported Co‐based electrocatalysts to date. Moreover, in‐depth mechanistic investigations demonstrate the active phases are the metallic Co₄N core inside with a thin cobalt oxides/hydroxides shell during the OER process. Our finding introduces a new concept to explore the design of high‐efficiency OER electrocatalysts.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.     

Controlled Synthesis of Cr‐Co0.85Se Nanoarrays for Water Splitting at an Ultralow Cell Voltage of 1.43 V

Water splitting has attracted more and more attention as a promising strategy for the production of clean hydrogen fuel. In this work, a new synthesis strategy was proposed, and Co_0.85Se was synthesized on nickel foam as the main matrix. The doping of appropriate Cr amount into the target of Co_0.85Se and the Cr‐Co_0.85Se resulted in an excellent electrochemical performance. The doping of Cr introduces Cr³⁺ ions which substitute Co²⁺ and Co³⁺ ions in Co_0.85Se, so that the lattice parameters of the main matrix were changed. It is worth noting that the Cr0.15‐Co_0.85Se/NF material exhibits an excellent performance in the oxygen evolution reaction (OER) test. When the current density reaches 50 mA cm^?2 for OER, the overpotential is only 240 mV. For the hydrogen evolution reaction (HER) tests, the overpotential is only 117 mV to drive 10 mA cm^?2 of current density. Moreover, when the Cr0.15‐Co_0.85Se/NF material is used as a two‐electrode device for whole water splitting, the required cell voltage is only 1.43 V to reach a current density of 10 mA cm^?2, which is among the lowest values of the published catalysts up to now. In addition, the Cr0.15‐Co_0.85Se/NF catalyst also exhibits excellent stability during a long period of water splitting. The experimental result demonstrates that the change of the lattice structure has an obvious influence on the electrocatalytic activity of the material. When an external electric field is applied, it facilitates the rapid electron transfer rate and enhances the electrocatalytic performance and stability of the material.     

Imine Gels Based on Ferrocene and Porphyrin and Their Electrocatalytic Property

A series of porphyrin‐based imine gels have been synthesized via dynamic covalent gelation between 5,10,15,20‐tetra(4‐aminophenyl)‐21H,23H‐porphyrin (H₂TAPP) derivatives and various aldehyde compounds. The porphyrin‐ferrocene imine gels based on MTAPP (M=H₂, Ni²⁺, Co²⁺, Pd²⁺ and Zn²⁺) and ferrocene‐1,1′‐dicarbaldehyde (NA) display efficient HER, OER and ORR activities in alkaline media. Among the gels, CoTAPP‐NA shows an HER current density of 10 mA cm^?2 at low overpotential of 470 mV and small Tafel slope of 110 mV decade^?1 in alkaline media. CoTAPP‐NA also exhibits OER catalytic activity with low overpotential (416 mV for 10 mA cm^?2). CoTAPP‐NA shows ability in overall water splitting in alkaline media. In addition, CoTAPP‐NA exhibits onset potential (E_p) of 0.95 V and half‐wave potential (E_1/2) of 0.84 V in 1.0 mol L^?1 KOH solution for oxygen reduction. Moreover, the gel catalyst shows good stability.