基于纳米生物条形码和杂交链式反应构建电化学生物传感器用于蛋白激酶活性分析

该文结合纳米生物条形码和杂交链式反应(HCR)双重信号放大策略构建了一种电化学生物传感器用于蛋白激酶A(PKA)的活性分析。以MoS₂/AuNPs纳米复合材料作为玻碳电极修饰材料，半胱氨酸修饰的底物肽链通过Au-S键自组装到修饰电极表面。当存在目标物PKA时，底物肽链被磷酸化，可与纳米生物条形码(S1-AuNPs-Ab)特异性结合，以S1-AuNPs-Ab探针中S1链作为引发链，可诱导发夹DNA(H1和H2)发生杂交链式反应。HCR产物吸附亚甲基蓝(MB)电活性分子，产生放大的电化学响应信号，实现对PKA活性的定量分析。该电化学传感器检测PKA的线性范围为10^-3～20 U/mL，检出限(S/N=3)为3×10^-4 U/mL。构建的电化学传感器具有良好的选择性、重现性和稳定性，可用于实际样品细胞裂解液中PKA的活性测定和蛋白激酶抑制剂的筛选及激酶相关药物的发现。     

固定化金属离子亲和发光二氧化硅纳米粒子的制备及其用于磷酸化蛋白免疫印迹标记

发展了一种能够识别磷酸化蛋白的固定化金属离子亲和发光二氧化硅纳米粒子用于免疫印迹(Western Blot)磷酸化蛋白的标记。首先通过反相微乳液Stöber方法合成了掺杂异硫氰酸荧光素硅烷化衍生物的发光二氧化硅(FITC@SiO₂)球形纳米粒子,粒子平均粒径为60 nm。然后通过共聚反应在FITC@SiO₂纳米粒子表面生成一层聚合物用于保护纳米粒子,并引入N,N-(双羧甲基)-L-赖氨酸功能基团用于螯合金属离子,从而实现固定化金属离子亲和作用。以α-酪蛋白作为实验模型,用高效液相色谱-质谱研究了螯合不同金属离子的发光纳米粒子对磷酸化蛋白的识别作用。结果表明,螯合了Ti⁴⁺金属离子的发光二氧化硅FITC@SiO₂纳米粒子对α-酪蛋白酶解液中的磷酸化肽段的富集作用最强。利用这种发光二氧化硅FITC@SiO₂纳米粒子对磷酸化肽段的特异性识别性能,可用于Western Blot实验中标记磷酸化蛋白的条带。结果显示,α-酪蛋白的电泳条带可以被亲和发光二氧化硅FITC@SiO₂纳米粒子标记,而作为对照的牛血清白蛋白则没有被标记。     

细管电泳-激光诱导荧光检测用于多个胞内蛋白激酶的抑制剂筛选和选择性评价

发展了一种基于毛细管电泳(CE)-激光诱导荧光(LIF)检测的多个细胞内源激酶的抑制剂平行筛选及选择性评价方法。CE高效的分离能力和LIF检测器的高选择性,使得同时测试多个胞内激酶的活性成为可能。共4种细胞系、3种特异性蛋白激酶底物肽、2种选择性蛋白激酶抑制剂和1种非选择性蛋白激酶抑制剂用于方法的建立。特异性底物肽与细胞裂解液混合后孵育,被其相应的激酶选择性地磷酸化,利用CE-LIF分离检测磷酸化产物和底物肽。同时测定一个抑制剂对几种蛋白激酶的抑制活性,用于评价抑制剂的选择性。与传统的单靶标筛选模式相比,这种基于细胞裂解液的多靶标筛选方法能提供更多的信息,更加高效,且细胞裂解液作为一种廉价的激酶来源大大降低了筛选成本。     

基于TMT10-plex等量标记结合SMOAC富集磷酸肽的定量磷酸化蛋白质组性能评价

探索并建立了一种快速、 简便且高通量定量磷酸化蛋白质组的策略, 即采用连续互补的磷酸化富集方法SMOAC(Sequential enrichment of metal oxide affinity chromatography)结合TMT(Tandem mass tag)标记技术定量磷酸化蛋白质组学. 以3例经紫草素处理的及3例正常的人肝癌 HepG2 细胞为实验材料, 经Trypsin酶解后的肽段用TMT10-plex试剂进行等量标记, 标记肽段先经TiO₂富集, 收集包含磷酸化肽段的洗脱液, 接着用次氮基三醋酸铁(Fe-NTA)对TiO₂的流穿液和清洗液进行二次富集, 再次收集包含磷酸化肽段的洗脱液. 整个实验流程做2组, 对其中一组的2次洗脱液分别分析, 另一组的2次洗脱液合并分析. 在SMOAC的2次洗脱液合并分析中鉴定到4263个磷酸化蛋白上超过13000条磷酸化肽, 富集特异性>97%, 其中被定量的磷酸化蛋白为3848个, 占总鉴定量的90%以上. 研究结果表明, SMOAC 能够有效提高磷酸化肽段的鉴定效率, 且能与TMT等量标记试剂结合, 实现对少量蛋白样品的磷酸化蛋白定量分析.     

TiO2纳米微粒对PPV发光性能的影响

采用溶胶凝胶法制备了一系列PPV/TiO₂纳米复合膜,探讨了TiO₂纳米微粒对PPV发光性能的影响.研究发现,这些复合膜的发光性质依赖于TiO₂/PPV的质量比,.在TiO₂/PPV的质量比为1/9时,复合膜中的TiO₂微粒对PPV的荧光具有猝灭作用;当TiO₂/PPV的质量比为1/1时,复合膜中的TiO₂对PPV的荧光具有增强作用.通过FT-IR,UV-Vis,FL光谱和TEM探讨了复合膜微结构与其发光性质的关系.     

Pt/H-TiO2催化剂制备及其甲醇电催化氧化性能

以四氯化钛为前驱体,采用水热法合成二氧化钛纳米棒（TiO₂,白色）,在纯H₂气氛,将其550 ^oC热处理2 h,即得有氧缺陷和Ti³⁺填隙原子的二氧化钛纳米棒（H-TiO₂,灰黑色）. 将Pt纳米粒子（~ 1.9 nm）负载于此两种二氧化钛纳米棒上,制得Pt/TiO₂和Pt/H-TiO₂催化剂. XRD和XPS测试表明,氢处理TiO₂晶型没有变化,仍属金红石型,但增加了Ti-OH表面物种. 电化学测试表明,H-TiO₂载体能够增强氧在Pt表面的吸脱附能力,从而提高其甲醇电催化氧化活性,Pt/H-TiO₂电极甲醇氧化峰电流密度为Pt/TiO₂电极的1.6倍、Pt/C电极的2.1倍.     

通过磁控溅射金属钛生长金红石型二氧化钛纳米片阵列应用于钙钛矿太阳能电池

本文首次通过磁控溅射方法,在FTO表面溅射一层Ti金属层,结合水热反应,原位生长TiO₂纳米片阵列（TiO₂ NSAs）. 经过退火处理,Ti金属层转变为致密的TiO₂层,因此基于此方法制得的金红石型TiO₂ NSAs与FTO基底具有很强的结合力. 与通过原子层沉积 (ALD) 以及悬涂 (SC) 法所得的另外两种TiO₂致密层生长的TiO₂ NSAs对比发现,基于本文所述方法制备的TiO₂ NSAs作为支架层的钙钛矿太阳能电池具有最佳性能. 上述结果主要是由于该TiO₂ NSAs无明显缺陷,并且在TiO₂ NSAs/TiO₂致密层/FTO界面接触很好. 值得注意的是,通过优化实验条件,基于此种TiO₂ NSAs的钙钛矿太阳能电池的最高光电转换效率可达11.82%.     

Nd2O3/TiO2光催化剂的光生羟基自由基和光活性

以硝酸钕和钛酸四正丁酯作为前驱体,采用溶胶-凝胶法制备了Nd₂O₃/TiO₂纳米光催化剂,并通过XRD和BET等手段进行了表征.以对苯二甲酸作为探针分子,结合化学荧光技术研究了光催化剂表面羟基自由基的生成;并以甲基橙为光催化降解反应模型化合物,考察了光催化剂的活性.测定了甲基橙在TiO₂和Nd₂O₃/TiO₂(1.0%)光催化剂上的吸附常数.结果表明:Nd₂O₃掺杂使TiO₂的粒径减小,比表面积增大;羟基自由基的生成速率越大,催化剂的催化活性越高.Nd₂O₃掺杂有利于反应底物在催化剂表面的吸附,Nd₂O₃的最佳掺入量为Nd/Ti(摩尔比)=1.0%.     

制备二氧化钛分枝纳米棒阵列结构以提高聚合物杂化太阳电池的性能

分别采用一步水热法和两步水热法在导电玻璃(FTO)上制备了二氧化钛(TiO₂)纳米棒(NR)阵列和TiO₂分枝纳米棒(B-NR)阵列。 利用低温化学浴沉积法(CBD)在TiO₂纳米棒阵列(NRA)和TiO₂分枝纳米棒阵列(B-NRA)基底上沉积Sb₂S₃纳米粒子(NPs)。 接着分别旋涂聚-3已基噻吩(P3HT)和2,2'7,7'-四-(二甲氧基二苯胺)螺芴(Spiro-OMeTAD)组装成TiO₂(NRA)/Sb₂S₃/P3HT/Spiro-OMeTAD和TiO₂(B-NRA)/Sb₂S₃/P3HT/ Spiro-OMeTAD为光活性层的杂化太阳电池。 结果表明,由TiO₂(NRA)/Sb₂S₃/P3HT/Spiro-OMeTAD复合膜结构组装的杂化太阳电池的光电转换效率(PCE)是2.92%,而由TiO₂(B-NRA)/Sb₂S₃/P3HT/Spiro-OMeTAD复合膜结构组装的杂化太阳电池的PCE提高到了4.67%。     

CdS/TiO2复合纳米微粒的原位合成及性质研究

采用一种新方法,在TiO₂表面原位合成CdS纳米微粒,并用红外光谱跟踪了CdS/TiO₂复合纳米微粒的形成过程.紫外吸收光谱研究表明TiO₂对CdS纳米微粒的形成有很好的稳定作用,荧光光谱研究结果表明,这种纳米异质结构有着良好的电荷分离.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.