核磁共振波谱法测定液体乳中的1,2-丙二醇

采用核磁共振氢谱(~1H NMR)、选择性一维全相关谱(1D-TOCSY)及定量核磁共振法(qNMR)对液态乳中的1,2-丙二醇进行了快速筛查及含量测定,并与气相色谱法的测定结果进行了比较。~1H NMR法以液态乳基质中1,2-丙二醇的甲基质子信号特征为初步定性标准,选择性一维全相关谱法以1,2-丙二醇的亚甲基和次甲基质子信号特征为精确定性标准。在定性检测基础上,采用定量核磁共振法以1,2-丙二醇δ 1.15处的质子峰为定量峰,3-(三甲基硅基)氘代丙酸钠(TMSP)δ 0.00处的峰为内标峰,测定了液体乳中1,2-丙二醇的绝对含量。方法的检出限为0.002 mg/mL,定量下限为0.006 mg/mL。实际样品测定结果显示,NMR法与气相色谱法的检测结果一致,且NMR法前处理简单,操作方便,专属性高,在提高检测效率的同时能够避免假阳性结果出现,非常适合实际检测中液体乳中1,2-丙二醇的批量、快速检测。     

一种新西地那非类似物的结构确证

采用核磁共振氢谱(1H NMR)、核磁共振碳谱(13C NMR)、梯度场氢氢相关化学位移相关谱(1H-1H COSY)、梯度场质子检测异核单量子化学位移相关谱(HSQC)、梯度场质子检测异核多重键化学位移相关谱(HMBC)等多种NMR分析方法,结合红外光谱分析和元素分析,确证了5-[2-丙氧基-5-(3,5-二甲基哌嗪-1-基磺基)苯基]-1-甲基-3-正丙基-1,6-二氢-7H-吡唑并[4,3-d]嘧啶-7-酮的分子结构,为鉴定西地那非类似物提供了重要依据。     

^(1)H和^(19)F核磁共振定量法测定诺氟沙星标准品的绝对含量EI北大核心CSCD

采用^(1)H和^(19)F核磁共振定量法测定诺氟沙星标准品的绝对含量。^(1)H核磁共振定量法以DMSO-d6为溶剂,诺氟沙星峰(δ7.9)为定量峰,马来酸峰(δ6.3)为内标峰。在脉冲程序zg30,采样时间4.09 s,延迟时间20 s,扫描次数为16的条件下采集氢谱。^(19)F核磁共振定量法以利培酮为内标物,诺氟沙星峰(δ-121.3)为定量峰,利培酮峰(δ-109.9)为内标峰。在脉冲程序zgfhigqn.2,延迟时间7 s,扫描次数为16的条件下采集氟谱。^(1)H和^(19)F核磁共振定量法测定结果接近,且与质量平衡法测定结果一致。核磁共振定量法可用来测定诺氟沙星绝对含量,快速、简单高效、且不需要对照品。     

海洋来源真菌Penicillim grisefulvum中桔霉素类化合物的分离及抗菌活性

以海洋来源青霉真菌Penicillim grisefulvum为研究对象,采用硅胶、C18柱和Sephadex LH-20凝胶柱层析等手段,从中分离获得3个桔霉素类化合物:7-methyl-penicitrinone A(1),citrinin(2)和penicitrinone A(3),其中化合物1为新化合物.通过一维核磁共振谱(1D NMR)、二维核磁共振谱(2D NMR)和高分辨质谱(HR-ESI-MS)对化合物1的平面结构和相对构型进行确定,并运用电子圆二色光谱(ECD)和量子化学计算方法确定了其绝对构型.抗菌活性测试结果表明,化合物1对副溶血性弧菌(Vibrio parahemolyticus)表现出了较强的抑制活性(MIC=0.8μmol/L),高于阳性对照药物环丙沙星的活性(MIC=1.3μmol/L).     

三亚甲基碳酸酯和己内酯生物可降解共聚物序列结构的二维核磁分析

以辛酸亚锡[Sn(Oct)2]为催化剂、乙二醇为引发剂,通过本体开环共聚,合成了己内酯(CAP)与三亚甲基碳酸酯(TMC)的共聚物。采用1H、13C核磁共振及同核二维相关谱(gCOSY)、13C-1H异核相关谱(gHSQC)和13C-1H异核远程相关谱(gHMBC)等二维核磁共振(2D NMR)技术,对所合成的聚合物进行了序列微结构表征,找出了聚合物分子链中序列连接方式,并完成了1H和13C NMR谱带的归属。     

核磁共振定量法测定利培酮含量

采用氢核磁共振定量法和氟核磁共振定量法测定利培酮含量。氢核磁共振定量法以利培酮δ7.29~7.35处质子峰为定量峰,马来酸δ6.02处为内标峰,在恒温300 K,采样时间4.0 s,弛豫延迟时间15 s,扫描次数为32次条件下采集氢谱。氟核磁共振定量法以4-溴-2-氟-乙酰苯胺为内标,在恒温300 K,谱宽12 500.0 Hz,中心频率-43 662.7 Hz下采集氟谱。测试结果显示,利培酮氢核磁共振定量法和氟核磁共振定量法的含量测定结果基本与质量平衡法的结果一致。因此,核磁共振法可用于利培酮绝对含量的测定,具有快速、简单、准确的优势。     

苯乙烯-马来酸酐共聚物的核磁共振分析

利用^1H NMR、^13C NMR及DEPT(无畸变极化转移增强)核磁共振技术研究了苯乙烯-马来酸酐共聚物(SMA)的序列结构和组成，并比较了几种核磁共振实验技术对分析SMA结果的准确性；实验表明^1H NMR是分析组成的简单、快速而有效的方法，DEPT谱进行序列结构计算准确度较高。     

定量核磁共振波谱法测定3种低聚果糖的含量北大核心CSCD

以蔗糖为内标物,氘代水为溶剂,采用氢-1核磁共振波谱法(1H-NMR)测定蔗果七糖、蔗果八糖、蔗果九糖等3种低聚果糖(FOS)的含量。优化后的1H-NMR参数如下:温度25℃,谱宽(2~14)×10^(-6),脉冲角度45°,脉冲延迟时间5 s,采样时间3 s,扫描次数16次。对蔗果七糖、蔗果八糖和蔗果九糖样品进行了仪器精密度和重复性试验,测定值的相对标准偏差(n=6)均小于0.50%。方法用于测定3种样品含量,测定结果与质量平衡法所得结果进行了比较,经F检验法评估,两种方法具有显著性差异。但由于定量核磁共振波谱法作为绝对含量的测定方法,仅需常见的化学品即可直接对待测成分进行测定,可以佐证质量平衡法的赋值结果。     

基于多重氢键组装的双杯冠合成及对铯离子的络合

合成了一种基于多重氧键组装形成的新型双杯冠化合物,利用核磁共振氢谱(1H NMR)和碳谱(13C NMR)以及高分辨质谱(ESI-HRMS)对组装前体分子结构进行了表征.通过一维和二维核磁共振氢谱(2D NOESY)研究了该双杯冠的的自组装结构,并采用核磁共振和紫外-可见光谱的方法测定了其对铯离子的络合.实验表明,通过氢键组装形成的双杯冠化合物,由于阻止了单杯冠分子内组装而限制了冠醚环构象改变,其萃取率由单杯冠的82％提高到96％.     

海洋来源真菌Penicillium pinophilum次级代谢产物中Azaphilones类化合物的分离及抗菌活性

采用硅胶、十八烷基硅烷键合硅胶填料(ODS)和Sephadex LH-20凝胶柱层析等手段从一株渤海来源真菌Penicillium pinophilum次级代谢产物中分离得到3个Azaphilones类化合物:Pinophilin G(1),Pinophilin B(2)和Sch 725680(3),其中,化合物1为新化合物.通过核磁共振波谱(1H NMR,13C NMR)、长程异核位移相关谱(HMBC)、NOSEY谱、异核位移相关谱(HSQC)和高分辨电喷雾质谱(HR-ESI-MS)确定了化合物1的平面结构和相对构型.通过比较实际电子圆二色谱(ECD)和量子化学计算方法计算的ECD光谱确定了化合物1的绝对构型.活性测试结果表明,化合物1和3均显示出不同程度的抗菌活性.     

ACD/Structure Elucidator: 20 Years in the History of Development

The first methods associated with the Computer-Assisted Structure Elucidation (CASE) of small molecules were published over fifty years ago when spectroscopy and computer science were both in their infancy. The incredible leaps in both areas of technology could not have been envisaged at that time, but both have enabled CASE expert systems to achieve performance levels that in their present state can outperform many scientists in terms of speed to solution. The computer-assisted analysis of enormous matrices of data exemplified 1D and 2D high-resolution NMR spectroscopy datasets can easily solve what just a few years ago would have been deemed to be complex structures. While not a panacea, the application of such tools can provide support to even the most skilled spectroscopist. By this point the structures of a great number of molecular skeletons, including hundreds of complex natural products, have been elucidated using such programs. At this juncture, the expert system ACD/Structure Elucidator is likely the most advanced CASE system available and, being a commercial software product, is installed and used in many organizations. This article will provide an overview of the research and development required to pursue the lofty goals set almost two decades ago to facilitate highly automated approaches to solving complex structures from analytical spectroscopy data, using NMR as the primary data-type.     

Exploiting the carboxylate chemical shift to resolve degenerate resonances in spectra of 13C-labelled glycosaminoglycans

Glycosaminoglycans (GAG) are important vertebrate extracellular matrix polysaccharides that comprise repeated units of an acidic and an N-acetylated sugar. The constituent acidic sugars are central to their biological functions, but have been largely inaccessible to NMR because the (1)H resonances overlap with those from other residues. Here, pulse sequences that address this failure are developed using (13)C-enriched oligosaccharides of the glycosaminoglycan, hyaluronan, as model systems. Two pulse sequences are presented that exploit the unique chemical shifts and scalar couplings present at the carboxylate moiety to filter out coherences from the N-acetylated sugars and produce simple spectra containing only resonances from the acidic sugars. The first sequence uses one-bond couplings to correlate the carboxylate carbon with the adjacent carbon and its directly attached proton, while the second sequence exploits a long-range coupling to correlate the carboxylate carbon with the anomeric proton and carbon of the same residue. In addition, inclusion of an isotropic mixing block into these sequences allows resonances from the otherwise degenerate ring protons to be resolved. Spectra from the hyaluronan tetra- and hexasaccharides show that all glucuronic acid (GlcA) residues can be resolved from one another, allowing nuclei to be assigned in a sequence-specific manner. However, in some spectra, resonances are observed at positions not predicted by spin-operator analysis, and simulations reveal that these additional magnetisation transfers result from strong-coupling. These experiments represent a foundation from which new structural and biochemical information can be obtained in a sequence-specific manner for the acidic sugar residues in hyaluronan and other glycosaminoglycans.     

Novel Monomeric Phenanthroline - Thallium(III) Complexes Multinuclear NMR Characterization in Organic Solvents

Thallium(III) complexes with nitrogen donor ligands constitute an interesting field in coordination chemistry. Phenanthroline is an extremely stiff organic ligand. The stability constants of its coordination compounds with Tl(III) have been investigated in aqueous solution by potentiometer1. 205Tl NMR technique has provided an effective method to study the thallium(III) solution chemistry. Thallium(III) coordination chemistry has attracted considerable attention recently for its ric…     

Aggregation kinetics and precipitation phenomena in poly(phenylisocyanide)

The preparation of N-phenyl-substituted poly(isocyanide) (N-ϕ-PIM) utilizing a Ni(II) catalyst in methanol yields a brown material having a number average molecular weight of about 2000. Analysis of this “as prepared” polymer indicates that a rigid rod structure is present in the derived solid. Dissolution of this “as prepared” N-ϕ-PIM in halocarbon solvents or THF apparently leads to unraveling of the helical polymer with subsequent aggregation and precipitation of materials that have different properties from the original. These processes have been investigated by NMR, GPC, and light-scattering techniques in THF and other solvents. UV spectroscopy has been utilized to follow the kinetics of the aggregation process in solution. X-ray diffraction (XRD) measurements have been employed to investigate the changes attendant with precipitation. An explanation of these observations is offered that implicates the uncoiling of the rigid rod helix as the most important step in defining subsequent physical and chemical properties of the ultimate amorphous polymer. © 1997 John Wiley & Sons, Inc.     

Proton NMR investigation of the local dynamics of PEO in PEO/PMMA blends

Longitudinal relaxation of proton magnetisation was used to characterize the molecular motions of PEO chains in compatible PEO (hydrogenated)/PMMA (deuterated) blends. Both the temperature and the PEO concentration, Φ, were varied. A maximum in the spin–lattice relaxation rate was observed and its properties were analyzed as a function of Φ. For Φ ≤ 0.50, the maximum is observed below the glass transition temperature of the blend; this shows that PEO chains dispersed in a matrix of PMMA remain highly mobile on a local scale even below T_g(Φ). A frequency–temperature correspondence procedure, applied to the measurements performed at two Larmor frequencies, 32 and 60 MHz, leads to a characteristic correlation time for PEO molecular motions. Its temperature dependence obeys a WLF free volume relation above the glass transition of the blends. The PEO free volume fraction and its thermal expansion are strongly reduced by the presence of the PMMA chains. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1095–1105, 1997     

NMR Crystallography Reveals Carbonate Induced Al-Ordering in ZnAl Layered Double Hydroxide

Layered double hydroxides (LDHs) serve a score of applications in catalysis, drug delivery, and environmental remediation. Smarter crystallography, combining X-ray diffraction and NMR spectroscopy revealed how interplay between carbonate and pH determines the LDH structure and Al ordering in ZnAl LDH. Carbonate intercalated ZnAl LDHs were synthesized at different pH (pH 8.5, pH 10.0, pH 12.5) with a Zn/Al ratio of 2, without subsequent hydrothermal treatment to avoid extensive recrystallisation. In ideal configuration, all Al cations should be part of the LDH and be coordinated with 6 Zn atoms, but NMR revealed two different Al local environments were present in all samples in a ratio dependent on synthesis pH. NMR-crystallography, integrating NMR spectroscopy and X-ray diffraction, succeeded to identify them as Al residing in the highly ordered crystalline phase, next to Al in disordered material. With increasing synthesis pH, crystallinity increased, and the side phase fraction decreased. Using ¹H−¹³C, ¹³C−²⁷Al HETCOR NMR in combination with ²⁷Al MQMAS, ²⁷Al-DQ-SQ measurements and Rietveld refinement on high-resolution PXRD data, the extreme anion exchange selectivity of these LDHs for CO₃²⁻ over HCO₃⁻ was linked to strict Al and CO₃²⁻ordering in the crystalline LDH. Even upon equilibration of the LDH in pure NaHCO₃ solutions, only CO₃²⁻ was adsorbed by the LDH. This reveals the structure directing role of bivalent cations such as CO₃²⁻ during crystallization of [M²⁺₄M³⁺₂(OH)₂]²⁺[A²⁻]₁⋅yH₂O LDH phases.     

Solution-State 2D NMR Spectroscopy of Mixtures HyperpolarizedUsing Optically Polarized Crystals

The HYPNOESYS method (Hyperpolarized NOE System), which relies on the dissolution of optically polarized crystals, has recently emerged as a promising approach to enhance the sensitivity of NMR spectroscopy in the solution state. However, HYPNOESYS is a single-shot method that is not generally compatible with multidimensional NMR. Here we show that 2D NMR spectra can be obtained from HYPNOESYS-polarized samples, using single-scan acquisition methods. The approach is illustrated with a mixture of terpene molecules and a benchtop NMR spectrometer, paving the way to a sensitive, information-rich and affordable analytical method.     

Novel Monomeric Phenanthroline—Thallium（Ⅲ） Complexes Multinuclear NMR Characterization in Organic Solvents

A novel complex of monomeric thallium (Ⅲ） with the nitrogen donor ligand phenanthroline (phen) has been prepared and characterized by multimuclear NMR(^1H,^13C,^205Tl). The three complexes exist in equilibria in DMSO and acetonitrile solution, which was proved by the ^205Tl NMR spectra. The ^1H and ^13C NMR spectra of tris-phen T1(Ⅲ） complex have been measured, where the spin-spin coupling between T1(I=1/2) and ^13C or ^1H signals were observed with the ^1H and ^13C NMR spectroscopy in acetonitrile. The coupling constants are presented and the chemical shifts of complexes are discussed in detail.     

Solid‐state 13C and 129Xe NMR study of poly(vinyl alcohol) and poly(vinyl alcohol)/lactosilated chitosan gels

Dry and hydrated poly(vinyl alcohol) (PVA) gels with 55% (a‐PVA) and 61% (s‐PVA) syndiotacticity and related PVA/lactyl chitosan (LC) blends have been investigated with ¹²⁹Xe and cross‐polarization/magic‐angle‐spinning ¹³C NMR techniques. Although the dry gels exhibit two broad ¹²⁹Xe resonances in the slow‐to‐intermediate exchange limit, both hydrated gels show three resonances. The corresponding dry blends exhibit two signals, the chemical shifts and line widths of which change with respect to those of pure PVA, whereas one (a‐PVA/LC) or two (s‐PVA/LC) signals appear in the spectra of the hydrated blends. A comparative analysis of the data demonstrates that LC rearranges the domains of the polymeric matrix in both the dry and hydrated blends according to the syndiotacticity of the PVA chains. Information on the molecular motions of the amorphous and swollen polymeric domains in the kilohertz range has been obtained from an analysis of the spin‐lattice relaxation times. These data indicate that the dynamics and arrangement of the PVA chains in the gels are strongly affected by their tacticity and the addition of the copolymer LC. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3123–3131, 2003     

Allyl endcapped polyethylene oxide crosslinkers and their use in superabsorbents

Several new crosslinkers have been synthesized for evaluation in superabsorbent polymers. These crosslinkers are allyl endcapped polyethylene glycols (PEG) of 200, 600, and 3400 molecular weight. A branched polyethylene oxide of 600 molecular weight, initiated with glycerin, was also synthesized as a trifunctional crosslinker. The allyl functionality was chosen because it is less reactive during radical polymerization than acrylate crosslinkers, an attribute that was necessary to achieve a more uniform gel network. A synthesis route was devised to make the crosslinkers in high purity and yield. The purity of the crosslinkers was determined by ¹³C NMR, liquid chromatography, and size exclusion chromatography. Gels that were produced with the allyl crosslinkers gave excellent soluble polymer levels and swelling characteristics. The mechanism of incorporation of the allyl functionality was determined to be exclusively vinyl polymerization rather than through hydrogen abstraction. This was determined using NMR spectroscopy, monitoring the polymerization of a model system consisting of acrylic acid and allylacetate. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 799–806, 1997