新型高效催化剂乙烯/1-丁烯气相齐聚和共聚制备弹性体及其结构与性能关系

用新型催化体系TiCl₄,Ti(OBu)₄/MgCl₂,SiO₂和ZnCl₂/醇/AlR₃催化乙烯与1-丁烯气相均聚及共聚,制得两种共聚物弹性体,发现新型催化剂体系具有独特的齐聚和原位共聚性能.采用¹³CNMR测定了共聚物链序列分布结构,观察到共聚单体在聚合物链中分布不均匀,存在较长的乙烯链段和较多的1-丁烯嵌段.产物DSC谱图表现出复杂的结晶熔融行为,存在多种结晶形态,出现熔融肩峰及双峰,与通常制得的LLDPE的结晶熔融行为有很大差别;结晶度和密度较低,并具有弹性体性质.     

乙烯/1-辛烯共聚物的研发和产业化进展

介绍了DOW化学、NOVA化学、DSM(荷兰帝斯曼)和Chevron Phillips等大公司以1-辛烯为共聚单体的聚乙烯生产工艺,主要包括溶液法和气相法工艺进展及各自使用的催化剂。重点介绍了世界各大化学公司生产的包括薄膜、滚塑、注塑等牌号在内的全密度乙烯/1-辛烯共聚聚乙烯产品的性能和应用,阐述了耐热聚乙烯PE-RT管材料和聚乙烯弹性体POE的用途、特点及相关牌号。最后,展望了乙烯/1-辛烯共聚产品的发展方向和前景,并对我国乙烯/1-辛烯共聚产品的现状及研发提出了建议。     

丙烯/1-丁烯和丙烯/乙烯无规共聚物的表征及性能研究

采用摩尔含量接近的两个单体乙烯和1-丁烯分别无规共聚聚丙烯样品,用三氯苯进行室温可溶物和不溶物的分离,采用凝胶渗透色谱、13C核磁共振波谱及热分析等方法对两种共聚聚合物及其分离物进行表征,探讨了乙烯和1-丁烯作为共聚单体对聚丙烯树脂结构和性能的影响.结果表明,与乙烯相比,1-丁烯更趋向于共聚在较长的聚丙烯分子链上,其结果导致丙烯/1-丁烯无规共聚聚丙烯的可溶物含量更低.同时,对两种无规共聚物结晶性能的差异以及对光学性能和动态力学性能的影响研究表明,如果共聚单体含量接近,丙烯/1-丁烯无规共聚物结晶度更高;透明制品雾度相同时,丙烯/1-丁烯无规共聚物的刚性更高.     

线型低密度聚乙烯的快速鉴定

采用对样品进行液氮淬火及溴化处理的制样方法,以期达到消除分子晶体场及分子链烯类端基对分析谱带的影响和干扰,结果表明:(1) 1 378 cm-1甲基对称变形振动谱带强而尖锐,和1 368 cm-1亚甲基面外摇摆振动谱带清晰分开,表明分子链上只存在一种单一的支链;(2)890 cm-1附近不存在表征长支链的甲基面内摇摆振动峰,只有772 cm-1附近存在表征乙基支链的亚甲基面内摇摆振动峰.成功地鉴定了以1-丁烯为共聚单体的线型低密度聚乙烯,方法简便、快速,为鉴定其他类的以烯烃为共聚单体的线型低密度聚乙烯(LLDPE)提供了重要思路.     

Et(Ind)_2ZrCl_2/MAO催化乙烯和ω-对甲苯基-α-烯烃共聚合的研究

使用Et(Ind)2ZrCl2/MAO催化剂催化乙烯和3种ω-对甲苯基-α-烯烃(对甲苯基-1-丙烯,4-对甲苯基-1-丁烯,6-对甲苯基-1-己烯)共聚,主要研究了共单体加入量对催化剂活性和所得共聚物性能的影响.4-对甲苯基-1-丁烯表现出最好的共聚性能.使用1H-NMR、13C-NMR、GPC和DSC对共聚物进行了表征.     

Ziegler-Natta催化乙烯/长链1-烯烃共聚合——长链1-烯烃的共聚活性

<正> 乙烯/1-烯烃共聚合是近年来活跃的研究课题之一,随1-烯烃种类不同及其在共聚物中含量的变化,共聚产物主要有橡胶弹性体(如乙丙胶)、线性低密度聚乙烯(LLDPE)等。研究结果表明,与短支链共聚单体相比,由长支链共聚单体获得的LLDPE具有更加优越的加工性能、整体韧性和抗撕裂性,由于侧基的位阻作用,长链1-烯烃参     

TiCl_4/MgCl_2催化丙烯/1-辛烯共聚合研究

本文用TiCl_4/MgCl_2-Al(i-Bu)_3催化剂进行丙烯/1-辛烯共聚合,研究发现引入少量共聚单体1-辛烯时,能提高丙烯的聚合活性。30℃时,测得共聚合竟聚率为r_丙=5.63,r_辛=0.32。共聚物的结晶度和己烷不溶物含量随其1-辛烯含量的增加而迅速下降。X射线衍射及~(13)C-NMR测定结果表明,共聚物的己烷可溶部分为非结晶的无规共聚物,己烷不溶部分是具有镶嵌着半个1-辛烯单体单元的长嵌段聚丙烯链结构的结晶性共聚物。     

以金属凝胶纤维为模板制备环境响应型共聚物一维纳米结构

分别以4-乙烯基吡啶(4VP)、丙烯酸(AAc)和N-异丙基丙烯酰胺(NIPAM)为共聚单体,以金属凝胶纤维为模板,通过自由基共聚合得到了具有环境响应性的共聚物一维纳米结构.采用红外光谱(FTIR)、流变仪和透射电子显微镜(TEM)等表征了共聚物一维纳米结构的组成、强度及微观形貌.结果表明,共聚单体与模板的配位能力强弱对所得到的共聚物一维纳米结构的产率、强度和形貌有很重要的影响.3种共聚物都具有相应的p H响应性和温度响应性,并且共聚单体含量越高,响应性越明显.     

本体共聚合制备丙烯/1-丁烯合金及表征

以球形高效负载的TiCl₄/MgCl₂/邻苯二甲酸二异丁酯(DIBP)为催化剂, 采用本体聚合方法进行丙烯与1-丁烯共聚合研究. 考察了共单体效应对共聚活性及聚合物立构规整性的影响; 表征了共聚物的结构. 结果表明, 随着1-丁烯/丙烯投料比的增加, 聚合活性呈先升高后降低的趋势, 在1-丁烯/丙烯摩尔投料比为0.26条件下聚合活性达到最高, 并随着共聚物中1-丁烯含量的增加, 共聚物的熔点明显下降, 分子量降低, 分子量分布变窄, 同时共聚物力学性能有明显提高, 透明度逐渐增加.     

1—辛烯／戊烯—4—醇—1共聚物的合成和表征

合成了极性单体4-戊烯氧基三甲基硅烷.在络合Ⅱ型TiCl_(3)/Al(i-Bu)_3催化体系下,该单体与1-辛烯共聚.进一步酸化水解,得到了不同羟基含量的1-辛烯、戊烯-4-醇-1共聚物.用元素分析、红外光谱、核磁共振谱对其进行表征.探讨了聚合条件对共聚反应的影响,测得竞聚率为r_1(辛)=2.28士0.15,r_2(极)=0.47土0.05.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.