首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 156 毫秒
1.
不同软段长度PBT-co-PBS-b-PEG嵌段共聚物的合成与表征   总被引:6,自引:0,他引:6  
用熔融缩聚法合成了一系列具有不同软段长度的聚对苯二甲酸丁二酯 (PBT) co 聚丁二酸丁二酯(PBS) b 聚乙二醇 (PEG)嵌段共聚物 (PTSG) ,考察了PEG分子量 (Mn(PEG) )及PBS摩尔分数 (MPBS)对材料性能的影响 实验表明 ,随Mn(PEG)增加 ,缩聚反应时间延长 ,所得产物分子量均呈较为对称的单峰分布 ,多分散性指数小于 2 0 硬段序列结构分析显示 ,随MPBS 增加 ,PBT平均序列长度减小 ,而PBS平均序列长度增加 ,二者呈无规分布 .受组成及硬段平均序列长度变化影响 ,材料内部呈微观相分离状态 ,DSC曲线上可分别观察到软、硬段熔点及玻璃化转变温度 ;硬段熔点及结晶度随MPBS升高而降低 ,主要是受其平均序列长度变化及共晶作用所致 .材料断裂延伸率及降解速率均随Mn(PEG)及MPBS增加而增加 ,可见提高软段长度及降低硬段结晶度等均能有效改善共聚物高分子链的柔韧性及亲水性 ,赋予共聚物更好的降解性能 .  相似文献   

2.
张勇  冯增国  刘凤香  张爱英 《化学学报》2002,60(12):2225-2231
用熔融缩聚法合成了一系列基于聚对苯二甲酸丁二醇酯(PBT)、聚丁二酸丁 二醇酯(PBS)及聚乙二醇(PEG)的嵌段共聚物(PBT-co-PBS/PEG)。^1H NMR结 构分析显示,软段摩尔百分含量恒为20%。随组成中PBS含量增加,软段质量百分 含量略微升高,硬段PBT平均序列长度由2.80逐步减至1.23,PBS平均序列长度由1. 27逐步增加到4.76,无规度在1.1附近,两者呈无规分布。受组成及硬段平均序 列长度变化影响,材料内部呈微观相分离状态,DSC热分析曲线上可分别观察到软 、硬段熔点(Tm,s,Tm,h)及玻璃化转变温度(Tg,s,Tg,h)。硬段熔点及结晶度随 PBS含量升高而降低,在50-60mol%处达到最小值,则是PBS与PBT二者间形成共晶 所致。力学性能测试及水解降解实验表明,将脂肪族聚酯PBS引入PEGT/PBT共聚体 系,可赋予高分子链更好的柔韧性及亲水性,加快降解速率。  相似文献   

3.
制备了高分子量的聚丁二酸丁二醇酯,并通过与对苯二甲酸二甲酯的无规共聚调节其生物可降解性及力学性能,得到了具有优良机械性能和不同生物降解速度的一系列共聚物,并对共聚物序列结构、热力学性能、结晶性进行了研究.结果表明,该共聚物为无规共聚物,PBS和PBT分别结晶.共聚物的结晶熔点符合无规共聚物的Flory方程.  相似文献   

4.
α,α-二甲基-β-丙内酯(即PVL)的嵌段共聚近年来受到人们的重视。1979年G.Broze等发现只有α,β或γ位带有极性基团或双键的羧端基才可以进行嵌段共聚,否则只能引发均聚。但他们的实验都是以四正丁铵做为反离子的。我们改用其它季铵反离子发现可以改变嵌段效率,同时发现未嵌段的双羧戊酰端基的聚1,2-丙二醇己二酸酯(PPA)上带有微量的酸酐键,因而提出引发PVL时同时存在烷氧与酰氧开环两种引发机制,前者导致嵌段共聚,后者则导致均聚。本文进一步研究了不同季铵与冠醚络合钾反离子对嵌段效率的影响。  相似文献   

5.
生物降解PBS聚醋的改性研究进展   总被引:1,自引:0,他引:1  
聚丁二酸丁二醇酯(PBS)是一种具有良好生物降解性的聚酯,本文简述了PBS的基础物性和力学性能,综述了各种改善PBS生物降解性、生物相容性、热学和力学性能的方法,重点介绍了通过共聚、共混等方法对PBS进行改性的研究进展.  相似文献   

6.
摘要合成了一系列聚丁二酸/甲基丁二酸丁二醇共聚酯(PBSM), 利用DSC, 1H NMR和X射线衍射等方法对共聚物组成、 热学性能、 结晶性能、 等温结晶行为进行了研究. 结果表明, 引入甲基丁二酸共聚单元较为显著地改变了聚丁二酸丁二酯(PBS)的热学性能, 利用Hoffman\|Weeks方程得到的共聚物平衡熔点随共聚物的组分含量增加而降低, 玻璃化转变温度亦有所降低, 熔点则符合无规共聚物的Flory方程. 此外, 利用Avrami方程分别研究了均聚物PBS及共聚物PBSM-20的等温结晶行为, 结果表明, 在所研究的温度范围内, 聚酯结晶速率随温度升高而降低, PBS和PBSM\-20的Avrami指数分别介于2.8~3.0和2.7~3.0之间, 结晶方式为三维生长异相成核, 而X射线衍射测试结果表明晶体结构几乎不变.  相似文献   

7.
合成了一系列聚丁二酸/苯基丁二酸丁二醇共聚酯(PBSBS),利用DSC、1H-NMR和X射线等测试手段对共聚物组成、热力学性能、结晶性能、等温结晶行为进行了表征和研究.结果表明,含苯基的共聚单元的引入显著改变了聚丁二酸丁二醇酯(PBS)的热力学性能4,利用Hoffman-Week曲线得到的共聚物平衡熔点随共聚组分含量的增加显著降低,玻璃化转变温度则明显升高,结晶熔点符合无规共聚物的Flory方程.此外,利用Avrami方程对均聚物PBS以及共聚物PBSBS-10分别进行了等温结晶行为研究,结果表明共聚使结晶速率降低,PBS和PBSBS-10的Avrami指数分别介于2.8~3.0和2.7~2.9之间,结晶方式为三维生长异相成核,X射线测试结果表明共聚不影响晶体结构.  相似文献   

8.
研究了含有酚羟基的小分子添加剂双酚A(BPA)对可生物降解高分子材料聚丁二酸丁二酯(PBS)的结晶、熔融及玻璃化转变的影响.研究表明在PBS中添加BPA,使PBS的结晶能力下降、熔点降低,这源于PBS与BPA通过氢键相互作用形成复合物,破坏了PBS的规整结晶结构.动态力学热分析表明,复合物的玻璃化转变温度随着BPA含量...  相似文献   

9.
HDI作为扩链剂合成含PLLA和PBS链段的聚酯氨酯   总被引:3,自引:0,他引:3  
以数均分子量为6350g/mol端羟基聚L-乳酸(PLLA-OH)与10500g/mol端羟基聚丁二酸丁二酯(PBS-OH)为预聚物,六亚甲基二异氰酸酯(HDI)为扩链剂,通过熔融反应制备了分子量高达30×104g/mol的可完全生物降解聚酯氨酯(PEU).研究了异氰酸根(NCO)与羟基比例对扩链反应的影响.结果表明,当[NCO]/[OH]=1∶1时,扩链效果最好,PEU分子量最大;PEU分子量随着预聚物中PBS含量增大而提高.通过核磁共振谱(1H-NMR)确定了PEU的结构与组成,并对聚酯氨酯进行了凝胶渗透色谱(GPC)、差示扫描量热(DSC)、热重分析(TGA)以及拉伸性能测试.DSC结果显示,扩链后PEU的结晶主要由PBS链段产生,而PLLA链段几乎不结晶;TGA结果表明,PEU的热降解分两步进行,第一步为PEU中PLLA链段的热降解,第二段为其中PBS链段的降解;拉伸测试结果表明,PBS与PLLA的共聚能够制备拉伸强度与断裂伸长率优异的聚合物材料.  相似文献   

10.
PBS基生物降解材料的研究进展   总被引:20,自引:0,他引:20  
PBS(聚丁二酸丁二醇酯 )是一种具有良好生物降解性的聚酯塑料。本文简述了PBS的基本特性、降解机理和制备方法 ,对各种PBS基生物降解材料的特性进行了分析 ,介绍了PBS基生物降解材料的研究进展  相似文献   

11.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

12.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

13.
N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).  相似文献   

14.
An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y1 and Y2. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.  相似文献   

15.
In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.  相似文献   

16.
Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.  相似文献   

17.
用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.  相似文献   

18.
19.
A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu0 as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than CuI in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).  相似文献   

20.
(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C60, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号