Crosslinking reaction in the cationic polymerization of 1, 3-pentadiene

The cationic polymerization of 1,3-pentadiene (PD) initiated by AlCl_3 in n-hexane was carried out. Effects of arenes, alkyl halides and ethers on the gel formation resulting from crosslinking reaction were investigated. The erosslinking was reduced by various arenes through a chain transfer mechanism. Alkyl halides such as tert-butyl chloride and allyl chloride could complex with AlCl_3 to generate an initiating system giving rise to a gel-free polymerization, while benzyl chloride reduced the formation of gel by chain transfer. Ethers exerted two effects on the polymerization system: giving a complex initiating system with AlCl_3 to produce a relatively high molecular weight polymer, or reducing crosslinking by lowering activity of carbocations.     

Selective catalytic methanation of CO in hydrogen-rich gases over Ni/ZrO2 catalyst

Ni/ZrO2 catalysts were prepared by the incipient-wetness impregnation method and were investigated in activity and selectivity for the selective catalytic methanation of CO in hydrogen-rich gases with more than 20 vol% CO2. The result showed that Ni loadings significantly influenced the performance of Ni/ZrO2 catalyst. The 1.6 wt% Ni loading catalyst exhibited the highest catalytic activity among all the catalysts in the selective methanation of CO in hydrogen-rich gas. The outlet concentration of CO was less than 20 ppm with the hydrogen consumption below 7%, at a gas-hourly-space velocity as high as 10000 h-1 and a temperature range of 260 °C to 280 °C. The X-ray diffraction （XRD） and temperature programmed reduction （TPR） measurements showed that NiO was dispersed thoroughly on the surface of ZrO2 support if Ni loading was under 1.6 wt%. When Ni loading was increased to 3 wt% or above, the free bulk NiO species began to assemble, which was not favorable to increase the selectivity of the catalyst.     

PREPARATION OF HIGHLY BRANCHED POLYETHYLENE WITH ACENAPHTHENEDIIMINE NICKEL CHLORIDE/DIETHYLALUMINUM CHLORIDE CATALYST

The homogeneous catalyst system [ArN = C(Nap)- C(Nap)= Nar]NiCl2 (Nap = 1,8-naphthdiyl, Ar = 2,6-diisopropylphenyl)/AlEt2Cl has been prepared and examined for ethylene polymerization. Polymerization conditions such as cocatalyst, Al/Ni molar ratio and polymerization temperature (Tp) have a great effect on catalytic activity and properties of polyethylenes (PE). The activity of 5.1 × 105g PE/mol Ni. H was obtained by the catalyst, activated with AlEt2Cl at 120 of Al/Ni ratio and 30℃. Especially, Tp had a pronounced influence on branches and molecular weight of PE. Branching degree of PE increased with increasing temperature whereas their molecular weight decreased correspondingly. At Tp lower than about 70℃, the resultant PE was an elastic material. When Tp was higher than 70℃, the product was a viscous oil. The resultant PE was confirmed by 13C-NMR to contain significant amounts of not only methyl but also ethyl, propyl, butyl,amyl, and longer branches (longer than six carbons). According to gel permeation chromatographic measurement, the weightaverage molecular weights of the polymers obtained ranged from 3.6 × 103 to 2.3 × 105.     

Synthesis,Crystal Structure,and Catalytic Performance of 2,6-Bis[1-（2,4,6-trimethylphenylimino）ethyl]pyridine Nickel（II） Complex

A novel nickel（II）-complex Ni[L]Cl2-CH3CN（1） containing the tridentate ligand 2,6-bis[1-（2,4,6- trimethylphenylimino）ethyl]pyridine（L） has been synthesized. The crystal structure of complex 1 was determined by single crystal X-ray diffraction analysis. The catalytic activity of complex 1 for the polymerization of ethylene was studied under activation with methylaluminoxane（MAO）.     

POLYMER-SUPPORTED RARE EARTH CATALYSTS FOR STYRENE POLYMERIZATION

The neodymium complex supported on styrene-maleic anhydride copolymer (SMA·Nd) has been prepared for the first time and found to be a highly effective catalyst for the polymerization of styrene. The SMA·Nd polymeric complex is characterized by IR and its catalytic activity, and the polymerization features have been investigated in comparison with that of the conventional Ziegler-Natta catalysts. When [Nd]=1×10~(-3) mol/L, [M]=5mol/L, Al/Nd=170(mol ratio) and CCl_4/Nd=50(mol ratio), the polymerization conversion of styrene gets to 51.6% in six hours, and the catalytic activity reaches 1852 gPS/gNd, which is much higher than that of conventional rare earth catalysts. The polymerization reaction has an induction period and shows some characteristics of chain polymerization. The polymerization rate is the first order with respect to the concentration of styrene monomer. Addition of FeCl_3 does not suppress the polymerization.     

“LIVING”/CONTROLLED RADICAL POLYMERIZATION OF ETHYL METHYLACRYLATE WITH 2,2’-AZOBISISOBUTYRONITRILE/FERRIC CHLORIDE/TRIPHENYLPHOSPHINE INITIATION SYSTEM

"Living"/controlled radical polymerization of ethyl methacrylate (EMA) was carried out with a 2,2'-azobisisobutyronitrile (AIBN)/ferric chloride (FeCl_3)/triphenylphosphine (PPh_3) initiation system at 85℃. Thc numberaverage molecular weight (M_n) increases linearly with monomer conversion and the rate of polymerization is first order withrespect to monomer concentration. The M_w of PEMA ranges from 3900 to 17600 and the polydispersity indices are quitenarrow (1.09～1.22). The conversion can reach up to～100% and M_w of the polymers obtained is close to that designed. Thepolymerization mechanism belongs to the reverse atom transfer radical polymerization (ATRP). The polymer was end-functionalized by chlorine atom, which acts as a macroinitiator to proceed extension polymerization in the presence ofCuBr/bipy catalyst system via an ATRP process. The presence of ω-chlorine in the PEMA obtained was identified by ~1H-NMR spectrum.     

Propylene Dimerization by（η^5—C9H7）2 Nickel（Ⅱ）Catalytic System

The catalytic performance of Ni(η^5-Ind)2 complex in the dimerization of propylene was studied in combimation with an organoaluminum co-catalyst,eventually in the presence of a phosphine ligand.The effects of the type of aluminum co-catalyst and its relative amount,the nature of phosphine ligand and P/Ni ratio as well as the reaction temperature were examined.The results indicated that the nickel precatalyst exhibited high productivity for the propylene dimerization together with organoaluminum.It was likely to strongly modify the reactivity in the catalytic sytem when using phosphine ligand as additives,especially at the reaction temperature below 0℃.The catalytic system based on Ni(η^5-Ind)2 complex displaed an extremely high productivity(TOF up to 16900h^-1)and a good regioselectivity to 2,3-dimethylbutenes (2,3-DMB) in dimers(66.4%)under proper reaction parameters.     

Ring-opening polymerization of L-lactide with rare earth aryloxides substituted by various alkyl groups

<正>Rare earth aryloxides substituted by various alkyl groups[Ln(OAr)_3]such as methyl,isopropyl and tertbutyl,were used as single component catalysts to affect ring-opening polymerization of L-lactide(LLA).The catalytic activity, polymerization characteristics,polymerization kinetics and the mechanism were studied.It was found that the catalytic activity of rare earth aryloxides is influenced by both the structure and the number of alkyl groups on the phenyl ring.The stronger the electron-donation ability of the alkyl group,the higher the catalytic activity will be.An increase in the number of the substitute group will result in a higher catalytic activity.Lanthanum tris(2,4,6-tri-tert-butylphenolate)[La(OTTBP)_3] exhibits the highest activity among all lanthanum aryloxides.According to the ~1H-NMR data,it was proposed that the LLA polymerization proceeded via a coordination-insertion mechanism involving cleavage of acyl-oxygen bond of the lactide.     

原子簇NixFe和NiFex(x=1-5)电子性质的DFT研究

More than one hundred models were designed to reflect the local structure and electronic property of Ni-Fe amorphous alloys. After calculating by DFF method, a series of configurations of clusters NixFe and NiFex （x = 1 - 5） were gained. The configurations, which possessed the lowest energies and non-imaginary frequencies, were considered the most stable optimized structures. The catalytic activity, charge and magnetic properties were analyzed and discussed. The different Fe content changed the catalytic properties of clusters through altering the value of Fermi level of every cluster. However the density of state （DOS） nearby Fermi level and average 3d orbital population of atom Ni, which were also important properties related to the catalytic activation, were little changed. Based on the Fermi level, the activity of catalyst toward hydrogenation reaction would be considered best when the ratio of Ni to Fe was close to 1. The Fermi level of clusters was far distant to the level of nitrogen in singlet state. It would be the reason why the reaction condition in ammonia synthesis and nitrogen fixation process was rigorous. When Fe atom contents were higher than 75% （NiFe3）, the electrons transferred from atom Fe to Ni, but when the ratio was decreased, the transfer was reversed. The ratio of atoms of local structure also played an important role in the aspect of electron transition. On the average 3d orbital population of atom Fe, the average magnetic moments of Fe atoms in clusters were calculated. When Fe atom contents were 50% nearly, the average magnetic moment achieved the highest point.     

Effect of CeO2 on the catalytic performance of Ni/Al2O3 for autothermal reforming of methane

The effect of promoter Ce on the catalytic performance of Ni/Al2O3 catalyst for autothermal reforming of methane to hydrogen was investigated. The catalysts were characterized by X-ray diffraction （XRD）, temperature-programmed reduction （TPR）, and X-ray photoelectron spectroscopy （XPS）. The results indicated that the catalytic performance of the catalysts was improved with the addition of Ce. Ni/Ce30Al70Oδ showed the highest CH4 conversion in operation temperatures ranging from 650 ℃ to 850 ℃. At the same time, the decrease in H2/CO ratio with increasing reaction temperature was consistent with the fact that water-gas shift reaction was thermodynamically unfavorable at higher temperatures. The XRD result indicated that adding Ce to Ni/Al2O3 catalyst prevented the formation of NiAl2O4 and facilitated the formation of NiO. The formation of NiO increased the number of active sites, resulting in higher activity. Comparing the TPR profiles of Ni/Ce30Al70Oδ with Ni/Al2O3, it could be clearly observed that with the addition of Ce, the total reduction peak areas in the middle and low temperatures increased. It was most probably that the addition of Ce inhibited the stronger interaction between Ni and Al2O3 to form the phase of NiAl2O4, and favored the formation of the strong interaction between NiO species and CeO2. Therefore, the addition of Ce to the Ni/Al2O3 catalyst increased the active surface that promoted the activity of the catalyst.     

High polymerization of methyl methacrylate with organonickel/MMAO systems

A series of nickel complexes, including Ni(acac)₂, (C₅H₅)Ni(η³‐allyl), and [NiMe₄Li₂(THF)₂]₂, that were activated with modified methylaluminoxane (MMAO) exhibited high catalytic activity for the polymerization of methyl methacrylate (MMA) but showed no catalytic activity for the polymerization of ethylene and 1‐olefins. The resulting polymers exhibited rather broad molecular weight distributions and low syndiotacticities. In contrast to these initiators, the metallocene complexes (C₅H₅)₂Ni, (C₅Me₅)₂Ni, (Ind)₂Ni, and (Me₃SiC₅H₄)₂Ni provided narrower molecular weight distributions at 60 °C when these initiator were activated with MMAO. Half‐metallocene complexes such as (C₅H₅)NiCl(PPh₃), (C₅Me₅)NiCl(PPh₃), and (Ind)NiCl(PPh₃) produced poly(methyl methacrylate) (PMMA) with much narrower molecular weight distributions when the polymerization was carried out at 0 °C. Ni[1,3‐(CF₃)₂‐acac]₂ generated PMMA with high syndiotacticity. The NiR(acac)(PPh₃) complexes (R = Me or Et) revealed high selectivity in the polymerization of isoprene that produced 1,2‐/3,4‐polymer at 0 °C exclusively, whereas the polymerization at 60 °C resulted in the formation of cis‐1,4‐rich polymers. The polymerization of ethylene with Ni(1,3‐tBu₂‐acac)₂ and Ni[1,3‐(CF₃)₂‐acac]₂ generated oligo‐ethylene with moderate catalytic activity, whereas the reaction of ethylene with Ni(acac)₂/MMAO produced high molecular weight polyethylene. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4764–4775, 2000     

Synthesis and structure of indenylnickel(II) chlorides bearing free N-heterocyclic carbene ligands and their catalysis for styrene polymerization

The reaction of (R-Ind)₂Ni (Ind = C₉H₇, indenyl) with an equivalent of a bulky aryl-substituted imidazolium salt in CH₂Cl₂/THF at 45 °C results in the corresponding N-heterocyclic carbene (NHC) indenylnickel(II) chloride of the type (R-Ind)Ni(L)Cl [R = 1-H, L = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (IPr), 1; R = 1-Me, L = IPr, 2] in high yield. Complexes 1 and 2 were characterized by elemental analysis, NMR spectroscopy and X-ray crystallography. The resulted NHC indenylnickel(II) complexes are capable of polymerizing styrene in the presence of NaBPh₄ to give atactic polystyrene with M_n values in the range of 10⁴. The present studies show a close relationship between the structure and catalytic activity of the NHC indenylnickel(II) halides (including the previously reported indenylnickel(II) halides bearing alkyl-substituted NHC ligands), and complex 2 shows the highest catalytic activity. In comparison with its phosphine analogue (1-Me-Ind)Ni(PPh₃)Cl, complex 2 shows significant improvements in stability and catalytic performance.     

Nickel(II) N‐Benzyl‐N‐methyldithiocarbamato Complexes as Precursors for the Preparation of Graphite Oxidation Accelerators

The nickel(II) N‐benzyl‐N‐methyldithiocarbamato (BzMedtc) complexes [Ni(BzMedtc)(PPh₃)Cl] ( 1 ), [Ni(BzMedtc)(PPh₃)Br] ( 2 ), [Ni(BzMedtc)(PPh₃)I] ( 3 ), and [Ni(BzMedtc)(PPh₃)(NCS)] ( 4 ) were synthesized using the reaction of [Ni(BzMedtc)₂] and [NiX₂(PPh₃)₂] (X = Cl, Br, I and NCS). Subsequently, complex 1 was used for the preparation of [Ni(BzMedtc)(PPh₃)₂]ClO₄ ( 5 ), [Ni(BzMedtc)(PPh₃)₂]BPh₄ ( 6 ), and [Ni(BzMedtc)(PPh₃)₂]PF₆ ( 7 ). The obtained complexes 1 – 7 were characterized by elemental analysis, thermal analysis and spectroscopic methods (IR, UV/Vis, ³¹P{¹H} NMR). The results of the magnetochemical and molar conductivity measurements proved the complexes as diamagnetic non‐electrolytes ( 1 – 4 ) or 1:1 electrolytes ( 5 – 7 ). The molecular structures of 4 and 5· H₂O were determined by a single‐crystal X‐ray analysis. In all cases, the Ni^II atom is tetracoordinated in a distorted square‐planar arrangement with the S₂PX, and S₂P₂ donor set, respectively. The catalytic influence of selected complexes 1 , 3 , 5 , and 6 on graphite oxidation was studied. The results clearly indicated that the presence of the products of thermal degradation processes of the mentioned complexes has impact on the course of graphite oxidation. A decrease in the oxidation start temperatures by about 60–100 °C was observed in the cases of all the tested complexes in comparison with pure graphite.     

Fixation of Metallo Nitrile Ylides and Metallo Nitrile Imines as Ligands in Transition Metal Complexes [1]

1,3‐Dipoles of the type metallo nitrile ylide and metallo nitrile imine were prepared by mono‐α‐deprotonation of CH‐acidic {[W(CO)₅CHCH₂PPh₃]PF₆, M(CO)₅CNCH₂CO₂R (M = Cr, W; R = Me, Et), [Pt(Cl)(CNCH₂CO₂Et)(PPh₃)₂]BF₄} and NH‐acidic isocyanide complexes (Cr(CO)₅CNNH₂) and were stabilized by coordination to a second transition metal complex fragment {Cr(CO)₅, [M(CO)₅]⁺ (M = Mn, Re), [FeCp(CO)₂]⁺, [Pt(Cl)(PR₃)₂]⁺ (R = Et, Ph)}. All dinuclear products 1 – 7 , 10 , and 11 are neutral species except [(Ph₃P)₂(Cl)Pt{μ₂‐CNCH(CO₂Et)}Pt(Cl)(PPh₃)₂]BF₄ ( 8 ). Complex (OC)₅W{μ₂‐CNCH(CO₂Et)}Pt(Cl)(PEt₃)₂ ( 5b ) was characterized by X‐ray diffraction. Twofold deprotonation/platination to give (OC)₅Cr{μ₃‐CNC(Ph)}[Pt(Cl)(PPh₃)₂]₂ ( 9 ) was achieved in the case of Cr(CO)₅CNCH₂Ph.     

Simultaneous control of the stereospecificity and molecular weight in the ruthenium‐catalyzed living radical polymerization of methyl and 2‐hydroxyethyl methacrylates and sequential synthesis of stereoblock polymers

The stereospecific living radical polymerizations of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) were achieved with a combination of ruthenium‐catalyzed living radical and solvent‐mediated stereospecific radical polymerizations. Among a series of ruthenium complexes [RuCl₂(PPh₃)₃, Ru(Ind)Cl(PPh₃)₂, and RuCp*Cl(PPh₃)₂], Cp*–ruthenium afforded poly(methyl methacrylate) with highly controlled molecular weights [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.08] and high syndiotacticity (r = 88%) in a fluoroalcohol such as (CF₃)₂C(Ph)OH at 0 °C. On the other hand, a hydroxy‐functionalized monomer, HEMA, was polymerized with RuCp*Cl(PPh₃)₂ in N,N‐dimethylformamide and N,N‐dimethylacetamide (DMA) to give syndiotactic polymers (r = 87–88%) with controlled molecular weights (M_w/M_n = 1.12–1.16). This was the first example of the syndiospecific living radical polymerization of HEMA. A fluoroalcohol [(CF₃)₂C(Ph)OH], which induced the syndiospecific radical polymerization of MMA, reduced the syndiospecificity in the HEMA polymerization to result in more or less atactic polymers (mm/mr/rr = 7.2/40.9/51.9%) with controlled molecular weights in the presence of RuCp*Cl(PPh₃)₂ at 80 °C. A successive living radical polymerization of HEMA in two solvents, first DMA followed by (CF₃)₂C(Ph)OH, resulted in stereoblock poly(2‐hydroxyethyl methacrylate) with syndiotactic–atactic segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3609–3615, 2006     

Amino alcohol additives for the fast living radical polymerization of methyl methacrylate with RuCl2(PPh3)3

A series of amino alcohols [e.g., R₂N (CH₂)_n OH (R = Me, Et, etc.; n = 2, 3, or 4)] were examined as additives for rate enhancement and finer reaction control in the living radical polymerization of methyl methacrylate with RuCl₂(PPh₃)₃. In general, these additives were more effective in acceleration than the corresponding amines as well as mixtures of an amine and a nonsubstituted alcohol, diamines, or diols. For example, 2-(diethylamino)ethanol significantly accelerated the polymerization (23 h, 91% at 60 °C) and gave polymers with narrower molecular weight distributions [weight-average molecular weight/number-average molecular weight (M_w/M_n) = 1.23], with respect to the system without the additive (550 h, 95%, M_w/M_n ∼ 2.0 at 80 °C; no polymerization at 60 °C). ¹H NMR analysis showed the interaction between the amino alcohols and RuCl₂(PPh₃)₃, which apparently formed a more active catalyst. Amino alcohols were also effective in Ru(Ind)Cl(PPh₃)₂-catalyzed systems (96% in 8 h at 80 °C). High-molecular-weight poly(methyl methacrylate) (M_n ∼ 1.1 × 10⁵) was synthesized with the RuCl₂(PPh₃)₃/2-(diethylamino)ethanol system, in which the polymerization reached 97% conversion in 4 h. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3597–3605, 2003     

Cationic Complexes of Monovalent Nickel as Catalysts for Styrene Polymerization

The interaction of the [Ni(PPh₃)₃]BF₄ complex with styrene and the products of styrene conversion in the polymerization reaction were studied by EPR and ¹³C NMR spectroscopy. The structure of the σ-carbocationic complex of Ni(I) formed by the interaction of styrene with the [Ni(PPh₃)₃]BF₄ cationic phosphine complex of Ni(I) was characterized in detail. It was found that the reaction of styrene polymerization occurred with the participation of the coordination center of the σ-carbocationic complex (coordination catalysis), whereas the reaction of telomerization occurred with the participation of the cationic center of this complex (ionic catalysis). The resulting polymer contained active terminal double bonds; it is a promising macromonomer for the synthesis of grafted copolymers. The discovered capacity of alcohols to undergo nucleophilic addition to a growing polymer chain offers strong possibilities for preparing functional polymers and block copolymers.     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148     

Indolyl Phosphine Nickel(II) Fluorido Complexes: Synthesis and Intermediates in Suzuki–Miyaura Cross-Coupling Reactions

The C−F bond activation of pentafluoropyridine and 2,3,5,6-tetrafluoropyridine at [Ni(cod)₂] (cod=1,5-cyclooctadiene) in the presence of the phosphine PPh₂(Ind) (Ind=3-methyl-2-indolyl) led to the formation of the nickel(II) fluorido bis(phosphine) complexes trans-[Ni(F)(2-C₅NF₄){PPh₂(Ind)}₂] and trans-[Ni(F)(2-C₅HNF₃){PPh₂(Ind)}₂]. The complexes are characterized by the presence of intramolecular hydrogen bonds between the NH group of the phosphine ligands and the fluorido ligand. Stochiometric model reactions of nickel(II) fluorido complexes with PhB(OH)₂ revealed that the former can be considered as intermediates in Suzuki–Miyaura cross coupling reactions. Catalytic experiments were attempted using 10 mol-% of trans-[Ni(F)(2-C₅NF₄){PPh₂(Ind)}₂] as catalyst and the activities of the PPh₂(Ind) complex were compared to the ones of an analogous nickel(II) fluorido complex, bearing PPh₃ instead of PPh₂(Ind) as ligands. The latter exhibited a somewhat lower catalytic activity suggesting a slight influence of the H-bonds in the outer coordination sphere.