分子筛的酸处理对Mo/HZSM-5催化甲烷无氧芳构化反应性能的影响

 采用HNO3溶液对HZSM-5分子筛进行预处理,并以处理后的分子筛为载体制备了Mo/HZSM-5 催化剂. 结果表明,改性的Mo/HZSM-5催化剂在甲烷无氧脱氢芳构化反应中表现出很好的稳定性,显著地抑制了积炭物种在催化剂表面的形成. SEM,XRD和1H MAS NMR等表征结果表明,酸处理在一定程度上降低了HZSM-5分子筛的结晶度,使部分Al物种脱离骨架结构,迁移到骨架外形成新的表面Al羟基,从而使HZSM-5分子筛上B酸中心的数目明显减少. 未经改性的Mo/HZSM-5催化剂表面,平均每个晶胞中有1.12个B酸位,而改性的Mo/HZSM-5催化剂表面,平均每个晶胞中仅有0.88个B酸位. 这表明过多的酸性位存留在催化剂上会引起积炭的生成,降低催化剂的稳定性.     

一种获得高活性和高稳定性甲烷无氧芳构化Mo/HZSM-5催化剂的前处理方法

 利用氢气在较低温度(623 K)下对6%Mo/HZSM-5催化剂进行预处理,考察了经低温还原预处理的催化剂在甲烷无氧芳构化反应中的催化性能. 结果表明,经过预处理的催化剂比未经预处理的催化剂表现出更好的甲烷转化活性和稳定性. 1H MAS NMR和EPR表征结果表明,在623 K氢气气氛中对Mo/HZSM-5催化剂进行预处理不会造成Mo物种在分子筛外表面的进一步分散,也不会导致外表面的Mo物种向孔道内迁移. 但是,低温还原预处理可以有效地促进Mo物种由易还原的六方密堆积结构向难还原的面心立方结构转化,后者在反应中具有更好的活性和稳定性.     

NH4F改性Mo/HZSM-5催化剂上的甲烷无氧芳构化反应: 预处理温度影响的进一步研究

 进一步研究了HZSM-5分子筛的NH4F预处理温度对制得的Mo/HZSM-5催化剂的影响. X射线衍射和魔角旋转固体核磁共振(27Al MAS NMR)的表征结果表明, NH4F预处理后的HZSM-5分子筛上发生了部分脱铝,在 27Al MAS NMR谱中δ=-12.7 处出现了宽化峰,可归属为AlO6-xFx的特征峰. Mo/HZSM-5样品的NH3程序升温脱附与 27Al MAS NMR结果均表明, MoO3与经NH4F预处理的HZSM-5的相互作用增强,而且该作用随NH4F预处理温度的升高而加大. 经NH4F预处理的Mo/HZSM-5催化剂显示出良好的抗积碳性能,这不仅与载体B酸量的减少有关,而且与催化剂上MoCx/MoCxOy与载体B酸量的匹配有关.     

载体酸性对Mo/HZSM-5-Al2O3催化剂上烯烃歧化反应性能的影响

在固定床反应器上考察了Mo/HZSM-5-Al2O3催化剂上乙烯与2-丁烯歧化制丙烯反应的性能.结合X射线衍射、NH3程序升温脱附、吡啶吸附红外光谱、H2程序升温还原和程序升温氧化等表征结果发现,载体酸性的差异导致催化剂酸性和 Mo物种落位方式不同.载体酸性较强时,催化剂积炭严重,反应稳定性差;载体酸性较弱时,Mo物种...     

Mg助剂对Co/Mg/HZSM-5催化剂结构及其催化甲烷部分氧化制合成气性能的影响

采用XRD、TEM、H2-TPR、Raman、XPS和活性评价等方法, 研究了Mg助剂对Co/Mg/HZSM-5催化剂物理化学性质和甲烷部分氧化(POM)制合成气反应性能的影响. 研究发现, 在Co/HZSM-5催化剂中添加Mg助剂, 可有效地提高催化剂的催化活性和稳定性. 在750 ℃和空速1.0×10⁵ mL·h^-1·g^-1反应条件下, Co/Mg/HZSM-5在连续反应30 h的实验时间内催化活性稳定不变, 而Co/HZSM-5因其活性中心Co0转化生成CoAl2O4非活性相, 反应10 h后即迅速失活. 催化剂表征结果表明, 在Co/Mg/HZSM-5催化剂中钴物种除以Co3O4存在外, 一部分钴物种还与Mg助剂发生强相互作用生成较难还原的MgCo2O4, 由此导致还原后钴金属的分散度较高. 关联催化剂表征和活性评价结果, 讨论了催化剂结构与性能之间的关系.     

甲烷在铕改性Mo/HZSM-5催化剂上的直接芳构化反应 Ⅱ.铕对催化剂中钼物种的影响

采用X射线光电子能谱和程序升温还原实验研究了Mo-Eu/HZSM-5催化剂中铕对钼物种的影响.结果表明:铕的添加使得钼的3d电子结合能增加.这说明助剂铕与主催化剂钼存在强相互作用,这种强相互作用使得三氧化钼的程序升温还原谱产生较大的变化,相应的还原温度升高.结合实验现象,提出了该催化剂的活性钼物种前身的结构模型.     

MoVBiTeO/SiO2对丙烷选择氧化制丙烯醛反应的催化性能

用浸渍法制备了一系列不同Mo/V比的MoVBiTeO/SiO2催化剂,并用X射线衍射、拉曼光谱、X射线光电子能谱、程序升温还原和红外光谱等方法对催化剂的结构、氧化还原性质和酸性进行了表征,考察了催化剂对丙烷选择氧化制丙烯醛反应的催化性能.结果表明,Mo与V组分之间存在较强的相互作用,调变了催化剂的结构,并形成了氧化还原循环(V5 Mo5 V4 Mo6 ),促进了催化剂中电子和O物种的传递,使催化剂的低温可还原性增强,催化活性提高.Mo组分有利于形成L酸位,而V组分有利于形成B酸位.这可能是丙烯醛选择性随Mo/V比增大而逐渐提高的原因之一.当Mo/V摩尔比为6时,催化剂具有最高的丙烯醛收率(9.7%).     

W掺杂对Mo/HZSM-5催化甲烷无氧芳构化性能的影响

采用浸渍法制备了Mo/HZSM-5、Mo-W/HZSM-5和W/HZSM-5三种催化剂。通过XRD、BET、Py-FTIR、H2-TPR、XPS、TEM、NH3-TPD、TPO、TG和Raman等技术对催化剂的物化性质进行表征,并考察其在甲烷无氧芳构化反应中的催化性能。结果表明,相比于Mo/HZSM-5,Mo-W/HZSM-5催化剂表现出更高的CH_4转化率、芳烃收率以及催化稳定性。H_2-TPR和XPS结果表明,Mo-W/HZSM-5中存在更易被还原为W~(4+)的正八面体(WO_6)~(n-)前驱体,反应过程中W4+的形成有助于提高CH_4转化率。同时,积炭表征结果表明,石墨型积炭是导致Mo/HZSM-5催化剂快速失活的主要原因,W掺杂可以抑制MoW/HZSM-5催化剂上石墨型积炭的形成,进而提高催化剂的稳定性。     

A New Way to Obtain Mo/HZSM-5 Catalyst with High Activity and Selectivity for Methane Dehydro-aromatization 一种制备高活性和高稳定性甲烷无氧芳构化Mo/HZSM-5的新方法

 采用气相化学沉积法对HZSM-5分子筛的外表面进行选择性修饰,然后将它作为载体制备Mo/HZSM-5 催化剂,并应用于甲烷无氧脱氢芳构化反应. 改性的催化剂比未改性的催化剂表现出更好的甲烷转化活性、芳烃选择性和稳定性,明显地抑制了积碳的生成. 利用核磁氢谱对催化剂进行了表征. 在未经改性的Mo/HZSM-5催化剂表面,平均每个晶胞中含有1.12个B酸中心, 而在改性后的催化剂表面,平均每个晶胞中只有0.61个B酸位. 说明在甲烷无氧芳构化反应中,少量的B酸中心即可达到反应要求,过多的酸性位只会导致更多积碳物种的生成,从而加快催化剂失活速度,降低其稳定性.     

甲烷脱氢芳构化W/HZSM-5基催化剂的制备

由H2SO4酸化的(NH4)2WO4溶液(pH=2～3)制备的W-H2SO4/HZSM-5催化剂对甲烷脱氢芳构化(DHAM)反应的催化活性比不经酸化的(NH4)2WO4溶液(pH=8～9)制备的W/HZSM-5催化剂高得多.氧化前驱态催化剂的H2-TPR研究表明,W-H2SO4/HZSM-5试样的还原所需温度比W/HZSM-5低得多;前者可还原至较低价态的W物种在负载总W量中所占比例也比后者高得多.H2-TPR及相关体系的EPR和Raman表征结果相互佐证表明,用H2SO4酸化导致负载钨酸铵前驱溶液中一些由共边正八面体配位结构单元(WO6)n-构成的聚钨酸根物种的生成;W-H2SO4/HZSM-5催化剂对DHAM反应催化活性之所以高,主要由于所负载的W前驱物种较大部分是(WO6)n-基的W物种,而非(WO4)2-基W物种;在较低温度下就可被还原,且在DHAM反应条件下有一部分可还原至较低价态W4+的(WO6)n-物种很可能是催化活性位的前驱组成部分.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.