SiO2复合Pt-Cd0.53Zn0.47S固溶体的光催化性能

采用共沉淀法制备了Cd0.53Zn0.47S固溶体光催化剂,以光还原沉积法负载Pt,水解正硅酸乙酯负载SiO2,得到了负载Pt的SiO2复合光催化剂SiO2/Pt-Cd0.53Zn0.47S,并研究了水解pH值对其催化活性的影响.通过X射线衍射（XRD）、比表面（BET）、荧光光谱（PL）、紫外-可见漫反射光谱（UV-Vis DRS）和扫描电镜（SEM）等测试技术对催化剂进行了表征.结果表明,SiO2复合光催化剂有效地抑制了Pt-Cd0.53Zn0.47S光催化过程中发生的光腐蚀和粒子团聚,促使光生电子和空穴分离,从而使可见光制氢催化剂活性和稳定性大大提高.     

BiVO_4/MOF复合材料的合成及其光催化性能

通过简单溶剂热法制备了一种新型复合光催化剂BiVO_4/M IL-53(Fe);运用XRD、SEM/EDS、FT-IR、N_2吸附-脱附和UV-vis DRS等手段对其进行表征,并对其光催化降解RhB活性进行了研究,提出了相应的光催化降解RhB的可能机理。结果表明,相较于单一BiVO_4材料,复合催化剂的比表面积增大,且其光催化效率相较于纯BiVO_4和MIL-53(Fe)也有了较大的提高;其中,BF-2复合材料的光催化活性最高,分别约为纯MIL-53 (Fe)和BiVO_4的5. 2倍和8. 1倍。同时,BiVO_4/MIL-53(Fe)复合光催化剂经过四次循环实验后,仍能保持较稳定的光催化活性和结构。     

复合光催化剂CdS-Pt/TiO2制备及可见光光解海水制氢性能

水热法制备了单斜CdS与Pt/TiO2复合的光催化剂.通过X射线衍射、紫外-可见漫反射光谱、荧光光谱、扫描电子显微镜和BET方法对催化剂进行了表征.以可见光光解纯水和海水制氢为探针反应,考察了CdS-Pt/TiO2光催化剂的活性.结果表明:海水中无机盐的存在有利于电子给体捕获光生空穴,提高了电子和空穴的分离效果;海水中单斜CdS可转化为立方和六方混合晶相.最佳条件下,催化剂光解海水制氢活性比纯水提高了33%,而且有较高的稳定性.     

SiO2复合Pt-Cd0.53Zn0.47S固溶体的光催化性能

采用共沉淀法制备了Cd0.53Zn0.47S固溶体光催化剂, 以光还原沉积法负载Pt, 水解正硅酸乙酯负载SiO2, 得到了负载Pt的SiO2复合光催化剂SiO2/Pt-Cd0.53Zn0.47S, 并研究了水解pH值对其催化活性的影响. 通过X射线衍射(XRD)、比表面(BET)、荧光光谱(PL)、紫外-可见漫反射光谱(UV-Vis DRS)和扫描电镜(SEM)等测试技术对催化剂进行了表征. 结果表明, SiO2复合光催化剂有效地抑制了Pt-Cd0.53Zn0.47S光催化过程中发生的光腐蚀和粒子团聚, 促使光生电子和空穴分离, 从而使可见光制氢催化剂活性和稳定性大大提高.     

SiO2复合Pt-Cd0.53Zno0.47S固溶体的光催化性能

采用共沉淀法制备了Cd0.53Zn0.47S固溶体光催化剂,以光还原沉积法负载Pt,水解正硅酸乙酯负载SiO2,得到了负载Pt的SiO2复合光催化剂SiO2/Pt-Cd0.53Zn0.47S,并研究了水解pH值对其催化活性的影响.通过X射线衍射(XRD)、比表面(BET)、荧光光谱(PL)、紫外-可见漫反射光谱(UV-Vis DRs)和扫描电镜(SEM)等测试技术对催化剂进行了表征.结果表明,SiO2复合光催化剂有效地抑制了Pt-Cd0.53Zn0.47S光催化过程中发生的光腐蚀和粒子团聚,促使光生电子和空穴分离,从而使可见光制氢催化剂活性和稳定性大大提高.     

BiOCI-ovl坡缕石复合可见光催化剂的制备及其对醇类的选择性氧化研究

采用简单的一步水热法,制备了一系列BiOCl-ov/坡缕石（PGS）复合材料x B/P（x是复合材料中BiOCl-ov的摩尔含量）.通过扫描电子显微镜（SEM）、粉末X射线衍射（XRD）、X射线光电子能谱（XPS）、N₂吸附-脱附、红外光谱（FT-IR）、紫外-可见漫反射光谱（UV-Vis DRS）、荧光光谱（PL）和电化学阻抗谱（EIS）对复合光催化剂的结构、形貌和光学性质以及电化学性质做了详细的表征.研究了催化剂在可见光条件下对芳香醇的选择性氧化的催化性能,结果表明,以所得复合材料为催化剂,在可见光照射下,苯甲醇转化率达到了78%,产物苯甲醛的选择性达到了86%,且催化剂的光稳定性良好.     

金属有机骨架材料MIL-53(Al)负载纳米Pd颗粒：一种CO氧化的活性催化剂

通过等体积浸渍法制备了金属有机骨架材料MIL-53(Al) (MIL：Materials of Institut Lavoisier)负载纳米Pd催化剂. 采用X射线衍射(XRD)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对催化剂的结构进行了表征. 催化剂在反应前后XRD衍射峰保持不变,说明载体MIL-53(Al)具有良好的稳定性. 采用TEM对催化剂进行表征,结果表明,MIL-53(Al)的多孔晶体结构有助于形成高度分散的纳米Pd颗粒,样品2.7% (w) Pd/MIL-53 中Pd颗粒的平均粒径为2.21 nm. 该催化剂在CO氧化反应中表现出较高的催化活性,115 ℃达到完全转化. 同时催化剂可循环使用,多次反应后催化活性和催化剂结构都保持稳定.     

金属有机骨架材料MIL-53(Al)负载纳米Pd颗粒:一种CO氧化的活性催化剂(英文)

通过等体积浸渍法制备了金属有机骨架材料MIL-53(Al)(MIL:Materials of Institut Lavoisier)负载纳米Pd催化剂.采用X射线衍射(XRD)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对催化剂的结构进行了表征.催化剂在反应前后XRD衍射峰保持不变,说明载体MIL-53(Al)具有良好的稳定性.采用TEM对催化剂进行表征,结果表明,MIL-53(Al)的多孔晶体结构有助于形成高度分散的纳米Pd颗粒,样品2.7%(w)Pd/MIL-53中Pd颗粒的平均粒径为2.21 nm.该催化剂在CO氧化反应中表现出较高的催化活性,115°C达到完全转化.同时催化剂可循环使用,多次反应后催化活性和催化剂结构都保持稳定.     

溶剂热条件对MIL-53(Fe)结晶度及吸附性能的影响

采用溶剂热法制备一系列金属有机骨架材料MIL-53(Fe),使用傅立叶变换红外光谱仪、X射线衍射仪、电子扫描电镜等表征手段对其结构进行表征.探讨了其对有机染料亚甲基蓝的吸附性能.通过改变反应温度来调控MIL-53(Fe)的结晶度,结果表明,高结晶度的MIL-53(Fe)更利于吸附行为.吸附动力学、等温线研究表明,该吸附过程符合准二级动力学和Langmuir等温线模型.     

羟基修饰MOFs的合成、表征和光催化机理

合成了具有大的比表面积和结构容易修饰的金属有机框架材料（MOFs）光催化剂：MIL-101（Cr）和MIL-101（Cr）-2OH。利用红外、X射线粉末衍射、X射线光电子能谱等仪器对MIL-101（Cr）和MIL-101（Cr）-2OH光催化剂的结构进行表征分析。通过紫外-可见光漫反射光谱、ζ电位、电喷雾电离质谱系统地分析研究MOFs中不参与配位的给电子基团对光催化降解亚甲基蓝性能的影响。研究发现MIL-101（Cr）-2OH中桥联配体2，5-二羟基对苯二甲酸上不参与配位的2个羟基，可以通过配体-金属的电荷转移作用影响光的吸收，从而调控光催化降解速率     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.