WO_3/4,4''''-联苄胺光致变色超晶格薄膜的研究

无机 -有机超晶格薄膜材料的制备以及性质研究是目前国际上的研究热点。基于超分子化学自组装原理 ,利用自组装技术构建含有有机分子的光致变色纳米超晶格薄膜材料 ,是一种研制光致变色功能薄膜材料的新方法。此项研究能够为研制变色响应速度快的、稳定性好的、变色可调控的光致变色器件奠定基础 ,具有深远的意义和重要的科学价值。本文采用溶液中相反电荷聚电解质自组装的方法 ( PEs法 ) [1] ,制备了 WO3/4,4′-联苄胺超晶格薄膜 ;采用紫外可见吸收光谱和小角 X-射线衍射谱对薄膜的层状结构和分子的排列方式进行了研究。1　实验部分1.1　…     

WO3/4,4′-联苄胺光致变色超晶格薄膜的研究

无机-有机超晶格薄膜材料的制备以及性质研究是目前国际上的研究热点.基于超分子化学自组装原理,利用自组装技术构建含有有机分子的光致变色纳米超晶格薄膜材料,是一种研制光致变色功能薄膜材料的新方法.此项研究能够为研制变色响应速度快的、稳定性好的、变色可调控的光致变色器件奠定基础,具有深远的意义和重要的科学价值.本文采用溶液中相反电荷聚电解质自组装的方法(PEs法)[1],制备了WO3/4,4′-联苄胺超晶格薄膜;采用紫外可见吸收光谱和小角X-射线衍射谱对薄膜的层状结构和分子的排列方式进行了研究.     

自组装超薄膜及其应用

自组装膜是指以价键或非价键相互作用在一定表面形成的具有某种特定结构、性能的单层或多层超薄膜。在自然界中 ,人们可以看到许多不同的组分通过自组装形成具有层状超分子结构的复杂体系 ,但直到 1 946年 ,人类才在清洁表面制备了单分子层膜[1] 。与分子束外延和化学气相沉积等制备膜的方法相比 ,以自组装方式形成的超薄膜具有有序性高、平整度好、膜的厚度分子水平可控以及不受基底形状限制等优点[2 ] 。近 1 0多年来 ,随着人们对界面化学研究的深入以及对具有特定功能的薄膜材料的需求 ,使自组装超薄膜的研究成为一个热点。本文从分类、…     

TiO2/十六烷基三甲基溴化铵有序交替层状纳米复合薄膜的制备与结构表征

近年来有序交替的层状纳米结构薄膜的制备吸引了研究者们的极大关注. 目前, 这类薄膜的制备方法研究得最多的是LB技术[1～3]、基于化学吸附的自组装成膜技术[4,5]和交替沉积组装技术[6～8]. 但这几种方法都有明显的缺陷[9,10], 其中,通过LB技术制备有序交替层状纳米复合薄膜需要昂贵的仪器, 而且由于层间是分子相互作用, 膜的稳定性较差; 基于化学吸附的自组装成膜技术由于需要高反应活性的分子和特殊的基底表面, 并且由于化学反应的产率很难达到100%, 因此通过这种方法制备结构有序的多层膜并不容易; 利用交替沉积的方法制备出具有实用厚度的纳米多层膜需要耗费大量的时间. 最近, 出现了一种称为蒸发诱导的超分子自组装方法, 由这种方法制备的纳米多层膜具有成膜速度快和膜有序度高等优点, 此外还可以通过改变成膜物质浓度和拉膜速度来控制薄膜的厚度, 但与LB膜相比其厚度无法在分子水平上控制. 利用这种方法制备多层膜目前的文献报道仅限于线形SiO2与有机物的组装[10～13]. 本文利用这种方法制备了TiO2/十六烷基三甲基溴化铵纳米复合薄膜并对其结构进行了表征, 结果表明所制备的薄膜具有TiO2/十六烷基三甲基溴化铵有序交替的层状结构.     

聚4-重氮基苯乙烯与聚苯乙烯磺酸钠的自组装

1991年Ｄｅｃｈｅｒ等将带相反电荷的聚电解质 ,于水溶液中交替沉积在片基上 ,制备了多层超薄膜[1] ,这种制膜方法现称为静电自组装 .它操作简单 ,无需专用设备 ;一般在水体系进行 ,对环境友好 ;静电力比范德华力强 ,使它比ＬＢ膜稳定 ,所以近年来有很大发展[2 ] .现在自组装成膜驱动力已从静电力扩展到氢键力、电荷转移相互作用、疏水相互作用等 ,用于组装的组分也从聚电解质扩展到多官能团小分子、胶体粒子、无机纳米颗粒 ,ＤＮＡ、蛋白质等生物大分子等[3～ 11] .虽然自组装膜比ＬＢ膜稳定 ,但它也不耐极性溶剂、电解质水溶液等侵蚀 .如…     

硅基多孔氧化铝模板非水电沉积CdS纳米线的研究

纳米材料,包括尺寸为纳米量级的超细微粒?线?薄膜?量子阱和超晶格等引起了人们广泛的重视 [1,2] ?其中 , 半导体纳米微粒和由其构成的纳米固体结构开辟了材料科学研究的新领域?硫化镉 (CdS) 作为一种重要的Ⅱ - Ⅵ族无机半导体材料 , 具有独特的光电性质 , 在光电化学电池和多相光催化反应中都有广泛应用?近年来 , 已有大量关于合成 CdS 纳米结构的文献报导 [3～12] , 所采用的方法如反胶束法?单分子膜法?自组装法以及电化学沉积法等 , 其中非水电解与模板技术相结合的制备方法引起了人们高度的重视并且被广泛的采用?自从 Baranski 等在上…     

光致变色的PW12/1,10DAD自组装超晶格多层膜

本文报道了在固体基底表面上用PE方法连续自组装沉积PW₁₂和1,10-DAD分子,构建了PW₁₂/1,10-DAD自组装多层膜.紫外-可见吸收、X射线衍射等分析结果表明此多层膜有好的超晶格结构,层间距为3.19nm.与真空蒸镀WO₃薄膜相比,PW₁₂/1,10-DAD自组装多层膜表现出更好的光致变色特性.     

脉冲激光沉积纳米NiO薄膜

Na Cl型 Ni O是一种 p型半导体 ,广泛用于传感器、催化剂、涂料、磁性材料及电极材料等领域[1～ 5] .最近 ,Poizot等 [6] 又报道了 Ni O可作为锂离子电池的阳极材料 ,使 Ni O成为又一新的研究热点 .纳米 Ni O粉末的制备方法有多种 ,主要包括化学沉淀法和沉淀转换法 ,Ni O薄膜的制备主要采用磁控溅射、化学气相沉积和电沉积等方法 [7～ 12 ] .脉冲激光沉积法具有操作简单和成膜纯净等优点 ,因此是制备薄膜的重要方法之一 .本文采用脉冲激光沉积 (PLD)法在氧气氛中使用金属镍作为靶材料 ,不锈钢作为基片 ,对 Ni O薄膜的制备进行了研究…     

聚N-对羟苯基丙烯酰胺与重氮树脂的氢键自组装

1991年 Decher[1] 首先从带相反电荷的聚电解质 ,通过静电相互作用在基片上交替沉积形成超薄膜 ,这种通过静电作用形成超薄膜的方法称为静电自组装 .与 L- B膜技术相比 ,静电自组装不需要专用设备 ,一般在水体系进行 ,无污染 .此外 ,静电力比形成 L- B膜的范德华力强 ,从而使其自组装膜比 L- B膜要稳定 .由于这些优点 ,静电自组装技术近年来得到迅速发展 [2～ 8] .通过氢键作用形成超薄膜的方法 (氢键自组装 )是最近才发展起来的技术 . 1 997年 ,沈家骢等 [9,10 ] 通过静电吸引和氢键组装了有序超薄膜 .几乎同时 ,Rubner等 [11] 报道从…     

多金属氧酸盐-三(2,2′-联吡啶)钌层接层自组装纳米复合膜的制备及光致发光性质

层接层自组装技术作为制备均匀、超薄多层薄膜的有效方法已引起人们极大的关注 .利用这种方法可以将无机、有机组分有序地组合在薄膜中 ,在固体基底上构建功能性分子的超分子结构 ,并且可以在分子水平上调控每层膜的结构和厚度 ,从而实现薄膜的光、电、磁、非线性光学等功能化 [1～ 6 ] .多金属氧酸盐具有独特、优异的物理化学性能 ,在药物化学、电化学、催化化学及材料化学等方面具有十分广阔的应用前景 [7～ 9] ,将其组合在薄膜中 ,可赋予膜材料更优异的功能特性 .钌的联吡啶配合物在光化学、电化学及电子和能量转移等领域颇受关注 ,并已…     

自组装单层膜表面制备BiFeO3图案化薄膜的研究

采用短波紫外光(UV)对十八烷基三氯硅烷(OTS)自组装单分子层(SAMs)进行刻蚀,利用化学液相法在OTS-SAMs模板表面制备出铁酸铋(BiFeO₃)图案化薄膜。通过接触角、X射线衍射(XRD)、扫描电镜(SEM)、X射线能谱(EDS)等测试手段对OTS膜和BiFeO₃薄膜进行表征。结果表明：以OTS为模板利用化学液相法成功制备出边缘轮廓清晰、条纹宽度为10~20 μm的BiFeO₃图案化薄膜。     

自组装制备二氧化铪图案化薄膜

采用短波紫外光(UV)在十八烷基三氯硅烷(OTS)自组装单分子层刻蚀不同的微型图案,利用液相自组装技术在OTS模板表面沉积HfO₂图案化薄膜。通过XRD、AFM、SEM、EDS等测试手段对OTS膜和HfO₂薄膜进行表征,结果表明：以OTS为模板利用液相自组装技术成功制备出边缘轮廓清晰、粗糙度较小、条纹宽度为10μm的立方晶型的HfO₂图案化薄膜。     

光致变色WO3/4,4′-BPPOBp超晶格薄膜的制备

Layered WO3/4,4′-BPPOBp self-assemble mulitlayers (SAMs) films have been fabricated by polyelectrolytes (PEs) approach.The SAMs films with well-ordered superlattice structure and d-space of 0.695nm and good photochromic property have been studied by employing UV- visible,small angle XRD and XPS.     

Metal-organic deposition of YBa2Cu3Ox and Bi2Sr2Ca1Cu2Ox films on various substrates starting from different fluorine-free metallorganic compounds

YBa₂Cu₃O_x (Y-123) and Bi₂Sr₂Ca₁Cu₂O_x (Bi-2212) films on various substrates have been prepared by Metal-Organic Deposition starting from different metallorganic fluorine-free compounds and using a very simple instrumentation. The processing conditions include a rapid pyrolysis step in air and an annealing step in oxygen for Y-123 and in air for Bi-2212. The films obtained have been characterized by X-ray diffraction (XRD) and the formation of a superconducting phase of Y-123 or Bi-2212 was confirmed measuring the critical temperature (T _c) with Ac-susceptibility and resistive measurements. Microstructure and final cationic ratios have been studied by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS).     

Staphylococcus aureus adhesion to self-assembled monolayers: effect of surface chemistry and fibrinogen presence

Staphylococcus aureus adhesion on self-assembled monolayers (SAMs) formed by the adsorption of alkanethiols on transparent gold films has been studied in real time under well-defined flow conditions using a radial flow chamber and an automated videomicroscopy system. SAMs terminated with methyl, hydroxyl, carboxylic acid and tri(ethylene oxide) groups were investigated. SAMs were characterized using contact angle measurements, ellipsometry and X-ray photoelectron spectroscopy. Adhesion experiments using the Newman strain of S. aureus were performed on bare monolayers and monolayers pre-incubated with fibrinogen. Adhesion was found to be lowest on the ethylene oxide-bearing surfaces, followed by the hydroxyl surfaces. Adhesion on the carboxylic- and methyl-terminated SAMs was much higher. Bacterial adhesion was higher on the hydrophobic surfaces. Pre-incubation of surfaces with fibrinogen minimized the effect of the surface properties of the substrate. Adhesion was increased on all surfaces when fibrinogen was present and no significant differences were observed between adhesion to the different SAMs. This study showed that surfaces rich in ethylene oxide groups can be effectively used to prevent bacterial adhesion. However, under physiological conditions, most of the substrate properties are masked by the presence of the adsorbed protein layer and the effect of substrate properties on bacteria adhesion under flow is minimal.     

Effect of humidity and temperature on nano/microtribolgical properties of perfluorinated carboxylic acid and hydrogenated carboxylic acid self‐assembled monolayers deposited on aluminum‐coated silicon substrate

Two series of perfluorinated carboxylic acid (FC) and hydrogenated carboxylic acid (HC) self‐assembled monolayer (SAM) films were prepared on aluminum surfaces separately by chemical vapor deposition. The formation, structure and morphology of these films were characterized by measuring contact angle with ellipsometric method, x‐ray photoelectron spectrometry, and atomic force microscopy, respectively. FC and HC SAMs with long chains formed more densely packed films than those with short chains did. The comparative micro/nanoscale friction and adhesive properties of FC and HC SAMs, with various chain lengths on aluminum‐coated silicon substrate, were investigated. The influence of environmental conditions, such as relative humidity (RH) and temperature, on the friction and adhesion behavior was studied. Micro/nanotribological properties of the films were greatly influenced by their backbones and terminal groups. FC SAMs with long chain exhibited adhesion‐resistance, friction reduction, and environmental independence. Copyright © 2009 John Wiley & Sons, Ltd.     

Comprehensive investigation of self-assembled monolayer formation on ferromagnetic thin film surfaces

We report a simple, universal method for forming high surface coverage SAMs on ferromagnetic thin (< or =100 nm) films of Ni, Co, and Fe. Unlike previous reports, our technique is broadly applicable to different types of SAMs and surface types. Our data constitutes the first comprehensive examination of SAM formation on three different ferromagnetic surface types using two different surface-binding chemistries (thiol and isocyanide) under three different preparation conditions: (1) SAM formation on electroreduced films using a newly developed electroreduction approach, (2) SAM formation on freshly evaporated surfaces in the glovebox, and (3) SAM formation on films exposed to atmospheric conditions beforehand. The extent of SAM formation for all three conditions was probed by cyclic voltammetry for surfaces functionalized with either (11-thiolundecyl)ferrocene (Fc-(CH2) 11-SH) or (11-isocyanoundecyl)ferrocene (Fc-(CH2) 11-NC). SAM formation was also probed for straight-chain molecules, hexadecanethiol and hexadecaneisocyanide, with contact angle measurements, X-ray photoelectron spectroscopy, and reflection-absorption infrared spectroscopy (RAIRS). The results show that high surface coverage SAMs with low surface-oxide content can be achieved for thin, evaporated Ni and Co films using our electroreduction process with thiols. The extent of SAM formation on electroreduced films is comparable to what has been observed for SAMs/Au and to what we observe for SAMs/Ni, Co, and Fe samples prepared in the glovebox.     

Synthesis and structural characterization of glucopyranosylamide films on gold

Self-assembled monolayers (SAMs) of glucose derivatives on gold have been prepared from alpha- and beta-glucopyranosylamide derivatives. The glucosyl conjugates were synthesized stereoselectively via the in situ generation of glucosyl isoxazolines followed by treatment with thiopyridyl esters. The resulting film structures were characterized by atomic force microscopy, reflection Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The experimental data indicated that alpha- or beta-linked glucopyranosylamide derivatives with free hydroxyl groups attach to gold via the thiol linker. Both derivatives form monolayer films with high packing densities--comparable to those typically observed for alkanethiol monolayers on gold. Acetate analogues of these conjugates do not form SAMs on gold; they form multilayered films under identical deposition conditions.     

Correlation between the molecular structure and photoresponse in aliphatic self-assembled monolayers with azobenzene tailgroups

We have compared the structural and photoisomerization properties of self-assembled monolayers (SAMs) comprising either the trans or cis isomers of azobenzene terminated dithiolane with in-chain amide unit, viz., 4-(phenyldiazenyl)phenyl-4-(1,2-dithiolane-3-yl)-butylcarboxamide ( 1). These films were prepared on Au(111) from solutions of both isomers. Structure and composition of the SAMs were studied by X-ray photoelectron spectroscopy and near-edge X-ray absorption fine structure spectroscopy. The photoresponse of the films was monitored in real time by ellipsometry. SAMs fabricated from the trans isomer were found to be densely packed and highly ordered. These films did not show any discernible photoresponse upon irradiation with UV light, which, under favorable conditions, triggers the trans- cis isomerization. In contrast, films prepared from solutions containing predominantly the cis isomer were loosely packed and mostly disordered but exhibited reversible photoreactivity. The results confirm that steric effects, i.e., available free volume, play a dominant role for the photoresponse of aliphatic SAMs bearing the photoactive azobenzene group. The crystal structure of 1 ( trans isomer) exhibits a row-like aggregation of neighboring molecules by weak hydrogen bonds and can be taken as a model for the arrangement of 1 in the monolayer films. Further, in addition to the surface coordination behavior, we have also mimicked the chemisorption of the 1,2-dithiolane moiety onto the gold substrate in molecular coordination chemistry in oxidative addition reactions with the zero-valent platinum complex [Pt(PPh 3) 4].     

Effect of the phase states of self-assembled monolayers on pentacene growth and thin-film transistor characteristics

To investigate the effects of the phase state (ordered or disordered) of self-assembled monolayers (SAMs) on the growth mode of pentacene films and the performance of organic thin-film transistors (OTFTs), we deposited pentacene molecules on SAMs of octadecyltrichlorosilane (ODTS) with different alkyl-chain orientations at various substrate temperatures (30, 60, and 90 degrees C). We found that the SAM phase state played an important role in both cases. Pentacene films grown on relatively highly ordered SAMs were found to have a higher crystallinity and a better interconnectivity between the pentacene domains, which directly serves to enhance the field-effect mobility, than those grown on disordered SAMs. Furthermore, the differences in crystallinity and field-effect mobility between pentacene films grown on ordered and disordered substrates increased with increasing substrate temperature. These results can be possibly explained by (1) a quasi-epitaxy growth of the pentacene film on the ordered ODTS monolayer and (2) the temperature-dependent alkyl chain mobility of the ODTS monolayers.