CeO2和Pd在Ni/γ-Al2O3催化剂中的助剂作用

采用脉冲微反技术研究了添加n型半导体氧化物CeO2及贵金属Pd对Ni/γ-Al2O3催化剂上CH4积炭/CO2消炭反应性能的影响,并运用BET、TPR、CO2-TPSR及氢吸附等技术对催化剂进行了表征.结果表明,n型半导体氧化物CeO2的添加可以降低Ni/γ-Al2O3催化剂上CH4裂解积炭活性,提高CO2消炭活性,添加少量贵金属Pd可以进一步改变载体Al2O3、助剂CeO2和活性组分Ni之间的相互作用,从而改善Ni/γ-Al2O3催化剂的抗积炭性能.通过Ni-Ce-Pd/γ-Al2O3催化剂上CH4积炭/CO2消炭模型对上述作用机制作出了新的解释.     

La2O3对沼气重整制氢催化剂Ni/γ-Al2O3的影响

用浸渍法制备了不同La2O3含量的Ni/La2O3/γ-Al2O3催化剂,用CH4/CO2体积比为1的混合气体模拟沼气,考察了La2O3对沼气重整制氢催化剂Ni/γ-Al2O3的结构及催化性能的影响.运用XRD、H2-TPR、BET及TEM等手段对催化剂进行了表征.结果表明,La2O3对催化剂Ni/γ-Al2O3的影响主要取决于其含量.载体中La2O3的添加增强了Ni与Al2O3之间的相互作用.添加适量的La2O3能使催化剂具有更好的可还原性,并能增加金属Ni的分散性,抑制反应过程中Ni的烧结,提高载体对CO2的吸附能力,从而改善了催化剂的抗积炭性,使催化剂具有较好的活性及稳定性.反之,过量La2O3的掺杂会使催化剂的抗积炭性及活性下降.当La2O3含量为6%(ω)时,催化剂中Ni晶粒具有较好的分散性、还原性及抗积炭性,从而使催化剂具有更好的活性及稳定性.     

La2O3对沼气重整制氢催化剂Ni/γ-Al2O3的影响

用浸渍法制备了不同La2O3含量的Ni/La2O3/γ-Al2O3催化剂, 用CH4/CO2体积比为1的混合气体模拟沼气, 考察了La2O3对沼气重整制氢催化剂Ni/γ-Al2O3的结构及催化性能的影响. 运用XRD、H2-TPR、BET及TEM等手段对催化剂进行了表征. 结果表明, La2O3对催化剂Ni/γ-Al2O3的影响主要取决于其含量. 载体中La2O3的添加增强了Ni与Al2O3之间的相互作用. 添加适量的La2O3能使催化剂具有更好的可还原性, 并能增加金属Ni的分散性, 抑制反应过程中Ni的烧结, 提高载体对CO2的吸附能力, 从而改善了催化剂的抗积炭性, 使催化剂具有较好的活性及稳定性. 反之, 过量La2O3的掺杂会使催化剂的抗积炭性及活性下降. 当La2O3含量为6%(w)时, 催化剂中Ni晶粒具有较好的分散性、还原性及抗积炭性, 从而使催化剂具有更好的活性及稳定性.     

Ni/La2O3/α-Al2O3中的高温脱附氢促进CH4/CO2重整反应的初活性

 通过H2程序升温脱附实验,在H2还原的Ni/La2O3/α-Al2O3催化剂上可以明显观察到高温脱附氢(高温氢). 动力学实验结果表明,随催化剂上高温氢含量的增加, CH4/CO2重整反应的初始活性升高,同时高温氢也可在重整反应过程中原位生成,并使重整反应的活性最终达到稳定. 脉冲实验结果表明,随催化剂上高温氢含量的增加, CH4解离后生成的活性中间体CHx物种的x值也增大,进而降低了CHx与CO2反应的活化能,提高了CHx与CO2反应的速率. La2O3助剂的添加提高了Ni/La2O3/α-Al2O3催化剂上逆水气变换反应的速率,并且对CO2的活化也有促进作用. La2O3助剂的加入对于CH4/CO2重整反应的重要作用是使高温氢的数量增多且稳定性提高,有利于保持CHx物种中较高的x值,促进重整反应.     

CeO2和Pd在Ni/γ-Al2O3催化剂中的助剂作用

采用脉冲微反技术研究了添加n型半导体氧化物CeO2及贵金属Pd对Ni/γ Al2O3催化剂上CH4积炭/CO2消炭反应性能的影响,并运用BET、TPR、CO2 TPSR及氢吸附等技术对催化剂进行了表征.结果表明, n型半导体氧化物CeO2的添加可以降低Ni/γ Al2O3催化剂上CH4裂解积炭活性,提高CO2消炭活性,添加少量贵金属Pd可以进一步改变载体Al2O3、助剂CeO2和活性组分Ni之间的相互作用,从而改善Ni/γ Al2O3催化剂的抗积炭性能.通过Ni Ce Pd/γ Al2O3催化剂上CH4积炭/CO2消炭模型对上述作用机制作出了新的解释.     

甲烷在稀土助剂修饰的Ni/α-Al2O3催化剂上的解离

采用脉冲－色谱法，考察了甲烷在La2O3、CeO2修饰的Ni/α-Al2O3催化剂上的解离，并用TPR、XRD等方法对催化剂进行了表征。结果表明，添加La2O3，能促进甲烷的解离，并可使解离产生的碳保持较高的活性；CeO2的添加对甲烷的解离积炭有一定的抑制作用；La2O3和CeO2均能抑制镍晶粒的聚集。甲烷在Ni基催化剂上的解离，具有一定的结构敏感性。     

碱性助剂的添加对Ni/CaO-Al2O3催化剂性能的影响

在CH4、 CO2和O2制合成气的反应中, 通过在Ni/CaO-Al2O3催化剂中添加碱性助剂K2O、 MgO和La2O3, 使催化剂的性能得到了改善. 实验结果表明, MgO和La2O3助剂的添加, 有利于提高催化剂的活性;添加K2O, 却相反. 测得催化剂上积炭量的顺序为: Ni-La2O3/CaO-Al2O3相似文献   

Ni/γ-Al2O3中助剂的加入对于CH4/CO2重整反应性能的影响

以含量为2%的K、Cu、La、Mg、Ca、Ba、Mo、Ce等多种金属作为助剂分别加入Ni/γ-Al2O3催化剂样品中,并对其分别用于CH4/CO2重整反应时的活性和积碳量进行了考察.研究结果表明加入助剂后的各种催化剂的活性变化不一.其中,以含Ca的催化剂效果最好,其甲烷的转化率可由原来的71.91%增加到72.92%,其次为La.但所有加入助剂后的催化剂的抗积碳性能均有所提高,特别是碱金属K的添加,使催化剂表面积碳量降到了0.1%.这表明添加碱金属或碱土金属助剂,对提高Ni/γ-Al2O3催化剂在CH4/CO2重整反应中的抗积炭性能有很大作用.     

稀土等碱性助剂对甲烷部分氧化制合成气整体式Ni/γ-Al2O3催化剂性能的影响

制备了整体式Ni/γ-Al2O3和添加稀土等碱性助剂的整体式Ni/γ-Al2O3催化剂. 研究了温度、烷氧比、空速和助剂等因素对甲烷部分氧化反应性能的影响,并利用XRD和TPR对催化剂进行了表征. 结果表明,催化剂活性随着温度的升高而增加;CH4转化率随着烷氧比的增加而降低;当空速为1×105 h-1时,整体式催化剂的催化性能最佳. 添加碱性助剂Ce,La,Na,Sr均有利于改善催化剂的还原性能,提高催化剂的活性. 其中添加稀土Ce,La可使副反应CH4+2 O2→CO2+2H2O 完全被抑制,从而使H2选择性达到100%.     

CH_4、CO_2与O_2制合成气催化剂研究 VI.催化剂表面积炭种类和积炭动力学研究

利用XPS考察了甲烷、二氧化碳和氧气制合成气反应前后Ni/γ-Al2O3和Ni-Ce-Mn-Li/γ-Al2O3催化剂表面炭物种.发现反应后Ni/γ-Al2O3催化剂表面积炭有四种类型-表面碳酸盐、污染炭、金属炭化物和非活性炭,而高活性和稳定性Ni-Ce-Mn-Li/γ-Al2O3催化剂表面积炭仅有两种类型——污染炭和金属炭化物.非活性炭是导致催化剂失活的主要原因之一.积炭动力学研究表明:Ni-Ce-Mn-Li/γ-Al2O3催化剂上积炭反应的动力学方程为:-0.45·PO2-1.80,该催化剂积炭反应的表观活化能较高,从而抑制积炭反应的进行.1.1·PO2r0=A·e-ERT·PCH4     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。