离子液体BMIBF4性质的研究

用最大气泡法和韦氏天平法, 在278.15～343.15 K范围内测定了离子液体BMIBF₄的表面张力和密度; 讨论了这个离子液体的体积性质和表面性质; 根据离子个头大又极不对称的特点, 提出了离子液体的空隙模型. 根据空隙模型计算的离子液体恒压热膨胀系数与实验值相比, 偏差在10%左右.     

利用标准加入法研究离子液体EMIBF4的密度和表面张力

在278.15～338.15 K温度范围内, 分别用Anton Paar密度计和最大气泡法测定了含有不同微量水的离子液体EMIBF₄ (1-ethyl-3-methylimidazolium tetrafluoroborate)的密度和表面张力, 讨论了微量水对这些性质的影响, 进而用标准加入法确定了无水离子液体EMIBF₄的密度和表面张力. 借助Glasser理论和空隙模型讨论了EMIBF₄的热力学性质. 用空隙模型计算的离子液体热膨胀系数与实验测定值较好一致, 说明空隙模型具有合理性.     

铝基离子液体BMIAlCl4的热力学性质

在高纯氩气氛下, 直接将摩尔比为1:1的高纯无水AlCl₃和BMIC(氯化1-甲基-3-丁基咪唑)搅拌混合, 得到一种无色透明的离子液体BMIAlCl₄. 在278.2～343.2 K范围内, 用最大气泡法测定了BMIAlCl₄的表面张力, 用Westphal天平法测定了该离子液体的密度；利用Glasser经验方程讨论了该离子液体的热力学性质, 并与其它离子液体作了比较. 根据空隙模型计算了BMIAlCl₄离子液体的恒压热膨胀系数, 与本文实验值基本一致, 说明空隙模型具有一定的合理性.     

锌基离子液体BMIZn2Cl5的性质研究

合成了对水和空气均稳定的锌基离子液体五氯化二锌-1-甲基-3-丁基咪唑(BMIZn2Cl5). 在313.15～343.15 K温度范围内, 测定了离子液体BMIZn2Cl5的密度和表面张力. 拟合并估算了BMIZn2Cl5的恒压热胀系数和表面熵, 并根据Glasser理论和离子液体的空隙模型, 讨论了BMIZn2Cl5的热力学性质, 估算出其晶格能和标准熵 , 计算了离子液体的恒压热胀系数α, 与实验值基本一致, 说明了空隙模型的合理性. 并利用Kabo和Rebelo的方法估算了锌基离子液体BMIZn2Cl5的正常沸点, 蒸气压, 汽化焓( )等性质参数.     

锌基离子液体BMIZn2Cl5的性质研究

合成了对水和空气均稳定的锌基离子液体五氯化二锌-1-甲基-3-丁基咪唑(BMIZn2Cl5). 在313.15～343.15 K温度范围内, 测定了离子液体BMIZn2Cl5的密度和表面张力. 拟合并估算了BMIZn2Cl5的恒压热胀系数和表面熵, 并根据Glasser理论和离子液体的空隙模型, 讨论了BMIZn2Cl5的热力学性质, 估算出其晶格能和标准熵 , 计算了离子液体的恒压热胀系数α, 与实验值基本一致, 说明了空隙模型的合理性. 并利用Kabo和Rebelo的方法估算了锌基离子液体BMIZn2Cl5的正常沸点, 蒸气压, 汽化焓( )等性质参数.     

过渡金属离子液体EMIFeCl3的性质研究

在干燥高纯氩气氛的手套箱内, 直接将摩尔比为1∶1的高纯无水FeCl3与氯化1-甲基-3-乙基咪唑(EMIC)混合, 得到棕色透明的离子液体EMIFeCl4. 在293.15~343.15 K温度范围内测定了该离子液体的密度和表面张力. 利用Glasser经验方程和空隙模型研究了EMIFeCl4的性质, 并与离子液体EMIAlCl4进行比较, 指出空隙模型具有一定的合理性.     

稀散金属室温离子液体BMIInCl4的性质研究

在干燥高纯氩气氛的手套箱内,直接将摩尔比为1∶1的高纯无水InCl₃与氯化1-甲基-3-丁基咪唑(BM IC l)混合,得到无色透明的离子液体BM IInCl₄.在278.15-343.15 K温度范围内测定了该离子液体的密度和表面张力.利用G lasser经验方程和空隙模型讨论了BM IInCl₄的性质,并与离子液体BMIAlCl₄作了比较,证明了空隙模型具有一定的合理性.     

离子液体四氟硼酸-1-戊基-3-甲基咪唑的物理化学性质的估算

根据标准加入法原理配制一系列含有已知微量水的离子液体四氟硼酸-1-戊基-3-甲基咪唑([C5mim][BF4])样品,在278.15～338.15 K温度范围内,样品的密度与其含水量呈很好线性关系. 利用外推方法确定了含水量为零时[C5mim][BF4]的密度ρ,得到了密度随温度变化的经验方程:ln ρ=0.120 11-5.79×10-4(T-298.15)和离子液体的热膨胀系数α=5.79×10-4K-1. 根据Glasser理论估算了[C5mim][BF4]的标准熵、表面能和晶格能,晶格能较小使离子液体在室温下能以液态形式存在. 利用空隙模型计算得到了[C5mim][BF4] 热膨胀系数α(计算),与实验测定值在数量级上一致,说明空隙模型有一定的合理性.     

甘氨酸离子液体[C3mim][Gly]和[C4mim][Gly]水溶液的表面张力

本文用中和法合成了基于烷基咪唑的甘氨酸离子液体[C3mim][Gly]（1-丙基-3-甲基咪唑甘氨酸离子液体）和[c4miml[Gly]（1-丁基-3．甲基咪唑甘氨酸离子液体）,在298．15K下,0．0400-0．5000molkg^-1浓度范围内测定了不同浓度[C4mim][Oly]和[c3mim][Gly]离子液体水溶液的密度和表面张力,得到了溶液等张比容的实验值,提出了预测不同浓度溶液等张比容的经验方程,利用这个经验方程和李以圭等人提出的溶液表面张力模型,分别估算了这两种离子液体水溶液的表面张力,其估算值和实验值在误差范围内很好地吻合．     

离子液体的分子模拟与量化计算

分子模拟方法是研究离子液体结构与性质关系非常有效的方法,可以从分子间相互作用出发研究离子液体的微观结构、热力学和动力学性质;量子化学计算则在分子、电子水平上对离子液体的结构、性能及催化机理进行理论研究。本文综述了分子模拟方法应用于离子液体体系的研究进展,重点介绍了利用分子动力学模拟和量子化学计算方法对不同离子液体进行研究,获得离子液体的结构性质、光谱性质(红外光谱、拉曼光谱)及离子液体催化反应机理等,为探讨离子液体结构-性质的关系、离子对的作用方式、催化反应活性中心、反应途径、反应活化能、振动模式和频率以及设计功能性离子液体提供理论导向。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.