电感耦合等离子体原子发射光谱(ICP-AES)技术的应用进展

概述了近年来电感耦合等离子体原子发射光谱技术的发展,并分别详细介绍了近年来电感耦合等离子体原子发射光谱法（ICP-AES）在金属材料、地矿、冶金、水质、环境、食品、农业、石油化工、生物、医药等不同领域的应用进展。最后对电感耦合等离子体原子发射光谱分析法的发展前景做了展望。     

电感耦合等离子体原子发射光谱技术的应用进展

概述了近年来电感耦合等离子体原子发射光谱技术的发展,并分别详细介绍了近年来电感耦合等离子体原子发射光谱法(ICP-AES)在金属材料、地矿、冶金、水质、环境、食品、农业、石油化工、生物、医药等不同领域的应用进展。最后对电感耦合等离子体原子发射光谱分析法的发展前景做了展望。     

食品中镉的检测技术

本文综述了近年来国内食品中镉的检测技术,包括火焰原子吸收光谱法、石墨炉原子吸收光谱法、原子荧光光谱法、分光光度法、阳极溶出伏安法、电感耦合等离子体质谱法和电感耦合等离子体原子发射光谱法等传统检测技术,以及生物化学传感器法、免疫分析法、酶分析法和试纸法等快速检测技术(引用文献42篇)。     

炭素中微量元素分析研究进展

介绍了炭素材料中微量元素的测定方法,内容包括国际标准、国外先进标准、中国国家标准和行业标准。测定方法涵盖了重量法、分光光度法、原子吸收光谱法、电感耦合等离子体原子发射光谱(ICP-AES)、电感耦合等离子体质谱法(ICP-MS)、X射线荧光光谱分析法(XRF)等。并阐述了铝用炭素中微量元素测定标准样品的研制。     

地质样品中总锡测定方法的研究进展

综述了地质样品中总锡分析方法(包括容量法、分光光度法、氢化物发生-原子荧光光谱法、原子吸收光谱法、极谱法、原子发射光谱法、电感耦合等离子体原子发射光谱法、电感耦合等离子体质谱法、X射线荧光光谱法)的研究进展。     

波长色散X射线荧光光谱法分析铝箔中9种元素

<正>铝及铝合金中化学成分的测定常用滴定法、分光光度法、原子吸收光谱法[1]、电感耦合等离子体原子发射光谱法(ICP-AES)[2-4]和电感耦合等离子体质谱法(ICP-MS)[5]等方法,这些分析方法准确度高,但样品前处理过程繁琐。对于固体金属材料,若侧重考虑分析速度因素的影响,首选的是火花源原子发射光谱法[6-8],但直接使用火花源原子发射光谱对厚度从0.005~0.10mm不等的铝箔进行检测存     

铁矿石中砷含量的测定方法研究进展

综述了铁矿石中砷含量的测定方法研究进展,主要包括分光光度法、原子吸收光谱法、原子荧光光谱法、电感耦合等离子体-原子发射光谱法、电感耦合等离子体质谱法和X射线荧光光谱法等(引用文献45篇)。     

电感耦合等离子体原子发射光谱法测定氟铍酸铵中的杂质元素

采用电感耦合等离子体原子发射光谱法测定氟铍酸铵中的8种主要杂质元素。以超声辅助溶解样品,然后用电感耦合等离子体原子发射光谱法测定氟铍酸铵中的钠、镁、铝、铬、铁、镍、铜、磷等8种杂质元素,8种元素线性相关系数均大于0.999,测定结果的相对标准偏差为0.65%~1.55%(n=6),检出限在0.2~19.1μg/L之间,定量范围满足氟铍酸铵中8种杂质元素的限量要求。磷的加标回收率为76.7%,其余7种杂质元素的加标回收率在80.9%~95.1%之间,测量准确度满足分析要求。将电感耦合等离子体原子发射光谱法和电感耦合等离子体质谱法进行了比较,两种方法测定结果基本一致。     

食品中微量元素锗的测定方法概述

综述了国内近年来对食品中微量元素锗的测定方法。包括：分光光度法、荧光分析法、原子吸收分光光度法，电感耦合等离子体发射光谱法，极谱法和色谱法。     

食品中无机盐检测方法研究进展

介绍了食品中无机盐前处理和检测技术研究进展,主要阐述了包括火焰原子吸收光谱法、石墨炉原子吸收光谱法、电感耦合等离子体原子发射光谱法、原子荧光光谱法、X射线荧光光谱法及联用等技术在近年来的应用,并对以后的发展方向进行了展望。     

碰撞反应池-电感耦合等离子体质谱法测定膨化食品中的铝

采用密闭高压消解技术对样品进行前处理,建立了膨化食品中铝的电感耦合等离子体质谱测定方法。完善样品前处理条件,优化仪器工作参数,并以45Sc为内标元素消除非质谱干扰,以氦气为碰撞反应气消除质谱干扰。在优化的实验条件下,方法的检出限为13.61μg/L,标准曲线的回归系数为0.999 9。同时采用国家标准方法——分光光度法和原子吸收光谱法验证了方法的准确度,三种方法的测定结果没有显著性差异。实验结果表明,方法简单、快速、准确,适用于食品中铝含量的测定。     

抑制褪色光度法测定油炸面制食品中痕量铝

建立抑制褪色光度法快速测定食品中痕量铝的方法。在硫酸介质中,一定量的铝离子对溴酸钾氧化罗丹明B褪色有抑制作用,据此建立了抑制褪色光度法快速测定食品中痕量铝的新体系,最大吸收波长为550 nm。在1 mol/L硫酸介质中,铝含量在0.07~0.4μg/mL范围内与吸光度具有良好的线性关系,相关系数r=0.9995,检出限为0.02μg/mL。用该方法测定油炸面制食品中痕量铝,测定结果的相对标准偏差为1.3%~3.1%(n=11),加标回收率为99.3%~103.5%。该方法测定结果准确可靠,可用于食品中痕量铝的测定。     

电感耦合等离子体发射光谱法测定面制食品中的铝

建立电感耦合等离子体发射光谱法检测面制食品中铝含量的方法。以硝酸-过氧化氢作为消解体系,样品经微波消解后以5%硝酸定容,测定。对仪器条件进行了优化,铝的分析谱线为396.153 nm,射频功率为1 150 W,雾化气流量为0.5 L/min。铝的质量浓度(X)在0.5~10 mg/L范围内与谱线强度(Y)线性良好,工作曲线方程为Y=1 743.2X+58.0,线性相关系数r=0.999 9;测定结果的相对标准偏差小于5%(n=6),加标回收率为92.8%~107.0%。用该方法与标准方法对面食样品进行测定,两种方法测定结果相一致。该方法简便、灵敏、准确,适用于面制食品中铝含量的测定。     

Electrochemical Study of Potassium Fluoride in a Cryolite-Aluminum Oxide Molten Salt

Selective and efficient electrochemical methods to characterize aluminum are necessary. Current methods are based on potentiodynamic polarization, recurrent potential double pulses, chronopotentiometry, open-circuit chronopotentiometry, and potentiostatic electrolysis, but have not been used to characterize the deposition of aluminum in Na₃AlF₆-Al₂O₃-KF molten salts. The control processes of the formation of aluminum-tungsten intermetallic compounds, and the deposition of aluminum have been investigated by using steady-state potentiodynamic cathodic polarization curves. The dissolution loss rate of aluminum was determined with an increase in KF concentration by the analysis of recurrent potential double pulses. Using chronopotentiometry, it was confirmed that the deposition potential of aluminum shifted more negative as the KF concentration increased, and a higher KF concentrations induced a higher cathodic overpotential. From open-circuit potential measurements and scanning electron micrographs, it was concluded that aluminum(III) ions react with tungsten substrates to form an aluminum-tungsten compound, and the reaction mechanism of aluminum was determined. These electrochemical methods applied with aluminum electrolysis were accurate, efficient, and reliable.     

含Hg等元素的铝基光谱标准样品的制备和定值

阐述含Hg等元素的铝基光谱标准样品的制备工艺及定值结果.在制备过程中,创建了"间接加入法",采用铝箔包裹氯化汞(固态)的方式加入汞,解决了加入的汞元素分布不均匀的难题.采用StndMtrl软件系统进行数据处理和均匀性检验,并通过多家实验室协作分析给出标准值,制备出了含Hg等元素的铝基光谱标准样品.该标准样品满足食品行业...     

Standardization of aluminum oxide and detection of polycyclic aromatic hydrocarbons on aluminum oxide

Luminescence methods are described for detecting polycyclic aromatic hydrocarbons (6-, 5-, 4-, and 3-ring) on aluminum oxide after separation by dry-column chromatography. A method is reported for standardizing the water content in the aluminum oxide used for dry-column chromatography. A water content of 4.74% was chosen to define the activity of aluminum oxide because there was minimum overlap among the PAH bands.     

Poly(HEMA-co-AA) microparticles for removal of aluminum: The reason for Alzheimer's

Aluminum is one of the most toxic metals causing a variety of neurologic diseases, especially Alzheimer's disease. It is impossible to avoid contact with aluminum because of its existence in food to medications. Therefore, removal of aluminum from the blood or wastewater is urgently important. The cost-effective and easy-to-prepare adsorbents are needed to get efficient aluminum removal. For that purpose, the poly(2-hydroxyethylmethacrylate-co-acrylic acid), poly(HEMA-co-AA), microparticles was synthesized to remove aluminum in a very short interaction time. The achievement of the desired polymeric structure was confirmed via Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and transmission electron microscope (TEM), etc. Additionally, particle features such as swelling ratio, size, and surface area were determined. The microparticles synthesized in this study have been determined with very good adsorption capacity even in small aluminum concentrations.     

Effect of preparation methods of aluminum emulsions on catalytic performance of copper-based catalysts for methanol synthesis from syngas

Various Cu/ZnO/Al2O3 catalysts have been synthesized by different aluminum emulsions as aluminum sources and their performances for methanol synthesis from syngas have been investigated. The influences of preparation methods of aluminum emulsions on physicochemical and catalytic properties of catalysts were studied by XRD, SEM, XPS, N2 adsorption--desorption techniques and methanol synthesis from syngas. The preparation methods of aluminum emulsions were found to influence the catalytic activity, CuO crystallite size, surface area and Cu⁰ surface area and reduction process. The results show that the catalyst CN using the aluminum source prepared by addition the ammonia into the aluminum nitrate (NP) exhibited the best catalytic performance for methanol synthesis from syngas.     

6种化学计量学法同时分光光度测定5组分的比较研究及食品分析

优化了在表面活性剂存在下以肉桂基荧光酮同时测定铝、铜、锰、锌、钴的显色折衷条件；比较研究了偏最小二乘、岭回归、多元线性回归、多元逐步回归、目标因子分析和卡尔曼滤波法用于这一体系同时测定此５组分的优缺点，结果表明对于此类所含各组分吸收光谱重叠严重且吸光度加和性欠佳体系，上述６法中以偏最小二乘和岭回归法为最适宜；经用于九种人工合成液和四种食品分析，均获满意结果，分析两种茶叶结果也与ＩＣＰ－ＡＥＳ法一致     

铝形态分析的研究进展

介绍了铝形态分析的意义,环境和生物体系中铝存在的形式,综述了铝形态分析时采用的连续静态浸提法、铝-试铁灵逐时络合比色光度法、酸碱电位滴定、电化学分析、色谱分析、核磁共振及计算机拟合等分析方法(1984—2009年间),引用文献65篇。