含不同链长的三个卟啉LB膜修饰电极的光电响应研究

利用LB (Langmuir-Blodgett)技术将含不同链长的卟啉化合物(C4Py, C6Py和C8Py)单层膜转移到ITO (indium-tin oxide)导电玻璃上, 发现其具有良好的光电转换性质. 卟啉化合物修饰后的紫外吸收光谱与光电流工作谱重叠, 表明卟啉化合物起到了敏化光电流产生的效果; 而且电子给体、电子受体和偏压对其敏化效果的实验结果表明: 光诱导电子转移是产生光电响应的主要原因. 而且, 这三个卟啉化合物的光电响应性质与碳链长度相关, 其中含有六个碳链的C6Py表现出最佳的光电转化效果.     

σ-单键连接的TTF吡啶衍生物对Pb2+的识别

设计合成了一类σ-单键连接的TTF吡啶化合物T4Py和TB,并研究了化合物T4Py对离子的识别作用.结果发现Pb²⁺离子能够引起T4Py的溶液颜色、¹HNMR以及电化学CV的显著变化.     

基于非血红素铁模型配合物[FeⅣ(O)(N4Py)]2+的新型N杂环卡宾配合物的理论设计

基于四价非血红素铁模型配合物[FeⅣ(O)(N4Py)]2+, 通过理论计算设计出一种新型N杂环卡宾配合物[FeⅣ(O)(N4Py)]2+. 采用密度泛函理论B3LYP方法, 计算了[FeⅣ(O)(N4Py)]2+的几何结构和电子结构, 并研究了[FeⅣ(O)(N4Py)]2+使环己烷C-H键羟基化的反应机理. 结果表明, [FeⅣ(O)(N4Py)]2+的五重态能量比基态三重态能量高约5.7 kJ/mol, 故五重态几乎不能参与反应. 赤道方向的配位基N杂环卡宾(NHC)对FeO单元的σ-贡献要大于N4Py的贡献, 而它的空间位阻效应也大于N4Py, 因此2+的稳定性强于[FeⅣ(O)(N4Py)]2+. [FeⅣ(O)(N4Py)]2+的三重态的反应能垒比[FeⅣ(O)(N4Py)]2+的三重态反应能垒高2.0 kJ/mol, 且为单态反应, 所以[FeⅣ(O)(N4Py)]2+的反应活性要高于[FeⅣ(O)(N4Py)]2+.     

导电聚吡咯纳米线的电化学无模板法可控合成与表征

以β-萘磺酸(NSA)为掺杂剂,采用电化学无模板法制备了聚吡咯(PPy)纳米线.研究了NSA浓度、吡咯(Py)单体浓度及反应温度对PPy纳米线形貌的影响.分别采用场发射扫描电子显微镜(FE-SEM)和拉曼光谱对PPy纳米线的结构形貌和化学结构进行了表征.结果表明,利用电化学无模板法可得到中空的PPy纳米线;NSA浓度会影响PPy纳米线的取向性;增大Py单体浓度,可制得圆锥状PPy纳米线;低温有利于合成形状细长、紧密堆积的PPy纳米线.PPy纳米线形貌受游离Py浓度及Py-NSA胶束数量影响,通过调节NSA浓度、Py浓度及反应温度改变游离Py浓度及Py-NSA胶束数量,可制得不同形貌的PPy纳米线.     

荧光探针法研究壳聚糖水凝胶形成过程及其性能

基于芘(Py)单体荧光光谱结构对微观环境变化的敏感性,以及介质粘度及Py分子间距对Py激基络缔合物形成的影响,以戊二醛交联壳聚糖(CS)水凝胶体系为例研究了Py荧光探针法监测水凝胶形成过程及其溶胀性能的可行性。结果表明,Py荧光光谱精细结构的变化(以I~3/I~1为参量)或Py激基缔合物荧光强度与单体荧光强度之比(I~E/I~M)的变化与CS水凝胶的形成及溶胀程度有很好的对应关系。此外,CS凝胶网状结构中包埋的聚N-异丙基丙烯酰胺(PNIPAM)的构象变化也可由探针光谱变化反映出来。利用这种荧光探针方法有助于从分子水平上探知凝胶形成过程的微观本质。此外,这种方法也可作为光纤传导监测凝胶形成过程和溶胀的基础。     

芘从H2O/DMF溶剂向两亲嵌段共聚物平头胶团增溶

发展了从荧光发射谱计算芘（Py）增溶量的方法,以此研究Py从H2O／DMF混合溶剂向PS-b-PAA二嵌段共聚物平头胶团的增溶．实验结果表明,混合溶剂中水含量强烈影响Py的增溶,随水含量增加,Py增溶量增大．结合公式和分布系数,计算并讨论了Py的增溶等温线．理论处理给出了从实验荧光强度直接计算Py在胶团和溶剂相间分布系数的方法     

聚吡咯/多壁碳纳米管及其聚氨酯导电复合材料的制备和性能

以羧基化多壁碳纳米管(MWCNTs)做模版剂,采用化学氧化法将吡咯(Py)在羧基化MWCNTs表面聚合制备PPy/MWCNTs导电材料,将其添加到溶剂型聚氨酯(PU)溶液中制备了PPy/MWCNTs/PU导电复合材料,研究了Py用量对PPy/MWCNTs及其PU复合材料性能的影响.研究表明,随Py用量的增加,PPy/MWCNTs的长度不变,管径增大,sp~2和sp~3杂化C含量先提高后减少,N的掺杂梯度降低,PPy/MWCNTs的导电率高于羧基化MWCNTs和PPy.当Py用量为羧基化MWCNTs的20%时,其导电率最大.PPy/MWCNTs中N元素的掺杂程度及其管径变化是引起PPy/MWCNTs/PU复合材料的性能不同的主要原因.增加Py用量,MWCNTs中亲水的羧基因对PPy掺杂而消耗,相同导电材料用量时纳米导电粒子数目相对减少,PPy/MWCNTs/PU复合材料的耐水性能提高,定向应力、储能模量和玻璃化温度降低,导电率先增加后减小.当Py用量为羧基化MWCNTs的15%时,导电率最大.     

STUDY ON OXO-CENTERED HETEROTRINULEAR TRANSITION METAL CARBOXYLATE COMPLEXES: Ⅱ. CRYSTAL STRUC TURES OF COMPOUNDS [Fe_2MnO(O_2CCH_3)_6Py]·Py AND [Fe_2CoO (O_2CCH_3)_6Py3]·Py

<正> The title compounds are isomorphous, they belong to trigonal space group R32, with crystallographic parameters: [Fe2MnO(O2CCH3)6Py3] ·Py: Mr = 853. 31, a = 17. 609(3), c=11. 056(3)(?), V = 2968. 9(?)3, Z = 3, Dc=1. 43 gcm-3, μ(MoKα) = 10. 9 cm-1, F (000) = 1317; [Fe2CoO(O2CCH3)6Py3]·Py: Mr = 857. 30, a = 17. 542(3), c=11. 049(2)(?), V = 2944. 8(?)3, Z = 3, Dc=1. 45 gem-3, μ (MoKα) = 12. 07 cm-1, F (000) = 1323. The structure of [Fe2MnO (O2CCH3)6Py3]·Py has been determined with the final R = 0. 042 for 663 reflections. The three crystallographically equivalent metal atoms form an equilateal triangle with side of 3. 324(?). The central oxygen aotm is on the three - fold axis with M - O distance 1. 919(?). The planar M3O core is normal to the three -fold axis and also to the solvate pyridine, which is dynamically disordered round this axis and is sandwiched by two Fe2MnO(O2CCH3)6Py3 molecules.     

H_2O/TiCl_4/Py体系引发苯乙烯正离子聚合

研究了在少量吡啶(Py)存在下由水(H2O)四氯化钛(TiCl4)体系引发苯乙烯于二氯甲烷正己烷中进行碳正离子聚合,分别考察[Py]、[H2O]和[TiCl4]对聚合速率、产物分子量与分子量分布的影响.实验结果表明,少量亲核试剂吡啶(Py)对聚合反应起着重要作用,可有效地降低聚合速率和使分子量分布变窄;随着[H2O]和[Py]降低或[TiCl4]增加,聚合产物的分子量增加,而分子量分布指数(Mw Mn)基本维持在1.8左右;随着[Py]增加,聚合速率降低;随着[H2O]和[TiCl4]增加,聚合速率提高.聚合速率对单体浓度呈一级动力学关系,对Py、H2O和TiCl4的反应级数分别为-0.72、0.72和1.86.聚合速率对TiCl4浓度呈接近二级动力学关系,这可能与体系中TiCl4主要以二聚体形式存在有关.聚合转化率和产物分子量均随着反应时间延长而逐渐增大,PS的数均分子量与转化率呈线性增加关系.     

2-羟基吡啶与水氢键作用的理论研究

本文采用量子化学的Hatree-Fock方法和密度泛函理论(DFT)的B3LYP方法,在6-31G(d)水平上,研究了2-羟基吡啶分子(Hy)及其酮式互变异构体2(1H)-吡啶酮(Py)与水的相互作用。考察它们之间在形成Hy…H2O,Py…H2O,Hy…Hy,Py…Py和Hy…Py等复合物前后的能量变化和分子结构参数变化特点。计算结果表明,在这些复合物中都形成了较强的氢键作用,在水合物中,Py与水形成复合物时能量降低较多,与实验结果一致。经过零点振动能(ZPVE)和基组叠加误差(BSSE)校正后的复合物离解能分别为38.3,40.8,73.0,82.7和71.1 kJ/mol(B3LYP/6-31G(d)),水合物的离解能远小于二聚体复合物,而酮式结构的二聚体的离解能最大。     

Electrochemical dimerization of 2-(2'-thienyl)pyridine adsorbed on Au(111) observed by in situ fluorescence

The study of heterodentate molecules adsorbed on metal electrodes provides an opportunity to expand the functionality of modified surfaces while offering insights into the surface and intramolecular electronic interactions of organic adsorbates. The adsorption of 2-(2'-thienyl)pyridine, a molecule containing both pyridine and thiophene moieties, on a Au(111) electrode is reported. Adsorption was characterized by electrochemistry in neutral and basic aqueous electrolyte and was compared to that of pyridine. The aqueous electrochemistry of thiophene on Au(111) was also characterized for comparison purposes. At negative potentials, in the presence of 2-(2'-thienyl)pyridine, a diffuse, pi-bonded monolayer was formed, and a phase transition to a close-packed N- and/or S-bonded configuration was observed near -0.4 V in a 1 mM solution of adsorbate, similar to that seen in pyridine on Au(111). The thiophene-like oxidative dimerization of the molecule was confirmed at positive potentials using in situ fluorescence microscopy by comparison with the spectrum of the chemically synthesized dimer.     

Extending in situ attenuated-total-reflection surface-enhanced infrared absorption spectroscopy to ni electrodes

Surface-enhanced infrared absorption spectroscopy (SEIRAS) in the attenuated-total-reflection configuration (ATR-SEIRAS) has been applied for the first time to Ni electrodes. SEIRA-active Ni electrodes were obtained through initial chemical deposition of a 60-nm-thick Au underlayer on the reflecting plane of an ATR Si prism followed by potentiostatic electrodeposition of a 40-nm-thick Ni overlayer in a modified Watt's electrolyte. The Ni nanoparticle film thus obtained exhibited exceptionally enhanced IR absorption for the surface probe molecule CO while maintaining unipolar and normally directed bands. With the advantages of ATR-SEIRAS, free H2O molecules coadsorbed with CO at the Ni electrode were revealed, and their role in the electrooxidation of the CO adlayer at the Ni electrode is discussed. In addition, the conversion of bridge to linearly bonded CO at Ni electrode in a neutral solution was clearly identified upon electrooxidation of the CO adlayer. ATR-SEIRAS was also used to characterize the adsorption configuration of a pyridine adlayer at the Ni electrode. Both A1 and B1 modes of adsorbed pyridine were detected with comparably large intensities, essentially maintaining the spectral feature of pyridine molecules rather than that of "alpha-pyridyl species", which strongly suggests an "edge-tilted pyridine" configuration present at the Ni electrode, a configuration intermediate between the "end-on pyridine" and "edge-on alpha-pyridyl" adsorption modes reported in the literature.     

吡啶在Au电极上吸附的紫外可见反射光谱法研究

电化学调制紫外可见反射光谱技术可用来测定金属电极上吸附物种的取向和吸附物种与金属表面间的相互作用,金属Au与已研究过的Pb、In和Pt^[1～]具有不同形式的能带结构,吸附物种与电极表面间相互作用的电位依赖性可能不同。本文测定了吡啶分子吸附时Au电极的反射差谱,并试图从能带模型角度探讨吡啶分子与Au电极表面原子间的相互作用。     

TiO2电极表面氰基吡啶吸附的电化学SERS光谱

采用基于核壳纳米粒子的壳层隔绝纳米粒子增强拉曼(SHINERS)以及Au纳米粒子增强技术, 对比研究了4-氰基吡啶(4-CNPy)在TiO2表面的吸附行为. 结果表明, 采用2种技术所获得的光谱存在明显的差别. 利用前者得到了4-CNPy在TiO2电极上随电极电位变化的吸附方式. 在电位为0时, 分子以吡啶环上的N垂直吸附; 随电位负移, 部分分子变为倾斜吸附, 且在电位为-1.0 V时倾斜角度变大. 在正电位区间, 分子始终以吡啶环上的N垂直吸附. 而采用Au纳米粒子滴加在TiO2电极上的方式, 则得到吸附在TiO2, Au及TiO2/Au复合结构上的总光谱信息.     

Comparative electrochemical study of new self-assembled monolayers of 2-{[(Z)-1-(3-furyl)methylidene]amino}-1-benzenethiol and 2-{[(2-sulfanylphenyl)imino]methyl}phenol for determination of dopamine in the presence of high concentration of ascorbic acid and uric acid

The comparative electrochemical behavior of self-assembled monolayers of two Schiff's bases, 2-{[(Z)-1-(3-furyl)methylidene]amino}-1-benzenethiol (FMAB) and 2-{[(2-sulfanylphenyl)imino]methyl}phenol (SIMP) on a bare gold electrode (Au FMAB SAM-modified electrode and Au SIMP SAM-modified electrode, respectively), was investigated by means of cyclic voltammetry and electrochemical impedance spectroscopy in a 0.1 mol L(-1) KCl solution that contains 5.0 × 10(-3) mol L(-1) [Fe(CN)(6)](3-/4-). The results revealed that the modified electrodes showed an electrocatalytic activity toward the anodic oxidation of dopamine by a marked enhancement in the current response and lower overpotential (60 and 90 mV for the Au FMAB and Au SIMP SAM-modified electrodes, respectively) in phosphate buffer solution at pH 6.0. The Au SIMP SAM-modified electrode was applied successfully to the determination of dopamine in the presence of a high concentration of ascorbic acid. Selective detection was realized in total elimination of ascorbic acid response-a method different from the ones based on the potential separations. The detection limit of dopamine was 5.0 × 10(-8) mol L(-1) in a linear range from 1.0 × 10(-6) to 1.2 × 10(-4) mol L(-1) in the presence of 1.0 × 10(-3) mol L(-1) ascorbic acid. The interference studies also showed that the Au SIMP SAM-modified electrode exhibited good selectivity in the presence of a large excess of uric acid and could be employed for the determination of dopamine in pharmaceutical formulations, plasma samples and human urine with adequate selectivity and precision.     

Acetylsalicylic acid electrochemical sensor based on PATP-AuNPs modified molecularly imprinted polymer film

A novel electrochemical sensor based on molecularly imprinted polymer film has been developed for aspirin detection. The sensitive film was prepared by co-polymerization of p-aminothiophenol (p-ATP) and HAuCl(4) on the Au electrode surface. First, p-ATP was self-assembled on the Au electrode surface by the formation of Au-S bonds. Then, the acetylsalicylic acid (ASA) template was assembled onto the monolayer of p-ATP through the hydrogen-bonding interaction between amino group (p-ATP) and oxygen (ASA). Finally, a conductive hybrid membrane was fabricated at the surface of Au electrode by the co-polymerization in the mixing solution containing additional p-ATP, HAuCl(4) and ASA template. Meanwhile, the ASA was spontaneously imprinted into the poly-aminothiophenol gold nanoparticles (PATP-AuNPs) complex film. The amount of imprinted sites at the PATP-AuNPs film significantly increases due to the additional replenishment of ASA templates. With the significant increasing of imprinted sites and doped gold nanoparticles, the sensitivity of the molecular imprinted polymer (MIP) electrode gradually increased. The molecularly imprinted sensor was characterized by electrochemical impedance spectroscopy (EIS), differential pulse voltammetry (DPV), and cyclic voltammetry (CV). The linear relationships between current and logarithmic concentration were obtained in the range from 1 nmol L(-1) to 0.1 μmol L(-1) and 0.7 μmol L(-1) to 0.1 mmol L(-1). The detection limit of 0.3 nmol L(-1) was achieved. This molecularly imprinted sensor for the determination of ASA has high sensitivity, good selectivity and reproducibility, with the testing in some biological fluids also has good selectivity and recovery.     

Multilayer assembly of Prussian blue nanoclusters and enzyme-immobilized poly(toluidine blue) films and its application in glucose biosensor construction

A multilayered glucose biosensor via sequential deposition of Prussian blue (PB) nanoclusters and enzyme-immobilized poly(toluidine blue) films was constructed on a bare Au electrode using electrochemical methods. The whole configuration of the present biosensor can be considered as an integration of several independent hydrogen peroxide sensing elements. In each sensing element, the poly(toluidine blue) film functioned as both the supporting matrix for the glucose oxidase immobilization and the inhibitor for the diffusion of interferences, such as ascorbic acid and uric acid. Meanwhile, the deposited Prussian blue nanocluster layers acts as a catalyst for the electrochemical reduction of hydrogen peroxide formed from enzymatic reaction. Performance of the whole multilayer configuration can be tailored by artificially arranging the sensing elements assembled on the electrode. Under optimal conditions, the biosensors exhibit a linear relationship in the range of 1 x 10(-4) to 1 x 10(-2) mol/L with the detection limit down to 10(-5) mol/L. A rapid response for glucose could be achieved in less than 3 s. For 1 mM glucose, 0.5 mM acetaminophen, 0.2 mM uric acid, and 0.1 mM ascorbic acid have no obvious interferences (<5%) for glucose detection at an optimized detection potential. The present multilayered glucose biosensor with a high selectivity and sensitivity is promising for practical applications.     

Amperometric Hydrogen Peroxide Biosensor Based on the Immobilization of Horseradish Peroxidase (HRP) on the Layer‐by‐Layer Assembly Films of Gold Colloidal Nanoparticles and Toluidine Blue

The precursor film was first formed on the Au electrode surface based on the self‐assembly of L ‐cysteine and the adsorption of gold colloidal nanoparticles (nano‐Au). Layer‐by‐layer (LBL) assembly films of toluidine blue (TB) and nano‐Au were fabricated by alternately immersing the electrode with precursor film into the solution of toluidine blue and gold colloid. Cyclic voltammetry (CV) and quartz crystal microbalance (QCM) were adopted to monitor the regular growth of {TB/Au} bilayer films. The successful assembly of {TB/Au}_n films brings a new strategy for electrochemical devices to construct layer‐by‐layer assembly films of nanomaterials and low molecular weight materials. In this article, {TB/Au}_n films were used as model films to fabricate a mediated H₂O₂ biosensor based on horseradish peroxidase, which responded rapidly to H₂O₂ in the linear range from 1.5×10^?7 mol/L to 8.6×10^?3 mol/L with a detection limit of 7.0×10^?8 mol/L. Morphologies of the final assembly films were characterized with scanning probe microscopy (SPM).     

A comparative study on the viscoelasticity and morphology of polyaniline films galvanostatically grown on bare and 4-aminothiophenol-modified gold electrodes using an electrochemical quartz crystal impedance system and SEM.

The equivalent-circuit parameters of the 9-MHz piezoelectric quartz crystal (PQC) resonance were measured in situ during the galvanostatic polymerization of aniline on 4-aminothiophenol(4-ATP)-modified and bare Au electrodes for ca. 2000 s, respectively. Two polymerization media, 0.100 mol L-1 aniline in 1.0 mol L-1 H2SO4 and in 2.0 mol L-1 HClO4 aqueous solutions, and two values of the current density, 12 and 36 microA cm-2, were used. At identical levels of the resonant frequency shifts in the solutions, obviously greater increases in the motional resistance (R1) were found after aniline polymerization on bare Au electrodes, though the absolute values of delta f0/delta R1 were all large; also, the resonant frequency shifts in air (delta f0g) were considerably smaller for PANI films grown on bare Au electrodes. It is thus concluded that, under identical polymerization conditions, (1) the PANI film grown on a bare gold electrode is rougher, less compact, and can entrap solution more notably; (2) the deposition efficiency of PANI is higher on a 4-ATP-modified Au electrode, owing to a significantly greater observed "dry" frequency shift, and thus a greater "net" mass value of the polyaniline backbone. SEM observations have confirmed that PANI films on 4-ATP-modified Au electrodes were smoother and more compact than those grown on bare Au ones under identical polymerization conditions. In addition, a technique of simultaneous measurements of the electroacoustic admittance of the PQC resonance and the electrochemical impedance was used to monitor the adsorption of 4-ATP onto a PQC gold electrode.     

基于纳米金和硫堇固定酶的过氧化氢生物传感器

在铂电极上自组装一层纳米金(GNs), 构建负电荷的界面, 然后通过金-硫、金-氮共价键合作用和静电吸附作用自组装一层阳离子电子媒介体硫堇(Thio). 再以同样的作用自组装一层GNs和辣根过氧化酶(HRP)的混合物, 最后在电极最外层滴加一层疏水性聚合物壳聚糖(Chit), 由此制备了一种新型的过氧化氢生物传感器. 研究了工作电位、检测底液pH、温度对响应电流的影响, 以及GNs和HRP之间的相互作用, 探讨了传感器的表面形态、交流阻抗、重现性和稳定性. 该传感器的酶催化反应活化能为12.4 kJ/mol, 表观米氏常数为6.5×10^－4 mo/L, 在优化的实验条件下, 所研制的传感器对H₂O₂的线性范围为5.6×10^－5～2.6×10^－3 mol/L, 检出限为1.5×10^－5 mol/L. 应用此方法制备了HRP和葡萄糖氧化酶(GOD)双酶体系葡萄糖生物传感器, 并应用于实验样品葡萄糖含量的测定.