Interfacial Activity of Phosphonated-PEG Functionalized Cerium Oxide Nanoparticles

In a recent publication, we have highlighted the potential of phosphonic acid terminated PEG oligomers to functionalize strong UV absorption cerium oxide nanoparticles, (1) which yield suspensions that are stable in aqueous or organic solvents and are redispersible in different solvents after freeze-drying. In the present work, we highlight the interfacial activity of the functional ceria nanoparticles and their potential to modify hydrophobic surfaces. We first investigated the phosphonated-PEG amphiphilic oligomers behavior as strong surface active species forming irreversibly adsorbed layers. We then show that the oligomers interfacial properties translate to the functional nanoparticles. In particular, the addition of a small fraction of phosphonated-PEG oligomers with an extra C16 aliphatic chain (stickers) into the formulation enabled the tuning of (i) the nanoparticles adsorption at the air/water, polystyrene/water, oil/water interfaces and (ii) the particle/particle interaction in aqueous solutions. We also found that dense and closely packed two-dimensional monolayers of nanoceria can be formed by spontaneous adsorption or surface compression using a Langmuir trough. A hexagonal organization controlled by reversible and repulsive interaction has been characterized by GISAXS. Mono- or multilayers can also be stably formed or transferred on solid surfaces. Our results are key features in the field of polymer surface modification, solid-stabilized emulsions (Pickering), or supracolloidal assemblies.     

Grazing incident small angle x-ray scattering study of polymer thin films with embedded ordered nanometer cells

Analysis of nanostructures is of increasing importance with advances of nanotechnology. Embedded nanostructures in thin films in particular are of recent interest. Grazing incident small angle x-ray scattering (GISAXS) has been recognized to be a powerful method to probe such embedded nanostructures; however, quantitative analysis of scattering pattern is not always trivial due to complex refraction and reflection at surface and interfaces. We prepared nanocellular thin films using block copolymer template with carbon dioxide (CO(2)); CO(2) "bubbles" were formed in the CO(2)-philic block domains. Such nanocellular structures were analyzed by GISAXS and simulated using distorted wave Born approximation (DWBA). Unlike traditional transmission x-ray scattering, GISAXS requires a careful choice of incident angle to analyze the form factor of scatters embedded in a thin film. Nevertheless, the GISAXS measurements under optimized geometry with quantitative calculations using DWBA revealed that the nanocells are spherical and aligned in a single layer of hexagonal lattice and are surrounded by CO(2)-philic block domains.     

Biomimetic creation of hierarchical surface structures by combining colloidal self-assembly and Au sputter deposition

Surfaces of hexagonally packed silica spheres have been functionalized with silanes containing different hydrocarbon or fluorocarbon chains. The resulting chemical and physical structures were studied to establish the effect of surface hydrophobicity on the measured contact angles on the rough surfaces. The results were used to assess the effects of surface modifications on the parameters in the Cassie equation. To achieve superhydrophobicity via a biomimetic approach, we created two-scale structures by first forming hexagonally packed SiO2 spheres, followed by Au deposition on the spheres and heat treatment to form Au nanoparticles on sphere surfaces. Contact angles over 160 degrees were achieved. This work provides improved understanding of the effect of the surface roughness and solid surface fraction on superhydrophobicity.     

Spontaneous formation of fractal structures on triglyceride surfaces with reference to their super water-repellent properties

Alkylketene dimer (AKD), a kind of wax, has been known to form fractal surfaces spontaneously and show super water-repellency. Such formation of water-repellent and fractal surfaces was also found in this work for triglycerides. Since the crystal phase transitions of these waxes were well studied, we studied the formation of their fractal surfaces through contact angle measurements, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). From time-dependent contact angle measurements, it was found that the formation of super water-repellent surfaces with fractal structures occurred spontaneously also on the triglyceride surfaces at different temperatures. The freshly solidified triglyceride surfaces were almost transparent, and their initial contact angles of water were close to 110 degrees. The surfaces then became rough and clouded after being incubated for a certain time at a specified temperature. The super water-repellent surfaces were quite rough and showed fractal structures with the dimension of ca. 2.2 calculated from the scanning electron microscopic (SEM) images by the box-counting method. The phase transformation from a metastable state to a stable cystalline one after the solidification from the melt of triglycerides was clearly observed by DSC and XRD measurements. The fractal crystalline structures and the super water-repellency resulted from this phase transformation and the crystal growth. Ensuring the initial sample solidified into the metastable state and curing the surface at an appropriate temperature are key factors for the successful preparation of fractal triglyceride surfaces by the solidification method.     

直流磁控溅射磁性γ′-Fe4N膜生长机理研究

采用直流磁控溅射法研究了磁控溅射沉积氮化铁薄膜的生长机制,并归属了其生长普适类型.结果表明,磁控溅射法生长的薄膜表面具有自仿射分形特性,而且表面存在一定数量的空位或孔洞,粒子呈现悬臂沉积生长现象.γ′-Fe4N单相薄膜的生长指数β≈0.61±0.02,静态标度指数α≈0.57±0.20,各指数之间的关系为α+α/β≈2,薄膜生长属于KPZ普适类型.     

Formation of superhydrophobic surfaces by biomimetic silicification and fluorination

The amazing water repellency of many biological surfaces, exemplified by lotus leaves, has recently received a great deal of interest. These surfaces, called superhydrophobic surfaces, exhibit water contact angles larger than 150 degrees and a low contact angle hysteresis because of both their low surface energy and heterogeneously rough structures. In this paper, we suggest a biomimetic method, "biosilicification", for generating heterogeneously rough structures and fabricating superhydrophobic surfaces. The superhydrophobic surface was prepared by a combination of the formation of heterogeneously rough, nanosphere-like silica structures through biosilicification and the formation of self-assembled monolayers of fluorosilane on the surface. The resulting surface exhibited the water contact angle of 160.1 degrees and the very low water contact angle hysteresis of only 2.3 degrees, which are definite characteristics of superhydrophobic surfaces. The superhydrophobic property of our system probably resulted from the air trapped in the rough surface. The wetting behavior on the surface was in the heterogeneous regime, which was totally supported by Cassie-Baxter equation.     

Structure versus electron effects in the growth mode of pentacene on metal-induced Si(111)-square root(3) x square root(3) surfaces

The growth of pentacene films on different metal (Ga, Pb, Bi, Ag) induced Si(111)-(square root(3) x square root(3))R30 degrees surfaces is investigated by scanning tunneling microscopy. On surfaces with high atomic surface roughness, such as GaSi-square root(3), beta-PbSi-square root(3), and alpha-BiSi-square root(3), pentacene forms an initial disordered wetting layer followed by the growth of crystalline thin films. The growth behavior is independent of the metallicity of the substrate surface in this regime. On the other hand, on surfaces with low adatom surface roughness, pentacene molecules form self-organized structures without forming a wetting layer. Moreover, the molecular orientation is critically dependent on the surface metallicity. This work reveals that the growth mode of pentacene on solid surfaces is determined by the combined effects of structural and electronic properties of the substrate.     

Combining imaging ellipsometry and grazing incidence small angle X-ray scattering for in situ characterization of polymer nanostructures

A combination of microbeam grazing incidence small angle X-ray scattering (μGISAXS) and imaging ellipsometry is introduced as a new versatile tool for the characterization of nanostructures. μGISAXS provides a local lateral and depth-sensitive structural characterization, and imaging ellipsometry adds the position-sensitive determination of the three-dimensional morphology in terms of thickness, roughness, refractive index, and extinction coefficient. Together μGISAXS and imaging ellipsometry enable a complete characterization of structure and morphology. On the basis of an example of buildup of nanostructures from monodisperse colloidal polystyrene nanospheres on a rough solid support, the scope of this new combination is demonstrated. Roughness is introduced by a dewetting structure of a diblock copolymer film with one block being compatible with the colloidal nanoparticles and one block being incompatible. To demonstrate the potential for kinetic investigations, μGISAXS and imaging ellipsometry are applied to probe the drying process of an aqueous dispersion of nanospheres on such a type of rough substrate.     

Shape change of calcite single crystals to accommodate interfacial curvature: Crystallization in presence of Mg2+ ions and agarose gel-networks

Synthetic calcite single crystals,due to their strong crystal habit,tend to grow into characteristic rhombohedra.In the nature,biogenic calcite crystals form composites together with biomacromolecular materials,spurring investigations of how the growing calcite single crystals change their habit to satisfy the curvature of the organic phase.In this work,we examine calcite crystallization on a flat surface of glass slide and a curved surface of polystyrene(PS)sphere.The crystals exhibit tiny contact area onto the glass substrate that is averagely only 15% of their projected area on the substrate.In sharp contrast,the contact area greatly increase to above 75% of the projected area,once magnesium ions or agarose gel networks are introduced into the crystallization media.Furthermore,the calcite crystals form rough and step-like interfaces with a curved surface.However,the interfaces become smooth and curved as the crystals grow in presence of magnesium ions or agarose gel networks.The discrepancy between the interfacial structures implies kinetic effects of the additives on the crystallization around the surfaces. This work may provide implications for understanding the formation mechanisms of single-crystal composite materials.     

Friction and tribochemical reactions occurring at shearing interfaces of nanothin silver films on various substrates

The tribological and tribochemical properties of 5-10 nm thick Ag films sliding on various metal and inorganic substrates were measured using a surface forces apparatus coupled with ex situ x-ray photoelectron spectroscopy. We observed enhanced chemical reactivity in the sheared regions compared to the unsheared regions, which we attribute to significant frictional heating in agreement with two recent simulations. It is also found that the initial topography (roughness) of the films plays a significant role in determining the friction, wear, and tribochemical reactions. The larger the surface roughness, the larger are the friction coefficients. Initially smooth surfaces, forming large continuous junctions, create large wear debris particles; whereas initially rough surfaces, forming many small junctions, create many small particles. Even though initially smooth surfaces are chemically less reactive than initially rough surfaces, they are tribochemically more reactive, forming two to three times more oxides of silver during shearing than under static conditions and organometals of silver that under normal (static) conditions do not form. The chemical reactions observed cannot be explained without including the tribological processes, such as the local stresses, temperature rises, and type of wear produced by the shearing surfaces.     

Self-assembly of class II hydrophobins on polar surfaces

Hydrophobins are structural proteins produced by filamentous fungi that are amphiphilic and function through self-assembling into structures such as membranes. They have diverse roles in the growth and development of fungi, for example in adhesion to substrates, for reducing surface tension to allow aerial growth, in forming protective coatings on spores and other structures. Hydrophobin membranes at the air-water interface and on hydrophobic solids are well studied, but understanding how hydrophobins can bind to a polar surface to make it more hydrophobic has remained unresolved. Here we have studied different class II hydrophobins for their ability to bind to polar surfaces that were immersed in buffer solution. We show here that the binding under some conditions results in a significant increase of water contact angle (WCA) on some surfaces. The highest contact angles were obtained on cationic surfaces where the hydrophobin HFBI has an average WCA of 62.6° at pH 9.0, HFBII an average of 69.0° at pH 8.0, and HFBIII had an average WCA of 61.9° at pH 8.0. The binding of the hydrophobins to the positively charged surface was shown to depend on both pH and ionic strength. The results are significant for understanding the mechanism for formation of structures such as the surface of mycelia or fungal spore coatings as well as for possible technical applications.     

Asymmetric orientation of toluene molecules at oil-silica interfaces

The interfacial structure of heptane and toluene at oil-silica interfaces has previously been studied by sum frequency generation [Z. Yang et al., J. Phys. Chem. C. 113, 20355 (2009)]. It was found that the toluene molecule is almost perpendicular to the silica surface with a tilt angle of about 25°. Here, we have investigated the structural properties of toluene and heptane at oil-silica interfaces using molecular dynamics simulations for two different surfaces: the oxygen-bridging (hydrophobic) and hydroxyl-terminated (hydrophilic) surfaces of quartz (silica). Based on the density profile, it was found that both heptane and toluene oscillate on silica surfaces, with heptane showing more oscillation peaks. Furthermore, the toluene molecules of the first layer were found to have an asymmetric distribution of orientations, with more CH(3) groups pointed away from the silica surface than towards the silica surface. These findings are generally consistent with previous experiments, and reveal enhanced molecular structures of liquids at oil-silica interfaces.     

Surface versus confinement induced morphology transition in triblock copolymer films: a grazing incidence small angle neutron scattering investigation

The internal nanostructure resulting from microphase separation in triblock copolymer films of polyparamethylstyrene-block-polystyrene-block-polyparamethylstyrene, P(pMS-b-Sd8-b-pMS), has been investigated with grazing incidence small angle neutron scattering (GISANS). X-ray reflectivity, grazing incidence small-angle X-ray scattering (GISAXS), optical microscopy and atomic force microscopy (AFM) complement the investigation. The influence of two limiting interfaces present in confinement is compared to the presence of only one surface. GISANS allows for the detection of structures in the very limited sample volume of confined films as well as for a depth sensitivity to probe the near free surface part of bulk films. With respect to the surface a perpendicular oriented lamella is observed. In contrast to the shrinkage of the characteristic lamellar spacing in confinement at the free surface, a slight increase is determined.     

Preparation and characterization of poly(l-histidine)/poly(l-glutamic acid) multilayer on silicon with nanometer-sized surface structures

The specific design and modification of surfaces is of great interest, especially for functional surfaces and medical applications. In order to obtain films on a surface, the layer-by-layer deposition of polyelectrolytes represents a well-established methodology. The alternating deposition of poly(l-histidine) and poly(l-glutamic acid) results in a defined, continuous surface coating that was thoroughly characterized using X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, ellipsometry, X-ray reflectometry, atomic force microscopy, scanning electron microscopy, contact angle, and electrokinetic measurements. Surface charge, film growth, and final thickness were measured and cross-validated. Additionally, the chemical composition and distribution of polyelectrolytes in the layerstack were determined. Finally, the optical parameters were specified and the surface topography was visualized by several methods. These characterizations revealed a coating with embedded spheroids forming from the bottom layers. This rough surface formed by (PLH/PGA)(8) was highly reproducible and might provide unique features for the design of tailored surfaces.     

Time-resolved ultrathin cobalt film growth on a colloidal polymer template

Cobalt (Co) sputter deposition onto a colloidal polymer template is investigated using grazing incidence small-angle X-ray scattering (GISAXS), scanning electron microscopy (SEM), and atomic force microscopy (AFM). SEM and AFM data picture the sample topography, GISAXS the surface and near-surface film structure. A two-phase model is proposed to describe the time evolution of the Co growth. The presence of the colloidal template results in the correlated deposition of an ultrathin Co film on the sample surface and thus in the creation of Co capped polystyrene (PS) colloids. Well below the percolation threshold, the radial growth is restricted and only height growth is observed.     

Surface activity of solid particles with extremely rough surfaces

The solid particles are adsorbed at liquid-liquid interfaces and form self-assembled structures when the particles have suitable wettability to both liquids. Here, we show theoretically how the extreme roughness on the particle surface affects their adsorption properties. In our previous work, we discussed the adsorption behavior of the solid particles with microstructured surfaces using the so-called Wenzel model [Y. Nonomura et al., J. Phys. Chem. B 110 (2006) 13124]. In the present study, the wettability and the adsorbed position of the particles with extremely rough surfaces are studied based on the Cassie-Baxter model. We predict that the adsorbed position and the interfacial energy depend on the interfacial tensions between the solid and liquid phases, the radius of the particle, and the fraction of the particle surface area that is in contact with the external liquid phase. Interestingly, the initial state of the system governs whether the particle is adsorbed at the interface or not. The shape of the particle is also an important factor which governs the adsorbed position. The disk-shaped particle and the spherical particle which is partially covered with the extremely rough surface, i.e. Janus particle, are adsorbed at the liquid-liquid interface in an oriented state. We should consider not only the interfacial tensions, but also the surface structure and the particle shape to control the adsorption behavior of the particle.     

Friction and Adhesion of Gecko-Inspired PDMS Flaps on Rough Surfaces

Geckos have developed a unique hierarchical structure to maintain climbing ability on surfaces with different roughness, one of the extremely important parameters that affect the friction and adhesion forces between two surfaces. Although much attention has been paid on fabricating various structures that mimic the hierarchical structure of a gecko foot, yet no systematic effort, in experiment or theory, has been made to quantify the effect of surface roughness on the performance of the fabricated structures that mimic the hierarchical structure of geckos. Using a modified surface forces apparatus (SFA), we measured the adhesion and friction forces between microfabricated tilted PDMS flaps and optically smooth SiO(2) and rough SiO(2) surfaces created by plasma etching. Anisotropic adhesion and friction forces were measured when sliding the top glass surface along (+y) and against (-y) the tilted direction of the flaps. Increasing the surface roughness first increased the adhesion and friction forces measured between the flaps and the rough surface due to topological matching of the two surfaces but then led to a rapid decrease in both of these forces. Our results demonstrate that the surface roughness significantly affects the performance of gecko mimetic adhesives and that different surface textures can either increase or decrease the adhesion and friction forces of the fabricated adhesives.     

Surface films of short fluorocarbon-hydrocarbon diblocks studied by molecular dynamics simulations: Spontaneous formation of elongated hemimicelles

Using grazing incidence small-angle X-ray scattering (GISAXS), and atomic force microscopy (AFM) it has been recently demonstrated that linear fluorocarbon-hydrocarbon diblocks (FnHm) self-assemble in water/air interfaces forming elongated and circular hemimicelles. Those structures have been observed for diblocks with at least eight fluorinated carbons. Based on the lack of a collapse pressure for F6H16, and due to the fact that no stable surface pressure values are reached under compression, it has been concluded that these molecules do not form stable monolayers. It has been also suggested that F6H16 and shorter diblocks desorb from the water surface under compression. It is not easy to accept that a significant concentration of so hydrophobic molecules can be stable in aqueous solution even when the employed experimental techniques were not able to clearly detect a well defined structure on the interface. In the present work the adsorption and arrangement of F6H16 and F6H10 at the water surface are studied by molecular dynamics (MD) simulations as a function of the available area per molecule. Starting from a random mixture, the spontaneous formation of elongated hemimicelles is observed for both systems when the area per molecule is higher than approximately 50 A(2). For intermediate areas two pseudo-phases, one rich in hydrocarbons and the other with higher fluorocarbon concentration, are formed. For the systems with less than approximately 30 A(2) available per molecule the formation of multilayers is observed. This is the first time that the dynamics and structure of perfluoroalkane (PFA) films, and in particular of hemimicelles on a liquid surface, are observed and characterized at atomic level.     

Microscale golden Candock leaves self-aggregated on a polymer surface: Raman scattering enhancement and superhydrophobicity

Gold nanoparticles (AuNP's) prepared through a controllable synthesis and aggregation process are attractive for their unique properties that arise from their surface plasmon resonances (SPRs). However, aggregation-controlled AuNP's on amorphous surfaces have not been well explored. In this study, we present a simple in situ synthesis method for preparing AuNP's in which the AuNP's self-aggregate into microscale Candock-leaf-like structures on a polyelectrolyte film (PEF) surface. In this approach, the PEF plays an important role in adsorbing and storing AuCl(4)(-) as well as in controlling the release speed of AuCl(4)(-) in the preparation process. The mechanism for forming these Candock-leaf-like structures has been illustrated by both the growth process of gold nanoparticles and the Ostwald ripenning of the aggregations. AuNP's with a unique structure exhibited significantly enhanced surface Raman scattering and strong superhydrophobicity.