高分子化学键联铑配合物催化剂及其均相对应物对1—己烯、乙烯氢甲酰化的对比研究

本文报导了高分子化学键联多相化铑配合物催化剂的合成,并利用它进行1—已烯氢甲酰化反应,与其均相对应物进行了对比研究。这一多相化催化剂与相应的均相催化剂具有相同的活性,但具有较高的正异构比选择性。动力学研究表明,乙烯气相氢甲酰化反应的速度方程为: r=kP_(C2H4)P_(H2)/P_(CO) 与均相氢甲酰化反应得到的结果相同。     

双膦配体修饰铑催化乙酸乙烯酯氢甲酰化反应(英文)

研究了双膦配体对铑催化的乙酸乙烯酯氢甲酰化反应的促进作用,结果表明,在优化反应条件下,以双膦化合物2,2’-二(二苯膦甲基)-1,1’-联苯(BISBI)为配体时,铑催化乙酸乙烯酯氢甲酰化反应的TOF(转化频率)值达到4000h1,生成2-乙酰氧基丙醛的选择性99%.当在较温和的条件下Rh/BISBI催化乙酸乙烯酯氢甲酰化反应较长时间时TON(转化数)值达到9200,成醛率超过90%,2-乙酰氧基丙醛选择性仍保持99%.     

铑催化烯烃氢甲酰化反应的密度泛函研究

在B3LYP／6-31G(d,P)(Rh和P采用LANL2DZ Polar)水平下,研究了有机膦羰基铑催化乙烯的氢甲酰化反应机理,优化了反应中间体、过渡态和产物的结构．结果表明,乙烯的氢甲酰化反应有两条主要的反应路径,经历了乙烯络合、乙烯插入、膦加成、羰基插入、H2的氧化加成和丙醛还原消除及催化剂的再生等过程．乙烯插入、羰基插入、H2的氧化加成和丙醛还原消除过程中三元环的形成是协同进行的．反应以顺式活性催化剂为起始物,H2的氧化加成是反应速度控制步骤,丙酰基的消除反应是不可逆的．理论结果与实验一致．     

高稳定性无膦配体乙烯氢甲酰化催化体系研究

高活性、高稳定性的无膦配体多相氢甲酰化催化体系研究是催化化学领域的重要课题。本文以乙烯氢甲酰化这一反应为目标,发展出含有不同含氧官能团的活性炭为载体的负载纳米铑催化材料。其中,当以Rh/C-3这一材料为催化剂时,乙烯氢甲酰化反应的转化频率可以达到57889 mol/mol/h。该催化剂可以在固定床反应器上稳定运行2500小时保持活性稳定。表征发现,碳材料表面的内酯基团 (-CO2-)对催化材料的活性和稳定性具有重要的作用。这一研究对高活性、高稳定性的非膦配体多相氢甲酰化催化体系研究具有一定的启示。     

高稳定性无膦配体乙烯氢甲酰化催化体系研究（英文）

高活性、高稳定性的无膦配体多相氢甲酰化催化体系研究是催化化学领域的重要课题.我们以乙烯氢甲酰化这一反应为目标,发展出含有不同含氧官能团的活性炭为载体的负载纳米铑催化材料.其中,当以Rh/C-3这一材料为催化剂时,乙烯氢甲酰化反应的转化频率可以达到57 889 mol/mol/h.该催化剂可以在固定床反应器上稳定运行2500 h保持活性稳定.表征发现,碳材料表面的内酯基团(-CO_2-)对催化材料的活性和稳定性具有重要的作用.这一研究对高活性、高稳定性的非膦配体多相氢甲酰化催化体系研究具有一定的启示.     

温控PEG两相体系催化三聚丙烯氢甲酰化

将具有“高温混溶、室温分相”特征的温控PEG(聚乙二醇)两相催化体系用于三聚丙烯氢甲酰化反应.系统研究了以Rh(acac)(CO)2/TMPGP(TMPGP:P[O(CH2CH2O)nCH3]3,n=8)为催化剂时各种反应条件对三聚丙烯氢甲酰化反应的影响,并考察了催化剂的循环使用效果.在合成气压力6MPa(CO/H2体积比为1)及温度为130℃的反应条件下,三聚丙烯氢甲酰化反应的转化率和醛收率可分别达77%和75%.室温下分离得到的含催化剂的PEG相循环使用11次,催化剂活性基本保持不变,第一次循环的铑流失率为1.5%(质量分数),11次循环的平均铑流失率为0.69%.于-20℃下分相得到的催化剂相可循环使用15次,其催化活性保持不变,第一次循环的铑流失率可降至0.16%.     

聚合物配位体络铑催化剂的合成及对二异丁烯氢甲酰化反应的催化性能研究

本文用含有多胺、多(胺基膦)和单齿的胺基膦、亚磷酸酯等配位基团的功能基化交联聚苯乙烯与二氯四羰基二铑反应得到了10种聚合物配位体络铑催化剂。用这些催化剂进行了二异丁烯的催化氢甲酰化反应(反应条件:110℃;100,80,60kg/cm~2;H_2/CO=1:1;6h;苯为溶剂),大多数催化剂表现出了良好的催化性能。催化剂的红外光谱证明了聚合物多胺配位体与铑活性中心之间具有多齿配位结构。文中还对催化过程的铑脱落现象进行了研究,讨论了配位体结构与铑脱落量及催化活性的关系,测定了铑脱落量与催化剂使用次数关系的曲线,考察了反应条件及外添加试剂对铑脱落的影响,并提出了催化剂可能的铑脱落机制。     

含氮氧阴离子螯合配体的铑络合物的常压氢甲酰化催化性能

铑膦络合物是最常用的烯烃氢甲酰化反应的催化剂,目前改进这类催化剂的活性和选择性大多从选用新型膦配体着手,而很少研究改变铑络合物本身的配位环境.Rh(acac)(CO)_2等一价铑络合物是人们熟知的氢甲酰化催化剂,而类似结构的Rh(ON)(CO)_2型络合物(ON为氮氧阴离子配体)催化剂则尚未见报道.本文研究了Rh(ON)(CO)_2与膦配体组成的体系在常压下对烯烃氢甲酰化反应的催化作用.所用三种Rh(ON)(CO)_2型络合物的结构如下:     

超临界二氧化碳和水复合溶剂中铑膦配合物催化丙烯氢甲酰化反应

 以乙酰丙酮羰基铑为催化剂母体,以水溶性三苯基膦三间磺酸钠(TPPTS)为配体,在超临界CO2和水复合溶剂中成功地实现了超临界条件下的均相丙烯氢甲酰化反应. 最佳反应条件为: 温度55 ℃,铑的浓度15 μg/ml, P/Rh摩尔比18. 在压力为12.0～14.0 MPa下反应6 h后,产物正丁醛/异丁醛摩尔比可达4.3～4.5,丁醛的时空收率达190.1～205.3 g/(g·h). 反应过程中体系处于超临界状态,反应结束后分为水、油两相,铑催化剂溶于水相,产物处于油相,油相中铑的含量仅为1.0 ng/ml,基本上消除了铑的流失,实现了催化剂与产物的有效分离,便于催化剂的回收和循环使用. 与相同反应条件下的水-有机两相氢甲酰化反应相比,超临界CO2和水复合溶剂中的丙烯氢甲酰化反应具有更高的反应速率和产物正异比.     

温控相转移膦配体与催化(Ⅺ):OPGPPRh催化的两相高碳烯烃的氢甲酰化反应

一种连由辛基脂肪醇聚氧乙烯基团的邻苯二酚亚磷酸酯新型水溶性膦配体(OPGPP)与铑原位形成的催化剂应用于高碳烯烃的两相氢甲酰化反应。获得了99.3%的烯烃转化率和97.3%醛收率,催化剂表现很高的活性且催化剂可以回收使用。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.