固相萃取-气相色谱-质谱法检测染毒尿样中芥子气-谷胱甘肽加合物的β-裂解产物

合成并纯化了芥子气-谷胱甘肽的β-裂解产物1,1′-磺酰基二(2-甲巯基)乙烷(SBMTE),纯度为98.9%.建立了固相萃取-气相色谱质谱法检测染毒尿样中SBMTE的方法,对尿样中SBMTE的提取富集、 Oasis HLB固相萃取柱净化条件等因素进行了优化.实验中采用DB-5MS毛细管柱进行分离,以化学电离源(CI)质谱选择离子模式(SIM)进行检测,并通过内标法定量.SBMTE的线性范围为1～100 ng/mL,r=0.9991,回收率为89.0%～92.6%,检出限为0.5 ng/mL.方法满足芥子气中毒人群尿中SBMTE的检测要求.     

液相色谱-离子阱质谱联用分析食品中的对位红

用液相色谱/电喷雾-离子阱质谱联用建立准确测定食品中对位红染料的方法。样品中的对位红用乙腈提取,浓缩后直接进行分析。色谱柱为Agilent C18(4.0×125 mm,5μm),流动相为乙腈-0.5%乙酸溶液(体积比70∶30),等梯度洗脱,流速为0.5 mL.m in-1,外标法定量。质谱采用正离子电离方式,选择m/z156和277碎片离子作为定性离子,以丰度最高的碎片离子m/z277作为定量离子。对位红染料的检出限(LOD)为1.03 ng.g-1,定量下限(LOQ)为3.08 ng.g-1;回收率为86%~112%,重复性好。本法操作简便、灵敏准确,且分析时间较短,分析周期仅需9 m in,适合大批样品的快速分析检测。     

高效液相色谱-三重四极杆复合线性离子阱质谱法检测血液中8种苯二氮卓类药物

建立了血液样本中8种苯二氮卓类药物的高效液相色谱-三重四极杆复合线性离子阱质谱(QTRAP HPLC-MS/MS)检测方法。血液样本经乙腈沉淀蛋白法处理,离心取上清液,过滤后采用分段多反应监测结合信息依赖性采集与增强离子扫描(sMRM-IDA-EPI)模式分析,结合EPI二级谱库检索确证可疑检出物,以sMRM数据采用外标法定量检测。8种苯二氮卓类药物在0.5~50 ng/mL范围内线性关系良好(r>0.998);检出限为0.01~0.10 ng/mL,定量下限为0.10~0.25 ng/mL;化合物在1.0、5.0、20 ng/mL 3个加标水平下的回收率为79.3%~112%,基质效应为79.8%~97.2%,相对标准偏差为4.3%~11%。该方法操作简便,结果准确,适用于中毒患者病情的快速确诊与评估,可为医疗急救与中毒检测提供技术支持。     

液相色谱-串联质谱法同时测定动物血浆中21种霉菌毒素或其代谢物残留

建立了同时检测动物血浆中黄曲霉毒素B1等21种霉菌毒素或其代谢物残留的液相色谱-串联质谱方法.动物血浆样品中加入0.1％甲酸-乙腈溶液、NaCl和无水MgSO4进行萃取,无水MgSO4和C18,PSA,A-AL对提取液进行脱水净化,经浓缩、复溶和离心后,再进行测定.采用反相C18色谱柱分离,以0.1％甲酸-0.5 mmol/L乙酸铵溶液和0.1％甲酸-甲醇溶液作为流动相进行梯度洗脱,采用电喷雾离子源(ESI)多反应监测离子模式(MRM)进行检测,基质标准曲线外标法进行定量分析,线性范围在0.05 ～ 100 ng/mL之间,方法的定量限为0.05 ～0.5 ng/mL.在高、中、低3个添加浓度水平下,21种霉菌毒素的平均回收率为62.0％ ～ 116.4％,相对标准偏差小于19％.     

气相色谱法检测盐酸氟西汀原料中氯仿和正己烷残留量

采用气相色谱法检测盐酸氟西汀原料中CHCl3和正己烷残留量。色谱柱:DB-17(50%二苯基/50%甲基硅氧烷,0.25mm i.d.×30m,0.25μm);载气:H2(30mL/min),AIR(350mL/min),Make up Const col(N2):35 mL/min;进样口温度:250℃;检测器温度:250℃;柱温:60℃;不分流模式;Split柱流速:2mL/min;进样量:1μL。正己烷在157.2~393.0ng范围内,CHCl3在5.88~117.6ng范围内,峰面积与浓度之间线性性关系良好。检出限:信噪比3∶1时,正己烷LOD:2.62ng;CHCl3LOD:2.94ng。定量限:信噪比10∶1时,正己烷LOQ:2.62ng;CHCl3LOQ:5.88ng。正己烷、氯仿理论塔板数分别为171513、206764。本法可检测盐酸氟西汀原料中有机溶剂残留量,为其质量控制提供依据。     

中性解吸电喷雾萃取电离质谱法直接检测蜂蜜中的敌敌畏

采用中性解吸电喷雾萃取电离质谱( ND-EESI-MS)技术,在无需样品预处理的条件下,建立了对蜂蜜中敌敌畏直接快速检测的方法。在正离子模式下,敌敌畏质子化离子峰位于 m/z 223,二级特征离子为m/z 109和127。在优化的条件下,以m/z 127的信号强度为定量指标,建立了蜂蜜中敌敌畏残留的定量检测方法。结果表明,在蜂蜜基质中,敌敌畏在5~1000 ng/mL浓度范围内与m/z 127的信号强度线性关系良好,相关系数为0.998,检出限为1.0 ng/mL(S/N=3);蜂蜜中3个加标水平(10,30和400 ng/mL)的敌敌畏的回收率为93.0％~103.0％,精密度(RSDs)小于4.4％。同时采用气相色谱(火焰光度检测器)方法作为对照方法,检测敌敌畏加标蜂蜜样品,结果表明,加标蜂蜜在5~1000 ng/mL浓度范围内与峰面积线性关系良好,相关系数为0.999,检出限为1.6 ng/mL;10,30和400 ng/mL 3个水平加标蜂蜜的回收率为94.9％~110.3％,精密度小于7.6％。     

气相色谱/质谱-选择离子检测法同时测定大米中的25种持久性有机污染物

利用超声波提取、固相萃取净化对样品进行前处理,然后采用气相色谱/质谱-选择离子检测模式对大米中的25种持久性有机污染物进行了分析。色谱条件:DB-35MS毛细管色谱柱(30 m×0.25 mm i.d.×0.25 μm);载气为氦气,流速1 mL/min;进样口温度300 ℃;不分流进样,进样量1 μL;柱温为程序升温模式。质谱条件:电子轰击电离源,70 eV;采集方式为选择离子方式,扫描质量范围50~450 u。实验采用保留时间以及定性、定量特征离子的丰度比定性,采用峰面积外标法定量,制作了25种持久性有机污染物的标准工作曲线。不同浓度水平的添加回收率试验表明,25种持久性有机污染物的添加回收率为81.99%～100.60%,相对标准偏差为2.37%～18.48%,除异狄氏剂、反式氯丹和顺式氯丹的检测限分别为20,30和20 ng/g外,其他有机污染物的检测限为0.1～5 ng/g。该方法的灵敏度、准确度和精密度均符合农药多残留测定技术的要求。     

液相色谱-串联质谱测定面条和米粉中的硫脲

建立了米面制品中硫脲的液相色谱-串联质谱(LC-MS/MS)测定方法.实验优化了样品提取方法、液相色谱条件和质谱参数.样品用80%乙醇超声波提取,离子交换色谱分离,色谱柱为NUCLEOSIL 100-5SA 阳离子交换柱,流动相为乙腈-(1%乙酸+0.2%乙酸铵)水溶液(30: 70),流速0.5mL/min.采用电喷雾质谱正离子模式电离,多反应选择离子检测,检测离子对为m/z 77/60和m/z 77/43,其中m/z 77/60为定量离子对.结果表明: 本方法简便快速、准确可靠,相对标准偏差＜4.0%;回收率为83%～90%;检出限为0.5 mg/kg;定量下限为 5 mg/kg.     

QuEChERS结合超高效液相色谱-串联质谱法检验腐败血中4-甲基甲卡西酮和甲卡西酮

建立了腐败血中4-甲基甲卡西酮和甲卡西酮的超高效液相色谱-三重四级杆串联质谱(UPLC-MS/MS)检测方法。腐败血样品经乙腈水混合溶液(乙腈:水=4:1,V/V)提取,无水MgSO_4脱水和C_(18)吸附剂净化。选用Waters BEH C_(18)色谱柱分离,0.1%甲酸-水(5 mmol/L乙酸铵)和乙腈作为流动相进行梯度洗脱,电喷雾电离,正离子(ESI~+)模式扫描,多反应监测(MRM)模式检测。4-甲基甲卡西酮和甲卡西酮在0.5～100 ng/mL范围内线性关系良好(R~2≧0.9993),检出限(S/N=3)分别为0.01 ng/mL(4-甲基甲卡西酮)和0.03 ng/mL(甲卡西酮),定量限(S/N=10)分别为0.1 ng/mL(4-甲基甲卡西酮)和0.5 ng/mL(甲卡西酮)。     

固相萃取-气相色谱质谱法测定水体中氯代多环芳烃

本研究建立了固相萃取-气相色谱质谱联用测定水体中6种Cl-PAHs的分析方法。采用poly-sery HLB固相萃取小柱对水样进行富集浓缩,用大体积采样器以2 mL/min的流速过柱,用6 mL的正己烷-二氯甲烷(4∶1,V/V)洗脱,气相色谱-质谱联用、选择离子扫描方式进行定性和定量分析,并采用内标定量法。在对应Cl-PAHs线性范围内的线性相关系数为0.9952~0.9997,检出限与定量限分别为0.013~0.592 ng/L和0.051~0.257 ng/L。除9-Cl Flu(加标回收率为34.4%~45.6%)外,其它Cl-PAHs的加标回收率为77.8%~105.4%。将本方法用于测定南京工业园区及周边水体中Cl-PAHs分析,测得其总浓度为23.594~106.374 ng/L。     

Analysis and assessment of the occurrence, the fate and the behavior of nanomaterials in the environment

Nanomaterials have one dimension <100 nm and possess physico-chemical properties dictated by their unusually small size, large surface area, shape and chemical composition. New properties of nanomaterials have boosted their production and industrial applications in many fields (e.g., microelectronics, catalysis, fuel cells, materials science, textiles, biotechnology and medicine). In biomedical fields, nanomaterials are of the appropriate dimensions to interact with biological matter. However, they may also have negative effects on biological systems. Nanotechnology is a major, innovative, scientific and economic growth area, but the increasing production and use of nanomaterials have led to calls for more information regarding the potential impacts that their release may have on human health and the environment.This review addresses analytical approaches for characterization and quantification of nanomaterials in the environment and recent studies on their occurrence, fate and behavior.     

New study of the stability and of the spectroscopy of the molecular anions NCO- and CNO-

Using highly correlated wave functions, the ground and the low lying excited states of the molecular NCO(-) and CNO(-) anions have been reinvestigated. The stability of the electronic ground state of the two isomers with respect to dissociation and to electron detachment has been checked along the isomerization pathway. The regions of stability of the excited electronic states have been analyzed and identified and it is shown that only the ground state is stable and the corresponding potential energy surface presents three equilibrium positions. The rovibronic spectroscopy of the X (1)Σ(+) state of both NCO(-) and CNO(-) isomers has been determined by a variational approach leading to remarkable agreement with experimental data.     

McBain and the centenary of the micelle

In 1913, J.W. McBain introduced the word “micelle” into surface and colloid chemistry in the context of the association of surfactant molecules in aqueous solution. This article gives a biographic account of McBain, and reviews the early work on micellar aggregation, leading up to the pioneering ideas of G.S. Hartley who introduced the first model of the spherical micelle that we would recognise today.     

The energy pump and the origin of the non-equilibrium flux of the dynamical systems and the networks

The global stability of dynamical systems and networks is still challenging to study. We developed a landscape and flux framework to explore the global stability. The potential landscape is directly linked to the steady state probability distribution of the non-equilibrium dynamical systems which can be used to study the global stability. The steady state probability flux together with the landscape gradient determines the dynamics of the system. The non-zero probability flux implies the breaking down of the detailed balance which is a quantitative signature of the systems being in non-equilibrium states. We investigated the dynamics of several systems from monostability to limit cycle and explored the microscopic origin of the probability flux. We discovered that the origin of the probability flux is due to the non-equilibrium conditions on the concentrations resulting energy input acting like non-equilibrium pump or battery to the system. Another interesting behavior we uncovered is that the probabilistic flux is closely related to the steady state deterministic chemical flux. For the monostable model of the kinetic cycle, the analytical expression of the probabilistic flux is directly related to the deterministic flux, and the later is directly generated by the chemical potential difference from the adenosine triphosphate (ATP) hydrolysis. For the limit cycle of the reversible Schnakenberg model, we also show that the probabilistic flux is correlated to the chemical driving force, as well as the deterministic effective flux. Furthermore, we study the phase coherence of the stochastic oscillation against the energy pump, and argue that larger non-equilibrium pump results faster flux and higher coherence. This leads to higher robustness of the biological oscillations. We also uncovered how fluctuations influence the coherence of the oscillations in two steps: (1) The mild fluctuations influence the coherence of the system mainly through the probability flux while maintaining the regular landscape topography. (2) The larger fluctuations lead to flat landscape and the complete loss of the stability of the whole system.     

Use of Isotope Effects To Understand the Present and Past of the Atmosphere and Climate and Track the Origin of Life

Stable isotope ratio measurements have been used as a measure of a wide variety of processes, including solar system evolution, geological formational temperatures, tracking of atmospheric gas and aerosol chemical transformation, and is the only means by which past global temperatures may be determined over long time scales. Conventionally, isotope effects derive from differences of isotopically substituted molecules in isotope vibrational energy, bond strength, velocity, gravity, and evaporation/condensation. The variations in isotope ratio, such as ¹⁸O/¹⁶O (δ¹⁸O) and ¹⁷O/¹⁶O (δ¹⁷O) are dependent upon mass differences with δ¹⁷O/δ¹⁸O=0.5, due to the relative mass differences (1 amu vs. 2 amu). Relations that do not follow this are termed mass independent and are the focus of this Minireview. In chemical reactions such as ozone formation, a δ¹⁷O/δ¹⁸O=1 is observed. Physical chemical models capture most parameters but differ in basic approach and are reviewed. The mass independent effect is observed in atmospheric species and used to track their chemistry at the modern and ancient Earth, Mars, and the early solar system (meteorites).     

Isolation and identification of the anti-isohumulones and the anti-acetylhumulinic acids

The anti-isohumulones [5-(3-methylbutanoyl)-2-(3-methylbut-2-enyl)-4-hydroxy-4-(4-methylpent-3-enoyl)-cyclopentane-1,3-diones] and the anti-acetylhumulinic acids [5-(3-methylbutanoyl)-2-(3-methylbut-2-enyl)-4-ethanoyl-4-hydroxy-cyclopentane 1,3-diones] have been isolated from an isomerisation reaction mixture of humulone [2-(3-methylbutanoyl)-4,6-di(3-methylbut-2-enyl)-6-hydroxy-cyclohexane-l,3,5-trione] by counter-current distribution and identified by spectroscopic techniques. The formation mechanism is presented and the stereochemical consequences are discussed. The anti-isohumulones are the most bitter hop compounds presently known.     

Decorating step-by-step and independently the surface and the core of dendrons

Dendrons possessing one activated vinyl group at the core and several chlorine atoms at the end of the branches are used as starting materials to study the possibility to react independently the surface functions and the core function. In particular, the most powerful sequence of reactions for decorating them by organometallic complexes as end groups and amine or alcohol at the core has been determined. In the first step, phenol phosphines are grafted as end groups of the dendrons, and they can be used for the complexation of metals. However, these phosphines must be kept free when amines are used to react with the vinyl core in the next step. Depending on the type of phosphine end groups and on the type of function of the core (amine or alcohol), the complexation of ruthenium ([RuCl₂(p-cymene)]₂) and rhodium ([RhCl(COD)]₂) derivatives by the phosphine end groups can occur without side reaction at the core.     

Influence of the molecular structure and the nature of the solvent on the absorption and fluorescence characteristics of rhodamines

A study of the equilibrium of the molecular forms of rhodamine 19 in aqueous and ethanolic solution is carried out by determining the absorption and fluorescence characteristics of the zwitterionic and the cationic forms of the dye. The optical properties of rhodamine 19 are compared with those obtained for rhodamine 6G and also with those previously reported for rhodamine 3B and for the molecular forms of rhodamine B in water and ethanol. Different aspects of the molecular structure of the rhodamines and solvent effects are discussed, as well as their influence on the photophysical properties of the rhodamines. The aggregation of the molecular forms of rhodamine 19 is also studied in water and ethanol.