Ni2(OCH3)2/SiO2催化剂上CO2和CH3 OH的吸附和反应性能

采用表面改性和离子交换相结合的方法制备了Ni2(OCH3)2/SiO2负载型双核金属甲氧基配合物催化剂,利用红外光谱(IR)、程序升温脱附(TPD)、程序升温表面反应(TPSR)和微反技术考察了催化剂的表面结构以及CO2和CH3OH的化学吸附和反应性能.结果表明:Ni2(OCH3)2/SiO2中Ni2+与载体SiO2表面O2-以双齿配位形式键合,甲氧基以桥基形式联结双金属离子形成双核物种Ni2(OCH3)2;CO2在催化剂表面存在甲氧碳酸酯基物种和桥式两种吸附态,CH3OH则只有一种分子吸附态;在100～200℃条件下,CO2和CH3OH在催化剂上的反应产物主要是DMC和H2O;根据反应结果,讨论了催化反应机理.     

经PPh3修饰的Rh/SiO2催化剂的吸附-脱附性能

 应用程序升温技术研究了氢甲酰化反应物CO,H2和C2H4在经PPh3修饰的Rh/SiO2(PPh3-Rh/SiO2)催化剂上的吸附-脱附行为. CO-TPD结果显示, Rh/SiO2催化剂在348, 398和525 K处有3个脱附峰, PPh3-Rh/SiO2催化剂仅在368 K处出现脱附峰,表明催化剂的吸附性能发生了明显变化. 采用原位红外光谱研究了PPh3-Rh/SiO2催化剂上CO的吸附态. 结果表明, 2040 cm-1处吸收峰归属于PPh3修饰的Rh粒子上线式吸附的CO. 这种吸附态既不同于Rh/SiO2多相催化剂表面Rh粒子上的CO吸附态,也不同于相应均相催化剂中的羰基配位态. TPD和FT-IR结果表明,在低压下PPh3-Rh/SiO2催化剂对氢甲酰化反应已具有相当的催化性能.     

乙醇在Mn薄膜／Rh（100）上吸附和分解的研究

应用高分辨电子能量损失谱（HREELS）和热脱附谱（TDS）,研究了Mn薄膜／Rh(100)上乙醇的吸附和分解,提出了表面吸附和分解的反应工,在300K时,蒸镀的Mn在清洁Rh(100)表面上以层层模式生长;在130－300K间,在25mLMn/Rh(100)表面上吸附20L乙醇的TDS结果与乙醇在Rh(100)表面上的结果一致在155K处,脱附出多层凝聚态吸附的乙醇;升温到255K,脱附出H2和CH4,继续升温,出现了与乙醇在R (100)表面上不一致的现象,在470K,同时出现了第2个H2和CH4的脱附峰,在500K,脱附极少量的CO;在950K附近,脱附出大量CO。     

Co-Pd催化剂上CH4/CO2合成乙酸反应中CO2与表面金属物种作用的密度泛函理论研究

采用广义梯度近似(GGA)的密度泛函理论(DFT)(DFT-GGA)对Co-Pd催化剂上CH4/CO2两步法合成乙酸反应中CO2与金属表面物种M—H(M=Co,Pd)和Pd—CH3的插入反应机理进行了研究, 给出了CO2与M—H和Pd—CH3的插入反应机理. 计算结果表明, 在CO2与M—H和Pd—CH3相互作用的4个反应路径中, 反应以CO2与Co—H作用生成产物HCOO—Co为动力学优先路径, 但由于HCOO以双齿形式与金属Co结合, 其结合能较大, 导致HCOO在金属表面不易脱附, 故较难形成甲酸; 反应生成H3CCOO—Pd产物路径次之, H3CCOO和Pd之间结合能较小, H3CCOO容易脱附形成主产物乙酸; 生成H3COOC—Pd反应为动力学最不利路径, 故甲酸甲酯为动力学禁阻产物; 计算结果与实验结果吻合得很好.     

铜,钾助剂对铁基催化剂吸附—脱附性能的影响

气-固相催化反应活性很大程度上依赖于反应组分在催化剂表面上的吸附与脱附行为,因此,研究反应组分在催化剂表面的吸附与脱附性质对了解催化剂表面活性部位分布、催化活性、反应机理等具有重要意义。本文用程序升温脱附(TPD)及稳态化学吸附研究了具有良好催化活性的F-T合成铁基催化剂对CO和H_2的吸附、脱附特性,并讨论了Cu、K助剂的影响。     

La2O3对Ni-Cu/MgSiO催化剂的甲烷部分氧化制氢反应性能的影响

 用等体积浸渍法制备了MgO-SiO2(MgSiO)复合氧化物负载的Ni-Cu双金属催化剂,采用程序升温还原(TPR),X光电子能谱(XPS),红外光谱(IR),程序升温脱附(TPD)及微反技术考察了稀土La2O3的加入对CH4和H2O在Ni-Cu/MgSiO催化剂表面上的吸附及甲烷部分氧化制氢反应性能的影响. 结果表明,加入La2O3使催化剂表面Ni和Cu原子的电子云密度增加,CH4和H2O在催化剂表面上的吸附增强. CH4与O2和H2O在Ni-Cu/MgSiO催化剂上反应的主要产物为H2和CO2. La2O3的加入有利于提高CH4转化率及H2的选择性,并可提高催化剂稳定性及抗积炭能力. 讨论了La2O3的助催化作用机理.     

Ni_2P/SiO_2 和Ni/SiO_2 催化剂甘油氢解反应性能比较:催化剂活性及产物选择性影响因素的探讨(英文)

采用浸渍法及程序升温还原法制备了Ni2P/SiO2和Ni/SiO2催化剂,利用N2吸附-脱附、X射线衍射、X射线荧光、CO化学吸附、氢气程序升温脱附及氨气程序升温脱附等手段对催化剂进行了表征并用于甘油氢解反应.结果表明,Ni2P/SiO2和Ni/SiO2具有相近的表面Ni密度,但前者表面酸中心和表面氢物种(包括吸附氢和溢流氢)密度明显更高,且在甘油氢解反应中的活性也更高,这与其酸性中心与金属中心之间的协同作用有关.Ni2P/SiO2催化剂上主要产物为1,2-丙二醇及1-丙醇,而Ni/SiO2催化剂上主要产物为1,2-丙二醇、乙二醇和乙醇.提高反应温度和H2压力不能促进Ni2P/SiO2上乙醇和乙二醇的生成,但促进了1,2-丙二醇进一步氢解转化为1-丙醇.由此可见,Ni2P/SiO2具有较强的C-O键断裂活性及较弱的C-C键断裂活性,这可能分别与其较多酸性中心和电子及几何结构性质密切相关.     

Ni2P/SiO2 和Ni/SiO2 催化剂甘油氢解反应性能比较:催化剂活性及产物选择性影响因素的探讨（英文）

采用浸渍法及程序升温还原法制备了Ni2P/SiO2和Ni/SiO2催化剂,利用N2吸附-脱附、X射线衍射、X射线荧光、CO化学吸附、氢气程序升温脱附及氨气程序升温脱附等手段对催化剂进行了表征并用于甘油氢解反应.结果表明,Ni2P/SiO2和Ni/SiO2具有相近的表面Ni密度,但前者表面酸中心和表面氢物种(包括吸附氢和溢流氢)密度明显更高,且在甘油氢解反应中的活性也更高,这与其酸性中心与金属中心之间的协同作用有关.Ni2P/SiO2催化剂上主要产物为1,2-丙二醇及1-丙醇,而Ni/SiO2催化剂上主要产物为1,2-丙二醇、乙二醇和乙醇.提高反应温度和H2压力不能促进Ni2P/SiO2上乙醇和乙二醇的生成,但促进了1,2-丙二醇进一步氢解转化为1-丙醇.由此可见,Ni2P/SiO2具有较强的C-O键断裂活性及较弱的C-C键断裂活性,这可能分别与其较多酸性中心和电子及几何结构性质密切相关.     

铬助剂对Cu/ZrO_2/CNTs-NH_2催化剂催化CO_2加氢合成甲醇性能的影响

采用并流共沉淀方法制备了一系列不同铬含量的Cu/ZrO2/CNTs-NH2催化剂,在固定床反应器上考察铬对催化剂催化CO2加氢合成甲醇反应性能的影响.当铬含量为1%(w),反应温度为260°C,压力为3.0MPa,原料气组成为V(H2):V(CO2):V(N2)=69:23:8,空速为3600 mL·h-1·g-1时,催化剂的促进效果最显著,甲醇收率达7.78%.氮吸附、粉末X射线衍射(XRD)、氢气程序升温脱附(H2-TPR)、X射线光电子能谱(XPS)、二氧化碳程序升温脱附(CO2-TPD)、差热分析(DTA)以及扫描电子显微镜(SEM)等表征结果表明,随着铬含量的增加,铜颗粒的粒径减小,催化剂的比表面积增大.铬的加入一方面提高了铜的分散性,抑制了ZrO2的相变和活性组分的烧结;另一方面提高了CO2的吸附量并促进CO2由弱吸附向强吸附转化,从而提高甲醇的收率;但是当铬含量大于1%时,催化剂表面Cu、Zr的总含量明显下降,降低了CO2的吸附量并且形成了超强CO2吸附物种,抑制了CO2及其中间产物的转化,从而降低了甲醇收率.     

不同方法制备的Ni／ZrO2-CeO2-Al2O3催化剂对CH4-CO2重整反应的催化性能

 采用水热合成法、溶胶凝胶法和共沉淀－负载法制备了相同NiO含量的Ni／ZrO2－CeO2－Al2O3催化剂，考察了它们在CH4－CO2重整反应中的催化性能及稳定性，测定了积碳量．用CO2程序升温脱附方法测试了它们的CO2吸附性能，用H2程序升温脱附方法测试了表面Ni的分散度．结果表明，随温度升高，CH4和CO2转化率降低的顺序是：溶胶凝胶法≈共沉淀－负载法＞水热合成法，并且反应产物中n（CO）／n（H2）比随温度升高而降低．水热法和共沉淀－负载法制备的催化剂稳定性好，且前者的活性比后者高；溶胶凝胶法制得的催化剂活性较高，但易失活．积碳量大小顺序是：水热法＞溶胶凝胶法＞共沉淀－负载法．与其他方法制备的催化剂相比，水热法制备的催化剂对CO2的吸附量更大，\r\n而且积碳主要存在于载体上，从而保证了催化剂的稳定性．     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.