p－Si上电沉积Ni－W合金薄膜

利用恒电流沉积法，在ｐ－Ｓｉ上制备出不同Ｗ含量和不同结构的Ｎｉ－Ｗ薄膜，研究了镀液温度，ｐＨ值，电流密度对镀层组成的影响，结果表明，提高温度有利于获得高Ｗ含量的合金．随着镀层中Ｗ含量的增加，Ｎｉ面心立方晶格ｆ．ｃ．ｃ发生正畸变，晶粒平均尺寸变小，当Ｗ含量达到５６％以上时，晶粒小于２ｎｍ，薄膜呈非晶态结构．     

p—Si上电沉积Ni—W—P薄膜的结构与热稳定性

研究了ｐ－Ｓｉ上恒电流沉积Ｎｉ－Ｗ－Ｐ合金薄膜组成与结构的关系，讨论了镀层的组成、结构随沉积时间的变化．测定了非晶合金的晶体结构随热处理温度的改变以及ＤＴＡ曲线，结果表明，非晶Ｎｉ－Ｗ－Ｐ合金在晶化过程中形成两个纳米超微晶相，非晶Ｎｉ－Ｗ－Ｐ薄膜的热稳定性远高于通常使用的非晶Ｎｉ－Ｐ薄膜．     

Na—W—Mn／SiO2催化剂体系中W和Mn对甲烷氧化偶联反应的作用

制备了一系列不同Ｗ,Ｍｎ含量的Ｎａ－Ｗ－Ｍｎ／ＳｉＯ２催化剂,并进行了其催化甲烷氧化偶联反应性能评价和ＸＰＳ,ＸＲＤ表征,研究结果表明,Ｗ和Ｍｎ的含量分别为２．２％≤Ｗ≤８．９％和０．５％≤Ｍｎ≤３％时,催化剂具有较好的甲烷氧化偶联反应性能。Ｍｎ的表面浓度与甲烷的转化率和乙烯的选择性有较好的对应关系,Ｗ的表面浓度与乙烷的选择性有一定有关系,据此提出Ｎａ－Ｏ－Ｍｎ和Ｎａ－Ｏ－Ｗ都是甲烷氧化偶联反应的     

钨—镍—铁系重合金中粘结相的定量测定

通过对９３Ｗ－Ｎｉ－Ｆｅ－Ｃｏ（Ｍｎ）合金中粘结相和钨颗粒化学及电化学性质的研究，提出了一种定量提取Ｗ－Ｎｉ－Ｆｅ系重合金中粘结相的电解液，建立了定量测定其粘结相和钨颗粒组成及含量的方法。     

含聚碳酸酯,4—羟基苯甲酸,己二醇和1,4—苯二甲酸结构的嵌段共聚物的…

以端酰氯基因的热致液晶共聚酯ＨＴＨ－６和端酚羟基的聚碳酸酯齐聚物为原料，通过溶液缩聚法制备了含ＰＣ和ＨＴＨ－６的嵌段共聚物，并用ＩＲ、ＰＯＭ、ＤＳＣ、ＷＡＸＤ等手段对共聚物结构，热行为和结晶行为进了表征。ＤＳＣ和ＰＯＭ结果证明这些嵌段共聚物都属向列型热致性液晶。在２８０℃以睛的温度范围内无相分离，而在较高温度为两相结构，共聚物的结晶结构与ＨＴＨ－６相同，结晶度随ＨＴＨ－６含量增加而增加，结晶速度也     

高电导率的a—SiHY合金的低温电导特性

用射央求地在硅单晶衬底上沉积出电导率高达６０Ｓ／ｃｍ的ａ－ＳｉＨＹ合金薄膜。在２０－３００Ｋ，对于钇含量高的样品，其电导仍是热激活的。ｌｇσ与１／Ｔ的关系曲线能够被拟合成斜率不同的两条直线，直线的斜率和两直线间拐点所地 温度依赖于膜中钇的含量。但对钇含量低的薄膜，电导对温度的依赖关系度为σ∝ｅｘｐ（－１／Ｔ＾１／４）。结果表明，这些钇含量不同的样品在没的温度范围内具有不同的导电机制。     

甲烷脱氢芳构化W／HZSM—5基催化剂的制备

由Ｈ２ＳＯ４酸化的（ＮＨ４）２ＷＯ４溶液制备的Ｗ－Ｈ２ＳＯ４／ＨＺＳＭ－５催化剂对甲烷脱氢芳构化（ＤＨＡＭ）反应的催化活性比不经酸化的ＮＨ４）２ＷＯ４溶液（ＰＨ＝８－９）制备的Ｗ／ＨＺＳＭ－５催化剂高得多,经前驱态催化剂的Ｈ２－ＴＰＲ研究表明,Ｗ－Ｈ２ＳＯ４／ＨＺＳＭ－５试样的还原所需温度经Ｗ／ＨＺＳＭ－５低得多;前者可还原地较低价态的Ｗ物种在负载总Ｗ量中所占比例也比后者高得多,Ｈ２－ＴＰＲ及相关     

Co—WC电极

从钴镀液中添加ＷＣ微粒复合电沉积制备Ｃｏ－ＷＣ镀层，ＷＣ微粒的加入，加快了阴极电化学反应。Ｃｏ－ＷＣ复合电极在碱性溶液中具有优越的电催化析氢性能，并经受了长期间断电解的试验，电极性能稳定。     

Na-W-Mn/SiO2催化剂体系中Na对甲烷氧化偶联制乙烯的作用

制备了一系列不同Ｎａ的含量的Ｎａ－Ｗ－Ｍｎ／ＳｉＯ２催化剂，并进行了它们的甲烷氧化偶联制乙烯反应性能的评价和ＸＰＳ，ＸＲＤ表征。研究结果发现，由于Ｎａ的表面富集引起了Ｗ和Ｍｎ向表面迁移，从而在催化剂表面形成了活化和选择氧化甲烷的Ｎａ－Ｏ－Ｍｎ和Ｎａ－Ｏ－Ｗ活性中心，这表明Ｎａ是甲烷高转化率和乙烯高选择性必不可少的活性组分。     

PP—g—MAZn离聚物的固相法合成与表征

以ＤＣＰＯ为引发剂，将ＰＰ粉末通过固相法与马为酸锌发生接枝反应，合成不同接枝率的ＰＰ－ｇ－ＭＡＺｎ离聚物。考察反应温度，引发剂浓度，单体的用量对接枝率的影响，研究表明，（１）ＰＰ－ｇ－ＭＡＺｎ离聚物的ＦＴＩＲ图中，１５４０ｃｍ＾－１－１６４３ｃｍ＾－１之间出现宽的峰，说明ＭＡＺｎ与ＰＰ发生了接枝反应；（２）ＰＰ－ｇ－ＭＡＺｎ的ＷＡＸＤ谱中在２θ＝１０．６°，３１．２°，３３．２°，处有衍射峰，表明     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.