静电纺丝纳米纤维膜固定化酶及其应用*

静电纺丝是一种简单有效的制备聚合物纳米纤维的技术,在组织工程、药物控释和传感器等方面具有广泛的应用。采用静电纺丝技术制备得到的纳米纤维膜具有比表面积大、孔隙率高和易于分离回收等优点,可以作为一种优良的酶固定化载体,目前在酶固定化领域受到了广泛的关注。本文综述了近年来静电纺丝纳米纤维膜固定化酶的研究进展,在阐述静电纺丝纳米纤维膜制备技术的基础上,详细介绍了纳米纤维膜表面担载法和包埋法固定化酶的原理和方法,分析了不同固定化方法的优缺点,并讨论了静电纺丝纳米纤维膜固定化酶的应用前景,对静电纺丝纳米纤维膜固定化酶的发展方向进行了展望。     

巯基化改性壳聚糖在电化学生物传感器制备中的应用

以壳聚糖、N-乙酰-L-半胱氨酸(NAC)为原料,以1-羟基苯并三唑(HOBt)和1-乙基-3-(3-二甲基胺丙基)碳化二亚胺盐酸盐(EDAC)为缩合剂,合成功能化壳聚糖衍生物巯基壳聚糖(CHS-NAC).用红外光谱(FTIR)、核磁共振(1H-NMR)及X射线衍射(XRD)对其结构进行表征,用Ellman’s试剂通过标准曲线法测得巯基含量.利用CHS-NAC的黏附性,通过层层吸附的方法将CHS-NAC、纳米金及细胞色素c分别修饰到玻碳电极(GC)上,通过扫描电子显微镜(SEM)对修饰电极表面的形貌进行了观察,采用循环伏安和电化学阻抗研究了不同修饰膜电极的电化学行为,及扫描速率对细胞色素c修饰电极的影响,并开展了对过氧化氢的电催化分析.实验结果表明,CHS-NAC能高效地将纳米金及细胞色素c固定在电极表面,并能有效发挥纳米金辅助转移电子及细胞色素c对过氧化氢催化的能力.     

壳聚糖固定化乳酸脱氢酶的制备及酶学性质研究

以磁性壳聚糖作为载体,戊二醛作为交联剂,对乳酸脱氢酶(LDH)进行固定化.固定化的最适条件为:戊二醛浓度6%,pH值7.5,酶的偶联时间2 h.对游离及固定化LDH酶学性质的研究表明,酶促反应的最适pH值为9.2,最适温度分别为37℃和50℃,对乳酸的表观米氏常数分别为1.6 mmol/L和0.9 mmol/L.游离酶和固定化酶在40℃放置150 min后,其活力分别为最初的56.5%和76.1%.固定化酶在4℃贮存4周后,活力仍保留50%以上.固定化酶在室温下与底物重复反应6次后,活力仍保留60%以上,说明固定化酶具有较好的热稳定性、贮存稳定性和复用性.     

漆酶在纳米多孔金上的固定化及其酶学性质研究

利用纳米材料为载体对酶等生物大分子进行固定化近年来引起人们的浓厚兴趣. 以Au/Ag合金为原料, 通过控制浓硝酸的腐蚀时间再辅以退火处理得到了不同孔径的纳米多孔金(NPG), 利用扫描电镜(SEM)和N2气体吸附仪对孔性质进行了表征. 以NPG为载体, 用α-硫辛酸和N-乙基-N’-(3-二甲基氨基丙基)碳酰二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)对金表面进行活化, 通过化学共价偶联的方法对产自Trametes versicolor的漆酶进行了固定化. 比较了孔径大小对酶固定化量及比活力的影响. 发现小孔径更有利于对该漆酶的固定化. 与游离酶相比, 固定化酶的最适pH没有改变, 但最适温度却从原来的40 ℃升到了60 ℃. 固定化后, 漆酶的pH和热稳定性都明显提高了. 重复使用8次仍能保持初始活力的65%, 且在4 ℃下保存1个月几乎观察不到酶活力的下降. 此外, 失活的固定化酶经浓硝酸处理后, NPG载体可重复利用. 本结果初步显示出了NPG在生物技术领域中的应用潜力.     

PVA/DTC纳米纤维的制备及对铅离子的吸附行为

通过高压静电纺丝技术制备了聚乙烯醇/聚乙烯亚胺(PVA/PEI)纳米纤维膜, 对纤维膜进行功能化使其转化为对重金属离子具有高络合能力的聚乙烯醇/二硫代氨基甲酸盐功能化聚乙烯亚胺(PVA/DTC)纳米纤维膜. 研究了PVA/PEI纳米纤维膜的交联和功能化以及PVA/DTC纤维膜对铅离子的吸附行为. 结果表明, 高压静电纺丝法可制备出纤维直径分布均匀、 形貌良好的纳米纤维膜, 且交联、 功能化后仍能保持蓬松纳米纤维状的网状结构. PVA/DTC纳米纤维膜对铅离子吸附速率快, 吸附量容量高, 且具有良好的再生吸附能力, 是一种潜在的重金属离子高效吸附材料.     

磁性纳米氮化铝颗粒固定化β-葡萄糖苷酶的性质

以戊二醛为交联剂,研究了磁性纳米氮化铝颗粒固定化β-葡萄糖苷酶的条件及固定化酶的结构特征,并考察了固定化酶的某些酶学性质.结果表明,在4.5 ml磁性纳米氮化铝颗粒悬液(100 mg/ml)中加入0.5 ml戊二醛溶液(2%)超声波分散后,加入5 ml β-葡萄糖苷酶溶液(50 mg/ml),于20℃,pH 5.0和100 r/min条件下固载3.5 h,酶蛋白和酶活回收率分别为82.6%和78.4%.固定化β-葡萄糖苷酶的结构松散,不改变酶的结构特征.与游离酶相比,固定化酶对对硝基苯基-β-D-葡萄糖苷水解反应的最佳反应温度有所降低,最佳反应pH值有所升高,而米氏常数Km值有所增大,且具有良好的贮存稳定性和操作稳定性,表明磁性纳米氮化铝颗粒适合作为β-葡萄糖苷酶的固定化载体.     

疏水性聚丙烯酸/聚乙烯醇/葡萄糖淀粉酶复合纳米纤维膜的制备及酶学性质

利用混合静电纺丝将葡萄糖淀粉酶(GA)固定于聚丙烯酸(PAA)/聚乙烯醇(PVA)纳米纤维膜上,并通过鉴定固定化GA的酶学特征检验PAA/PVA可否成为一种优良的酶固定化载体。 对其理化性质和酶学特征进行鉴定,经红外光谱(FT-IR)和扫描电子显微镜(SEM)表征发现,GA可成功包埋于PAA/PVA纳米纤维膜内部;对包裹固定的GA进行酶学性质鉴定,发现固定化GA的最适反应温度为68 ℃,比游离GA提高了9 ℃;固定化GA的适用pH值范围明显变宽;热稳定性和存贮稳定性显著增强且可以重复使用。PAA/PVA纳米纤维膜是一种优良的酶固定化载体,可以通过混合静电纺丝包埋法简便地将蛋白质分子固定于其内部,具有一定的应用前景。     

壳聚糖固定化醇脱氢酶的制备及其酶学性质研究

报道了醇脱氢酶(ADH)的固定化和酶学性质研究。以壳聚糖作为载体,戊二醛作为交联剂。固定化ADH的最适条件为:以6%戊二醛将壳聚糖交联2 h,与ADH反应2.5 h。对游离和固定化ADH酶学性质的研究表明:酶促反应的最适pH均为8.2,最适温度分别为37℃和40℃,对乙醇的表观米氏常数Km分别为33.9 mmol/L和46.2 mmol/L。与游离酶相比,固定化酶具有良好的操作稳定性。     

原位红外光谱法研究电纺聚酰胺酸纳米纤维膜热亚胺化过程

以均苯二酐和二苯醚二胺为原料合成聚酰胺酸溶液,通过静电纺丝法制得聚酰胺酸纳米纤维膜.利用原位红外技术研究亚胺化进程,并以优化的条件制得聚酰亚胺纳米纤维膜.研究结果表明,当升温速率为2℃/min时,在350℃可实现100%亚胺化;升温速率过快,纳米纤维膜的亚胺化程度较低;采用快速-慢速相结合的升温方法,则可以有效地提高亚胺化效率.     

新型石墨烯/金/功能导电高分子/过氧化氢生物传感器的制备及应用

石墨烯材料和酶的固定对石墨烯基生物传感器性能及应用至关重要.金电极依次放入氧化石墨(0.05 mg/mL)和氯金酸(0.05 mmol/L)溶液中进行控制电位电解,循环以上操作20次后,转移至2,5-二(2-噻吩)-1-对苯甲酸吡咯单体溶液采用循环伏安法进行电聚合形成含有羧基的导电高分子膜,然后以1-(3-二甲氨基丙基)-3-乙基碳二亚胺盐酸盐(EDC)/N-羟基琥珀酰亚胺(NHS)为活化剂将辣根过氧化物酶共价键合在修饰电极表面制备过氧化氢生物传感器.研究表明,交替电沉积得到的石墨烯/金纳米复合材料分散性好,所制备的生物传感器对过氧化氢的氧化还原过程有显著的催化作用.过氧化氢浓度在2～200 nmol/L之间传感器的电流响应与浓度呈线性关系,相关系数(R2)为0.9996,方法的检测限是0.67 nmol/L(S/N=3),灵敏度明显优于现有文献报道.此外,共价键合方式固定酶使传感器的稳定性和方法的重现性大大提高.5 nmol/L的过氧化氢溶液测定20次,相对标准偏差为1.2%.在4℃下储藏3个月传感器电化学响应变化值少于3%.该方法已成功应用于牛奶样品中痕量过氧化氢的测定.     

Electrospun Poly(acrylonitrile-co-acrylic acid) Nanofibrous Membranes for Catalase Immobilization:Effect of Porphyrin Filling on the Enzyme Activity

Porphyrin-filled nanofibrous membranes were facilely prepared by electrospinning of the mixtures of poly(acrylonitrile-co-acrylic acid)(PANCAA) and porphyrins. 5,10,15,20-Tetraphenylporphyrin(TPP) and its metal-loderivatives(ZnTPP and CuTPP) were studied as filling mediators for the immobilization of redox enzyme. Results indicate that the introduction of TPP, ZnTPP and CuTPP improves the retention activity of the immobilized catalase. Among these three porphyrins, the ZnTPP-filled PANCAA nanofibrous membra...     

Preparation and characterization of stable chitosan nanofibrous membrane for lipase immobilization

Nanofibrous membrane with a fiber diameter of 80-150 nm was fabricated from mixed chitosan/poly(vinyl alcohol) (PVA) solution by an electrospinning process. Field emission scanning electron microscope and transmission electron microscope were used to characterize the morphology of the nanofibrous membrane. It was found that chitosan nanofibrous membrane with stabilized morphology could be prepared through removing most of PVA from the nascent one with 0.5 M NaOH aqueous solution. This treatment also resulted in an obvious decrease in fiber diameter. The stabilized chitosan nanofibrous membrane was explored as support for enzyme immobilization due to the characteristics of excellent biocompatibility, high surface/volume ratio, and large porosity. Lipase from Candida rugosa was immobilized on the nanofibrous membrane using glutaraldehyde (GA) as coupling reagent. The properties of the immobilized lipase were assayed and compared with the free one. Results showed that, the observed lipase loading on this nanofibrous membrane was up to 63.6 mg/g and the activity retention of the immobilized lipase was 49.8% under the optimum condition. The pH and thermal stabilities of lipase were improved after it was immobilized on the chitosan nanofibrous membrane. In addition, the experimental results of reusability and storage stability indicated that the residual activities of the immobilized lipase were 46% after 10 cycles and 56.2% after 30 days, which were obviously higher than that of the free one.     

Immobilization and Properties of Lipase from Candida rugosa on Electrospun Nanofibrous Membranes with Biomimetic Phospholipid Moities

Reported here is a protocol to fabricate a biocatalyst with high enzyme loading and activity retention, from the conjugation of electrospun nanofibrous membrane having biomimetic phospholipid moiety and lipase. To improve the catalytic efficiency and activity of the immobilized enzyme, poly（acrylonitrile-co-2-methacryloyloxyethyl phosphorylcholine）s（PANCMPCs） were, respectively, electrospun into nanofibrous membranes with a mean diameter of 90 nm, as a support for enzyme immobilization. Lipase from Candida rugosa was immobilized on these nanofibrous membranes by adsorption. Properties of immobilized lipase on PANCMPC nanofibrous membranes were compared with those of the lipase immobilized on the polyacrylonitrile（PAN） nanofibrous and sheet membranes, respectively. Effective enzyme loading on the nanofibrous membranes was achieved up to 22.0 mg/g, which was over 10 times that on the sheet membrane. The activity retention of immobilized lipase increased from 56.4% to 76.8% with an increase in phospholipid moiety from 0 to 9.6%（molar fraction） in the nanofibrous membrane. Kinetic parameter Km was also determined for free and immobilized lipase. The Km value of the immobilized lipase on the nanofibrous membrane was obviously lower than that on the sheet membrane. The optimum pH was 7.7 for free lipase, but shifted to 8.3-8.5 for immobilized lipases. The optimum temperature was determined to be 35 ℃ for the free enzyme, but 42-44℃ for the immobilized ones, respectively. In addition, the thermal stability, reusability, and storage stability of the immobilized lipase were obviously improved compared to the free one.     

Electrospinning Preparation of β-Cyclodextrin/Glutaraldehyde Crosslinked PVP Nanofibrous Membranes to Adsorb Dye in Aqueous Solution

The insoluble β-cyclodextrin/glutaraldehyde crosslinked polyvinylpyrrolidone nanofibrous membranes were prepared by electrospinning technique. The membranes were extensively characterized by various techniques including attenuated total reflectance Fourier transform infrared spectroscopy（ATR-FTIR）, X-ray diffraction（XRD）, scanning electron microscopy（SEM） and UV-visible absorption to correlate membrane characteristics with their performance. The adsorption ability of the nanofibrous membranes was tested by performing extraction of Methyl orange（MO） dye in water. It was observed that β-cyclodextrin incorporated in polyvinylpyrrolidone provided the characteristics of high adsorption capacity of polyvinylpyrrolidone. Results of sorption experiments show that the nanofibrous membranes exhibited an adsorption rate of more than 95% for MO and the MO absorbent was 39.82 mg to per gram of fl-cyclodextrin glutaraldehyde（β-CDXFM） crosslinked PVP under the optimized experimental conditions.     

Nanofibrous Membranes Containing Carbon Nanotubes: Electrospun for Redox Enzyme Immobilization

Summary: Nanofibrous membranes that possess reactive groups are fabricated by the electrospinning process from PANCAA solutions that contain MWCNTs. Field emission scanning electron microscopy is used to evaluate the morphology and diameter of the nanofibers. Potentials for applying these nanofibrous membranes to immobilize redox enzymes by covalent bonding are explored. It is envisaged that the electrospun nanofibrous membranes could provide a large specific area and the MWCNTs could donate/accept electrons for the immobilized redox enzymes. Results indicate that, after blending with MWCNTs, the diameter of the PANCAA nanofiber increases slightly. The PANCAA/MWCNT nanofibrous membranes immobilize more enzymes than that without MWCNTs. Moreover, as the concentration of the MWCNTs increases, the activity of the immobilized catalase is enhanced by about 42%, which is mainly attributed to the promoted electron transfer through charge‐transfer complexes and the π system of MWCNTs.

The covalent immobilization of redox enzymes, such as catalase, on a PANCAA/MWCNTs nanofiber.     

Immobilization of cellulase in nanofibrous PVA membranes by electrospinning

Electrospinning is a nanofiber-forming process by which either polymer solution or melt is charged to high voltages. With high specific surface area and porous structure, electrospun fibrous membranes are excellent candidates for immobilization of enzymes. In this paper, immobilization of cellulase in nanofibrous poly(vinyl alcohol) (PVA) membranes was studied by electrospinning. PVA and cellulase were dissolved together in an acetic acid buffer (pH 4.6) and electrospun into nanofibers with diameter of around 200 nm. The nanofibrous membranes were crosslinked by glutaraldehyde vapor and examined catalytic efficiency for biotransformations. The activity of immobilized cellulase in PVA nanofibers was over 65% of that of the free enzyme. Nanofibers were superior to casting films from the same solution for immobilization of cellulase. The activity of immobilized cellulase descended with ascending in enzyme loading efficiency and crosslinking time, which retained 36% its initial activity after six cycles of reuse.     

A nanofibrous composite membrane of PLGA-chitosan/PVA prepared by electrospinning

Tissue engineering scaffolds produced by electrospinning feature a structural similarity to the natural extracellular matrix. In this study, poly(lactide-co-glycolide) (PLGA) and chitosan/poly(vinyl alcohol) (PVA) were simultaneously electrospun from two different syringes and mixed on the rotating drum to prepare the nanofibrous composite membrane. The composite membrane was crosslinked by glutaraldehyde vapor to maintain its mechanical properties and fiber morphology in wet stage. Morphology, shrinkage, absorption in phosphate buffered solution (PBS) and mechanical properties of the electrospun membranes were characterized. Fibroblast viability on electrospun membranes was discussed by MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide] assay and cell morphology after 7 days of culture. Results indicated that the PBS absorption of the composite membranes, no matter crosslinked or not, was higher than the electrospun PLGA membrane due to the introduction of hydrophilic components, chitosan and PVA. After crosslinking, the composite membrane had a little shrinkage after incubating in PBS. The crosslinked composite membrane also showed moderate tensile properties. Cell culture suggested that electrospun PLGA-chitosan/PVA membrane tended to promote fibroblast attachment and proliferation. It was assumed that the nanofibrous composite membrane of electrospun PLGA-chitosan/PVA could be potentially used for skin reconstruction.     

Effect of thermal treatment on the characteristics of electrospun PVDF−silica composite nanofibrous membrane

Composite nanofibrous membranes were prepared by the electrospinning and the thermal treatment from poly(vinylidene fluoride) (PVDF)-tetramethyl orthosilicate (TMOS) blend solutions. The average diameter of nanofibers was reduced with increasing the concentration of TMOS in the solution due to the decrease of the solution viscosity. The EDX spectra confirmed the presence of TMOS on the external surface of the composite nanofibrous membrane. The porosity of membranes was effectively enhanced by the introduction of electrospinning technique. However, the mechanical properties, thermal stability and hydrophobicity were not markedly amplified. Thus the thermal treatment of the composite membranes was carried out, leading to the enormous enhancement of the mechanical properties and hydrophobicity. In addition, XRD results revealed that the crystal structure of PVDF in the composite membranes transformed from α-phase to β-phase due to the formation of silica particles by the thermal treatment.     

Immobilization of Laccase from Trametes versicolor on Chitosan Macrobeads for Anthracene Degradation

Anthracene bioconversion was achieved by immobilized enzyme technology. An oxidation yield of 0.7?mg/L of polycyclic aromatic hydrocarbons reached 60% following 24?h of incubation with laccase from Trametes versicolor covalently immobilized on glutaraldehyde-activated chitosan at the optimal pH of 5 in the presence of diammonium 2,2-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) as the radical mediator. High-performance liquid chromatography indicated that the main product of anthracene oxidation was 9,10-anthraquinone which is less toxic than its precursor. Highly porous 3?mm diameter chitosan macrobeads were synthesized by precipitation in alkaline solution. Support activation with glutaraldehyde was confirmed by elemental analysis, thermogravimetry, and infrared spectroscopy. The bioreactor system was characterized for kinetic parameters obtaining a Michaelis–Menten constant of 0.13?mM and a maximum rate of 0.0011?µmol/min/mg, thermal stability, and reuse. The protein and glutaraldehyde concentrations were optimized to enhance the efficiency of the bioreactor.     

Lipase bound cellulose nanofibrous membrane via Cibacron Blue F3GA affinity ligand

Cellulose (Cell) nanofibrous membranes were prepared by nucleophilic reaction of the cellulose hydroxyl with the triazinyl chloride of Cibacron Blue F3GA (CB) ligand and studied as affinity membranes for lipase enzyme. Cell nanofibrous membranes containing fibers with 200 nm average diameters were prepared by electrospinning of cellulose acetate (CA), followed by alkaline hydrolysis. The CB capacity of the Cell nanofibrous membranes was optimized by lengthening the nucleophilic reaction time and increasing CB concentration and ionic strength. The equilibrium adsorption isotherms of CB on the Cell nanofibrous membranes followed a typical Langmuir monolayer adsorption behavior. At 242 mg CB/g of Cell, the maximum lipase adsorption capacity (q_m) and the dissociation constant (K_d) values were 41.02 mg/g and 0.25 mg/mL, respectively. Optimal lipase adsorption capacity was obtained at pH 4.0, its isoelectric point, with added NaCl on Cell membranes 86 mg CB capacity per g of Cell. A facile lipase loading capacity of 16.21 mg/g of CB–Cell was achieved under moderated conditions and could be optimized to reach at least 150 mg/g. The CB–Cell bound lipase had similar catalytic rate and retained 86.2% activity as in its free form. These findings clearly show that the CB bound Cell nanofibrous membrane is a highly efficient ultra-high specific porous support for lipase enzyme and is potentially versatile for immobilizing other enzymes and as affinity membrane for proteins.